Construction of DEIC ward to first floor of Block-C at District Hospital Ganderbal

Amount

15mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement : 6 fine sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) including scaffolding charges

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 22.1.1.2 Powder coated aluminum (minimum thickness of powder coated 50 microns)

P/F of 4mm thick alminium partations pannel (APP)alstone or equilvent with rubber gaskit and alminium snap beeding complete job

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer- in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm

P/F and installation of hot water gyser of standard make incluidng all fittings and C.P connections complete job (35 ltr)

Providing and fixing kitchen sink including making all connections excluding cost of fittings : White glazed fire clay sink of size 600x450x250 mm.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 550x400 mm including Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

P/F of C.P gratings 100mm dia complete job

P/F of C.P soad dish inlcuding cost of PVC plugs , nuts, screws complet job

P/F of towel rail inlcuding cost of PVC plugs , nuts, screws complet job

P/F of mirror with wooden frame work of specified brand mounted and hard borad inlcuding cost of all necessary fittings complte job

P/F of flush value for wcs of standard make inlcuding cost of necessary fittings complet job

P/F and testing of PVC pipe of standard make including all required fittings complet job 160mm dia

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 32 mm dia. nominal bore

P/F of 4mm thick alminium composite partations pannel (ACP)alstone or equilvent with rubber gaskit and alminium snap beeding complete job

P/F of alminium 0.5mm thick tin foil insulation to cover of heating to pipes used as heat insulation inlcuding cost of necessary frame work inlcuding all necessary fittings complete job

quantity can be varry + -

MUKHTAR AHMAD WAFAI