Repair work of Dhadriya khurd to butati via Dhadriya kallan-manda ki Dhani km0/0 to 21/0 (Under Risk and Cost)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201. By Mechanical Means. In area of non-thorny jungle

Removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil,which shall be paid separately as per Clause 305.3.4 as per MoRTH Specification Clause 301.3.11

Granular Sub-base with Well Graded Material (Table 400-1) By Mix in Place Method. Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Supply of graded broken hard stone aggregates free from Katcha stuff, deleterious and oreganic matter, as per IRC/MoRTH Specifications, including stacking as per the Standard Specifications with an average lead of 20 Kms.53mm to 22.4mm Crusher broken

Labour charges for patching W.B.M. using crushed / broken aggregates including preparation of pot hole scarifying & reshaping to the required grade and camber as per the standard specifications, spreading of material consolidation with mechanical drop hammer of 11.40 kg hand rammer or 8-10 tone power roller, spreading and consolidation of binding material including cost of fuel & lubricants and hire charges of T&P.

Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2