SPL REPAIR TO BUILDING NO P-41 (ELECT SCHOOL) AT 3 EME CENTRE BHOPAL UNDER GE BHOPAL

Amount

Demolition of Asbestos cement(corrugated, semi corrugated etc.) sheet in roof coverings complete all as specified and as directed.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated (profile) steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category C3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self drilling screws and washers as specified including end and side lap, necessary scaffolding and safety measures at any height complete all as specified and as directed.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category C3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self drilling screws and washers as specified including end and side lap, necessary scaffolding and safety measures at any height complete all as specified and as directed.

M & L for cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Taking down cement plaster on stone/brick/concrete surfaces including racking out joint, hacking for key, scrubbing down with water complete all as specified and as directed.

S&F, in repair, Wire netting of galvanised steel wire 1.40mm dia & 12mm size of mesh, fixed with tinned tacks of wire staples complete all as specified and as directed.

M&L, Rendering 15 mm thick in two layers, first layer 10mmthick in CM 1:6 and second layer 5mm thick in CM (1:4) mixed with water proofing compound on fair faces of brick/concrete surface of walls, finishing top surface even and smooth without using cement complete all as specified and as directed. Note:- Supply only water proofing compound shall be measured and paid separately.

M&L, Rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for removal of old decorated treatment on walls/ceilings by scrapping with Asian paint trucare wall sander : L-01/ H-01 having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz xpress sanding machine having suction vacuum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc, preparing the surface and applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof primer with crack filling upto 5 bars of positive hydrostatic pressure on verticle walls without any dilution with forced coverage not more than 3.5 sqm/ ltr as per manufacturer's instructions, all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface for subsequent coats of paint complete all as specified and directed. Make : Apex Ultima Protek Asian paints / Nerolac excel top guards/ Berger weather coat long life 10 as approved by GE.

M & L for preparing new plaster surfaces of walls and applying acrylic distemper in two or more coats, VOC less than 50 gms/ litre as per IS 101 (Part 2/Sec 2), matt finish, medium washability, of approved shade, over a coat of primer as per the manufacturer’s instructions, applying using brush, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note: - The paint shall be as per Tractor Uno Acrylic Distemper of Asian Paints or equivalent make as approved by GE from list of make.

M&L, Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of old painted steel surface of any description exceeding 10cm width or girth and applying one coat of synthectic enamel paint of approved tint complete all as specified and directed.

M & L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr of average thickness 2 mm over the old and new plastered painted wall surface including scrapping to prepare the surface even and smooth and sanding of the putty surface with mechanical wall sander (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. The work shall be carried out by skilled labour as per following steps after preparation of surface:- Step 1 - Mix the putty powder by adding water as per manufacturer's instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 - Apply the first coat of the prepared mix with the help of fully automatic airless spray machine of putty, application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI. Step 3 - Allow 6-8 hours time to dry the putty surface.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) including cover fillets/frames etc complete all as specified and directed.

S & F galvanised cold rolled steel section framed work size 600 mm X 600 mm grid size, 24 mm X 38 mm X 0.60 mm Tee (bottom precoated) and 24 mm X 24 mm X 0.50 mm thick wall angle galvanised cold rolled steel section including suspenders/expansions fasteners etc complete as per manufacturer's instruction as in ceiling complete all as specified and directed. Make: Gabson or equivalent as approved by the GE.

M&L, Asbestos free calcium silicate board of size 600x600x4 mm thick, decorative type, fire resistant, moisture resistant and tested as per IS 14862-2000 fixed to steel frame work as in ceiling, including applying two coats of oil bound distemper complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc incl cleaning, refixing or removal to store complete all as specified and directed.

S&F, Plain, galvanised, mild steel sheeting, 0.63mm thick with grade of zinc coating 275 as in rain water gutters bent to required shape, welded/rivetted and fixed complete all as specified and directed and as per sample displayed with Engineer-in-charge.

S&F, Mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F, in repair, Mild steel works as in hand rails, wind ties, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F, in repair, 200mm dia flue pipes of 1 to 1.5 mm thick of mild steel sheet, black, in suitable lengths including fixing to rain water gutters with adhesive/ silicon gel etc as approved by the Engineer-in-Charge fixed to walls/ columns etc complete all as specified and directed.

S&F, in repair, 200mm dia, bends or elbows (square or raking) with sliding soot door complete of mild steel sheet, black complete all as specified and directed.

S&F, in repair, 0.71mm thick, Plain, Aluminium sheeting, Alloy 31000 H4 as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for 75 mm thick plain cement concrete M10(Nominal Mix) using 40 mm nominal size graded stone aggregates, laid in alternate panel, finished surface even and fair including filling in position with 85/25 industrial grade bitumen mix filler of proportion 80 kg of hot bitumen, 1 kg of cement and 0.25 cubic metre of coarse sand as in plinth protection all as specified and as directed.

M & L for cement concrete M7.5 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate 75 mm thick in sub base for laying tiles, pavings, floorings etc. complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for machine cut kota stone slab, 20-25 mm thick, size not less than 1200 mm x 600 mm (4'x2'), as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including screed bed or bedding layer of cement mortar 15 mm thick in CM (1:6) complete all as specified and directed.

M&L for kota stone slab, 20-25 mm thick as in risers of steps, skirting, etc. laid over and including rendering of 10mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including laying over 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L, Brickwork with fly ash modular size bricks straight or curved on plan exc 6 m mean radius built in Cement mortar (1:6) complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm stone aggregate as in bedding layer/levelling coarse for laying floors complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles, 7mm to 8 mm thick (square /rectangular), joint free tiles, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed.

M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular), area of each tile exceeding 0.18 Sqm, but not exceeding 0.38 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for coloured glazed wall tiles, 300 x450mm x7mm thick, on vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10 mm thick rendering in CM1:3 for backing of tiles complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, coping, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chemfered angle and throating, complete all as specified and directed.

S&F, in repair, Syphonic action type PVC low level flushing cistern 10 ltrs capacity including 32mm dia flush pipe and including PVC connection 600 mm long 15 mm bore with brass heads & washers with connection complete all as specified and directed.

S&F, in repair, vitreous china WC squatting pan "Orissa Pattern", size 580mm x 440mm, white with integral foot rests including provn of cement concrete bedding and 'P' or 'S' trap as required and including connection to trap and to flush pipe, anti syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F, in repair, vitreous china WC pedestal pattern white including plastic WC seat, white closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device including provn of cement concrete bedding and 'P' or 'S' trap as required including connection to trap and to flush pipe, anti syphonage pipe, etc. complete including joint of flush pipe and socket of WC, making good to floor complete all as specified and directed.

S&F in repair, toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair, plastic WC seat and cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device

S&F in repair, health faucet (ABS body) mid steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook incl making connection and fixed in position complete all as specified and directed.

S&F in repair, soap dish, chromium plated fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair, 100mm dia CP grating complete all as specified and directed.

S&F in repair, stainless steel 20 mm dia curtain rod/curtain rails with fancy type bracket, hanging and fixing on wall complete all as specified and directed.

S&F in repair, vitreous china wash basin, white, size 550 x 400 mm, flat back, including PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, including PVC waste coupling, PVC connection 15 mm etc complete all as specified and directed.

S&F, 15 mm Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F, in repair, PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F, in repair, 15 mm bore stop cock (angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F, in repair, 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut (concealed type), screwed down, screwed for iron pipe or union complete as specified and directed.

S&F, in repair, 15 mm bore Bib taps, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete as specified.

S&F, in repair, 15 mm bore pillar taps, cast copper alloy, with capstan heads chromium plated with crutch or butterfly handle, screwed down high pressure, with or without lettered 'Hot' or 'Cold', with long screwd shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F, in repair, brass chromium plated towel rail 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F, in repair, Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including CP urinal spreader complete all as specified and directed.

S&F, in repair, vitreous china urinal partition white of size 310x700 mm terminating about 40 cm above floor line complete all as specified and directed.

Taking up or down 50 mm bore GI steel tubing and connections complete all as specified and directed.

Taking up or down 25 mm bore GI steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm bore GI steel tubing and connections complete all as specified and directed.

S&F, 20 mm bore, GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors including cuttings through walls, floors etc and making good surface complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections complete all as specified and directed.

S&F, 15 mm bore, GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors including cuttings through walls, floors etc and making good surface complete all as specified and directed.

S&F, 50 mm bore, GI tube medium grade with all necessary fittings laid in trenches complete all as specified and directed.

S&F, 25 mm bore, GI tube medium grade with all necessary fittings laid in trenches complete all as specified and directed.

S&F, 20 mm bore, GI tube medium grade with all necessary fittings laid in trenches complete all as specified and directed.

Refixing 50 mm bore of steel tubing and connections in new or old positions (walls, ceilings, floors, etc.) complete all as specified and as directed.

Refixing 25 mm bore of steel tubing and connections in new or old positions (walls, ceilings, floors, etc.) complete all as specified and as directed.

Refixing 20 mm bore of steel tubing and connections in new or old positions (walls, ceilings, floors, etc.) complete all as specified and as directed.

S&F, in repair, 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, in repair, 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.

S&F, in repair, 75 mm CI floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame n exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) proof and & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be included in the item) (Make :- M/s Rajshri plastiwood /Jain wood Industries/M/s Goel Brothers,/M/s Goyal Industries/M/s Pioneer Timber Chandigarh as approved by GE).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeas per manufacturer instruction complete all as specified and directed. (Make :- M/s Accucell/M/s Dura plast Extrusion/M/s Rajshri Plastiwood/M/s Sintex Industriesas approved by GE).

S&F, factory made 100% solid PVC flush shutter 28 mm thick, made from Co- Extruded three layer rigid PVC foam sheet (single Extruded) with density not less that 600 kg/cbm outer layer (0.8-1 mm) thick should be of rigid PVC with density of not less than 1400 kg/cum, shutters shall be water proof, Termite proof, fire retardant & having good screw holding capacity complete as per manufacturers instructions and as directed.

S&F, Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeas per manufacturer instruction complete all as specified and directed. (Make :- M/s Accucell/M/s Dura plast Extrusion/M/s Rajshri Plastiwood/M/s Sintex Industriesas approved by GE).

S&F, 200 mm, Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed.

S&F, 250 mm long, aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F, 100 mm, mild steel butt hinges medium weight,cold rolled complete all as specified and directed.

S&F, 150 mm, Aluminium handles, cast type, anodised complete all as specified and directed.

S&F, 140 mm, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F, powder coated aluminium fabricated work as in doors, windows, partition as per manufacturer instruction complete including necessary jointing cleats, glazing clips, anodised aluminium snap beading with neoprane rubber packing, screws etc complete all as specified and directed. Note:The quoted rate is included for necessary fittings for door/window i.e handle, tower bolt, butt hinges, filling of gap between wall and window by silicon gel etc complete all as specified and directed.

S&F, powder coated (min thickness of powder coating 50 micron) aluminium work as in windows/ventilators shutters fixed type without sash bars, aluminium section weighing 0.55 kg/m as per manufacturers instruction complete including necessary jointing cleats, glazing clips, aluminium snap beading, neoprene rubber packing, screws etc handles 02 Nos each complete all as specified and directed. Note:The quoted rate is included for necessary fittings for door/window i.e handle, tower bolt, butt hinges, filling of gap by silicon gel etc complete all as specified and directed.

S&F, in repair, 9 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to aluminium/timber frame work complete all as specified and directed.

S&F, in repair, Welded steel wire fabric of weight n exc 4 Kg per Sqm, supplied and fixed complete to wood or steel members at roof etc complete all as specified and directed.

M&L for Mild steel frame work such as grills, gratings, railings, frame work of water tanks and the like conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F, in repair, Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, thickness of laths 1 mm complete all as specified and directed.

S&F, 4.00 mm thick sheet glass, frosted / figured one side and glazing with oil putty/ aluminium beading and glazing clips in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F, galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to aluminium /metal/wooden surrounds with aluminium/ metal/wooden beading complete all as specified and directed.

Hacking out old broken glass (any thickness and any size) from steel/wooden frame complete all as specified and directed.

S&F, 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty/ aluminium beading and glazing clips in square n exc 0.5 sqm in each pane fixing to wooden/ metal frames complete all as specified and directed.

S&F, 4.8 mm thick sheet glass, obscured or frosted one side ordinary quality and glazing with oil putty/aluminium/metal beading and glazing clips in square exc 0.5 sqm in each pane fixing to wooden/ metal frames complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M & L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)

M & L for concealed point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on the same board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)

M & L for concealed point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)

M & L for point wiring for one 3 pin/ 5 pin/ 6 pin 5/15 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 2.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)

M & L for point wiring for one 3 pin/ 5 pin/ 6 pin 5/15 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 4 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 4 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)

S&F, switch piano, flush type, single pole, one way, 5/6 Amps complete all as specified and directed

S&F, lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings and including LED Lamp, 10Watt, B22, CDL complete all as specified and directed.

S&F, Socket outlet, flush type, 5/6 Amps, 2 in 1, 5 Pin complete all as specified and directed.

S&F, Socket outlet, flush type, 2 in 1, 5 Pin, 5/6 and 15/16 Amp, flush type complete all as specified and directed.

S&F, switch piano, flush type, single pole, one way, 15/16 Amps complete all as specified and directed

S&F, in repair, Sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 6 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 25 mm nominal size including all accessories and fixed on walls and 6 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note 1- Two runs of 6 sqmm main cable, one run of 6 sqmm earth cable and one run of conduit shall be measured and paid as one unit length. Note 2- Cost of cutting chase and making good shall be included in the quoted rate.)

S&F, in repair, LED light fittings consisting separate batten and tube lights, including both batten and tube lights, 1 X 20 W, 220 V, AC, decorative box type, polycarbonate housing, lumen output of minimum 2000, integral electronic driver (SMPS based constant current output) with output short circuit protection, over voltage protection, surge voltage protection upto 2 kVs, protection grade IP20, CRI greater than 80%, THD less than 10%, power factor of minimum 0.95, life span of minimum 50000 working hours including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F LED light fittings mirror type with high output diffuser consisting separate batten and tube lights, including both batten and tube lights, 1 X 10 W, 220 V, AC, decorative box type, polycarbonate housing, lumen output of minimum 1000, integral electronic driver (SMPS based constant current output) with output short circuit protection, over voltage protection, surge voltage protection upto 2 kVs, protection grade IP20, CRI greater than 80%, THD less than 10%, power factor of minimum 0.95, life span of minimum 50000 working hours including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F LED light fittings 1 X 9 W or 1 X 10 W bulkhead luminaries, 220 V, AC, frequency of 50 Hz, polycarbonate housing, lumen output of minimum 850, integral electronic driver (SMPS based constant current output) with output short circuit protection, over voltage protection, surge voltage protection upto 2 kVs, CRI greater than 80%, THD less than 10%, power factor of minimum 0.90, life span of minimum 50000 working hours including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Disconnecting and taking down main switches/MCB DBs of any capacity/type including MCBs complete all as specified and as directed.

S&F, Sheet metal enclosures for MCCB, DB, VTPN, double door, 415V, 4 way with 200 Amps rated bus bar complete all as specified and directed.

S & F MCCB, Fixed Thermal & Fixed Magnetic setting, 4 pole, 415 volts, 16 kA, 125 A including taking down complete all as specified and as directed.

S & F double door MCB Distribution board of sheet metal enclosure, single pole and neutral, 12 way with 200 Amps rated bus bar, 240 volt, IP43 protection grade and fixed with and including wooden rectangular board of first quality of suitable size & PVC plug and screws and grouted in wall with M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed.

S & F, RCBOs for earth leakage, overload & short circuit protection, double pole, 100mA, 63 Amp complete all as specified and as directed.

S&F, 6 to 32 Amp rating 240V, 10KA 'C' curve, miniature circuit breaker (MCB), Single pole complete with connecting, testing and commissioning complete all as specified and directed.

Taking down old ceiling fan and depositing to storeyard of AGE E/M and S&F ceiling fan, AC, 50 Hz, single phase, 230 V, 1200 mm sweep, minimum air delivery 210 m³ per minute, minimum service value 6 m³ per minute per watt, 3 Nos metal blades protected with corrosion resistance paints, with brushless DC motor sensorless, ISI marked including capacitor to ensure power factor more than 0.9, five star rating as per Bureau of Energy Efficiency including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

S&F, LED 24 watt recess mounting light fitting (2x2 luminaire), with CRCA powder coated white, high power LEDs and aluminium front frame with flat white high power transmission acrylic cover including connecting with PVC insulated multistranded copper flexible cable 0.5 Sqmm two core and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified and as directed. Make - Orient Cat Pt No/Model No. LTRAQ-24-C or equivalent as approved by GE from 'List of Makes' complete all as specified and as directed.

Taking down old ceiling fan and depositing to storeyard of AGE E/M and S&F, Exhaust fan, steel body AC single Phase, 230V of size 450m sweep with, blades, and frame and louvers complete all as specified and directed.

M&L for Earthing with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers etc of galvanised iron all as shown in elect plate No.3 of SSR Part-3 connected to earthing test point including GI light grade 20mm bore proction pipe and including necessary excavation & earth work in any type of strata, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chember with 40mm thick RCC 1:2:4 type B1 cover slab with 8mm dia TMT bars at 150mm c/c both ways with MS Hook 8mm dia MS bars etc complete all as specified and directed and testing on completion. Note : (i) Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode shall be included in quoted unit rate. (ii) Earth work in any type of soil i.e. excavation, returing filling and removal is also included in quoted unit rate. (iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, manholes, etc not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm layers with exacaveted soil complete all as specified and directed.

Removing excavated material (Soil) not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.

Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling, hand punning down complete all as specified and as directed. Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly.

Supply and laying, sub class 'B', burnt bricks, modular size as cable protection cover complete all as specified and directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 3 core with reduced neutral conductors (3½ core), nominal cross sectional area of main conductor 35 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. including taking down old unservicable cable complete all as specified and as directed.

Supplying & laying in trenches 25 mm nominal bore, light grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Taking down old unservicable valve and S&F, 20mm bore, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Taking down old unservicable valve and S&F, 25mm bore, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

JYOTI ENTERPRISES

RAJPATI CONSTRUCTION

M/s VIKAS TRADERS

M/S RAKESH TRADERS

RAGHAVAY CORPORATION

AJIT ENTERPRISES

Vee kay construction

CREATIVE CONSTRUCTION

M/S AJAY JAIN