RFP FOR Supply, Installation, Testing and Commissioning of ICT based solutions for Smart Classrooms including Civil Infrastructure development works in 24 Schools (85 Classes) and 5 Years Comprehensive Annual Maintenance Contract (CAMC) in Moradabad

Amount

Cost for Smart Class Room

Interactive touch Panel

Green Board (as required)

Sine wave UPS 1 KVA

MS Office Professional 2019 (Academy) with perpetual license

Sound System (Speakar)

Gooseneck Microphone per classroom

CCTV Camera Supply and installation

1TB HDD and NVR (16 Chenal)

Manageable Network Switch for Schools.

Structural Cabling with accessories (200mtrs for one class)

6 U, Network rack for schools.

Lease Line Connectivity for 2 Mbps (for 5 Years)

Biometric Machine

Cost for E-Content Software

Content Development and required perpetual licenses for Class 1st to 8th

Cost for Training and Capacity Buildings

Capacity building trainers

Training Materials / Misc.

Cost for Comprehensive Annual and Maintenance Contract

CAMC for 5 Years

Manpower

Project Manager (1 Nos.)

School Cordinator (8 Nos.)

JUNIOR HIGHSCHOOL,MAJHOLA (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL,POLICE LINE (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

Finishing wall with one coat of water proof cement paint weather coat of approved quality on previously new surface with this paint to give an even shade including supply of all materials , labour , Tools & plant etc. required for propercompletion of the work.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

COMPOSITE SCHOOL,COURT ROAD,DAANG (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

COMPOSIT SCHOOL KASHIRAM NAGAR (CIVIL WORKS)

EARTHWORK

Excavation in foundation in ordinary soil (Loam,Clay or sand ) including lift up to 1.50M, and lead up to 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineering charge upto a distance of 30 M. from the foundation trenches, (Where machine can not each/move). For building work only

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. From the site of work and including watering, dressing etc. Rate to include cost of all materials labour T&P etc. required for proper completion of work.

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

COMPOSITE SCHOOL LAKDI MUFTITOLA (CIVIL WORKS)

EARTHWORK

Excavation in foundation in ordinary soil (Loam,Clay or sand ) including lift up to 1.50M, and lead up to 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineering charge upto a distance of 30 M. from the foundation trenches, (Where machine can not each/move). For building work only

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. From the site of work and including watering, dressing etc. Rate to include cost of all materials labour T&P etc. required for proper completion of work.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

BRICK WORK

M-150 brick work in 1:4 (one cement and six fine sand of 1.25 F.M. mortar) in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of work.

Brick Work 1:4 (one cement and six fine sand of 1.25 F.M. mortar)in Superstructure including necessary cutting and moulding of brick as required thickness of wall not to be less than 11/2 brick.

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

Finishing wall with one coat of water proof cement paint weather coat of approved quality on previously new surface with this paint to give an even shade including supply of all materials , labour , Tools & plant etc. required for propercompletion of the work.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

COMPOSIT SCHOOL MUGALPURA (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

JUNIOR HIGH SCHOOL FAIZGANJ (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:1.5:3 in R.C.C. R.C.C.Columns. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

JUNIOR HIGH SCHOOL LODHIPUR (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

Finishing wall with one coat of water proof cement paint weather coat of approved quality on previously new surface with this paint to give an even shade including supply of all materials , labour , Tools & plant etc. required for propercompletion of the work.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

JUNIOR HIGH SCHOOL MAU,kanth road (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

KANYA JUNIOR HIGH SCHOOL KUNDANPUR (CIVIL WORKS)

EARTHWORK

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. From the site of work and including watering, dressing etc. Rate to include cost of all materials labour T&P etc. required for proper completion of work.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

BRICK WORK

M-150 brick work in 1:4 (one cement and six fine sand of 1.25 F.M. mortar) in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of work.

Brick Work 1:4 (one cement and six fine sand of 1.25 F.M. mortar)in Superstructure including necessary cutting and moulding of brick as required thickness of wall not to be less than 11/2 brick.

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

KANYA PRIMARY SCHOOL MAJHOLA (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

KASTURABA SCHOOL (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

KATGHAR PURVI BALAK (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL BHATTAVALI (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

Finishing wall with one coat of water proof cement paint weather coat of approved quality on previously new surface with this paint to give an even shade including supply of all materials , labour , Tools & plant etc. required for propercompletion of the work.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL BHEEMA THER (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL DHAKKA LINE PAR (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL GANDHI PARK CIVIL LINE (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL KAJIPURA (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL KANYA DANG (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL MANPUR NARAYANPUR (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL RAMLILA GROUND (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL SARAI GULJARIMAL (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL SAHPUR TIGARI (CIVIL WORKS)

EARTHWORK

Excavation in foundation in ordinary soil (Loam,Clay or sand ) including lift up to 1.50M, and lead up to 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineering charge upto a distance of 30 M. from the foundation trenches, (Where machine can not each/move). For building work only

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. From the site of work and including watering, dressing etc. Rate to include cost of all materials labour T&P etc. required for proper completion of work.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

BRICK WORK

M-150 brick work in 1:4 (one cement and six fine sand of 1.25 F.M. mortar) in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of work.

Brick Work 1:4 (one cement and six fine sand of 1.25 F.M. mortar)in Superstructure including necessary cutting and moulding of brick as required thickness of wall not to be less than 11/2 brick.

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Fine dressing of the ground.

Providing & injecting chemical emulsion for constructional antitermite treatment with drilling holes at junction of floors with walls and pillars, the application of chemicals shall be as per relevant IS Code and the rate of application of chemical shall also be as provided in the IS Code, inluding quarterly inspection and proving required treatment for one year. As direction by the Engineer Incharge.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

PRIMARY SCHOOL SIKANDARPUR TIGARI (CIVIL WORKS)

CONCRETE & REINFORCED CEMENT CONCRETE

R.C.C. Work with cement approved coarse and 4 cm.gauge approved stone grit in proportion of 1:2:4 in R.C.C. raft foundation and footing. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse

FINISHING

12mm. Thick plaster with one part of cement and two part of approved coarse sand including supply of all materials labour and completion of work . Including making of groove in plaster surface.

Finishing walls with superior quality water proof cement paint / snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand prepairing and supply ofall material labour T&P etc. required for proper completion of work

Providing and laying vitrified floor tiles ( BELL / KAJARIA/ SOMANI or other standard make ) in different sizes (thickness to be specified by the manufacturer)with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) including grouting the joints with white cement and mathing pigments etc,complete

Repair Works

Spreading over leaky roof with bitumen at 1 liter per sqm including sweeping cleaning the roof with brushes , heating of the paint up to the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand at 1 cft per 100 sft and including supply of all materials labour and T&p etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 Meter ( 200 feet ).

Providing and fixing water closet aquatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or Strap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever)conforming to Is 7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-incharge with in a distance of 60 meter (200 feet)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. Complete as per direction of Engineer-in-charge.

Distempering one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar Asian paint after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.

SOLAR POWER STREET LAMP

Supplying, installing, testing and commissioning Solar street light Each pole comprising of 14W LED fitting, 12V min. 75AH maintenance free Lithium Battery, min. 75Wp SPV module, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. B-Grade GI Pole of 6 Mtr. height alongwith brackets, foundation, earthling and necessary accessories complete as per specification no. ESD-SOL-STL

INSTRUCTIONAL SIGN BOARD

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

EQUIPMENT (SUPPLY & INSTALLATION)

Supply & Installation of Swing for Children's at School

LANDSCAPING

Fine dressing of the ground.

MISCELLANEOUS WORKS

Dismantling reinforced cement concrete or reinforced brick work including stacking of matrials as directed by the engineer in charge with in a distance of 60 meter (200 feet)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer in change with in a distance of 60 Meter ( 200 feet)

Supply and fixing in position of Stainless Steel Dust-bin including all material required for fixing etc, all complete under instruction of Engineer in Charge.

Painting with graffiti on wall surface as per specification and under instruction of Engineer-in-charge.

Supply & Installation of Water RO, all complete as per technical specification referred to bid document

Amtrak Technologies Private Limited

PROBIT PLUS PRIVATE LIMITED

M/S PENTAGON TECH FUSION SERVICES PRIVATE LIMITED