Package for Construction of Garden, Liabrary and toilets in various gardens in Owala-Majiwada Constituency of Thane Municipal Corporation limits

Amount

Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed, dewaterin, preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary complete. ( Spec.No. : Bd.A.1Page no 259/ CSR Page No.150

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast insitu/Ready Mix cement concrete in M15 of trap /granite /quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc.complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may benecessary for foundation and other parts of the the work sand pumping out water during and after excavation as maybe required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Super intending Engineer will be necessary)

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc.complete.

Providing and laying Cast insitu/ReadyMix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft,strip foundations,grillage and footings of R.C.C.columns and steel stanchion set. including bailing out water,Steel centering, work,coverblocks, laying/pumping,compaction and curing roughening the surface if specia lfinish is to be provided (Excluding reinforcement and structural steel)etc.complete,with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/concrete Batch mix plant(Panmixer)etc.complete.With fine aggregate(Crushed sand VSI Grade)

Providing and laying Castin situ/Ready Mix cement concrete M-25 of trap /granite /quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoot hand even surface or roughening if special finishis to be provided and curing etc.complete, (Excludingreinforcementandstructuralsteel).withfullyautomaticmicroprocessorbased PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering,formwork,coverblocks,laying/pumping, compaction and roughening the surface if special finishis to be provided and curing etc.complete.(Excluding reinforcement and structural steel).with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/concreteBatch mix plant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast insitu/Ready Mix cement concrete in M-25 of trap /granite /quartzite /gneiss metal for R.C.C. Pardi of required thickness including steel entering, formwork, coverblocks, laying /pumping, compacting and rough ening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Panmixer)etc.complete.With fine aggregate (Crushedsand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap /granite /quartzite/gneiss metal for R.C.C.slab sand landings as per detailed design sand drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give as mooth and even surface or rough ening if special finishis to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position HCRM /CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules .including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete

Providing and applying a base coat comprising of 1KilogramPolydee-MC and 1Kilogramfresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete

Providing waterproof plaster in W.C. and bath 20mm thick for dado in cement mortar 1:3 with neat finishing, float in gusing waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.

Providing and applying waterproofing treatment using acrylic polymer modified cement based waterproofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre/ Kilogram with two coat using approved chemicals form asonryandconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.

Providing and laying jointless Polydee-LM, a highly flexible elastom etriccoating for RCC /cementitious surface for terrace waterproofing on B.B. Coba /R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dustand foreign matter) application of 1st coat of Polydee-LM @ 700gms/ One Square Metre and applying 2nd coat of Polydee-LM @ 700gms /One Square Metre and finishing the same with sprink lingthe AG-10 granuleson the wetcoating. (After finishing covering the treatment with 25 mm cement plaster for protection with fibr illated 6mm Plyplast fibre @ 125gms /One Square Metre to be paid inseparate item.) covering 7years guaranteeon Court Fee Stamp Paper of Rs. 100/- etc. complete

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram /per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1Kilogram /bag of cement grouting and finishing the toplayer with 20 mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1Kilogram /per bag of cement and testing the treated portion for 48hours by pond test and covering ten years' guaranteeon requisite stamp paper including curing etc. complete.

Providing and constructing masonryin Auto claved Area claved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III1984 of size (625x240x225) mm in extra fine jointing mortar of fixo block of in superstucture including, striking joints, racking out joints watering and scaffolding etc.complete

Providing and constructing masonryin Auto claved Area claved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III1984 of size (625x240x225) mm in extra fine jointing mortar of fixo block of in half brick thick wall including 2 hoop iron strips 25mm x 1.6mm at every third course,properly bend and bonded at ends

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. Complete

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing internal cement plaster 20mm. Thick in Single coats in cement mortar 1:3 with out neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 12mm thick in a single coat in cement mortar 1:3 with out neeru finish to concrete surface in all positions in cluding scaffolding and curingetc. complete.

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 with out neeru finish to concrete surface in all positions in cluding scaffolding and curingetc. complete.

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing thesurface

Providing and applying two coats Apex Ultima Puranature Anti- Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx,formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 kg/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for FLOORING in required position laid on a bed of bonding chemical filling joints curing and cleaning etc .complete

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for SKIRTING in required position laid on a bed of bonding chemical filling joints curing and cleaning etc .complete

Providing and laying telephone black / Amba White / Cadburybrown /Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

Providing and laying Vitrified STONE EFFECT FINISH having decorative type tiles of size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc.

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000)(Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.

Providing and fixing in position powder coated aluminium louvered windows /ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete

Providing, laying and fixing P.V.C. pipe of 15 mm dia. with fittings such as bends, tees, reducers, clamps, etc. in cluding necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, laying and fixing P.V.C. pipe of 25 mm dia. with fittings such as bends, tees, reducers, clamps, etc. in cluding necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, laying and fixing P.V.C. pipe of 50 mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and fixing screw down for 15 mm dia. Wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 25 mm dia. Wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 50 mm dia. Wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing European typ ewall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall,100mmdia.G.I.plugbend inlet pipe all fittings, cuttingand making good walls, floors etc. complete

providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete

Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black /coloured granite of 180 mm thick stone black kadappa frame work including chromium plated coupling bottle-Trapusing CERA company o requivalent ovaltypa wash basin model no 3448 as per detailed drawing or as directed by engg in charge etc complete. (Countersize1.20mx 0.60 m )

Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.

Providing and laying for 150 mm dia salt glazed stone ware pipe including fittings Suchasbends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75Kilogramwith lid and frame fixed in cement concrete.

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Providing and fixing 15 cm x 10 cm salt glazed stone ware gully trapin cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stone ware pipe, brick masonry chamber with cast iron lid and cast irong rating for the gully trap.

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted /bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. (For Gazeboo) Spec. No. : As directed by Engineer-in-charge.

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 kg/sq.m.).

Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 mc/ coras required and horizontal pipes of 25 mm dia in three rows, all pipes of 2mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use)

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete

Providing and fixing informatory sign boards of size 60 cm x 80 cm made out of 14 guage Aluminum sheet bonded with IRC Specified colour of retro reflective sheeting of Type IV High Intensity Micro- Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in 1:4:8 concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Alluminium sheet Type IV High Intensity Micro-Prismatic Grade Sheeting.

Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete.

Providing, fabricating and supplying and fixing panels of aluminium composite panel (ACP) cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite steel panel material consisting of 3mm thick FR grade mineralcore sandwiched between two aluminium sheets(each 0.50mm thick). The aluminium composite panel cladding sheet shall be coil coatd with kynar 500 base PVDF/Lumiflon based fluropolymer resin coating of approved colour and shades on face 2 as specified using steinless steel screw, nuts, bolts, washers, clets, weather silicon,sealent,backers rods etc. The supporting frames structure shall be made of aluminium rectangular section 38x38 mm. The fastening brackets of aluminium alloy 6005 T5/MS with hot deep galvinised.(As per previous approved rate)

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery upto destination hoisting and fixing of accessories such as inlet, outlet over flowpipe in clusive of all tanks capacity between 200 to 1000 liters

Providing and fixing 45 cm wide mildsteel ladder of 40mm x 6mm mildsteel flat stringers and steps of 18 mm dia. Mildsteel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60 cm x 30 cm x 30 cm and painting the ladder complete. (AntiCorossive Paint)

Transportation of excavated earth including loading and unloading per truck trip of 6.00 cubic meter capacity per trip (With Machine Loading for 25 Lead in km)

Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete

Providing and Fixing Rubber flooring with 100mm p.c.c. & 100 soling.

Litre bins-SS Dust Bin two sides for extra strength during oscillating movement. Oscillating arrangement for easy unloading of Garbage. Area :0.765 SQMT , Capacity In Litres 42 Ltrs, Height : 0.92m -MCGM FMR rate

Providing & Fixing FRP Pargola (Size 8.1 mt X 3.3 mt X 0.4 mt in wood Finish) with 4 Coloumns of size 2.8 mt X 0.45 mt X 0.45 mt) with necessary finishing work etc. complete

Providing & Fixing FRP Statue Height 3.6 mt (Quation) As derected by Enginner -in- Charge

Providing & Supplying & installation of Air walker etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Seats & Waist Machine etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Abdomen Rack etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Pull down device etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Sit & Push up device etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Pendal trainer & parallel bar etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Walking machine etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Health ridding machine etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Body building seesaw etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Torsinal weast treadmill etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of leg recovery machine etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Seated leg body frame etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of lumbosacral device etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Double wking machine etc.complete.Spec.- As Directed Engineer-in-charge.

Mural Painting - Cleaning of existing mural and removal of old paint of the existing mural followed by PU paint grade esdee paints or duco paints having application of 2 coats and final coat of clear PU paint matt or glossy finish, as directed by engineer in charge.etc. complete. -SSR Item no. 48.14

3D painting - Designing, Conceptualization & painting of 3D artistic on any surface at all height and location as directed. The paint should be used for the artistic painting is high quality acrylic paint. painting should be coated with weather proof warnish.

Designing, Providing & Installation of Wall mural related to freedom fighter, outside the jail wall as shown in the picture below . The material for this sculpture is Fibre/FRP . The Length of the mural should be minimum 15m with minimum height of 3 m, Size of the mural shall be in proportionate to the height of the sculpture. Thickness of FRP material should be 5-10mm. Including all cost of design, Making models (if any), making mural, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCC- M20 Grade Concrete including Reinforcement(TMT/FE 500), Pedestal including all material required for fixing the mural, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of mural, polishing and painting of the mural, as directed by Engineer in Charge. (Variation in size off mural shall be +-10% in Length, Width and Height shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete.

Stamped concrete- Providing, placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5 kg per SQMT, including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable, 30% solids clear sealer @ 150 to 250 gms per SQMT using surface roller and protecting from falling dust, dirt, etc complete as per the specifications and directions of Engineer-in-Charge or Landscape Architect. (The base concrete shall be paid seperately as per the type or grade of concrete from USOR 2013 Concrete Works chapter.)(Refer sketch 30)

Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCCpardi /Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Woodenchips, Silicasand, Cement, GFRC admixtures, Colourpigments, Fiber uptothick of 230mm /25mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)

Providing 75 m dia Gas Pipes

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes,weight and types and load bearing capacity as per EN-124,equivalent NECO with prior approval of concerned Superitending Engineer.

Making of Musical sculpture, size - height 3 meter /width 2 m. GRC glass reinforced concrete material, Birla white cement. with ms truss fabrication/armechar

Providing and laying Cast insitu/Ready Mix cement concrete in M-25 of trap /granite /quartzite /gneiss metal for R.C.C.wall of required thickness including steel entering, formwork,

Providing structural steel work in singlest anchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolt setc. as per detailed designs and drawings or as directeding icluding cutting, fabrication, hoisting, erecting fixingin position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections with out connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and erecting chain link fencing 1.6M. height with G.I. chain link of size 50 x 50mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40x40x 6mm size, includind excavating pits for foundation and embeddedin C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angle sattopand bottom of 25x25x5mm size and vertical M.S. flat 35x5mm and 25x5mm horizontal including cross support of 40x40x6mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450x450x670mm including 3 coats of oil painting etc. complete.

Providing and Fixing F.R.P. Delux bench of size 1.50 m (5 Ft) Length of approved quality including all fixtures finishing etc complete.

Glow Garden- To Design & Provide As well as Execute the Glowing Street Park including Base, Inner Structure, Main Stand, Lights, Exterior, Bends, Cutting Elements Arts etc. Complete as directed by Enginner In Charge

Providing uncoursed rubble masonry oftrap/ granite /quartzite /gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls /in plinth of external walls including bailing outwater manually, striking joints on unexposed faces and watering etc.complete.

Providing and laying Cast in situ/ Ready Mixc ement concrete M15 of trap /granite /quartzite /gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finishis to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall b ecovered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)

Providing expansion joints in R.C.C. framed structure (atfloorlevel) with premoulded filler 25 mm thick and 3mm thick aluminium plate as required, bitumen poured filler and fixing T.W. battens on rear faces etc. complete as directed.

Providing and laying in position flooring of telephone black/ AmbaWhite /Catbary brown /Rubyred /Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing and laying ceramic tiles having size 30cm. x 45cm. confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar in cluding joint filling with white / colour cement slurry cleaning curing etc. complete.

Providing and fixing solid core flush door shutterin double leaf 32 mm, thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc.

Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge.

Providing and fixing white glazed earthen warelipped flatback /corner type Urinal with PVC 5liters flushing cistern with fittings, inlet pipe with stoptap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trapand soil pipe connection up to the outside face of wall.

Providing and fixing 50 mm diameter water meter with non-return valve including strainer, sockets /union nutand including water meter box making lockin garrangement and lock. [without chamber]

Providing, constructing and fixing 600 mm dia. Inspection chamber made up of Poly propylene /polyethylen ematerial Having 315 mm diameter inlet (s)/ outlets and with eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of 5 mm and 600 mm in height, within builts haftachievetheinvert depth as per site condition of wall thickness of 5mm having R.C.C. cover and frame fixingin 150 mm thick in c.c. 1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete.

Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 20mm thick and required width wide in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer

Providing & Fixing FRP Entrance Gate 5.6 mt Length and 2.5 mt height (Quation) As derected by Enginner -in- Charge.

Providing and fixing Gazeboo FRP claddig on Columns of size 3 mt *1.5 mt (Quation) As derected by Enginner -in- Charge.

Providing and fixing FRP Scalpture (Soldier Statue) 1.5 mt Height (Quation) As derected by Enginner -in- Charge

providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

Providing and applying two coats of lead /zinc base oil paint /bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (Including primer coat).

Excavation : Excavation for foundation in soft strata which does not required blasting up to 1.5 Mtr. depth including removing the Excavated material up to a distance of 50 Mts. beyond the building area and lift. (PWD-DSR 2015-2016) P-5 / I-A-1

GARDEN SOIL :- Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size Free from stones rubbish like dried grass roots and other such materials. The soil should be fresh be measured by measuring box (Farma) Item includes royalty charges, octroi, corporation Tax Transporting, loading – unloading etc As derected by Engineer-Incharge.

Farm yard manure :- Supplying on site well decayed, well dried, well powedered, withought clods and free from stones, dried grass and other rubbish material,. The colour of the manure generally be black. the manure will be measuring by measure box. (farma) item includes Transporting, loading -unloading etc (lead charges per 40km. are considered.

Preparing Instant Lawn : Excavating the ground to a required depth of 20cms removing & conveying unwanted stuff to a required distance as directed. filling fresh garden soil / silt & manure in excavated area in 3:1 proportion to a height of 20cms. Mixing garden soil and manure thoroughly will levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering weeding clopping rolling etc. complete

Preparing Shrubbery :- Excavating the round to required depth of 30cms, removing and conveying unwanted stuff to a required excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil & manure toughly well, leveling , watering on previous As derected by Engineer-Incharge.

Supplyings & planting of plants required for landscaping:- Euphorbia, hemelia, Malphejia, Ticoma, song of India, Golden bamboo, Bhudhhaj bamboo, golden ficus, Phonicu palm, x mass trees ficus panda, etc. (height of plant 5-6 ft )

Planting large flowering / shady trees :- Digging pit with size 0.9m x 0.9m x 0.9m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m and remaining height of 0.60m with fresh garden soil & manure in 3:1 proportion Mixing soil & manure thoroughly well. leveling as directed, watering previous night, planting on to two year old healthy trees sapling as per specifications. Maintaining till well established by watering weeding, stirring of soil replacing of casualties etc. complete.

Providing forest trees putranjiva, jaccaranda, bakula, kecia, Neem, shoka Gulmohar 8 feet to 10 feet.

Providing and supplying palm trees vaieties, red palm, fox tail palm, botttol palm, Rhaphis palm, Table palm, Cristle palm, cene palm, Ashoka etc.. Size 10-12 feet

SINGLE SWING WITH BELT ASSEMBLY (Proving and Fixing) Rec. Age :- 4-14 yrs. The area :- 3.0 m x 2.5 m Safe play area :- 4 m x 3.5 m In the swing the leg support is made up of 40 NB GI pipes and toppipe is of 50 NB GI pipes with GI junction box with powder coating.The swing seat is made up of 10 mm thick rubber belt. The belt seat is affixed on 6 mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. All pipes are ‘B’ class pipes All Structures are to be Powder Coated. All Work Done As Per General Raw Material Sheet Added Below. Work done should be as per engineer incharge.

SINGLE FRP ROLLER SLIDE 1.5 MT (Proving and Fixing) Age Group :- 4 – 12 yrs. Product Area :- 5.8 m x 1.0 m Safe Play Area :- 6.8 m x 2.0 m The roller slide is made up of FRP. The slide chute consists of molded plastic rollers spread over the length. The rollers are made up of HDPE with UV stabilized pigment. The square platform of the slide is made up of the Fiberglass reinforced plastic. The vertical platform support pipes used are of 80 NB powder coated GI pipes. The railing is made in rotational molding. The slide entry is affixed on 80 NB and 80 x 20 NB nylon clamp. The ladder frame is made in 20 NB and 25 NB powder coated GI pipes. The triangular steps are made in 16 SWG GI sheets. All pipes are ‘B’ class pipes All Structures are to be Powder Coated. All Work Done As Per General Raw Material Sheet Added Below. Work done should be as per engineer incharge

MULTI SEATER SEE-SAW (Proving and Fixing) Per No As derected by Engineer-Incharge. Age Group :- 3- 10 yrs. Product Area :- 3.0 m x 0.5 m Safe Play Area :- 4.0 m x 1.5 m Material Specification : The Multi Seater See saw comprises four roto seats. The lever consists of 20 NB and 80 NB powder coated GI pipes. The bearing used in this item is heavy duty nylon bush type. The stand for see saw is made using 50 NB GI pipe. All pipes are ‘B’ class pipes The Foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x0.45m and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Work done should be as per engineer incharge\40km. are considered.

Drilling of borewell of 150 mm dia.(GSDAapproved rate)

P.V.C. casing pipe of 150 mm dia GSDA approved rate item NO.

Yield test GSDA approved rate - 2017-18

Providing 32 mm Dia GI Pipes including all taxes ins. Etc. complete

Mazdoor - 1 Labour

Mali - 1 Labour

S & E decorative light pole of height 4 m high with decorative single bracket

SITC of 3.5 mtr long GI pole with double Decorative bracket arm.

SITC of 5 mtr long GI pole with Triple Decorative bracket arm.

SITC of 3.5 mtr Cartoon Character or theme design Pole

SITC of 3 mtr long post top pole

SITC of 3 mtr and PU painted petal pole

Making cement concrete foundation

Providing & erecting 7 m high octagonal pole

Makin cement concrete foundation (for 6m to 8m high octagonal /conical GI pole).

Providing pipe type earthing

S & E Ring for high mast

SITC of LED Flood light 120W.

Supply of decorative luminaire 40W LED.

SITC of decorative luminaire 60/70W LED

S & E mains with 3x2.5 sq.mm wire

Providing PU paint to 7 mtr octagonal pole

Providing PU paint for highmast ring

Supplying and erecting bracket fan

Supplying and erecting Ceiling fan

S & E electronic step regulator for fan,

S & E down rod

S &E 10-12W LED Lamp

S & E fresh air cum exhaust fan

S & E 1.5HP Centrifugal water pump

S & E Retrofit T8 LED 18 / 20 tube light

S & E LED 18 W down lighter/ Panel Light

Providng earthing

S & E GI strip for earthing

S & E iron work, sheet metal work

SITC of street Light control panel

Point wiring for independent plug

Point wiring for light/bell/exhaust fan

Point wiring for light/bell concealed type

Point wiring for independent plug, concealed type

S & E mains with 3x4 sq.mm wire

S & E cable 4 core 10 sq. mm. conductor

S & E cable 4 core 25 sq. mm. conductor

S & E cable 4 core 50 sq. Mm conductor

Supplying and laying pipes (DWC)

Providing concrete for resurfacing the road.

S & E SPMCB 0.5A to 5A,

S & E LED flood light,fitting Max. 20W

S& E 36W Mono colour Façade lighting

SITC of LED strip of 3000K 24W/mtr w

S & E of aluminium profile housing for LED strip

SITC of one colored/ two colored/ three colored LED Strip 3 of 5W/mtr

SITC of High quality LED Linear profile light

SITC of spot/wash light,Power : 50W

SITC of multicolor spot light, Power :20W

SITC of Power Driver POWER: 200W

SITC of DmX Controller

SITC OF Motif (like Peacock/Dry Fountain)

SITC of Garden speaker power handling: 30w

Supply Erection of bracket for garden speaker

SITC of 1500 watts PA Amplifier.

S & EJunction box for speaker

S & E Loud Speaker cable 4 x2.5 sqmm copper

Supplying and erecting professional CD player

S & E SS Rack Enclousure for music System

Providng earthing with galvanized iron earth plate

S & E ISI mark GI pipe 50 mm dia.‘B’ class

Second Year Comprehensive Maintenance of all electrical works (5% of Estimate Cost)

Third Year Comprehensive Maintenance of all electrical works (10% rise on Second Year Maintenance Cost)

Forth Year Comprehensive Maintenance of all electrical works (10% rise on Third Year Maintenance Cost)

Fifth Year Comprehensive Maintenance of all electrical works (10% rise on Forth Year Maintenance Cost)

N A CONSTRUCTION PVT. LTD.