Vertical Extension of Korwa Transit Camp For two additional room with attached toilet at Lucknow.

Hindustan Aeronautics Limited

(Avionics Division, Korwa)

DEPARTMENT OF CIVIL ENGINEERING

CHECK LIST FOR SUBMITTING E-TENDER

NAME OF WORK:- Vertical Extension of Korwa Transit Camp For two additional room with attached toilet at Lucknow.

NIT No.- HAL/KWD/Civil/33 of 25-26 Date: 25.02.2026

Name of Contractor:

S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below

1 ANNUAL TURN OVER: -Average Annual Turnover during the last 3 years, ending 31st March-2025 of previous financial year, should be at least 30% of the approximate estimated amount put to tender. The Bidder should upload profit & loss statement for the last three years duly certified by Chartered accountant with UDIN. (Supported with Income Tax return, Balance Sheet etc.).

2 EMD (As per NIT)

3 SOLVENCY CERTIFICATE- Solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.

4 EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.

5 Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR

i) Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR

ii) One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.

6 Registration certificate with Government department and Government undertaking, if any.

7 Proof of GST registration

8 Copy of PAN/ GIR No. Registration Certificate issued by Income Tax Authority.

9 Constitution and legal status.( Partnership/ Proprietary)

10 Details of Bank name , brance code, address, IFS code and Account number on letter head.Please attach scanned copy of blank cheque for reference.

11 The rate quoted shall be inclusive of all taxes. Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated.

12 Tenderers are required to attach Format of undertaking as per Annexure I & J

13 Signature done, wherever required.

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

Time Required for

(a) Conclusion of contract- 03month

(b) Completion of works- 12 Months

Sl. No. Particulars Amount In Rs. Reference

1 Term contract for civil maintenance works in township for repair & maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc and allied civil works required for completion of work.

a Civil Works #REF! [Annexure- D-1]

2 Add 5% towards contigencies #REF!

Grand Total #REF!

Say ` 14.07 Lakhs

Sr. Manager (Works ) ATA

(Satyendra K Maurya) (SK Chaudhury)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

1 SCHEDULE - "A" (PART-A) #REF!

2 SCHEDULE - "A" (PART-B) #REF!

Contingency @ 5% #REF!

Grand total #REF!

SAY : 14.07 Lakhs

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Name of Work:- Vertical Extension of Korwa Transit Camp For two additional room with attached toilet at Lucknow.

NIT No.- HAL/KWD/Civil/33 of 25-26

Note:- Tenderers are requested to quote their offer in percentage either above or below on CPWD DSR-2023 Volume I & II (Rates). All relevant items shall be executed as per CPWD specifications and CPWD DSR 2023, materials specifications shall be as mentioned in the Bill of quantities and as per the List of approved make/brand as provided in tender document and as per the direction of Engineer-in-charge.

NAME OF AGENCY (To be filled in highlighted box ) :

Sl. No. Description of item Qty. Unit Rate derived excluding GST @18% Amount excluding GST @18% in (Rs.)

PART-A- Civil works

1 Dismantling of Brick Works of any description and in any position including disposal of material within 50 metres lead at directed place, including cost of transportation, cleaning the surrounding area, labour, T&P etc all complete as per direction of Engineer - in - charge. 4.00 Cum 1747.36 6989.44

2 Demolishing cement concrete of any description and in any position by manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2.00 Cum 2064.61 4129.22

3 Providing mixing and placing Plain Cement Concrete : 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, manholes, road, chambers, duct etc with mechanical mixing including form work, side shuttering, compaction, curing including , materials, labour, T&P etc, required for proper completion of the work as per specification and direction of E.I.C 1.00 Cum 5777.61 5777.61

4 Providing & laying Reinforced Cement Concrete 1:1.5:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in beams, suspended floors, roofs, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level at any floor etc. including cost of all labour, material, T&P, mechanical mixture, platform, placing of concrete in position at any floor without disturbing reinforcement required and preparation of cement concrete by mechanical mixing in the form of volumetic mixing, curing and proper compaction by mechanical vibrators as required and also as per drawing, specification and direction of EIC. 22.00 Cum 9758.40 214684.80

5 Providing, fixing and laying TMT reinforcement bars conforming to IS-1786-1985, for any diameter of TISCON / SAIL/ RINL/Gallant or any other approved make for all type of R.C.C works including straighting, cut to length, bend to shape required, cranking, bending spirally or hooping, spacers / chairs, wastages and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it (RCC) also including cost of all labour, material, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C 3190.00 kg 91.47 291789.30

6 Providing, fabricating, fixing and removing, Form work / shuttering of side of concrete foundation footings, base of coloum and raft beams, Suspended floors, roofs, landings, balconies and access platform, Lintels, beams, plinth beams, girders, bressumers and cantilevers and similar all type of RCC work or any description of works, in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, including working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period as described in IS:456 -2000 , etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 158.00 sqm 639.74 101078.92

7 Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand (zone-Ill) derived from natural sources) in superstructure above plinth level or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 38.00 Cum 7723.22 293482.36

8 Providing and laying Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand (zone-Ill) derived from natural sources) in superstructure above plinth level including necessary cutting of bricks as required , wastages,straight or curved, work up to floor V level including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 16.00 Sqm 953.15 15250.40

9 Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand (zone-Ill) derived from natural sources) on walls, ceiling etc of rough / fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 370.00 Sqm 335.32 124068.40

10 Providing & fixing power coating Aluminium anodized sliding window partially fixed and partially sliding of anodized Aluminium section in window shutter, Three track Al. window with following specification for each window:- i) Outer Al. frame 100x44x2mm section, ii) Three track Al. channel 100x25mmx1.5mm approx, iii) Window Shutter of 12x25 mm appx. Size, for one leaf reflective glass sliding shutter other outer leaf mosquito SS mesh sliding shutter using bearing, handle, intermediate locking sections/channels with T-rubber beading and U-rubber gasket, screw aluminium angle section for fixure etc. clutch type handle (heavy duty) in each shutters, 4.8 mm thick Reflective tinted glass in different colour of make Saint gobain / Modiguard/Triveni / TATA or as approved by EIC, including Stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed on Alluminium framed shutter tolerance as per manufacturer / IS specifications and member will be fitted as per drawing c/c horizontally and vertically both ways complete in all respects including material, labour, T&P, wastage and other required fixtures etc. for proper completion as per specification and direction of EIC. 12.00 Sqm 6862.00 82344.00

11 Providing and fixing galvanised Aluminium grills of 3" size hole of section 6mm size with the help of aluminium Y bracket fixed on aluminium window member with the help of screws etc including material, labour, T&P, wastage and other required fixtures, scaffolding etc. for proper completion as per specification and direction of E.I.C. 12.00 Sqm 2782.00 33384.00

12 Providing & laying integral cement based water proofing treatment "Brick coba" including preparation of surface, cleaning of surface as required for treatment of roof, balconies, terraces, etc as per following specification with labour, material, T&P, lead & lifts etc all complete as per direction of EIC. 63.00 Sqm 1428.80 90014.40

(i)Applying and grouting a slurry coat of neat cement using 2.75Kg/Sqm of cement admixed with required water proofing liquid of approved make such as pidilite, Dr. fixit etc. or as approved by EIC confirming to IS 2645:1975 or relevant IS codes, Qty. as per manufacturer specification over the existing roof including cleaning the surface before treatment. 0.00

(ii)Laying cement concrete using broken brick/bricks bats 25mm to100mm size with 50% of c.m.1:5 (1 Cement, 5 Coarse Sand) admixed with required water proofing liquid of approved make such as pidilite, Dr. fixit etc. or as approved by EIC conforming to IS 2645:1975 or relevant IS codes, qty as per manufacturer specification over 20 mm thick layer of cement mortar of mix 1:5 (1cement, 5coarse sand) and mixed with required water proofing liquid of approved make such as pidilite, Dr. fixit etc. or as approved by EIC conforming to IS 2645:1975 or relevant IS codes as per manufacturer specification to required slope and treating similarly the adjoining wall up to 300 mm height including rounding of junction of wall & slab. 0.00

(iii)After two days of proper curing applying a second coat of cement slurry @ 2.75 kg/sqm of cement admixed with required water proofing liquid of approved make such as pidilite, Dr. fixit etc. or as approved by EIC conforming to IS 2645:1975 or relevant IS codes as per manufacturer specification. 0.00

(iv)Finishing the surface with 20mm thick joint less plaster with cement mortar of mix 1:4 (1 Cement, 4 Coarse Sand) admixed with required water proofing liquid of approved make such as pidilite, Dr. fixit etc. or as approved by EIC confirming to IS 2645:1975 or relevant IS codes, Qty as per manufacturer specification and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. 0.00

(v)The whole terrace so finished shall be flooded with water for minimum period of two weeks for curing and final test of all operation to be done in order as directed. 0.00

(vi)The thickness of treatment shall be 125 mm maximum & minimum thickness at khurras 65 mm (All above will be treated as single item including labour, material, T&P etc all complete as per direction of EIC. Note: Qty. of liquid water proof compound shall be mixed per bag of cement as per manufacture specification. 0.00

13 Providing and fixing to door frame (MS/ Wooden) flush door shutter 30 mm thick (Single / double leaf) phenol formaldehyde bonded, core of block board construction with frame of hard wood all round lipping, commerical ply on both faces of shutters of Gee doors/Kit ply/ Swastik/ Green Ply or other approved make, ISI mark as approved all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including 4 nos for each leaf Stainless Steel butt hinges with necessary screws labour, material, T&P, cartage, wastage etc all complete as per specification and direction of EIC. 4.00 Sqm 2686.90 10747.60

14 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm(± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-incharge 3.00 Sqm 2759.71 8279.13

15 Providing & laying Glazed Vitrified tiles Mat/ Antiskid finish of size 600 x 600 mm or more on floor of approved shade & brand like Kajaria/ Johnson/ Somany or as approved, grouting of tiles with neat cement slurry @ 3.30 kg/Sqm and joints finished with matching colour pigment and epoxy solution including cleaning of existing surface with acid after roughening of surface/hacking of surface with suitable tools also providing bedding layer 20 mm (Av. thickness) in c.m. 1:4 (1cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 92.00 Sqm 1242.41 114301.72

16 Providing & laying glazed antiskid ceramic tiles of size 300 x 300 / 400x400mm with first quality of Kajaria/Somany or equivalent approved make, shade design in floor over 20 mm thick bed mortar in C.M.1:4 (1 cement, 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm and grouting the joints with epoxy grout with matching shade and sealed finally with transparent epoxy coating, to avoid dirt on joints, including the cost of material, labour, T&P all complete as per specification and direction of E.I.C. 8.00 Sqm 930.04 7440.32

17 Providing & laying glazed ceramic tiles of size 300x450/ 300x600 mm or larger size with 1st quality of Kajaria/Somany or equivalent approved make including provision of pencil tiles / decorative bands / border in wall tiles , skirting and dado in bedding layer 15mm av. Thickness in CM 1:3 (1cement, 3coarse sand) jointing with grey cement slurry @ 3.3kg per sqm, and grouting the joints with epoxy grout with matching shade and sealed finally with transparent epoxy coating, to avoid dirt on joints, including the cost of material, labour, T&P, curing, scaffolding all complete as per specification and direction of E.I.C. 40.00 Sqm 1075.41 43016.40

18 Providing & applying approx. 1 mm thick wall care putty of make birla, berger , ACC or approved make with a coat of wall primer of approved brand to give a smooth & even finish at all floors on walls / ceilings or any description of works including preparation of surface smooth & even, filling holes / minor pits all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C 320.00 Sqm 132.35 42352.00

19 Providing & applying two coats applied @ 1.67 ltr/ 10 sqm of weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC. 600.00 Sqm 102.41 61446.00

20 Providing and applying two coats of acrylic distemper (ready mixed) having VOC content less than 50 gram/litre of approved brand and shade such as Asian/Berger etc. on wall / ceiling surface including preparation, removing of nails, filling holes / minor pits , cracks with Birala putty wherever required etc., spreading & removing covering to doors, windows, floors, fittings etc. to protect them from splashes, removing & replacing furniture, movable cupboards, blinds etc., washing floors, cleaning glass, joinery etc. of drops and splashes & leaving premises clean and tidy with all labour, material, wastage, scaffolding with all protective measures, T&P, cartage etc all complete as per specification and direction of EIC. 300.00 Sqm 53.18 15954.00

21 Providing & applying two coats of super synthetic enamel painting on wood / steel / wall surface over a coat of wood/ steel/ wall primer for any description of works of approved shade, make Asian / Berger / ICI of fisrt quality including preparation of surface with Putty filling in cracks, holes etc wherever required, at any height / depth or any descripiton of works at all floors including all labour, material, T&P ,scaffolding all complete as per specification and direction of E.I.C. 50.00 Sqm 87.19 4359.50

22 Supplying and fixing powder coated Aluminium fittings with necessary fixtures all complete. 0.00 0.00

22(a) Providing and fixing Tower bolt anodised Aluminium 200mm long of apporved make such as classic, shivalik, diamond or any other approved make as per specification and direction of EIC. 4.00 Nos. 84.56 338.24

22(b) Providing and fixing anodised aluminium sliding door bolt 250x16 mm of apporved make such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 6.00 Nos. 221.03 1326.18

22(c) Providing & fixing anodized Aluminium handle 125 mm grip length of apporved make with necessary screws, such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 8.00 Nos. 56.19 449.52

22(d) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. including labour, material, T&P, etc all complete as per specification and direction of EIC. 4.00 Nos. 103.18 412.72

22(e) Providing and fixing ISI marked aluminium butt hinges of size 125x75x4 mm anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. including labour, material, T&P, etc all complete as per specification and direction of EIC. 16.00 Nos. 127.31 2036.96

22(f) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. including labour, material, T&P, etc all complete as per specification and direction of EIC. 6.00 Nos. 833.86 5003.16

23 Providing and fixing stainless steel railing ( Grade 304) made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making bend/ curvature as per drawing and staircase profile. (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 70.00 Kg 655.11 45857.70

24 Providing & laying mat finished heavy duty Vitrified tiles of size 600 x 600 mm thickness 15mm of 1st quality on pavement of approved shade & brand like Kajaria/ Johnson/ Somany or as approved, grouting of tiles with neat cement slurry @ 3.30 kg/Sqm and joints finished with matching colour pigment and epoxy solution including cleaning of existing surface with acid after roughening of surface/hacking of surface with suitable tools also providing bedding layer 20 mm (Av. thickness) in c.m. 1:4 (1cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 93.00 Sqm 1969.00 183117.00

25 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and -shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 60.00 Sqm 1570.82 94249.20

26 Providing , fabricating and fixing M.S. frames for doors, windows and ventilators, MS grill, grating, railing made out from MS square sections, M.S. angles and M.S. flats as per design, electrically welded and fixed in chowkhats with screws or treads of steps and R.C.C. balcony slabs in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 hard stone aggregate 12.5 mm nominal size) including labour, material & T&P grinding etc. all complete, as per drawing, specification and direction of EIC. 100.00 Kg 110.68 11068.00

27 Providing , fabricating and fixing Steel work in built up hot finished wlded type tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers, MS plates, MS angles, MS flat etc., labour, material, T&P, cartage and grinding etc. all complete, as per drawing, specification and direction of EIC. 615.00 Kg 164.88 101401.20

28 Providing & fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steet 0.50mm thick in horizontal/ vertical in roof covering/ cladding to wall, fixed with self drilling and self tapping screws as specified by manufacturar of any approved colour and quality of make National/TATA/ Bhushan/Jindal or as approved by EIC. The minimum end lap of sheet should not be less than 150 mm or as per manufacturer instructions and the minimum side lap of sheet should be as per manufacturer instructions or direction of EIC .The sheet shall be supplied as per site requirement to suit site dimensions. including cutting, wastage , all necessary L or J hooks where required, bitumenous cup and washer etc. with all labour , material, T&P, cartage, safety arrangements etc. all complete as per specification and direction of EIC. 50.00 Sqm 626.49 31324.50

29 Providing and fixing 18 mm thick Granite stone slab of colour black, Cherry/ Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, Staircase case steps & landing, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. including all labour, material, wastage T&P etc all complete as per specification and direction of EIC. 3.00 Sqm 4356.36 13069.08

Sanitary items 0.00 0.00

30 Providing & fixing 100/ 110 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to wall/ laid in trenches including necessary required fittings such as reducer , collars, MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 30.00 RM 320.09 9602.70

31 Providing & fixing 100/ 110 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 4.00 Nos. 127.52 510.08

32 Providing and fixing CPVC (Chlorinated Polyvinyl Chloride) concealed pipe 20mm having thermal stability for hot & cold water supply, including fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand , cost of cutting chases and making good the same, testing of joints , labours, materials , wastages etc., all complete as per direction of Engineer in Charge. as directed by EIC. 40.00 RM 455.97 18238.80

33 Providing and fixing CPVC (Chlorinated Polyvinyl Chloride) concealed pipe 25mm having thermal stability for hot & cold water supply, including fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand , cost of cutting chases and making good the same, testing of joints , labours, materials , wastages etc., all complete as per direction of Engineer in Charge. as directed by EIC. 60.00 RM 532.00 31920.00

34 Providing & fixing 75 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required fittings such as reducer , collars, MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 20.00 RM 211.02 4220.40

35 Providing & fixing 75 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 4.00 Nos 89.82 359.28

36 Providing & fixing of 75mm dia PVC (SWR) slotted vent cowels of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing with pipe, all labour, materials, cartage, tool & plants, etc. all complete as per specification and direction of EIC. 4.00 Nos 182.35 729.40

37 Providing & fixing of PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia including all labour, materials, tool & plants, etc. all complete as per specification and direction of EIC. 2.00 Nos 209.00 418.00

38 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors. including all labour, materials, tool & plants etc. all complete as per direction of EIC. 2.00 Nos 5526.17 11052.34

39 Providing & fixing vitreous china white wash basin flat back 550x 400 mm size of approved make such as Hindware, Cera, Nycer, Perryware including 15 mm C.P. brass pillar tap (L&K, Prayag, Hindware, Parryware, Plumber or as approved by EIC) with 450mm long PVC Connection of Prayag make or equivalent approved make CP waste coupling 32mm dia of L& K, Plumber make, CP bottle trap with coupler 32mmx25mm, MS / CI bracket for fixing of wash basin painted with white paint all complete including cutting and making goods, fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates) and finishing with cement mortar 1:3, the walls and floor with all labour, material, T&P, wastage etc all complete as per specification and direction of EIC. 2.00 Nos 1593.85 3187.70

40 Providing and fixing 600 x 450 mm x 5.00 mm bevelled edge mirror with the holes on all the four corners of the glass of Modiguard/Saint Gobain/Atul or as approved by EIC, complete fixed with SS spacers or 6 mm thick asbestos sheet/ commercial hard board as required, fixed to wooden / PVC cleats with C.P. brass screws and washers all complete with labour, material, T&P etc and as per specification and direction of EIC. 2.00 Nos 1363.78 2727.56

41 Supplying and fixing to wall C.P. Soap tray of approved sample and quality, size, make Plumber, L&K, essess, Jaquar, Marc etc. or any other approved make including labour, T&P, material etc. complete as per specification & direction of E.I.C. 2.00 Nos 109.00 218.00

42 Providing and fixing 25mm PTMT ball valve with polythene floats of approved quality, High or low pressure, including adhesive for jointing with pipe, soota, safeda, labour, material, T&P etc all complete as per specification & direction of EIC. 2.00 Nos 214.58 429.16

43 Providing & fixing CP brass fittings of Prayag / L&K / Hindware / Parryware / Plumber or as approved by EIC including labour, material, T&P, soota, safeda etc including removal of existing bathroom fittings if requred all complete as per specification & direction of E.I.C. 0.00

(a) C.P. brass long body bib cock of approved quality conforming to IS standards 2.00 Nos 677.63 1355.26

(b) Concealed stop cock 15 mm dia 2.00 Nos 568.64 1137.28

(c) CP angle valve 15 mm dia 2.00 Nos 487.09 974.18

(d) Health fauset 2.00 Nos 979.00 1958.00

44 Providing and fixing Chromium plated Grating Jali 100 / 125 mm dia with waste hole of appoved make all complete with labour, material, T&P, cartage etc and as per specification and direction of EIC. 3.00 Nos 63.00 189.00

45 Providing and fixing C.P. brass shower rose 150 mm dia with swivel arm of make - L&K/ Plumber/ prayag/ Pearl or as approved by EIC, including all required accessories etc, complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 2.00 Nos 188.59 377.18

46 Providing and fixing Chromium plated Towel rod 600 mm length of approved make or as approved by EIC, including all required accessories etc, complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 2.00 Nos 601.30 1202.60

47 Providing and fixing in position Tripple layer PVC water tank of 500 Liter Capacity with cover of make Polyplast / Sintex / Supreme or as approved by EIC with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes including tank connector, PTMT ball cock 20mm of Prayag or equivalent make with epoxy coated aluminium rod & high density plastic ball fixed with CPVC / GI pipe including hoisted and fixed in position on roof, labour, material, cartage, fixing charges, T&P, wastage etc all complete as per specification and direction of EIC. 2.00 Nos 4664.83 9329.66

48 Providing and fixing 600x120x5 mm CP glass shelf of make - L&K/ Plumber/ prayag/ Pearl or as approved by EIC, including all required accessories, C.P. brass brackets, 40 mm long screws, rawl plugs etc, complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 2.00 Nos 918.97 1837.94

49 Providing and fixing CP Towel ring minimum 200mm dia of approved make - L&K/ Plumber/ prayag/ Pearl or as approved by EIC, including all required accessories etc, complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 2.00 Nos 196.73 393.46

50 Making Ferrule connection 20 mm dia with brass ferrule (or connecting screws) , PVC saddle of approved brand like Supreme/Kisan, clamps with CI/PVC mains of any dia pipes including making holes in CI/PVC lines for water connection 20 mm dia with labour, material, T&P with necessary excavation, making holes, returning, filling,etc. all complete as per specification and direction of EIC. 2.00 Nos 322.30 644.60

51 Cutting hole into existing manholes built in brick wall / stone wall for connecting new drains, making good to pipe and rendering, cutting out existing benching for forming branch channel ( ½ round or 3/4 section ) in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4- 20mm graded stone aggregate) smooth finished and reforming benching as required including all labour, material, cutting, fixing, T&P etc. all complete as per specification and direction of EIC. 2.00 Nos 687.38 1374.76

PART-B Electrical works 0.00

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Make-Havells/ Anchor/ National/ Polycab/ Gloster/Finolex/ Kei/ RR Kabel/ Cap cab, with modular switch make- Havells/L&T/Legrand/GM/ABB, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required complete in all respect as per EIC.(Note: (i). Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green. (ii). Switch colour White/Cream or as directed by EIC). 15.00 Nos. 1722.82 25842.30

2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required or as directed by EIC. 5.00 Nos. 1722.82 8614.10

3 Supplying and fixing following modular 3 pin 5/6 A socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5.00 Nos. 111.52 557.60

4 Supplying and fixing following modular 5/6 A switch outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5.00 Nos. 99.22 496.10

5 Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of 18-22 watt 4 feet body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 15.00 Nos. 558.42 8376.30

6 Wiring for circuit/ submain wiring along with earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 120.00 Mtrs. 339.48 40737.60

7 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required 6.00 Nos. 540.38 3242.28

8 Wiring for circuit/ submain wiring along with earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 50.00 Mtrs. 339.48 16974.00

9 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,(02 each) connections etc. as required. 2.00 Nos. 893.80 1787.60

10 Wiring for circuit/ submain wiring along with earth wire with the 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 80.00 Mtrs. 303.40 24272.00

11 Supplying and fixing following modular 5/6 A switch outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 4.00 Nos. 99.22 396.88

12 Supplying and fixing following modular 3 pin 5/6 A socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 4.00 Nos. 111.52 446.08

13 Wiring for circuit/ submain wiring along with earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 40.00 Mtrs. 390.32 15612.80

14 Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 2.00 Nos. 1480.92 2961.84

15 Supplying and fixing of 8 way (4 + 24), Double doorsurface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 1.00 No. 8793.68 8793.68

16 Providing and fixing100 A, 16 KA,TPMCCB rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 1.00 No. 3282.46 3282.46

17 Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Triple pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. 5.00 Nos. 877.40 4387.00

18 Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. 8.00 Nos. 233.70 1869.60

19 Supplying and fixing 10 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. 1.00 No. 233.70 233.70

20 Supply of Plastic material ventilation fan/ Exhaust fan with dust protection shutter of 250 mm size with copper winding, Crompton/Surya/Havells/Philips/Bajaj/ Usha, make, in all respect as per EIC. 2.00 Nos. 1393.18 2786.36

21 Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required Upto 450 mm sweep. 2.00 Nos. 455.92 911.84

22 Supply, Installation, Testing and Commissioning of 1200 mm sweep ceiling fan, BEE 5 star rating, with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cableand earthing etc. as required. Make: Usha/ Orient/ Bajaj/ Havells/ Crompton/ Atomberg, complete in all respect as per EIC. 5.00 Nos. 2363.24 11816.20

23 Supply and Installation of 5 star wall Mount Type ISI Marked to IS 1391 Split Air Conditioner of Capacity between 1.3 Ton -1.7 Ton. Make: Samsung/ Godrej/ Hitachi/ Lloyd/ Panasonic/ Carrier/ Haier/ Daikin/ Bluestar, complete in all respect as per EIC. 2.00 Nos. 29930.00 59860.00

24 Supply and installation of 5 star Water Heater Gyeser ISI Marked of capacity 25 Liter. Make: Crompton/ Voltas/ Hindware/ Bajaj/ Kenstar/ Havells/ Haier, complete in all respect as per EIC. 2.00 Nos. 5243.90 10487.80

Total (Part A + Part B) 2419676.44

Contractor shall quote only numerical value of percentage either Above or Below in highlighted Cell on Total Above % 0.00

Sub Total 2419676.44

Add BOCW @ 1% on sub total 24196.76

Add GST @18% on sub total 435541.76

Total Quoted value including GST @18% 2879415.00

Annexure-D (Para 4.6.4)

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2023-24. (For One years)

Time Required for

(a) Conclusion of Contract - 03 months

(b) Completion of works- 12 months

Sl. No. Particulars Amount in Rs. Reference

1 Term contract for civil maintennace works in Township for repair and maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc. and allied civil works required for completion of work.

(a) Civil Works (Paer: A+Part: B) #REF! [Annexure-D-1]

Grand Total #REF!

Say Rs. #REF! Lakhs

Manager (Works) ATA

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 166.94 3.3388 167 3.34 150 3.00 208.675 125.205 4.1735

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 176.69 14.1352 198 15.84 190 15.20 220.8625 132.5175 17.669

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 166.94 1.6694 181 1.81 160 1.60 208.675 125.205 2.08675

Rebate offered (in %age) if any 2.00

Status of Parties L-2 L-1 9.380172329

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

SCHEDULE - 'A' Part 'B'

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil/21 of 2013-14

PART 'B' NON MES ITEMS

S.N Description of Items Qty. Unit As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (2/2) Freak Rate

Rate in figure ( Rs.) Rate in words ( Rs.) Amount in ( Rs.) Rate (In Rs.) Amount Rate (In Rs.) Amount

1 Supply and stacking of coarse sand such as Banda/ Chopan including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 65.00 Cum 1970.00 #NAME? 128050.00 2600.00 169000.00 2300.00 149500.00 - 2462.50 1477.50 56.62514156 70.76139258 65.34090909

2 Supply and stacking of Ist class bricks class 'A' at directed place inside Factory or Township area including all labour, material, transportation, loading, unloading, wastage , T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 2000.00 Nos 8.00 #NAME? 16000.00 7.50 15000.00 7.00 14000.00 - 10.00 6.00

3 Supply and stacking of 12.5 mm graded stone aggregate of bharatkoop/ Dala quarry including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 10.00 Cum 2408.00 #NAME? 24080.00 2400.00 24000.00 2500.00 25000.00 - 3010.00 1806.00

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 154 3.08 167 3.34 165 3.30 192.5 115.5 3.85

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 163 13.04 198 15.84 200 16.00 203.75 122.25 16.3

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 154 1.54 181 1.81 180 0.00 192.5 115.5 1.925

Rebate offered (in %age) if any 2.00

Total Amount (Part-B) 168130.00 208000.00 188500.00

Total Amount (Part A+Part B) 0.00 1268130.00 1557858.16 1373606.38

Status of Parties L-2 L-1

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya