03/EUDC(RB)/LESA/2025-26

Amount

Safe carriage loading unloading with proper stacking of following material from ESC Daliganj to JE dump store.

11KV 3X70/120 SQ MM XLPE CABLE

11 KV End Termination O/Door & I/Door 3X70/120 SQ MM

LT XLPE Cable 1x630/400/240/3.5x400 sqmm

LT ABC (3x95+1x70+1x16) Sqmm

LT PVC Cable 1x400 Sqmm

11 KV Polymer pin insulator

PCC Pole

ST Pole 11 Mtr

11/0.4 KV 100/250 KVA T/F

Three Phase LT Distribution Box with Clamp

Safe carriage loading unloading with proper stacking of following material from JE dump store to work site.

11KV 3X70/120 SQ MM XLPE CABLE

11 KV End Termination O/Door & I/Door 3X70/120 SQ MM

LT XLPE Cable 1x630/400/240/3.5x400 sqmm

LT ABC (3x95+1x70+1x16) Sqmm

LT PVC Cable 1x400 Sqmm

11 KV Polymer pin insulator

PCC Pole

ST Pole 11 Mtr

11/0.4 KV 100/250 KVA T/F

Three Phase LT Distribution Box with Clamp

Fabrication and etection of S/S type double pole for 11 KV line on 11 Mtr long ST pole structure & installation, Commissining of 100 KVA T/F on double pole including jumpring with the system (All the required material for above job shall be provided by contractor except (T/Fs)

Supply & installation of cable stand for HT/LT cable with all material

Three Phase LT Distribution Box with Clamp

Placement of 11/0.4 KV T/Fs on S/S type installation, commissioning of 100/250 KVA T/Fs jumpering with the system ( All the required matrial for above job shall be provided by contractor except T/Fs)

Hoisting of 11KV XLPE cable3x185 sq mm

High Pressure testing of 11 KV XLPE cable. Testing equipment will be arranged by the contractor.

Construction of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cemend sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr hight & 0.35 mtr wall will be constructed.Rest wall should be 0.23 mtr thick.brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be fiilled from the ground level up to 15 centimeter below from the top of wall,Cement,sand & brick Ballasts should be filled up to 15 centimeter.Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand,cement and stone ballast in the ratio of 1:2:4.The t/fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor .)

Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation,commissioning of 250/400 KVA T/Fs of T/F Plinth and including jumpering with the system ( All the required matrial for above job shall be provided by contractor except T/Fs)

Construction of retaining wall, fabrication & erection of Wire mesh fencing around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm. Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost).

Construction of massonary type Distribution Pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including Straight MS Angle 50X50X6X750 mm- (All the material will be arranged by the contractor).

Suppy & fixing of henless fuse unit 500 amp 650 volts

Suppy & fixing of henless fuse unit 300 amp 650 volts

Suppy & fixing of Copper Busbar LT Fuse unit 750x50x6 mm

Suppy & fixing of Copper Busbar LT Fuse unit 1000x50x6 mm

Suppy & fixing of CU L-Piece for 250 KVA T/f

Suppy & fixing of GI Clamp of different type for PCC/ST pole

Suppy & fixing of MS Channel

Suppy & fixing of MS angle

Concreating of PCC/ST pole

Suppy & fixing of DO fuse set

Suppy & fixing of aluminium crimping lugs 95/120/240/400 Sqmm

Erection of LT ABC (3x95+1x70+1x16 Sqmm)

Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moisture retaining capacity. (Specification of chemical earthing and drawing is hereby enclosed). All material shall by supply by the contractor.

Hoisting, winding and jumpering of of LT cable size 1x630/240/3.5x400 sqmm between LT distribution box/fuse unit & constructed overhead line with proper lugging and clamping

Providing earthing strip size 50x6mm and connecting from earthing pipe/m.s.earting rod to fuse unit/tronsformer body/neutral earthing (Earthing rod & earthing strip arranged by contractor).

Fixing of earth rod (2500x20mm) as per norms, for earthing support of old existing poles of LT lines including 6 SWG GI/Earth wire (All material provided by contractor)

Loading unloading and carriage with proper stacking of 25/63/100 KVA transformer from site/JE dump store to ESC daliganj

Fixingof three phase LT Distribution box ( All material provided by the contractor Except box)

Fixing of earth rod (2500x20mm) as per norms. For earthing support of old existing poles of LT line including 6 SWG GI/Earth wire ( All material provided by the contractor)

All taxess as applicable shall be paid time to time extra

M/S R P ENTERPRISES (BID ID -5213158)

P.S. ENTERPRISES (BID ID -5213313)