SHORT PRESS NIT NO. 1(M-3)ITEM NO.4

S/o Split casing centrifugal pump suitable for clear water having 35 mtrs. Head, discharge 500 mtr3/hr, 1480 rpm. The pump should be fitted with CI casing, CI impeller, CI sleeve, shaft of EN-8 in standard fitting having suction/delivery sizes 250mm x 200mm duly coupled with , 3 pase ,4 pole squirrel cage induction motor of 75KW,415 V,50 Hz , AC Supply ,3 phase, 1480 rpm,415volts, AC supply, , syn. Speed with F class insulation, foot mounted, suitable for above pump with standard base frame, coupling guard. Make of Motor: ABB/Kirloskar/CG/DJBApproved Make of Pump: Kirloskar / M&P / Jyoti/DJB Approved

S/o non clog Dewatering submersible pump single stage,centrifugal closed coupled vertical(mono block type) construction with internal sealing through double meachanical seal made of tungsten or silicon carbide incoeporated in separated sealing chambers filled with oil and pump has a Aluminium jacket type body with top discharge and bottom suction with SS impeller and SS shaft ,3 phase, 50 hz 3 Hp rated, solid handling size 8-10mm, 70m3/hr discharge at 21 meter head. Outlet delivery size 50mm.DJB SOR E&M Item Code 2.1.4 Make:BS/SU/Mody/Kirloskar/KSB/DJB Approved

Supply of 3 phase DOL panel suitable for 3 HP submersible motor with minimum 16 A rated contactor, Relay Range 6-9.30 Amp,short circuit protection through MCB ,duly fitted digital/Analogous ammeter and voltmeter,on/Off trip indications made out of powder coated enclosure with PU gasket ensuring excellent finish and reliablity and provision for connectingdryrunpreventor.Make of Starter panel-L&T/BCH/C&S/as per DJB approved

Supply of MS pipe 50 mm dia, welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet. i/c CP, water charges. DSR (E&M) 2018 Item no. 3011.The length may change as per site requirement.

Supply of MS pipe 300 mm dia, welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet. i/c CP, water charges. DSR (E&M) 2018 Item no. 3003.The length may change as per site requirement.

Supply of MS pipe 250 mm dia, welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet. i/c CP, water charges. DSR (E&M) 2018 Item no. 3004.The length may change as per site requirement.

Supply of MS pipe 200 mm dia, welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet. i/c CP, water charges. DSR (E&M) 2018 Item no. 3005. .The length may change as per site requirement.

C.I. double flanged non rising spindle sluice valve P.N 1.0 IS:14 sub, CI body / wedge / bronze ring / S.S 410 shaft construction & S.S. IS : 6603 Gr. 12 CR 12 CISI marked manual operation .Size 300mm. DJB SOR E&M Item Code 4.2.2 Make Kirloskar/IVC/DJB Approved

C.I. double flanged non rising spindle sluice valve P.N 1.0 IS:14 sub, CI body / wedge / bronze ring / S.S 410 shaft construction & S.S. IS : 6603 Gr. 12 CR 12 CISI marked manual operation.Size 250mm. DJB SOR E&M Item Code 4.2.2 Make Kirloskar/IVC/DJB Approved

C.I. double flanged non rising spindle sluice valve P.N 1.0 IS:14 sub, CI body / wedge / bronze ring / S.S 410 shaft construction & S.S. IS : 6603 Gr. 12 CR 12 CISI marked manual operation. Size 200mm.DJB SOR E&M Item Code 4.2.2 Make Kirloskar/IVC/DJB Approved

CI double flanged swing type non return valve as per IS:5312 PN 1.0 CI body door / bronge to rubber ring / SS 410 twin pin. Size 200mm. Make Kirloskar/IVC/DJB Approved DJB SOR E&M Item Code 4.9.8

CI double flanged swing type non return valve as per IS:5312 PN 1.0 CI body door / bronge to rubber ring / SS 410 twin pin. Size 300mm. Make Kirloskar/IVC/DJB Approved DJB SOR E&M Item Code 4.9.10

S/o Heavy Duty 15 mm thickness MS flange dia 250mm

S/o Heavy Duty 15 mm thickness MS flange dia 200mm

S/o Heavy Duty 15mm thickness MS Dead Plate 300mm

S/o Heavy Duty Double flange 90 degree MS Bend 300mm

S/o Heavy Duty Nut Bolts ,washers good qualtity

S/o neoprene rubber insertion jointing sheet 50% neoprene. Make: Jyoti / Worth.DJB SOR E&M Item code 22.6.1

S/o Supply, 1.1 kV grade, XLPE insulated, stranded Aluminum conductor, galvanized steel flat strip / round wire armored, extrudedPVCtypeST2 sheathed, conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) Size 3.5 Core x 185 Sqmm. DJB SOR E&M Item Code 18.5.8. Length may Change as per site requirement. Make :- Havells / Fort Gloster/ Grandley / ICL / CCI/ICC/Universal.

S/o Supply, 1.1 kV grade, XLPE insulated, stranded Aluminum conductor, galvanized steel flat strip / round wire armored, extrudedPVCtypeST2 sheathed, conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) Size 3.5 Core x 150 Sqmm. DJB SOR E&M Item Code 18.5.7. Length may Change as per site requirement. Make :- Havells / Fort Gloster/ Grandley / ICL / CCI/ICC/Universal.

S/O Heavy duty with double contact and strip wound overload coil with cable entry box type SSD SDx and oil tank capacity 80 liters Manually operated oil immersed sheet steel clad floor mounted type auto transformer starter as per IS: 13947(Part 1&4) with 1 No. under voltage release, 3 Nos. magnetic overload release with oil dashpot time lags 1 No. stop leaver, plain entries for PVC cables & auto transformer with 50%, 65% & 80% tapping, 415V, 3 phase, 50Hz without oil filling, Heavy duty with double contact & strip wound overload coil 75 KW. Make: Advance / or any other make approved by DJB.

Supply of Transformer oil for starter Make – HP/Savita / Power

Supply of CO2 Wheeled fire extinguisher ISI marked conforming to IS: 16018. Complete with composite trolley with handle & wheel, operation manual, wheel type release valve, locking arrangement and shut-off valve fitted with delivery house horn, operating temperature:- 300 C to + 550 C of following capacity: 22.5kg Make Life Guard/Omex DJB/SOR/E&M/item Code 24.2.3

Supply of CO2 type fire extinguisher ISI marked conforming to IS: 15683, complete with delivery hose horn, wheel type release valve, locking arrangement, operation manual and bracket, operating temperature:-300 C to +600 C of following capacity4.5 kg : Make: Life Guard/Omex DJB/SOR/E&M/item Code 24.1.3

Supply of Rubber mats for electrical purpose as per IS: 5424 – 1969, black, red, blue plain chequered of following thickness of 25 mm.Make:Jyoti/Worth DJB/SOR/E&M/Item Code 24.4.5

Loading/Unloading packaging forwarding cost

Erection,Installation,testing and Commissioning charges

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. DSR E&M 2018 Item Code 14.01

Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required (excluding reinforcement). DSR E&M 2018 Item Code 14.10

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. DJB E&M SOR item No.35.1.4

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. DJB E&M SOR item No.35.1.11

Super System Engineers