NFC-K/ELE/2022/25

Supply, Installation, testing and commissioning of outdoor type oil filled distribution transformers including supply of all mandatory spares, including first fill of consumables, erection material, documentation, commissioning spares, tools and tackles of following ratings complete with all accessories, as per datasheet, approved drawings,specifications of this tender and other codes and standards attached or referred. This includes transportation, topping up with oil, filtaration by stream line filtering machine provided by contractor for improving the insulation of oil to the required strength and testing of oil with contractor's own test equipment, including all labour and materials required specifications of this tender and directions of Engineer-in-Charge, complete in all respect. Excluding civil foundation 2500 KVA, 11/0.433KV, Z=8%( Tolerance -0% +10%), Dyn-11, ONAN Outdoor Level 2 Energy Efficiency transformer with offcircuit tap changer as per IS1180.

Supply

Installation

Supply, installation, testing and commissioning of 415 V, PCC/PDB/MCC, TPN, indoor metal enclosed switchboards with form 4B construction and following feeders complete with multifunction meters, metering and numerical relays, CTs, PTs, contactors, starters with suitable interlocks etc. Including supply of all commisssioning spares, madatory spares special toolss and tackles & documentation etc as per specifications and drawings

415V, 4000A 65kA for 1sec PCC switch board with following EDO type ACB feeders as per tender specifications(TAG:PCC-ETP-LC(Liquid), i. 4P, 4000A EDO type ACB Incomer with line PT-2Nos ii. 4P, 4000A EDO type ACB Bus Coupler -1 Nos iii. Bus PT 2 Nos iv. 3P+NL, 1250A EDO type ACBs --- 2 Nos v. 3P+NL, 1000A EDO type ACBs --- 4 Nos. vi. 3P+NL, 800A EDO type ACBs --- 10 Nos.

Supply

Installation

415V, 800A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: PDB-ETP-1(Liquid)., i. 4P,800A EDO type ACB Incomer with line PT-2Nos ii. 4P, 800A EDO type ACB Bus coupler -1 Nos iii. Bus PT 2 Nos iv. 3P+NL, 400A MCCB --- 2 Nos v. 3P+NL, 250A MCCB --- 3 Nos. iv. 3P+NL, 200 A MCCB --- 1 Nos. v. 3P+NL, 125 A MCCB --- 5 Nos. vi. 3P+NL, 63 A MCCB --- 4 Nos.

Supply

Installation

415V, 800A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: PDB-ETP-1(Solid)., i. 4P,800A EDO type ACB I/C with line PT-2Nos ii. 4P, 800A EDO type ACB B/C -1 Nos iii. Bus PT 2 Nos iv. 3P+NL, 400A MCCB ---3 Nos v. 3P+NL, 250A MCCB --- 4 Nos. iv. 3P+NL, 200 A MCCB --- 2 Nos. v. 3P+NL, 125 A MCCB ---3 Nos. vi. 3P+NL, 63 A MCCB --- 4 Nos.

Supply

Installation

415V, 800A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: EPDB-ETP-1(Liquid)., i. 4P,800A EDO type ACB I/C with line PT-2Nos ii. 4P, 800A EDO type ACB B/C -1 Nos iii. Bus PT 2 Nos iv. 3P+NL, 400A MCCB ---1 Nos v. 3P+NL, 250A MCCB --- 4 Nos. iv. 3P+NL, 200 A MCCB --- 1 Nos. v. 3P+NL, 125 A MCCB ---6 Nos. vi. 3P+NL, 63 A MCCB --- 4 Nos.

Supply

Installation

415V, 800A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: PDB-ETP-2(Nonactive)., i. 4P,800A EDO type ACB I/C with line PT-2Nos ii. 4P, 800A EDO type ACB B/C -1 Nos iii. Bus PT 2 Nos iv. 3P+NL, 400A MCCB ---2 Nos v. 3P+NL, 250A MCCB --- 5 Nos. iv. 3P+NL, 200 A MCCB --- 3 Nos. v. 3P+NL, 125 A MCCB ---4 Nos. vi. 3P+NL, 63 A MCCB --- 5 Nos.

Supply

Installation

415V, 250A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: PDB-Power outlet), i. 4P,250A MCCB-1Nos ii. 3P+NL, 63 A MCCB ---5 Nos. iii. 3P+NL, 32 A MCCB --- 20 Nos.

Supply

Installation

415V, 400A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: PMCC-Laundry-ETP-1), i. 4P,400A MCCB-1Nos ii. 3P+NL, 250 A MCCB --1 Nos. iii. 3P+NL, 125 A MCCB --- 2 Nos. iv. 3P+NL, 63 A MCCB ---2 Nos. v. 3P+NL, 32 A MCCB ---2 Nos. vi. 30 kW Start Delta starter --2 Nos vii. 18 kW Start Delta starter --2 Nos

Supply

Installation

415V, 200A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: MCC-Agitator-ETP-1(Liquid), i. 4P,200A MCCB-1Nos ii. 3P+NL, 63 A MCCB ---2 Nos. iii. 10 kW Start Delta starter --3 Nos iv. 3 kW DOL starter --5 Nos

Supply

Installation

415V, 200A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: MCC-Agitator-ETP-2(Non active), i. 4P,200A MCCB-1Nos ii. 3P+NL, 63 A MCCB ---2 Nos. iii. 7.5 kW DOL starter --3 Nos iv. 3 kW DOL starter --5 Nos

Supply

Installation

415V, 4000A 65kA for 1sec PCC switch board with following EDO type ACB feeders as per tender specifications(TAG:PCC-ETP-LC(Liquid), i. 4P, 4000A EDO type ACB I/C with line PT-2Nos ii. 4P, 4000A EDO type ACB B/C -1 Nos iii. Bus PT 2 Nos iv. 3P+NL, 1250A EDO type ACBs --- 6 iv. 3P+NL, 800A EDO type ACBs --- 20 Nos.

Supply

Installation

Supply, installation, testing and commissioning of 415 V, PCC/PDB/MCC, TPN, weather proof metal enclosed switchboards with double door construction suitable for outdoor installation with following feeders complete with multifunction meters, metering and numerical relays, CTs, PTs, contactors, starters with suitable interlocks etc. Including supply of all commisssioning spares, madatory spares special toolss and tackles & documentation etc as per specifications and drawings

415V, 125A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: WP-MCC-Collection-ETP-1) i. 4P,125A MCCB-1Nos ii. 3P+NL, 32 A MCCB ---2 Nos. iii. 5 kW DOL starter --10 Nos

Supply

Installation

415V, 125A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: WP-MCC-Recieving-ETP-1) i. 4P,125A MCCB-1Nos ii. 3P+NL, 32 A MCCB ---2 Nos. iii. 3 kW DOL starter --8 Nos

Supply

Installation

415V, 200A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: WP-EMCC-AGP-ETP-1(Liquid)) i. 4P, 200A MCCB-1Nos ii. 3P+NL, 63 A MCCB ---2 Nos. iii. 15 kW Star Delta starter --4 Nos

Supply

Installation

415V, 125A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: WP-MCC-HUT1-ETP-1) i. 4P,125A MCCB-1Nos ii. 3P+NL, 63 A MCCB ---2 Nos. iii. 2 kW DOL starter --3 Nos

Supply

Installation

415V, 63A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: WP-MCC-HUT2&3-ETP-1) i. 4P,63 A MCCB-1Nos ii. 3P+NL,32 A MCCB ---2 Nos. iii. 2 kW DOL starter --3 Nos

Supply

Installation

415V, 125A, 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: WP- MCC-ETP2(Water Transfer), i. 4P,125 A MCCB-1Nos ii. 3P+NL, 63 A MCCB ---2 Nos. iii. 7.5 kW DOL starter --3 Nos

Supply

Installation

415V, 200A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: WP-MCC-AGP-ETP2&Water transfer)) i. 4P, 200 A MCCB-1Nos ii. 3P+NL,63 A MCCB ---2 Nos. iii. 18 kW Star Delta starter -- 4 Nos

Supply

Installation

415V, 63A, 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: WP-MCC-TPI-ETP2)) i. 4P,63 A MCCB-1Nos ii. 3P+NL,32 A MCCB ---2 Nos. iii. 2 kW DOL starter --3 Nos

Supply

Installation

415V, 160A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: WP-MCC-ZF(HUT)), i. 4P, 160 A MCCB-1Nos ii. 3P+NL,63 A MCCB ---2 Nos. iii. 18 kW Star Delta starter -- 3 Nos

Supply

Installation

415V, 63A 50 kA for 1sec switch board with following feeders as per tender specifications(TAG: WP-MCC-HUT1 to 7-M01&02)) i. 4P,63 A MCCB-1Nos ii. 3P+NL,32 A MCCB ---2 Nos. iii. 7.5 kW DOL starter -- 4 Nos

Supply

Installation

Supply, Installation, testing and commissioning of 11 KV, 40 KA, 1 sec rated HV Isolating breaker panel including supply of indoor drawout type metal enclosed switchboards with copper bus bar incorporating vacuum circuit breaker, line PT, complete with CTs ,PTs, multi function meters (MFM), metering & numerical relays and all other accessories like lifting truck, earthing truck etc., all commissioning spares, mandatory spares, special tools and tackles & documentation, as per EIL standard spec 6-51-0001, tender Specification, datasheets, other codes and standards attached or referred, approved drawings and directions of Engineer-in- Charge, including transportation, labour and materials complete in all respects.

Supply

Installation

Supply, installation, testing and commissioning of 11 kV(UE) grade 3Cx 185 sqmm Al. conductor, XLPE insulated and wround wire armoured FRLS cables of following sizes as per data sheet, specifications of this tender and directions of Engineer-in-Charge. including transport, all labour and materials, complete in all respects.

Supply

Installation

Supply and installation of 11 kV(UE) 3C x 185 sqmm heat shrinkalble end joint kits for 3Cx 11 kV(UE) XLPE insulated cable in transformer cable box/panel end etc.with all accessories to complete the job in all resepcts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Supply

Installation

BUSDUCT

Supply, Installation, testing and commissioning of 415V, 4000A, 65kA(1sec), copper conductor, Sandwich type Bus duct complete suitable for both indoor and outdoor with all horizontal and vertical bends, copper flexible etc. as required including transportation breaking of walls and making good of the same etc., (including structural supports), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge, complete in all respects.

Supply

Installation

Switchboard end/Transformer end termination with all accessories such as copper flexible, matching flanges, gaskets, nuts, bolts etc.

Supply

Installation

Supply, installation, testing and commissioning of 1100 V grade, Aluminium Conductor, XLPE insulated and wround wire armoured FRLS cables of following sizes as per data sheet, specifications of this tender and directions of Engineer-in-Charge. including transport, all labour and materials, complete in all respects.

3.5Cx 300sqmm

Supply

Installation

3.5Cx 185 sqmm

Supply

Installation

3.5Cx120sqmm

Supply

Installation

3.5Cx50sqmm

Supply

Installation

4C x 10sqmm

Supply

Installation

Supply, installation, testing and commissioning of 1100 V grade, Copper Conductor, XLPE insulated and wround wire armoured, FRLS cables of following sizes as per data sheets, specifications of this tender and directions of Engineer-in-Charge. including transport, all labour and materials, complete in all respects.

3C x 16 sqmm

Supply

Installation

3C x 10sqmm

Supply

Installation

3Cx 6 sqmm

Supply

Installation

3C x 2.5sqmm

Supply

Installation

Termination of XLPE insulated armoured Aluminium/Copper power cables (up to 1100 V grade) and connection of leads including the supply of single compression cable glands and heavy duty copper lugs, drilling of suitable holes in equipments for fixing purposes, including fixing of cable glands, supply and fixing of PVC shrouds, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number, ferrules etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

3.5Cx 300sqmm

Supply

Installation

3.5Cx185sqmm

Supply

Installation

3.5Cx120sqmm

Supply

Installation

3.5Cx50sqmm

Supply

Installation

3C x 16 sqmm

Supply

Installation

3C x 10sqmm

Supply

Installation

3Cx 6 sqmm

Supply

Installation

3C x 2.5sqmm

Supply

Installation

Supply, Installation, testing and commissioning of 110V DC system including Ni-Cd Battery and Battery Charger (For S/S-03) for switchgear control and protection as per datasheets as follows: i. 110 V,2 x200 Ah (min.), Ni-Cd Battery - 1 set ii. 120 A (min.), battery charger- 1set iii. 80 A (min.), 12 V, cell booster -1 no iv. Accessories for battery set- 1 set v.110 V, 200 A (min.), DCDB with 30 no. of 32A DC MCCB feeders. This includes supply of all special tools and tackles & documentation, supply of two years operation and maintenance spares, filling with electrolyte, grouting, assembly of battery racks, fixing of inter-cell connectors etc., transportation, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge, Complete in all respects.

Supply

Installation

Supply and installation of prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction, ladder type with a rung/perforated type as per std. tender drawing of approved make and cable tray fittings with all type of bends, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

750 mm wide Ladder type cable tray.

Supply

Installation

300 mm wide Ladder type cable tray.

Supply

Installation

Supply, fabrication and installation of 0.91 mm (20 gauge) GI sheet covers for all sizes cable trays, including necessary hardware, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer- in-Charge.

Supply

Installation

Supply installation and testing of Maintenance Free Copper bonded following size Earth rod and nonpolluting chemically inert earth enhancement compound with minimum following qty. The electrodes shall be made of high tensile low carbon steel rod, molecular bonded with 99.9% electrolytic copper with minimum coating thickness of 250 microns suitable for 35kA Irms for 1 sec and as per IEC 62561-2. The work shall be complete with SS clamps, Earth Chamber, removable cover, etc. and as per tender specifications

Earth rod of 6 mtr length having the dia of 25mm with 50 kg nonpolluting chemically inert earth enhancement compound.

Supply

Installation

Earth rod of 3 mtr length having the dia of 25mm with 25 kg nonpolluting chemically inert earth enhancement compound.

Supply

Installation

Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding, providing cold galvanising spray/anti-corrosive paint/bitumen at joints and clamping etc., with all labour and materials as per approved drawings and specifications of this tender and as directed by Engineer-in-Charge.

Supply

Installation

Supply

Installation

Supply

Installation

Supply, fabrication and installation of MS base frames, supports for switchgear, and brackets for miscellaneous electrical equipments, cable and cable tray supports out of rolled MS sections, pipes, plates etc. including shot blasting, welding, bolting, riveting, supply of necessary anchor bolts and grouting etc., supply of paint and applying one coat of anti-rust primer and two finished coats of approved synthetic enamel paint(as per applicable IS for highly corrosive environment) including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Supply

Installation

S.T.ELECTRICALS PVT. LTD.

Bharat Bijlee Limited

ADISHWARAM CORPORATION