PROVN OF TOILET BLOCK FOR TCP AND HUT FOR POND AREA NEAR ACADEMY HOUSE OF NCO ACADEMY UNDER AGE (I) DHANA AT DHANA MIL STN.

Amount

Excavating over areas, n exc 1.5 m deep and getting out in hard /dense soil, complete all as specified and directed.

All as per item No. 1.00 above but exc 1.50m and n exc 3.00 m deep complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Hard/dense soil, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation of poles, laying of cables etc in soft/loose soil complete all as specified and directed.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layer n. exc 25 mm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed.

M & L for 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M & L for 6mm to 8mm,dia TMT bar cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M & L for 5mm and over upto and including 10mm dia TMT bar in stirrups spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface, complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surface complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface complete all as specified and directed.

M & L for RCC M25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for RCC M25 as in chajjas complete all as specified and directed.

M & L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar 1:6, complete all as specified and directed.

Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement), complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces using integral water proofing compound 3% by weight of cement and finishing the surface even and smooth without using extra cement, complete all as directed and directed. Note: - WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified & directed.

M & L for 5mm rendering thick in CM (1:3) on concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed.

M & L for two coats of Oil bound distemper including preparation of newly plastered wall surface over 1.50 mm thick wall care putty etc complete all as specified and directed.

M & L for preparing new plaster surfaces walls including chajjas, facias etc. and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates, aluminium grill including jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron

S & F aluminium anodised powder coated window and ventilator shutters side hung type or sliding type or fixed type with or without sash bars of aluminium section weighing minimum 0.55 kg/mtr including necessary jointing cleats, glazing clips, rubber neoprene packing , anodised aluminium snap beading , screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no ) , hinge type B-21 100mm long (2 nos) suitable handle (2 no) tower bolt (2 nos), complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S & F tinted / coloured floated glass ordinary quality & glazing with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in Each panel 4.8 mm thick complete all as per specified and directed. Make:- Modiguard/ Saintgobin / Hariyana glass

S & F 100 mm butt hinges stainless steel medium weight, complete all as specified and directed.

S & F 125 mm aluminium alloy handles, cast type anodised complete all as specified and directed.

S & F150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F 300 mm aluminium alloy sliding door bolts with hasp and staple bolt type and fixing clips of sheet cast or extruded section and fixing and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

M & L for 100mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate in floor sub base, complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4, type B1, using 12.5mm graded stone aggregate finished fair and even etc complete all as specified and directed.

M & L 25 mm thick cement concrete in flooring type B1, 1:2:4 (20 mm graded aggregate) screed bed below floor tile, complete all as specified and directed.

M & L for non skid colour ceramic tile 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6., complete all as specified and directed.

M & L for Glazed ceramic coloured walls tiles in vertical surfaces 300x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles. complete all as specified and directed.

M & L for vitrified parking tiles size 300mm x 300mm x 12mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S & F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F stop valves for 15 mm bore fancy type chromium plated long shank and cup concealed screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F 15mm bore bib tap, chromium plated fancy type, screwed down, high pressure for iron pipe or for brass ferrule, complete all as specified and directed.

S & F 10 ltr low level PVC value less, syphonic action type flushing cistern, white, with ball value, float and handle including brackets all as specified and directed.

S & F soap dish vitreous china white approximate size 160 x 160 x 90 fixed to plug with chromium plated brass screw complete all as specified and directed.

S & F brass chromium plated tubular towel rail, 20 mm dia., D Type, 45 cm long between flanges, complete all as specified and directed.

S & F for vitreous china wash basin white flat back size 550x400mm including pedestal excluding taps, but including brackets etc complete all as specified and directed.

S & F 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe, complete all as specified and directed.

S & F PVC connection 15 mm size with CP nuts of length 450 mm long., complete all as specified and directed.

S & F 32 mm bore waster coupling of CP (half of full thread) for WHB and urinal, complete all as specified and directed.

M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75mm dia bore pipe, complete all as specified and directed.

S & F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls of 75 mm dia bore pipe, complete all as specified and directed.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110mm dia bore pipe, complete all as specified and directed.

S & F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls of 110 mm dia bore pipe, complete all as specified and directed.

S & F 75mm dia PVC (SWR) bends any radius, complete all as specified and directed.

S & F 110mm dia PVC (SWR) bends any radius, complete all as specified and directed.

S & F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal, complete all as specified and directed.

S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm bore, complete all as specified and directed.

S & F 500 ltr rotational moulded polyethylene water storage tanks white colour triple layer (cylindrical vertical with closed top) hoisted and fixed in position with all as specified in SSR Part I complete all as specified and directed.

S & F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic bal screwed for iron pipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore. complete all as specified and directed.

S & F Chromium plated shower rose 125 mm size with liver arm and swivel joints including fixing to steel pipe or union complete all as specified and directed.

S & F for grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S & F in vitreous China squatting pan, 'Orrissa' pattern, size 580xmmx440mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and directed.

S & F 100mm PVC vent cowl, complete all as specified and directed.

S & F pillar cock, chromium plated, fancy type for iron pipe or for brass ferrule of 15mm bore dia, complete all as specified and directed.

S & F Vitreous China urinal half stall type white (excluding Flushing cistern, flush pipe and waste pipe) including connection to flushing pipe and outgoing pipe complete all as specified and directed.

S & F push valves (urinal) for 15 mm bore fancy type chromium plated long shank and cup concealed screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F 18 to 20mm thick machine cut granite urinal partition of size 0.45 x 1.20 including rounding of edges , embedded in wall complete all as specified and directed.

M & L for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m interval and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed.

M & L for screed bed 15mm thick in cement mortar 1:4 over RCC Roof mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction all as specified. (Note:- water proofing compound shall be measured and paid separately as supply only)

Material & labour for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP membrane HMHDPE 3 Kg plain (thickness 2.1 mm) (total weight of the finished membrane not less than 3.0 kg/ sqm ± 5 % per sqm) confirming to IS 16540: 2017 of following operation complete all as specified and directed:- (a) Applying a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16540: 2017 (b) Applying hot blown grade bitumen 85/25 @ 1.20 Kg/Sqm over primer. (c) Laying of polymeric water proofing membrane of weight not than 3 kg/Sqm (d) Applying a coat of hot blow grade bitumen 85/25 @ 1.20 kg/Sqm over APP membrane. (e) Applying aluminium paint in two coats @ 100gm/sqm in each coat of finished membrane surface complete all as specified and directed.

S & F Pre-cast reinforced cement concrete manhole covers, factory made i.e. 1:2:4 type B-1, (using 20mm graded stone aggregate) and set in cement mortar (1:6), 50mm thick., complete all as specified and directed. Note :- Reinforcement will be measured and paid separately under respective item.

M & L for PCC 1:5:10 type E2 using 40 mm graded stone aggregated as in foundation, complete all as specified and directed.

M & L for random rubble masonry work brought up to course solidly hearted in cm (1:4)., complete all as specified and directed.

M & L for keyed pointing in CM (1:3) to random or polygonal rubble, uncoursed or brought up to courses., complete all as specified and directed.

M & L for PCC (1:3:6) type C1 as in coping using 20mm graded stone aggregate., complete all as specified and directed.

M & L for boulder filling dry, hand packed tightly as in faces of weep holes to retaining wall., complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings etc complete all as specified and directed.

Dismantling cast iron work of any description etc complete all as specified and directed.

M & L for Excavation for post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm for Hard / Dense soil complete all as specified and directed.

M & L for Plain Cement Concrete type C2 1:3:6 (40mm graded aggregate) as in foundation filling or in mass concrete., complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and a directed by Engineer-in-Charge.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and a directed by Engineer-in-Charge.

S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde- E- 250) quality-A, complete all as specified and directed.

S & F rolled mild steel square/rectangular hollow section in main and cross beam, purlins hips and jack rafters where connected to common rafters running rails fixed with angle cleats or other connecting plated, grade Fe 410W (Gde -E-250) Quality A. complete all as specified and directed.

S & F rolled mild steel sections in stairs (framed) including stringers, trades, landing, balusters, hand rails etc. including cleats, brackets, etc. and conforming to Fe 410-W (Gde E250) quality-A, complete all as specified and directed.

S & F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment etc. grade Fe 410W (Gde -E-250) Quality A., complete all as specified and directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

M & L for preparation of old steel surfaces and applying one coats of synthetic enamel paint of any description over 10 cm width and girth complete all as specified and directed.

M & L for precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4 complete all as specified and directed.

INTERNAL ELECTRIFICATION:- M & L for point wiring complete with 1.5 sqmm single core multi stranded copper conductor ISI marked PVC (FR-LSH) insulated unsheathed cable 1100 volts grade drawn through and including PVC non metallic rigid conduit & conduit accessories not less than 20mm dia concealed/open in Wall/ roof/ceiling with PVC sleeve/ dash fasteners/ wooden gutties and cadmium plated screws as per IS including sunk type MS anodised terminal boxes with 3 mm thick PVC laminated sheet concealed in wall including cutting chasing and making good etc including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly for :- (a) One light point controlled by one, one way, SP, 5 Amps switch

(b) One fan point controlled by one, one way, SP, 5 Amps switch

(c) One socket outlet 5 pin, 5 Amps on the same board

(d) One 3/5 pin 5 Amp socket outlet point controlled by one way one switch on independent board.

S & F switch piano type, flush button single pole, one way 5 amps complete all as specified and directed.

S & F socket outlet 5 amps, 5 Pin, flush type complete all as specified and directed.

S & F ceiling rose, 3phase/PVC/Polycarbonate, isolated body, 3 pin surface, white /any shade, three terminals., complete all as specified and directed.

S & F MCB distribution board steel sheet, enclosures power coated fitted with bus bar, neutral link, earth bar din rail conforms IS-8822:96 and EIC 898-96,240 volts double door when SPN 4 way, 200 amps rated bus bar to be used, complete all as specified and directed.

S & F MCB in DB's/ Isolator of the following rating complete all as specified and directed. (a) MCB SPN 40 Amps, curve 'C' breaking capacity 10 kA.

(b) MCB SP 6-32 Amps, curve 'C' breaking capacity 10 kA.

S & F LED tube light fitting (separate box fitting and LED rod) acrylic linear tube (1x 18 watt), 230V for single LED light fitting & rod (1 x 18W LED) bar professional CW 6500 K cover channel in box fitting, bipin holders, LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make:- Bajaj /Havells/ Philips

S & F LED light fitting 1x9W/1X10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed.

M & L for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6.30 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 5 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work, PCC pit with RCC cover, charcoal salt funnel, GI wire up to 7.5 mtrs length complete all as specified and directed.

S & F single phase heavy duty Exhaust Fan of 300 mm Sweep, 1400 RPM with louver Cutting of existing wall for making hole for fixing of 300 mm sweep exhaust fan including PCC / brick work complete all as specified and directed by Engr - in - Charge.

EXTERNAL WATER SUPPLY & ELECTRIC SUPPLY:- Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 25mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches/surfaces/walls complete all as specified and as directed. Make:-Tata/Jindal/Prakash Surya

S & F PPR Gate Valves (Brass Insert) of 25 mm bore complete all as specified and as directed.

M & L for cutting in position / existing GI pipe line 25 mm dia & insertion of new GI Tee of suitable size for making pipe connection complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core., complete all as specified and directed.

m/s mahendra kumar khare contractor