SPECIAL REPAIR TO AIRMEN MESS AND BILLETS IN TECHNICAL AREA, AT AF STATION SRINAGAR

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving's not exc 15 cm thickness (below or above ground level) including surface finishes of any type i.e. tiles, kota stone all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key scrubbing down with water etc all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc 1.5 Sqm each and making good of disturbed surface match the existing surface all as specified and directed

-ditto - but exc 1.5 Sqm but not exc 4 Sqm each

Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm and removing from site

Taking down and refixing same opening shutter exc.1 sqm and not exc 2 sqm each.

Dismantling unframed timber scantlings 40 Sqcm and over in section any position

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided such as in purlins, truss , railing etc all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge

Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc complete.

Dismantling water tanks of capacity exc 500 and n exc 1000 ltr complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in Sub base complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in sub floor to receive any type of glazed ceramic tiles complete all as specified.

Material and labour for 100mm thick Cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as flooring and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in pavement/plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement complete all as specified and as directed.

M&L for 18 - 20 mm thick machine cut kota stone slab flooring laid over and including 20 mm thick cement screed bedding in CM 1:6 l jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floors, including rubbing and polishing (Mirror finish)complete all as specified and directed .

Material and labour grinding and polishing of existing of Kota stone/terrazzo tiles flooring polished up to mirror finish complete all as specified and directed

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation

M&L plain cement concrete cast in situ 1:3:6 type C0 using 12.50 mm graded stone aggregate as in copings ,hold fast, back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work all as specified and directed

Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortar 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting exc 10 cm but not exc 20 cm girth all as specified and directed

M&L for 15 mm thick cement plaster as in cement mortar 1:6 on brick or concrete surface other than fair faces surface even and fair complete all as specified and directed.

M&L for cutting "V" section to cracks in existing roof or terracing/brick wall including cleaning, and grouting with cement sand slurry 1:3 complete all as specified

M&L for 15 mm thick cement plaster externally as in cement mortar 1:4 and mixed with WPC as per manufacturer instructions with cement ) and finished fair and even complete all as specified and directed by Engr in charge. (Note :- WPC shall be measured & paid separately)

M&L for 10 mm thick cement plaster in CM 1:3 on ceiling of concrete surfaces and finished the surface even and smooth complete.

Supply only water proofing compound of approved make

M&L for applying 2 coat of white wash including preparation of new plaster surface on ceiling.

M&L for two coat oil bound distemper over a coat of alkali resistant primer on new plastered surface including preparation of surface all as specified and directed

M&L for two coat oil bound distemper on old surface of wall including complete removal, washing, rubbing down and stopping of existing treatment over a coat of 1 mm thick cement base wall care putty and making the surface even and smooth and filling the uneven and small holes and making the edges of plaster properly by plaster of paris all as specified and directed

Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatment including thin layer of wall care putty and applying two coats of anti fungal exterior emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of anti fungal exterior emulsion paint over a coat of cement primer including thin layer of wall care putty complete all as specified and as directed.

Material and labour for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash lime mixed approved adhesive i.e. DDL as per manufacturer's instructions complete all as specified and directed.

S&F 125 x 60 mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast (40x3mm) etc. complete size /profile of frame as per IS

S&F 105x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast (40x3mm) etc. complete size /profile of frame as per IS

S&F 35 mm thick Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, Complete all as specified and directed by Engineer-in-Charge

Dismantling the existing ceiling board of any description fixed in any position with nails and Supply and fixing in position suspended false ceiling system using E Grid suspended ceiling Grid system of M/S Everest industries Ltd or India Gypsum. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fiber cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the roof with butter fly clips complete all as specified and directed.

S&F 35 mm thick 2nd Class hard wood glazed and skeleton shutters , open rebated and prepared to receive glass, gauze etc (without sash bars ), edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR part-I section 8, clause 8.24 (a)

S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube.fixing as per specification and drawing .

S&F 30mm thick PVC factory made panelled door shutter as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawings.

Supply and fix rolled mild steel framed work such as grills, wind tie, gratings, Angle for ventilators etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.

Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)(A) Area not exceeding 1.00 sqm each

-ditto - but exc 1 Sqm but not exc 2 Sqm each

S&F 100mm size MS butt hinges medium wt cold rolled.

S&F 150mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified.

S&F Aluminium alloy, anodised, sliding door bolt 200mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed staple plate and fixed complete all as specified and directed.

S&F of 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified.

M&L Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over one coat primer.

Material and labour for ceramic (Non skid) tiles area of each tile exc 0.06 sqm but n exc 0.11 sqm x 7-8 mm thick, as in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles bedded over and including 15mm thick pigment to match the colour of screed in cement mortar 1:6 complete all as specified.

M&L Digital glazed Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors in floors and using spacer bars(keeping min 5mm joint between tile)as per manufactures instruction set in cement slurry and pointed with polymer joint filler. The joints of tile will be filled using epoxy/ polymer joint filler including15 mm thick Screed bed or bedding layer of mortar in CM 1:4 including finishing the surfaces even and rough for laying floor finishes complete all as specified and directed

All as per item No 55 above here-in-before but in Skirting including 10 mm thick backing coat cement mortar 1:4.

M&L Coloured Glazed ceramic tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat.

Material and labour for granite (of any type) 20 mm thick machine cut, bedded, jointed in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match including grinding and polishing over and including 20mm thick screed bed or bedding layer in CM(1:6) including demolition of old existing stone any type complete all as specified and as directed.

Supply and fix rotational moulded PVC water storage tank, 500 ltr capacity (cylindrical vertical type three layered with closed top) hosted and fixed in position and including inlet, outlet & washout tank nipple and brass valve, high pressure with polythene float valve of 20 mm . washout holes of approved make hoisted and fixed complete all as specified and as directed.

Supply and fix rotational moulded PVC water storage tank, 1000 ltr capacity (cylindrical vertical type three layered with closed top) hosted and fixed in position and including inlet, outlet & washout tank nipple and brass valve, high pressure with polythene float valve of 20 mm . washout holes of approved make hoisted and fixed complete all as specified and as directed.

S&F in repair Gun metal, globe or gate valves for 15 mm dia bore pipe with iron wheel head, screwed both ends for iron pipe and fixed in repair etc complete.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe all as specified & directed.

S&F sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plug washers and waste pipe including fixing contilever bracket and connecting union to pipe over all size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm

Taking down GI tubing 15mm bore of any description including cleaning for refixing or removal to store.

Taking down GI tubing 20 mm bore of any description including cleaning for refixing or removal to store.

M&L GI tubing 15mm dia medium grade galvanized, with all fittings fixed complete to walls and ceilings or laid in floors.

M&L GI tubing 20 mm dia medium grade galvanized, with all fittings fixed complete to walls and ceilings or laid in floors.

Refixing old GI pipe 15 mm bore & connections in new or old position to walls and ceiling or laid in floor all as specified & directed.

Refixing old GI pipe 20 mm bore & connections in new or old position to walls and ceiling or laid in floor all as specified & directed.

M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC low level 10 litre capacity valveless Syphonic action type white flushing cistern with inlet ball valve float and handle including brackets and necessary fittings etc fixed in repairs complete.

S&F in repair Vitreous China Urinal, Half stall type including all fittings with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed

S&F in repair vitreous china squatting pan "ORISSA PATTERN" size 580x440mm white with integral foot rest and flush pipe complete including provision of concrete bedding 1:2:4 type B0

Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 630x450 mm with pedestal , 32mm PVC pipe, excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete and all as specified

Supply and fixing in repair Vitreous china EWC 'P' or 'S' Trap , white including Plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for EWC. Complete making good to floor fixing bolt all as specified and directed.

Supply and fixing in repairs 100mm/75 mm stain less steel grating.

Supply and fixing in repairs chromium plated wall mixer 3-in-1 system(Wall Mixer with overhead and hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower for fixing in 15 mm dia pipe complete all as specified and directed. Make: Jaquar CAT No QQT-7281 or equivalent cat No of make mention in Appx A

Supply and fixing in repairs chromium plated over head shower 180mm Square with arm 400x25x25mm square shape for wall mounted shower with flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar cat Part no OHS-CHR-1755 or equivalent cat No of make mention in Appx A

S&F in repair long body bib cock fancy type 15 mm dia chromium plated with crutch or butterfly handle,serewed down,screwed for MS pipe or for brass ferrule complete all as specified and directed. Make Jaguar cat pt No QQT-7037 or equivalent cat No of make mention in Appx A

S&F in repair angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15 mm bore pipe complete all as specified and directed. Make - Jaquar cat pt No QQT- 7053 or equivalent cat No of make mention in Appx A.

S & F in repairs two way stop cock/angle cock fancy type with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S & F in repairs CP brass center hole wash hand basin mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. Make : Jaquar model No KUB-35009NFB or equivalent cat No of make mention in Appx A

S&F in repair towel ring 200 mm dia and made out of 8-10 mm dia hollow tubes superior quality complete all as specified and directed. Make Jaguar Cat pt No AQN-7721 or equivalent cat No of make mention in Appx A.

S&F in repair Glass shelves fancy type 8 to 10 mm thick glass 550 mm long complete all as specified and directed. Make Jaguar Cat pt No AQN-7771 or equivalent cat No of make mention in Appx A.

S&F in repair glass corner shelves fancy type 6 mm thick 225x225 mm size complete all as specified and directed. Make Jaguar Cat pt No ACN-1173 or equivalent cat No of make mention in Appx A.

S&F in repair CP brass soap dish fancy type complete all as specified and directed. Make - Jaquar cat pt No AQN-7731 or equivalent cat No of make mention in Appx A

Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified.

Supply and fixing 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed.

Material and labour for Timber framed and fixed of Second class clean sawn hard-wood in scantlings. Complete all as specified and directed.

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats.(minimum weight 190grms)

S&F 50mm dia PVC pipe low density (LDPE) of pressure 6kg/CM2 fixed to wall or laid in floor as waste pipe.

S&F 75 mm out let PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete B1 (1:2:4 ) using 20 mm graded stone aggregate all as specified and directed

Demolition and breaking up or down PVC /AC/CI /Cement rain pipe fixed in any position internal dia of pipe 100mm all as specified and directed

S&F 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified

S&F 75mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified

S&F PVC (SWR) bends 110 mm dia provided with access door all as specified and directed

S&F PVC (SWR) bends 110 mm dia all as specified and directed

S&F PVC (SWR) bends 75 mm dia all as specified and directed

S&F PVC (SWR) bends 75 mm dia provided with access door all as specified and directed

S&F PVC (SWR) vent cowl 110 mm dia all as specified and directed

S&F PVC (SWR) junction single (single T) 110mm equal or unequal all as specified and directed

S&F PVC (SWR) junction double (Double T) 110 mm equal or unequal all as specified and directed

S&F PVC (SWR) junction single (single T) 75mm equal or unequal all as specified and directed

S&F PVC (SWR) junction double (Double T) 75 mm equal or unequal all as specified and directed

Demolition of reinforced cement concrete in floors , beams , chajjas , landing slab in any position or height and similar suspended works.

M&L RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in slab, chajja, ,landing slab in any position or height and similar suspended works. etc complete.

Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick horizontal or sloping.

M&L 10mm dia and over TMT bar, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia) including welding, riveting etc

Supply and fixing aluminium powder coated frame section 80 x 44mm, 16 Gauge thick for cubical partition, but including 5mm thick plain/tinted / heat reflecting glass pan/ 10mm thick partical board with and necessary jointing cleats, rubber beading, aluminium powder coated snap beading, screws, aluminium powder coated Flat for fixing etc. Complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)

Supply and fixing for 25mm dia chromium plated steel drapery curtain rods including brackets, end finials(Latoo),for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc complete all as specified and as directed by Engr- in -charge

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan exc 6m mean radius complete all as specified and directed.

All as per item No 113 above here-in-before but except bricks

M&L for brick work with sub class 'B' brick size in cement mortar 1:4, straight or curved on plan to any radius in half brick wall etc., complete all as specified and directed. .

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including necessary forms mould mitred /stopped ends etc

M&L PCC 1:3:6 type C2 in surface channel or drains including necessary form works, stops, moulds etc incl demolition of concrete.

Supply and fixing for Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws in roofs, walls etc. with grade of zinc coating 275. in roof covering as specified as specified

All as per item No 118 but except Sheets Note: Old sheets obtained from item No 10 will be used.

S & F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275. Complete all as specified

M & L for tightening bolts and closing bolt holes, etc.to rectify the leakage/ seepage, in old roof of corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts if required, all set in stiff white lead Complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc steel and iron surfaces and applying two coat of synthetic enamel paint of any description over 10cm width or girth in Camouflaging CCD pattern as approved complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 2mm thick Fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

M&L for providing cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, post/ Kerb/parapet etc complete all as specified and as directed.

Material and labour for structural steel work as in truss, rafter purling, made out of angle/Hollow pipe/tube section including jointing cleats, plates flat iron , gusset plates, rails, braces etc Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed.

M&L for heavy duty exterior grade tile textured finish of 300X300X10 mm thick mic/vitrified tile laid over and including 10 mm thick rendering in CM 1:4 as in steps complete all as specified and directed

S&F 18/19mm thick prelaminated particle board interior grade, prelaminated on one side with decorative choice lamination fixed with screws to timber frame work including teak wood beading complete all as specified and directed.

M&L pressed steel frames for cup board chowkhats of size 60x40mm with one or more rebates incl necessary fixing lug, hold fasts etc and one coat of red oxide primer complete.

Taking out old wooden boarding as in from kitchen cup boards and M&L kitchen shutters and partition of Factory made Solid PVC embossed shutter 18mm mm thick (stiles), with 2mm thick Moulded PVC prelam colored sheet on the front of face and fixing in frame at site as per specifications withall around FRM sheet , PVC particles board 18mm thick as directed by Engr- in -charge. incl all iron mongry such as appropriate no of knobs, handles 75mm long, ball catchers, piano type hinges etc Note- Measurements will be taken as flat.

S&F Steel plate rack made of stainless steel 1 mm thick over all size 600mm x 750mm complete all as specified and as directed by Engineer-in-charge

Dismantling of SGSW drain pipes/NP-2 pipe of any bore jointed in cement mortar of any size and description

M& L for Sail-glazed stoneware drain pipes of Internal diameter of pipe in 150mm laid in trenches and jointed as specified & directed by the Engineer-in-Charge.

PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified and directed.

M&L for Concrete bed to drain pipe incl. packing under hanching against the side of pipes, 150 mm bore, in cement concrete (1:3:6) type P-2 (using 40mm graded stone aggregate) after laying and testing of pipe complete all as specified and directed.

M & L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint (Camouflage painting) all as specified and as directed.

Material and labour for applying one coat of synthetic enamel paint on steel surface of any description over 10cm width or girth incl preparation of old steel surfaces complete all as specified and directed.

Material and labour for one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including preparation of old painted wooden surfaces of all as specified and directed by Engineer-in-Charge.

Taking down existing GI hook and S&F for GI hook of 8mm dia with nut, bitumen washer and GI washer to fix for Corrugated mild steel sheet roofing with MS tubular purlins all as specified and as directed

S&F in repair Vitreous china under counter wash hand basin white oval safe of size 550 x 400 mm including fixing or supply of waste pipe etc, complete all as specified and as directed by Engineer-in-Charge.

M&L Hard core of Broken stone Boulders of gauge n.exc 63mm deposited spread & levelled in layers n exc 15cm watered and rammed to a true surface thickness all as directed

S&F in repair , 6 mm thick Plywood, grade BWR, type BB, fixed with nails or screws to timber frame work, complete all as specified and as directed by the Engr-in-Charge.

S & F for Wooden planks of second class hard wood, 20mm thick, planed one side and edges tongued and grooved or rebated fixed, in repairs to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, complete all as specified and directed by Engineer-in-Charge.

M&L for 100 user capacity Soakage well in soft / loose soil, PCC 1:3:6 in foundation, 150 mm thick, wells of Honey combed brick work with Cement Mortar 1:4 with using sub class ‘B’ old size brick, PCC bend using 1:2:4 concrete at every 1.00m Ht, 115mm thickness of brick work should be increased at every 0.75m depth and filling brick bats in the wall upto 2.00 height and provide RCC slab 100mm thick of M-25 grade concrete, complete size 3.50m dia and 4.00m depth complete all as specified in TD-CE/AF/STD-15/2000 Sheet No 1/2 and 2/2 dated 05 Jan 2000.

Taking down copper / aluminium point wiring (light, fan, socket & power) complete incl fixtures and fittings such as switches, ceiling rose, pendent holdes, regulators, sockets, light fitting etc and making good disturbed surface of wall, floor etc complete as specified and directed.

Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC rigid conduit not less than 20 mm dia, including all accessories like bend, tees, junction boxes etc., 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc and including sunken type pressed steel terminal box of suitable size for modular type switch with cover plate & frame complete. Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

All as per item No 145 above but point wiring for one 5 / 6 Amps socket outlet on independent board controlled by one-way switch.

All as per item No 145 above but point wiring for one 5 Amps socket outlet on same board controlled by one-way switch.

All as per item No 145 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

S&F modular one way switch 6 Amp 240 volt marked light / fan suitable for one module etc complete as specified and directed.

S&F Modular 6 Amp 5 pin universal socket suitable for two module , 250 volts complete all as specified and directed.

S&F modular switch one way 16 Amps 240 volts suitable for one module complete as specified and directed.

S&F Modular 6 /16 Amp socket suitable for two module , 250 volts complete all as specified and directed.

S&F modular step type two module fan regulator suitable for 120 watt 250 volts complete as specified and directed.

M&L for ceiling rose with three terminal as per relevant IS complete as specified and directed

S&F in repair energy efficient LED tube light fitting with built in LED & integral LED driver 18 to 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engr –in-charge.

S&F in repair energy efficient LED tube light fitting with built in LED & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engr –in-charge.

S&F Energy saving new generation 10 W LED IP 65 bulkhead luminair with opal diffuser etc complete as specified and directed by Engr-in-charge

S&F recess mounting 36 watt LED ultra slim ceiling light with extruded aluminium housing and milky diffuser incl suitable size driver and 3 core flexible cord from ceiling rose to connector of fitting etc complete as specified and directed

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way TPN (VTP) suitable for MCCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 12 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed

S&F MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 6-32 Amp breaking capacity 10 KA etc all as specified and directed.

S&F MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 63 Amp breaking capacity 10 KA etc all as specified and directed.

S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 63 Amps 10 KA breaking capacity etc all as specified and directed.

S&F MCCB Four pole ISI marked working on 415 volts 50HZ AC supply for incomming & out going controlling system of capaicty 100 Amps, 16 KA breaking capacity lcs=100 % lcu etc all as specified and directed.

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke, drawn through and including heavy duty rigid PVC conduit not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling, complete. Note: (i) 2 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment.

Supply and fix in repair heavy duty exhuast fan 300mm, 900 RPM single phase incl all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc complete as specified and directed by EIC.

Supply and fix in repair heavy duty exhuast fan 450 mm, 900 RPM single phase incl all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc complete as specified and directed by EIC.

Supply and fix storage type water heater 5 star rated, 50 liters capacity vertical wall mounting type made out of CRCA outer body, stainless steel storage tank, titanium enameled heating element, thermostat, thermal cutout, glass wool, fixed in position as per manufacturer's instruction & writing the MES No etc and unserviceable water heater deposited in MES store yard complete as specified and directed by EIC .

Supply and fix in repair ceiling fan five star rated of 1200 mm sweep compete with blades, down rod canopy and electronic type fan regulator etc including hanging in position and connecting with 3 core, 0.50 Sqmm copper conductor PVC insulated and PVC sheathed round cable from ceiling rose to fan and unserviceable fan deposited in MES store yard complete as specified and directed by EIC .

Supply and fix in repair metal clad single pole and earth enclosure with two pin and earth plugs and socket complete with one single pole MCB 20 Amps, 230 V, C type.

M/S BASHIR AND SONS

M/S LUCKY BUILDERS

M/S Thakur & Sons

M/S A.R.TANTARY

M/S FAROOQ AND SONS

M/S WANI AND SONS