Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹24.9 L
EMD Value
₹49,800
Closing Date
16 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Internal Painting of Workers Canteen at ARDC, HAL DC.
9013
TENDER NOTICE/NCP/21/24-25
Works
Contract Section Civil-FMD-Bangalore
₹0
₹49,800
16 Aug 2024
1 Aug 2024
1 Aug 2024
16 Aug 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Dismantling old plaster or skirting including raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts, etc., complete and stacking within 50meters lead of area 3Sq m and below each, etc., all complete as directed by Engineer-in-Charge.
Plastering to internal brick/block wall with 15mm thick on the rough side of single or half brick wall of cemnet mortor (1:6) including leveling, curing and making the level smooth and at all heights, etc., all complete as directed by Engineer-in-Charge.
Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge.
Painting old plastered interiors surfaces with 2 coats of low VOC with less than 50g/lit premium plastic emulsion with acrylic base of approved make, colour, shade, tint and pattern at all levels, over a water thinnable priming coat with cement primer including preparation of surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even by applying putty in patches and repairs whereved required to achieve an even and msooth surface with all necessary scaffolidng and safety arrangements like safe working platform, safety harness, PPEs, etc., all complete as directed by Engineer-in-Charge. The area has to be carodned off with necessary arrangements like tarpaulin sheets etc to ensure no dust is spreading to the surrounding areas. Site clearance will be given in a phase wise manner and adequate resources should be deployed based on the site clearances to complete the work within time. Prior approval of the make and shade of the paint is to be obtained from EIC with data sheet fulfilling the scope of work.
Painting with two coats of synthetic enamel paint for steel surfaces of approved shade and manufacture with a coat of primer including preparation of surface by wire brushing/sand papering the loosen paint and wiping the surface clean with mineral solvents to remove grease and hand marks, etc., prepare the surface for smooth & even using sand paper, metal paste for steel surface before painting the first coat. Top coat of desired shade shall be applied after undercoat is thoroughly dried and rubbed with fine grade of abrasive paper to ensure smooth and even surface, free from brush marks, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing aluminium work for doors, windows ( 3 track/2 track windows as instructed by EIC), ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket, etc., Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, etc., all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing aluminium shutters of doors, windows ( 3 track/2 track windows as instructed by EIC) & ventilators including providing and fixing hinges / pivots / handles / locks and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15), etc., all complete as directed by Engineer-in-Charge.
Providing and fixing glazing with float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) in aluminium door, window, ventilator shutters and partitions, etc., with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge.
Painting on previously painted interior surfaces with 1 coat of primer and 2 coats of epoxy resin paint (with very good abrasion resistance, excellent chemical resistance to alkalis, solvents, salt (upto 80 degrees centigrade) and water and a continuous temparature resistance of 93 degrees centigrade and intermittent temparature resistance of 120 degrees centigrade ), by maintaining proper inter-coat interval as per the technical data sheet specifications of approved brands like Berger/Asian/Dulux or any equivalent conforming to above specifications, after carrying out the surface preparation works mentioned below. To smoothen the surface approved polyster putty should be applied after application of one coat of primer and next coat to be applied over dried puty. Dried polyster putty to be roughened with emery paper before application of primer. Surface preparation works prior to painting : previous paint has to be removed by emery paper and wire brush . Degreasing of the oil and grease by using solvent like turpentine and or thinners is to be carried out.Dust is to be removed after mechanical cleaning of the substrate. After surface preparation seal the cracks with approved crack filler and after the curing /drying of the crack filler, the surface has to be roughened with emery paper. The surface should be free from oil, grease, dust, debris, fungus and moss.
Painting on previously painted interior surfaces with 1 coat of approved primer and 2 coats of water borne polyurethane finish paint having antifungal and antibacterial charectaristics and excellent water resistance properties and is water washable ( with Tensile strength of 50kg/sq cm , Elongation at break of : 100% , Wet scrub resistance : Passing of 2000 cycles without failure, Abrasion resistance of 110 mg wt loss maximum (CS 10 wheel with 2 X 1 kg load, 1000 cycles and Flexibility : Passes 0.25" mandrel) by maintaining proper inter coat interval as per the technical data sheet specifications of approved brands like Berger/Asian/Dulux or any equivalent conforming to above specifications , after carrying out the surface preparation works mentioned below. To smoothen the surface, approved cement putty should be used after application of one coat of primer and and the next coat is to be applied over dried putty. Dired cement putty is to be roughened with emery paper before application of primer. Surface preparation works prior to painting : previous paint has to be removed by emery paper and wire brush . Degreasing of the oil and grease by using solvent like turpentine and or thinners is to be carried out.Dust is to be removed after mechanical cleaning of the substrate. After surface preparation seal the cracks with approved crack filler and after the curing /drying of the crack filler, the surface has to be roughened with emery paper. The surface should be free from oil, grease, dust, debris, fungus and moss.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN21.pdf
TENDER_DOCUMENT • 1.70 MB
38PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
38PQ.pdf
TENDER_DOCUMENT • 0.21 MB
38PB.pdf
TENDER_DOCUMENT • 0.31 MB
38amd.pdf
TENDER_DOCUMENT • 0.42 MB
38PBF.xlsm
TENDER_DOCUMENT • 0.03 MB
38Undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
38ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
38Checklist.pdf
TENDER_DOCUMENT • 0.17 MB
38TB.pdf
TENDER_DOCUMENT • 2.55 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .