Providing Interior and other allied works to Seafarers Club house inside Kamarajar Port

Amount

CIVIL WORKS

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including Dewatering, Getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, exceeding 1.5 m depth , Including Dewatering, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated approved earth in trenches, sides of foundations, plinth, etc; in layers not exceeding 20 cm depth breaking clods, consolidating each deposited layer by ramming, watering and dressing, etc; complete for lead up to 50m and all lifts etc., complete as per specifications.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 crushed stone aggregate : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 crushed stone aggregate: 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying Cement Concrete (PCC) 1:1.5:3 (1 Cement : 1.5 Fine Aggregate : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Excluding centering and shuttering all complete as per specification and as directed including the cost of labour, materials, tools, equipment, etc complete.

Providing Steel reinforcement for all RCC items including decoiling, cutting, hooking, bending, cranking, fabricating to required shape, placing in position and tying the system with soft drawn annealed GI binding wire of diameter not less than 1.00mm with 2strands etc; complete all as per specifications and the directions of Engineer-in-Charge. All works on floor & levels upto 5. Thermo-Mechanically Treated bars of grade Fe 500 - D or more

Providing and removing necessary centering, shuttering, strutting, propping etc, and removal of formwork for sides and soffits of RCC members including cost of all materials, labour, necessary formwork, with all leads and lifts, loading and unloading charges, machineries and equipments transportation cost and conveyance of all materials and all other incidental charges etc., complete for successful completion of work as per specifications and as directed by the Engineer-in-charge. - Formwork to sides of concretefoundations, footings, bases ofcolumns, raft and raft beams,sides and soffits (if any) offoundation and plinth beams;and similar work; vertical or tobatter

Providing and constructing Brick work with common burnt clay Non modular bricks of class designation 5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 crushed stone aggregate). - upto plinth level

Providing and constructing Brick work with common burnt clay Non modular bricks of class designation 5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 crushed stone aggregate). - All works above plinth level upto floor V level

Providing and constructing Half brick masonry with common burnt clay non modular bricks of class designation 5 in superstructure above plinth level up to floor V level in in cement mortar 1:4 (1 cement : 4 crushed stone aggregate). And providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry.

Providing 15mm TK cement plaster in cement plaster 1:6 (1 cement : 6 fine crushed stone aggregate) to smooth surface of walls, columns,/kerb walls piers etc., applied, finished smooth and cured, complete.

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. including removing and carting of all scoffolding materials. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 crushed stone aggregate) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% Concentration

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water roofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound onforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing & Grouting of dowel tubes / Shear keys / Joints of precast members with M-60 grade cementitious grout (Non Shrink) of approved make by suitable means (Free flowing /pump),curing etc. Complete as per directions of Engineer-in-charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed cementitious grout (non shrink) of approved make in dowel tubes / Shear keys / Joints of precast members.

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks each

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 crushed stone aggregate : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing pipe etc.

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 crushed stone aggregate: 6 graded stone aggregate 20 mm nominal size) including disposal of malba.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Dismantling the existing RCC structures including collecting and handover the retrived msterials to department scrab yard withinlead of 3 km all as directed including all labour, tools, transport equipments, etc., complete.

Dismantling the existing Brick work in cement mortar including collecting and depositing the debris within a lead of 50 m all as directed including all labour, tools, equipments, etc., complete.

Dismantling the existing PCC flooring or rich mix wherever required without disturbing nearby structures including collecting and depositing the debris within a lead of 50 m all as directed including all labour, tools, equipments, etc., complete.

FLOORING

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. - Size of Tile 600 x 600 mm (Basic cost of Tile - Rs.800/Sq.m)

Providing and laying Anti skid/Matt finish Ceramic floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. - Outdoor tiles for Swimming pool deck area. (Basic cost of Tile - Rs.600/Sq.m)

Providing and fixing ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 crushed stone aggregate) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Basic cost of Tile - Rs.550/Sq.m)

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 Crushed stone aggregate) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (Basic cost of Granite - Rs.1600/Sq.m)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 Crushed stone aggregate) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. - Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (Basic cost of Granite - Rs.1600/Sq.m)

Granite (of any type) work table (rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. (Basic cost of Granite - Rs.1600/Sq.m)

Providing and fixing of 20/25mm thk Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 Cruched stone Aggregate )

Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 Cruched stone Aggregate) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Providing & fixing of GYM Flooring of 10mm thickness made of Recycled rubber granules and EPDM granules in roll forms as per the IS:3400, IS: 1237, ASTM D 792, 1709, 2240 Certifications. The rate should be inclusive of necessary adhesive used for fixing on floors and wastage etc. all complete as per the direction of the site Engineer. The layed area will be taken for measurements. (Basic cost of Floor - Rs. 1560/Sq.m)

Providing & fixing of INDOOR SPORTS PVC Vinyl Flooring (Solid Colour) of 6.5mm thickness with 5.4 Kg/Sq.M in weight in roll forms. The floor should have shock absorption of 32% min and vertical deformation of lesser than 3.5mm and should be anti bacterial. This flooring should be laid on the 6mm thk rubber Cushion which be pasted on the floor. The rate should be inclusive of fusion welding of roll joints & with necessary adhesive used for fixing and wastage etc. all complete as per the direction of the site Engineer. The layed area will be taken for measurements. (Basic cost of Floor - Rs. 1350/Sq.m)

Providing & fixing of INDOOR SPORTS PVC Vinyl Flooring (Wooden Colour or equvalent ) of 6.5mm thickness with 5.4 Kg/Sq.M in weight in roll forms. The floor should have shock absorption of 32% min and vertical deformation of lesser than 3.5mm and should be anti bacterial. This flooring should be laid on the 6mm thk rubber Cushion which be pasted on the floor. The rate should be inclusive of fusion welding of roll joints & with necessary adhesive used for fixing and wastage etc. all complete as per the direction of the site Engineer. The layed area will be taken for measurements. (Basic cost of Floor - Rs. 1450/Sq.m)

Providing & painting of OUTDOOR SPORTS SYNTHETIC Acyrlic Flooring of 8 layer system of 4 to 5mm thickness . The floor should have 1 layer of primer, 1 layer of resurfacer, 3 layers of cushion, 2 layers of sand coat and a final layer of smooth coat of paint. The top layer should have a paint marking of boundaries required as per the sports. The synthetic paint court should be applied on the existing concrete surface free of dirt & dust all complete as per the direction of the site Engineer. The layed area will be taken for measurements.

FALSE CEILING

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge with 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 sqm )

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, uspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in- Charge with 15 mm thick tegular/butt edged without perforation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21 sqm

Supplying and fixing the ceiling Panelling with the following specification fixing horizontally and vertically in position of wall. Fixing the water proof ply wood 9mm thick board over the country wood planks support from the ceiling. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and fevicol giving neat finsih. The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Engineer Incharge concerned before use on work, etc., complete as per standard speicification - Veneer ceiling panelling. (Basic cost of Veneer - Rs. 800/ Sq.M)

Providing & fixing of Factory made PVC ceiling panel (Wooden finish) with click on system fixing between the panels. The PVC panels are fixed with necessary G.I. framework & Support from the ceiling all complete as per the direction of the site incharge. - (Basic Cost of PVC Panel - Rs.2150/ Sq.M)

DOORS & WINDOWS

Providing and fixing of WOODEN ACOUSTIC DOOR of Size 900x2400: – 55mm to 76mm thick sandwich type composite sound reducing flush door shutters. The combined assembly set of door frame and door shutters to be as per following details: (a) Door frame shall be of teak / hard wood of size – 150 mm X 100 mm, including making necessary grooves in the frame for fixing of hollow bulb type EDPM gaskets on rebates to block noise leakage from gap in between door frame and shutter. (b) The frame of shutter shall be made from 40 mm thick teak / hard wood stiles and top & bottom rails of size 94 mm and core made of lock rail 100 mm wide and 40 mm thick and three additional strips 50 mm wide and 25 mm thick (minimum) . (c) The core of door shutter shall be filled with acoustic insulation material , sound absorbing and damping material. (d) Face panels shall be of 12 mm thick Marine ply boards of approved make conforming to relevant IS codes / International Standards on both sides of the core of the shutter with required primer at the unexposed surface . One side of ply board shall be fixed to the core of the shutter along with a 5 mm thick Neoprene rubber sheet on its inner face. (e)4 mm OST of approved make shall be bonded with 12 mm thick marine plyboard on both face of shutter by using high strength cross linked PVAC based adhesive. (f) Dropdown Seal: – Excellent quality range of Internal Automatic Dropdown Seal, which are manufactured from high grade quality raw materials. These Internal Automatic Dropdown Seal can be customized as per our precious customers specifications. These Internal Automatic Dropdown Seal are widely known for its durability and quality. Internal Automatic Dropdown Seal can be availed at industrial leading price. Resists sound upto 37db, air, insects, cold smoke, light. Designed for timber (wooden) doors. (g) Hardware- The door assembly shall be fixed to the door frame with heavy duty stainless steel hardware i.e. Door Lock, SS Bal bearing Hinges , SS door handle ‘D’ type back to back, SS Tower bolt -Both side Veneer finished door of size 900 x 2400mm.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. - 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only.

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing CIRCULAR vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):

Providing and fixing chromium plated brass handles with necessary screws etc. complete: - 125 mm

Providing and fixing chromium plated brass handles with necessary screws etc. complete: - 100mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm

ABS DOOR / EQUIVALENT Specification: Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Engineer Incharge before use on work.

Providing and fixing 12 mm thick frameless toughened glass door shutter with all hardware of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge

Providing and fixing of 12mm thk glass door handle of SS finish of 32mm dia, 1200mm long with floor lock set from "OZONE or DORMA XLC"

Providing and fixing 12 mm thick frameless toughened glass partition fixed on 'D' Brackets on top & bottom with necessary silicone clear sealant, handling of glass, scaffolding etc., all complete as per direction of Engineer-in-charge

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness.

PAINTING

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. - Only One coat

With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as permanufacturer's specifications including appropriate priming coat, preparation of surface, etc.complete.On steel work

Texture paint – Apply 1st coat of Archi Concrete paste form on the primed surface using a steel trowel. Allow it to dry for 45 mins to an hour. Apply 2nd coat of Archi Concrete paste when the 1st coat is in semi-dry condition. Make the desired pattern using requisite tools. Allow it to dry for 5-10 mins. Buff the surface using a Steel Trowel. Excess buffing will flatten the surface & pattern will not visible. Buff the surface gently. After 6 to 8 hrs of complete drying, apply the 1st coat Protective Coat (untinted and diluted by 200% water). After 3 to 4 hrs of drying apply tinted 2nd coat (diluted by 200% water) using Sponge Roller & CW sponge in the direction of the pattern (Vertical & Horizontal). Clean excess material using wet CW Sponge. In hot & dry climatic conditions, wet the surface with water before applying 2nd top coat to avoid section lines. (Basic cost - Rs.1650/ Sq.m)

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. - PARITION, DOOR FRAMES & DOORS

STRUCTURAL GLAZING & ACP WORKS

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). for STRUCTURAL GLAZING WORK

Supplying, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: a) preparation of shop drawings for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including. (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required size. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.

Providing, assembling and supplying visionglass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-inCharge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge

ACP CLADDING - Supplying, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

EXTERIOR WORKS

Providing and fixing of 2.5mm thk Modified Clay Mateial (MCM) cladding (Product Code -Traventine yellow finish) on the plastered wall with MCM 2C Adhesive. The spacers of the tile should be filled with necessary grouting with matching colour inlcuding labour, material, transportation, tools etc., etc complete asdirected by Engineer In Charge- Green Product with IGBC Certification. (Basic cost of Panel - Rs.3400/Sq.m)

Providing , fitting & fixing of 6mm thk HPL Cladding on 1"X1.5" almunium section frame work with necessary hardwares. The sections are to be placed 600mm c/c on both directions. The HPL Panels to be fixed to be framework by rivert system at regular intervals with matching colour panel including cost of all labour & material etc., complete. (Basic cost of Panel - Rs.4300/Sq.m)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50 mm dia 304L Grade Stainless Steel pipe of 1.60 mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25 mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc.

Providing & fixing (S.S Railing with glass,) – Supply and installation of mobel make or equivalent, SS 304 grade 900mm high railing made of SS304 grade handrail pipe of 50mm OD and 1.6 mm thickness polish with automatic round polishing machine to get a uniform hairline finish. K240 mounted with help of adjustable solid neck support on balustrade of approved design at 900mm centre to centre, (or actual division as per site conditions), fitted with four Nos, solidglass connectors for holding the infill glass of 12mm thick toughened glass connector to befuitted with balustrade with the help of s.s screw overallmounted on s.s 304 grade solid base plate 100mm x 8mmwith the help of dash fastners (HILTI/FISCHER make) - 1000 mm High

Providing & fixing of 100 x65 mm Size of Aluminium box section with wooden finish framed with all sides with Alumnium box section on ceiling cut out with necessary Aluminium 'L' sections as per detailed Arch. DWG and instructed by EIC including materials labours, fixing accessaries and Scaffolding etc., complete.

Providing and fixing of sandwiched glass of 13.65mm thk (6mm toughned glass+1.65mm pvb lamination+6mm toughned glass) glass made of 6mm thk toughned glass on both sides with 1.65mm thk PVB Lamination in between above Aluminium pergola all complete including transport, shifting, handling of glass as per detailed drawings and direction by Engineer-in-Charge .

Providing & fixing of SIGNAGE of KPL Logo in Backlit ACP cladded box on sides & rear & Acrylic on front with LED lights inside with the specified exterior grade Stickering. The entire box will be supported from rear with necessary MS support inclusive of all labour, materials, tool, scaffolding etc. as per the direction of Engineer-in-charge. - Size 8'-0"x 4'-0"

Providing & fixing of SIGNAGE of KPL Logo in Aluminium cut letters with colour powder coating as per the logo design. The indivual Letter should have a necessary support to be fixed on the wall inclusive of all labour, materials, tool, scaffolding etc. as per the direction of Engineer-in-charge. - Size 5'-0"x 2'-6"

Printing of KPL Logo in Swimming Pool PVC Liner Tile .

CARPENTRY WORKS

Providing and fixing of 75mm Wall Panelling using one side teak wood sheet on both sides with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall, floor & ceiling at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood on both sides using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Engineer Incharge concerned before use on work etc., complete. - Both side Veneer finished partition - FULL HEIGHT. (Basic cost of Veneer - 800/Sq.m)

Supplying and fixing the Wall Panelling with the following specification fixing horizontally and vertically in position of wall. Fixing the water proof ply wood 9mm thick board over the country wood planks. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and fevicol giving neat finsih. The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Engineer Incharge concerned before use on work, etc., complete as per standard speicification - Veneer Wall panelling (Basic cost of Veneer - 800/Sq.m)

Supplying and fixing the curved Wall Panelling with the following specification fixing horizontally and vertically in position of wall. Fixing the water proof ply wood 9mm thick flexi board over the country wood planks framework in curves as per the drawing. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and fevicol giving neat finsih. The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Engineer Incharge concerned before use on work, etc., complete as per standard speicification - Veneer Curved Wall panelling (Basic cost of Veneer - 800/Sq.m)

Supplying and fixing of 150mm to 250mm deep Veneer Jamb lining with the water proof ply wood of 18mm thick board on the wall surface sides and the front both sides to be finished with 40x12mm thk ply board finished with veneer Architrave on all sides. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and fevicol giving neat finsih. The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Engineer Incharge concerned before use on work, etc., complete as per standard speicification - 150mm to 250mm deep Veneer Jamb lining. (Basic cost of Veneer - 800/Sq.m)

Supplying and fixing of 75mm thk, 300mm deep Veneer Ledge with the water proof ply wood of 18mm thick board on the wall surface with necessary internal plywood support and finished with veneer on all sides. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and fevicol giving neat finsih. The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Engineer Incharge concerned before use on work, etc., complete as per standard speicification - Veneer Ledge. (Basic cost of Veneer - 800/Sq.m)

Supplying and installation of Anutone / Topakustiks / Idea Tec / Wood Fit / Equivalent Brand of Acoustic Wooden Wall Panelling with fire retardant grade pine wood fibre slats of size 2430 x 128 x 16mm with lineal perforation of 2mm back lined with soundtex black acoustical fleece 0.27mm thick, 63 g / m2, tongue-groove edge for a seamless look, 5 test fire retardant grade with noise reduction coefficient not less than 0.75 NRC to absorb low and mid range frequencies from 125Hz to 4000Hz. GI strut CC50 frame work not more than 60 cm centre to centre using GI channels are fixed on the wall, over which an acoustic filling polywool material sound synth of 500 gsm density of 50mm thick has fixed and finally the panels are fixed and finished, so as to have an neat appearance as directed by the departmental offices. The cost includes cost of material, cost of Labours, scaffolding, transportation, conveyance, etc., complete complying to standard specication. - Rafters

Supplying and installation of Anutone / Woodfit / Saint Gobian / Equivalent Brand of Acoustic Fabric Wall Panelling of stretch fabric NRC wall fabric system by using FR Grade NRC fabric of size 1400mm width shall be stretched by using CC 25 with infill of synth pf polywool 10 X 25 mm thick, rigid vinyl stretch tracks half wrap / full wrap 15mm (FS15) and midseam 15mm (FS15), strand board, synth PF infill with requisite accessories & tools. CC 50mm is first installed on the wall along with the marking lines with metal fasteners inserted at 300mm centers. FS15 tracks to be installed on wooden base, after applying stick S7 adhesive on both surfaces for a true and continuous secure grip, and heavy duty fasteners at 150mm centers on one / both sides of stretch tracks. Strand square edge magnesite bonded pinewood fiber panels of size 600 x 2400 x 20mm having density 400 kg / m3, weight 4 kg which is fixed to wall with suitable fasteners. Sound synth PF polywool 10 x 25mm thick adhered on strand panel by using Stick 7 adhesive. Fabric of width 1400mm is then aligned to the stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. The systems to achieve noise reduction coefficient not less than 0.85 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specication. - Home Theatre Acoustical Wall panelling

Providing and fixing of 8mm thk Charcoal Rafter panel as per the approved design over 12mm thk Ply wood panelling in line with the surface. The rafter should be fixed in the tounge & groove joint with necessary adhesive over ply board surface all complete as per the direction of engineer in charge.(Basic cost of Rafter - Rs.3500 Sq.m)

Providing and fixing of 675mm deep, 2 level Bar counter storage with working table @ 3'0" high and 300mm deep ledge @ 4' 0" level using 19mm thk BWP PLY with 4mm thk OST Sheet & charcoal rafters on exposed side and 0.8mm thk laminate on other side as per the drawing. The storage shall be with intermediate shelves with openable shutters. The edges to be finished with 1st quality teak wood beading all around with necessary polish. The openable shutters should be fixed with Hinges and multipurpose lock and handle for the shutters should be of Stainless steel or white metal handle in Brushed SS Finish of minimum 300mm high. The intermediate shelves should be placed as per the drawing as removable. All others to be completed as per the drawing. (Counter top finish not to be included in this rate)

Providing and fixing of 675mm deep, 2 level Reception counter storage with working table @ 3'0" high and 300mm deep ledge @ 4' 0" level using 19mm thk BWP PLY with 4mm thk OST Sheet & charcoal rafters on exposed side and 0.8mm thk laminate on other side as per the drawing. The storage shall be with intermediate shelves with openable shutters. The edges to be finished with 1st quality teak wood beading all around with necessary polish. The openable shutters should be fixed with Hinges and multipurpose lock and handle for the shutters should be of Stainless steel or white metal handle in Brushed SS Finish of minimum 300mm high. The intermediate shelves should be placed as per the drawing as removable. All others to be completed as per the drawing. (Counter top finish not to be included in this rate)

Providing and fixing of 12mm thk Solid Acrylic surface counter tops from "Hanex, Samsung or LG" on the existing counter top with 40mm thk edge to detail on all sides including pasting, bending, joining, buffing and cleaning etc. All others to be completed as per the drawing. (Measurement to be taken for the laid surface only) - Basic Cost of Solid Acrylic Surfcae - Rs. 650/-

Providing and fixing of 600mm deep storage using 19mm thk BWP PLY with 4mm thk OST Sheet on exposed side and 0.8mm thk laminate on other side.the storage shall be with intermediate shelves with openable shutters. The edges to be finished with 1st quality teak wood beading all around with necessary polish. The openable shutters should be fixed with Hinges and multipurpose lock and handle for the shutters should be of Stainless steel or white metal handle in Brushed SS Finish of minimum 300mm high.the intermediate shelves should be placed as per the drawing as removable. All others to be completed as per the drawing.

Providing and fixing of 450mm deep storage using 19mm thk BWP PLY with 4mm thk OST Sheet on exposed side and 0.8mm thk laminate on other side.the storage shall be with intermediate shelves with openable shutters. The edges to be finished with 1st quality teak wood beading all around with necessary polish. The openable shutters should be fixed with Hinges and multipurpose lock and handle for the shutters should be of Stainless steel or white metal handle in Brushed SS Finish of minimum 300mm high.the intermediate shelves should be placed as per the drawing as removable. All others to be completed as per the drawing.

Providing and fixing of 300mm deep OVERHEAD STORAGE UNIT using 19mm PLY finished with 1mm thk Laminate outside and .8mm thk laminate inside. the storage unit with openable shutters and to be fixed by Hinges.The intermediate shelves to be of 19mm PLY. The shutters shall be finished with 1mm thk Laminate outside and .8mm thk laminate inside & the edges to be finished with 1st quality teak wood beading all around with necessary polish. The handle for the shutters should be of Stainless steel or white metal handle in Brushed SS Finish of minimum 150mm high. All Hardwares like hinges, lock & drawer channels should be from "EBCO" or approved. All others to be completed as per the drawing. - WORKSTATION

Providing and fixing of 300mm deep OPEN STORAGE UNIT using 19mm PLY finished with veneer on all exposed surface.The intermediate shelves to be of 19mm PLY finished with veneer. The edges to be finished with 1st quality teak wood beading all around with necessary polish. All others to be completed as per the drawing.

Providing and fixing of 4" thk high density foam cushion over 9mm thk ply board lined with Fabric/Leatherlite and button as per the design and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, Fabrics and other materials to be used shall be got approved by the Engineer Incharge concerned before use on work etc., complete. (Basic cost of Fabric - Rs.650R/m)

Providing and fixing of 3mm thk Metallic finish ACP cladding over existing wood/ wall surface with necessary adhesive etc ., all complete as directed by Engineer In Charge

Providing and fixing of 5mm thk mirror over 18mm thk ply surface projected by 40mm from the finished surface with necessary adhesives as per the drawings. - Gym, Saloon, Rooms & Toilets-

Providing and fixing of 2.5mm thk Modified Clay Mateial (MCM) cladding (Product Code -Traventine yellow finish) on the plastered wall with MCM 2C Adhesive. The spacers of the tile should be filled with necessary grouting with matching colour inlcuding scaffolding, labour, material, transportation, tools etc., complete asdirected by Engineer In Charge- Green Product with IGBC Certification - (Type-01 for Internal Elevation) (Basic cost of Panel - Rs.3400/Sq.m)

Providing and fixing of 2.5mm thk Modified Clay Mateial (MCM) cladding (Product Code -Brick finish) on the plastered wall with MCM 2C Adhesive. The spacers of the tile should be filled with necessary grouting with matching colour inlcuding scaffolding, labour, material, transportation, tools etc., etc complete asdirected by Engineer In Charge- Green Product with IGBC Certification. - (Type-02 for Internal Elevation) (Basic cost of Panel - Rs.1950/Sq.m)

MISCELLANEOUS

Providing and fixing of Roller Blinds made of 38mmx38mm aluminium extruded top rail with powder coated finished enabled with control Mechanism to be louvolite and chain must be metal. Stops to be fitted top & bottom to eliminate over-run and it should have straight edge finish. The blinds should be of approved manufactures and complete as per the approved shade and texture.( Basic cost of Blinds - Rs 1600/Sq.M)

Providing, Installing & Commissioning of ROMAN Blinds made of approved Fabric cloth (Blackout or Transculent) with required lining cloth stitched with desired height of stacking of cloth when raised on heavy duty chain control sytem of 50mm x 20mm Alumnium head rail with side control, rear only inlcuding all accessories like Base rail etc. all complete as per the direction of Site engineer at site. (Basic cost of Basic of Fabric - Rs.650 R/m.)

Providing, Installing & Commissioning of CURTAINS made of approved Fabric cloth (Blackout or Transculent) with required lining cloth stitched with pencil pleat curtain header inlcuding all accessories like Tie Backs, Curtain rods, end caps, SS. Rings, etc. The Curtain rods should be of SS finish or Decortive finish with decorative end caps all complete as per the direction of Site engineer at site. (Basic cost of Basic of Fabric - Rs.650 R/m & Basic cost of End caps - Rs.1500/ Piece.)

Sun control film : Removing, cleaning of existing sun control film & Supplying, fixing Sun Control Film from 3M Suncontrol film Night vision 15 with 75% solar energy reduction of approved quality having size 3.8 micron thickness and fixing over plain glass in the Aluminium Window including cost of labour, material, equipments, machinery, transportation, loading and unloading, etc.,. complete as per material specification mentioned in the Technical Bid and direction of Engineer-in-charge. - 3M Make

Providing and fixing of Frosted film stickering with pattern as approved on plain glass surface including cleaning the glass surface & wiping of excess water while installing all works complete as per the direction of site engineer.

Providing and fixing of Sliding Mosquito Screen: Aluminium extruded from first melting, 6063 alloy with Powder Coatings of approved colour with Plastics components of nylon 6. Below are the specifications: Weather-stripping: 100% Polypropylene Screen Material: Stainless steel 304-grade Colour: Black PVC Coated. Sliding Profile - 50x18mm, Midbar Profile - 35x18mm, Bottom Track Profile - 62x31mm & Side & Top Profile - 62x31mm.

Providing and fixing of 4mm thick, 24" wide x 9" Ht. SS Plate 304 grade with text etched and painted to colour with necessary SS Hanging from the false ceiling as per approval. - Signage

Supply & fixing of Non-woven wall covering rolls with necessary Adhesive on wall & other required surface as per the direction of KPL Incharge. - (Basic Cost of Wall Paper - Rs.1614/Sq.m)

Supply & Erection of miniature model of an Ship made of acrylic or FRP material with ply base in an Glass or Acrylic enclosure of size 2.1m x 1m x 1.2m height. (Basic cost of Model- Rs.700000/ Piece)

ELECTRICAL WORKS & LIGHTS - WIRING IN PVC CONDUIT

Point wiring in PVC conduit, with modular type switch. Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated multistrand copper conductor wires in surface / PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated multistrand copper conductor wires etc. as required (Group A) and as per technical specification and as per latest IS / IEC

Point wiring in PVC conduit, Wiring for group controlled (looped) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated multistrand copper conductor wires in surface / PVC conduit, (without independent switch etc.) earthing the point with 1.5 sq.mm FRLS PVC insulated multistrand copper conductor wires etc.as required ( Group-A ) and as per technical specification and as per latest IS / IEC

Twin control point wiring in PVC conduit, with modular type switch Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated multistrand copper conductor wires in surface / PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated multistrand copper conductor wires etc.as required and as per technical specification and as per latest IS / IEC

Circuit/ submain wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated multistrand copper conductor wires in surface/ recessed PVC onduit as required and as per technical specification and as per latest IS / IEC

2 x 1.5 sq. mm + 1 x 1.5 sq mm earth wire

2 x 2.5 sq. mm + 1 x 2.5 sq mm earth wire

2 x 4 sq. mm + 1 x 4 sq mm earth wire

2 x 6 sq. mm + 1 x 6 sq mm earth wire

4 x 6 sq. mm + 2 x 6 sq. mm earth wire

4 x 10 sq. mm + 2 x 6 sq. mm earth wire

Supply and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed PVC conduit as required and as per technical specification and as per latest IS / IEC

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required and as per technical specification and as per latest IS / IEC

Supply and Fixing Power plug Point Modular type accessories: Supply and fixing of metal box of GI box with modular plate and cover in front on surface or in recess , including providing and fixing of 3 pin 5/6 amps. modular socket outlet and 5/6 amps. modular switch, connections, painting etc. as required. (For light plugs) and as per technical specification and as per latest IS / IEC

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. and as required and as per technical specification and as per latest IS / IEC

Supplying & fixing suitable size Gl box with modular plate and cover in fronton surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply and fixing of following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required and as required and as per technical specification and as per latest IS / IEC

15/16 Amp. Switch

3 Pin 5/6 Amp. Socket

6 pin 15/16 A socket outlet

Telephone socket outlet

T.V socket outlet

Bell push

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

Supply and fixing modular type electronic fan regulator: Supplying and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required and as per technical specification and as per latest IS / IEC

MCCB, MCB & DB’S

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

8 way , Double door

16 way , Double door

Supply and fixing of suitable size Weather Proof Box with surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. and as required and as per technical specification and as per latest IS / IEC

Supply and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) and as per technical specification and as per latest IS / IEC

4 way (4+12), Double door, Horizontal type

6 way (4+18), Double door, Horizontal type

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) and as per technical specification and as per latest IS / IEC

8 way (4 + 24), Double door

Supply and fixing 'C' Series, SP MCB : Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required and as per technical specification and as per latest IS / IEC

Single pole

Double pole

Triple pole

Triple pole and neutral

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing double pole flame proof enclosure recess along with 16/20 A 240 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40 A to 63 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required and as per technical specification and as per latest IS / IEC. 40Amp./63Amp. FP MCB

EARTHING & LIGHTNING ARRESTER

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) and as per technical specification and as per latest IS / IEC

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required and as per technical specification and as per latest IS / IEC

Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required.

Providing & fixing of 8mm solid aluminium round conductor with necessary holders at required interval as specified below: Meets the requirement of IS/IEC 62561-2: semi-hard (E-AlMgSiO5 ) with Holder,Glue , Connector,Joints,Etc,

Airtemination Rod 16/10 mm ( lighting Rod ) - 2 mtr

Lightning Counter - LDC display and Battery

SS TEST JOINT

Maintainance Free Earthing With Copper Rod of 17.2 mm Dia and 3 mtr length

LIGHT FITTING AND FAN

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing / Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as app roved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm) 36 WATTS

LED Down lighter (SMD Type) (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed /surface Down lighter (Round /square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K / 6000°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 12 -15 watt

LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt ) Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round / square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. "complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector

Supplying of LED Tube Light 40W Suspended Linear Connect luminaire. Well designed extruded aluminium housing linear profile with efficacy 110 lm/W and perfect optic controls. Suitable for modern open office space with 55mm width.with all necessary fixing accessories, arrangements and etc.Cost include all removal of the existing fitting's and handover to the officer, hardwares, screws, clamps, lead, lift and etc

Suppling Installation Testing & Commissioning of upto 20w WATT LED Slim profle surface mounted downlight with options of 700 to 2000 lumen as per technical specification and as per latest IS / IEC.

Supply, of 10W LED wall mounted mirror , System lumens of 1200, System Efficacy 100lm/W. CCT of 6500K. Designed for operations under diverse environment from 0⁰C to +45⁰C (Ta45⁰C). Al housing having diffused front Cover. Fixture must have IP20/IK02 protections & Suitable for working from 140V-270VAC. Similar to Make

Supply,Installation, Testing and Commisioining of Decorative Hanging Light of 30w to 40w W/W System Efficacy 1600lm/W. Designed for operations under diverse environment from 0⁰C to +45⁰C (Ta45⁰C). Al housing having diffused front Cover. Fixture must have IP20/IK02 protections & Suitable for working from 140V-270VAC. - (BASIC COST OF LIGHT @ Rs.10000.00)

Supply, Installation, Testing and Commisioining of Decorative Hanging Light of 30w to 40w W/W System Efficacy 1600lm/W. Designed for operations under diverse environment from 0⁰C to +45⁰C (Ta45⁰C). Al housing having diffused front Cover. Fixture must have IP20/IK02 protections & Suitable for working from 140V-270VAC. - (BASIC COST OF LIGHT @ Rs.25000.00)

Supply,Installation, Testing and Commisioining of Linear LED Strip-lights (15 Watt /Metre) with Aluminium profile & acrylic casing in False-ceiling Coves area with required driver etc. complete as per the direction in charge.

Supplying of LED Tube Light 40W Recess Linear Connect luminaire. Well designed extruded aluminium housing linear profile with efficacy perfect optic controls. Suitable for modern open office space with 55mm width.with all necessary fixing accessories, arrangements and etc.Cost include all removal of the existing fitting's and handover to the officer, hardwares, screws, clamps, lead, lift and etc

Supplying installation testing and commissioning of modular type Night lamp In GI box to be concealed on wall

Supply Installation Testing Commissioning of 6" dia Exhaust type Fan With all Accessories etc as required. (HEAVY DUTY)

Supply Installation Testing Commissioning of 18" dia Exhaust type Fan With all Accessories etc as required. (HEAVY DUTY)

Providing and fixing of 9"exhaust fan of approved make for ups and bathrooms to be fixed in grills or walls with all necessary fixing accessories,arrangements and etc. Cost include all hardwares, screws, clamps and etc.Fan make & model to be approved by engineer / architect. (Make of exhaust fan- Almonard.)

Supplying installation testing and commissioning of 450mm Dia Wall mounted fan and as per technical specification and as per latest IS / IEC.

Supply, installation, testing, and commissioning of a 26-inch, high-velocity, floor-mounted fan for industrial or commercial use. The fan speed shall not be less than 1440 RPM and as per technical specification and as per latest IS / IEC.

Supplying installation testing and commissioning of 26-inch / 660-mm sweep Industrial wall mounting fan suitable to operate at single-phase 230v A.C. supply. The fan speed shall not be less than 1440 RPM and as per technical specification and as per latest IS / IEC.

Supply, Installation, Testing and Commissioning of ceiling fan with Decorative, class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required

Supply, installation, testing and commissioning of 6 Mtr long Octagonal pole fabricated out of 76/ 60 mm (NB) dia. Pipe 6 metre long with, built in cylindrical control box and service door. The pole is coated with epoxy zinc phosphate primer and finished with polyurethane based paint The pole is suitable for mounting a wide range of luminaires with 76/ 60 mm spigot assembly. The control gear tray is prewired with MCB, terminal connectors for loop-in loop-out and suitable for operation on 240 V, 50 Hz single phase AC supply etc. complete as required.

Suppling Installation Testing & Commissioning of upto 200 WATT Flood light surface mounted downlight with options of LED efficacy more than140 lumens / watt - Poly carbonate IP65 LENS -60 degree angle as per technical specification and as per latest IS / IEC.

Suppling Installation Testing & Commissioning of upto 150WATT Flood light surface mounted downlight with options of LED efficacy more than140 lumens / watt - Poly carbonate IP65 LENS -60 degree angle as per technical specification and as per latest IS / IEC.

Supply,Fixing ,testing & commissioning of Circular/UFO type High Bay Lighting 200Watts light Fitting complete with fixing accessories and mounting bracket,earthing for the fittings all complete as required.(connection from the ceiling rose or junction box to light fixture with terminations).Note : The body meticulously craed from die-cast aluminum, enhanced by an annular lens design that collectively annular lense desgin an impressive IP65-rated tightness. CRI: ≥ 70 ATHD: <10% System Efficacy : Minium - 130 lm/w at temp - 0 to +45 Deg.C and Humidity 10 % to 90%,System Life Time ( Burning Hour With Driver ) : 50000 hrs @ L70 as per LM70 and testing as per LM-80,Driver Voltage : 220 -240 V,Power Factor : ≥0.9,efficiency : ≥85%, Surge Protection : (L-N) 1 kv E-L /N ) 2 KV, Cooling Temperature : 4000 K

Supply, Erection,Testing and Commissioning of 4mtr hight hot dipped galvaniszed octogonal pole with 100W LED light Fitting. The Pole shall have bottom 155mm A/F top 70mm A/F made up of 3mm thick HT sheet Steel plate along with 300 x 300 x 12 mm base plate and 1.5 mtr single arm bracket Suitable for above pole of ultimate strength 410 mpa IS 2713( part II )1986. Suitable for mounting 1 no of 50W LED Street Light Fitting including base plate and Concreate Foundation with M24 x 750mm long J type Foundation bolts( EN8grade). The Pole Should be Provided with 6 Amps SP MCB housed in Weather proof box DP 6 Amps MCB 4 way 30 Amps Rated terminal block for loop in and loop out cable arragnements, SMC box for Loop in and loop out including earth with 1 mtr long 25 mm dia B class GI pipe as Earth Electrode with charcoal, salt with 10 SWG GI Wire interconnected with street light Pole. Cable Entry & Exit in GI pipe of 2.5" Dia fitted in pole with clamps and as per drawing and technical specification

Supply and fixing of 150W LED Flood light fitting with LED (Lower end) with 2 metre 40mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply,erection,testing andc ommissioning of gate light IP65 luminaire of 70 WLED Gate light with highpressure diecast housing acting as heat sinkin or dertoensure better performance of the luminarie.With necessary GIbracket / MSwithpowder coatedbracket and all necessary fixing accessories

CABLE TRAY

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

450 mm width X 62.5 mm depth X 2.0 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

Farbrication, supplying, installation, testing & commissioning of weather proof box made out of hot moulded SMC sheet of size 285mm x 210mm x 117mm complete with 4 Nos. electrolytic aluminium busbar of 63 Amps. with porcelain base and suitable din bar including supplying and fixing one No. 16 A SPMCB complete with connections & inter-connections etc. as required

LT,1100V GRADE PVC / XLPE Armoured UnderGrounds Cables.

Supplying of LT under ground/Power XLPE cable having Aluminium conductor, extruded Flame retardant PVC outer sheathing steel wire/tape armoured & the inner sheath with polypropylene, suitable for 1100V class confirming to IS. The rate shall include a.Cable clamps on walls, columns, beams,built-up trenches,cable markers etc. for indoor cables.b.Covering bricks or tiles,cable markers etc for Outdoor cables. c.Earthing the glands armouring etc.,complete as required as per site conditions.

Supply and Laying of 3 x 4 sq.mm. PVC armoured LTUG Aluminium Cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4 x 6 sq.mm. PVC armoured LTUG Aluminium Cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG Aluminium Cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and fixing of brass cable gland for 4C x4 sqmm Copper cable XLPE armoured LTUG cable with earth connection.

Supply and fixing of brass cable gland for 4C x6 sqmm Copper cable XLPE armoured LTUG cable with earth connection.

Supply and providing cable end termination of 4 X 10 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.

Supply and providing cable end termination of 4c X 4 Sqmm PVC LTUG Copper armoured cable with necessary Copper cable sockets by crimping etc, with electrical connection complete.

Supply and providing cable end termination of 4c X 6 Sqmm PVC LTUG Copper armoured cable with necessary Copper cable sockets by crimping etc, with electrical connection complete.

Supply and providing cable end termination of 4c X 10 Sqmm PVC LTUG Copper armoured cable with necessary Copper cable sockets by crimping etc, with electrical connection complete.

Supply and Laying of 4c x 25 sq.mm.aluminium cable XLPE armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and fixing of brass cable gland for 4c x25 sqmm aluminium cable XLPE armoured LTUG cable with earth connection.

Supply and providing cable end termination of 4c X 25 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.

Supply and Laying of 4c x 35 sq.mm. Aluminium cable XLPE armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and fixing of brass cable gland for 4c x35 sqmm aluminium cable XLPE armoured LTUG cable with earth connection.

Supply and providing cable end termination of 4c X 35 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. - 3x2.5 sq.mm

Supply and fixing of brass cable gland for 3CX2.5sqmm Cu. armoured cable with necessary Copper cable sockets by crimping etc, with electrical connection complete.

Supply and providing cable end termination of 3CX2.5sqmm Cu. armoured cable with necessary Copper cable sockets by crimping etc, with electrical connection complete.

Supply and fixing of thermoplastic loop - in and loop out boxes with lid of dimension min 104X104X70MM with 20A connector. shorting link 2 way necessary and along DIN rail terminal block. The Junction Box shall be insulated and made out of high grade thermoplastic. The JB shall be IP Rated for outdoor applications, environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid& anti corrosive. The JB shall be rated for Degree of Ingress Protection IP 65 in accordance with IEC 60529.

NETWORK SYSTEM ( DATA & VOICE WORKS)

Supply and drawing of 4 Pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed PVC conduit as required and as per technical specification and as per latest IS / IEC

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and laying UTP CAT 6 (Systimax/CommScope) through the above PVC pipes / Raceways for data.

Supply and installation of RJ45 female jack (single plate).

Supply and installation of RJ45 female jack (double plate).

Supply and fixing 1 metre mounting cord (Systimax).

Supply and fixing 2 metre mounting cord (Systimax).

Supplying Installation and connecting of 24 port switch.

Supplying and installation of 24 port jack panel.

Supply and installation of 24U closed rack.

Termination and integration charges per set of nodes (Two ends) and testing, certification (Systimax) and documentation of all works.

Supply and installation of modular type single RJ-11 telephone socket housed in the manufacturers zinc passivated MS box with front plate.

Supply and installation of modular type dual RJ-11 telephone sockets housed in the manufacturers zinc passivated MS box with front plate.

Supply and installation of modular type RJ-45 box only housed in the manufacturers zinc passivated MS box

Supply and laying 30 pair krone connector housed in heavy duty ABS plastic mould with suitable locking arrangements.

Supplying and drawing following pair 0.5mm dia FRLS PVC insulated annealed copper conductor,unarmoured telephone cable in the existing surface /recessed steel/PVC conduit as required.

30 Pair cable

20 Pair cable

10 Pair cable

Supply and installation , Configuration and Testing of Wifi Access Point (POE enabled) (4X4) ,Mounting Brackets with necessary Required Job Etc.

Supply and installation , Configuration and Testing of Wired Router - Multi WAN router with URL based routing ,Mounting Brackets with necessary Required Job Etc. TP-Link archer mr200 (EU) 4G Router 2.4 GHz, 5 GHz 750 Mbps Wifi Speed Dual Band External Antenna MiFi (Sim Based), ...

Supply and installation , Configuration and Testing of Wireless Router (4X4) ,4X4 MU-MIMO Technology Wireless Smart Dual-Band Gigabit Wireless Router 5 GHz, 2.4 GHz 2100 Mbps Wifi Speed Dual Band External Antenna Ethernet Mounting Brackets with necessary Required Job Etc.

PUBLIC ADDRESS SYSTEM

Supplying, installation, testing & commissioning of 4 Zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.

Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. - speaker cable Four pair, 2-core, 1.5 sqmm

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)

Supplying, installation, testing & commissioning of heat detector operating at 542C/572C with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. - 4 Zone

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & ERLS outer sheath complete as required.

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. CO2 6kg& 4kg for EB room etc.Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Supply and fixing of stored pressure ABC (Mono AmmoniumPhospate)PowderTypeFireExtinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mountingbracket, safety clip etc., including conveyance, all incidental charges,neccessaryscaffolding andre-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers

Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU),surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU),copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature).

1.0 TR with 5 Star BEE Rating

1.5 TR with 5 Star BEE Rating

2.0 TR with 5 Star BEE Rating

Supply, Installation, Testing and Commissioning of Air Cooled Cassette type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), R- 32/R410A/R-407 Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, 50 Hz ,1 /3 phase AC supply, including surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5.5 Mtr (IDU to ODU), copper power and control cable upto 5.5 Mtr (IDU to ODU) including drain pipe, the system shall be capable of performing cooling, dehumidification, Air circulation, filtration & ventilation of following capacity with Scroll/rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB) as specified. The system shall be able to deliver 100% of the rated capacity as per relevant IS Code. The lab testing reports as per IS: 1391 shall be submitted from National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per International Electro technical Commission (IEC) 17025 standards / Central Power Research Institute (CPRI)/Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification and as per IS: 1391 as required.

2.0 TR with 5 Star BEE Rating

3.0 TR with 5 Star BEE Rating

4.0 TR with 5 Star BEE Rating

Supply and installation of 4 KVA capacity Double Booster Voltage Stabilizer with time delay relay (V-Gurad / Equivalent)

Supply and installation of 5 KVA capacity Double Booster Voltage Stabilizer with time delay relay (V-Gurad / Equivalent)

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit)

Supply and providing of pipeline nitrle rubber insulation for Refrigerant and drain pipe lines.

Supply and fixing of MS stand for fixing outdoor unit

Supply and fixing of water drain pipe line (1” PVC Pipe)

Supply and Providing of 3c x 2.5 sq.mm copper flexible cable laid in pvc conduit with neccssary works etc…

Supply and Providing of 4c x 2.5 sq.mm copper flexible cable laid in pvc conduit with neccssary works etc…

Supply and Providing of 4c x 4.0 sq.mm copper flexible cable laid in pvc conduit with neccssary works etc…

Providing and fixing of Air Curtain of size 4'x1'x1' having automated magnetic or mechanical sensor operation. Air curtain having MS sheet of 20 guage thickness, powder coated cream colour should have double blower type motor .5 HP, 1400 RPM, single phase of Make- CG/KIRLOSKAR/GEC. Aluminum material blower velocity 20-25 cum/hr with front grill fitted

PLUMBING BOQ

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc

15 mm nominal dia Pipes

20 mm nominal dia Pipes

25 mm nominal dia Pipes

32 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External Work

15 mm nominal dia Pipes

20 mm nominal dia Pipes

25 mm nominal dia Pipes

32 mm nominal dia Pipes

40 mm nominal dia Pipes

Providing and fixing white vitreous china floor-mounted pedestal wash basin of size approximately (20"x16"x 33" ht ) , of approved make and quality (Jaquar Model No. 35401N or equivalent), includingcutting and making good the walls wherever required:15 mm dia C.P. brass single hole basin mixer (Jaquar make or equivalent),32 mm C.P. brass waste coupling,32 mm dia C.P. brass bottle trap,15 mm C.P. brass angle valves for inlet connection,All required nuts, bolts, washers, and sealant,Cutting and making good walls and floors wherever required, Connecting to 15 mm dia C.P.V.C. inlet pipes and 32 mm waste outlet, Etc complete. Basi cost othe wash basin is Rs. 20000/ no

Providing, fixing, testing and commissioning of CP brass superior quality Towel ring with flange with concealed brass screws etc. including cutting & making good the wall etc.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern ofcapacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Jaquar VGS-WHT 81853S300UFRimless Single piece Water closet with U SOFT Basic cost of closet is RS. 18000/ no

Providing and fixing of CP health faucet , Hand operated spray unit (instant type) with CP Crutch and PVC flexible tube of 1.0m length. Jaquar ALD-CHR -573

Providing and fixing of 15mm dia CP brass Robe Hook with wall flange. MAKE : TOTO or kohler premium quality

Providing and fixing of 15mm dia CP brass Toilet Roll Holder with wall flange. Jaquar CAN-1151N or equivalent

Providing and fixing of shower assembly unit consisting of over headShower, arrangements with shower arm including cutting, chasing & making good the walls.

Providing and fixing of shower assembly unit consisting of HandShower, arrangements with shower arm including cutting, chasing & making good the walls. TOTO FT TBW02006A,Hand Shower 3 mode,with hanger and hose HSN: 39221000

Providing and fixing Concealed Body For S/L Diverter 40Mm Car, Single Lever Exposed Parts Kit Of Diverter and Hand Shower 100Mm Dia Round Shape Single Sliding rail 19mm and 600mm long round, Shower Arm casted 190mm long light body,O/Head shower singleflow 100mm dia,Flexible Tube 8mm dia and 1.5mt long including all material work completed. jaquar or equivalnt ,Single Lever Shower,Mixer with diverter, Concealed Box,

Supplying and fixing, soap dispenser with metalic bottle and necessary SS screws, etc complete Make : Jaquar AKP-CHR-35735P

Providing, fixing, testing and commissioning of CP brass superior quality Towel BAR with concealed brass screws etc. including cutting & making good the wall etc : Kohler 5630IN-CP Towel Bar or equivalent

Providing and fixing C.P. brass angle valve for basin mixer & geyserpoints of approved quality conforming to IS:8931 - 15mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standarddesign & of approved make conforming to IS:8931 - 15 mm nominal bore.

Supplying and fixing soap holder with metalic bottle and necessary SS screws, etc complete

Providing and fixing C.P. brass pillar / bib cock

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required. - Size 600x450x200 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the wallswherever required : Kitchen sink without drain board - 510x1040 mm bowl depth 225 mm

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge

Supplying, fixing, testing and commissioning of PVC Soil, waste and rain water pipes (SWR) conforming to IS:13592 /1990 -Type B fitting 6kg with rubber ring (conforming to IS : 5382) joints inclusive of all necessary specials like bends, tee, offsets, door bends, junctions, cowls etc., laid under floor /fixed on walls and in pipe shaft with proper pipe support like brackets, hangers, MS grip bolts etc., complete. The support shall be painted with two coats of enamel paint. - INTERNAL LINE

50 mm dia - Including wall chasing works

75 mm dia - Waste / balcony rain water

110 mm dia - Soil & Urinal

Supplying, fixing, testing and commissioning of PVC Soil, waste and rain water pipes (SWR) conforming to IS:13592 /1990 -Type B (4kg) fitting with rubber ring (conforming to IS : 5382) joints inclusive of all necessary specials like bends, tee, offsets, door bends, junctions, cowls etc., laid under floor /fixed on walls and in pipe shaft with proper pipe support like brackets, hangers, MS grip bolts etc., complete. The support shall be painted with two coats of enamel paint. - RAISERS LINE

75 mm dia - Waste / balcony rain water

110 mm dia - Soil waste

110 mm dia - Rain water

EXTERNAL SEWERAGE SYSTEM

75mm dia

110mm dia

160mm dia

Supplying & fixing in position 15 mm dia brass/ C.P screw down tape (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).(Sink&Garden)

Supplying & fixing in position C.I.Nahini trap /Floor trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ).

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. - 180x150 mm size P type - With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Manufacturing, Supplying & Installation of BIO TANK - 5KL with three partition Non electric sewage treatment plant designed for 50 users for commercial use gravity fl;ow multi stage tanks made of glass fibre reinforced polymer tank. An Anaerobic organic bio culture digester is used as per the prescribed doasage at periodic intervals. The output treated water suitable for surface disposal and COD, BOD and PH Value confirming to as per TNPCB norms. Treated water can be used for gardening/ irrigation/ water disposal purpose including all labour, materials, tools, etc., complete with an maintenance period of 12 months.

Supply and Installation of one RO 25 LPH commercial RO + UV water purifier Plant 25 Liter Per Hour Double Purification Blue Stainless steel Full Automatic With TDS Adjuster Reverse Osmosis (RO) plant is a water purification system designed to produce 25 liters of purified water per hour with Necessary works required etc with an maintenance period of 12 months…

Supply and Installation of AQUAULTRA Pro-B 9 Liter RO+UV+UF+Active copper Water Purifier with Intelligent Disinfection UV LED in food grade storage Tank with Necessary works required etc with an maintenance period of 12 months…

PLUMBING FIXTURE, HEAT PUMPS, SHOWER ENCLOSURE

Providing & fixing of Wall to wall shower enclosure with one fixed glass and one sliding door - 2 part with 8mm thk toughned glass and with profile made of Chrome plated aluminium with mirror finish knob. The door should be of magnetics door closing for water tight solutions. - Jaquar Shower Enclosure - Sliding Range - OPTIMA Size - 1850mm X 2000mm (Code:JSE-CH R-OPTSD R1850SX) - Basic Rate - Rs.26650

Providing & fixing of Wall to wall shower enclosure with one fixed glass and one sliding door - 2 part with 8mm thk toughned glass and with profile made of Chrome plated aluminium with mirror finish knob. The door should be of magnetics door closing for water tight solutions. - Jaquar Shower Enclosure - Sliding Range - OPTIMA Size - 1700mm X 2000mm (Code:JSE-CH R-OPTSD R1700SX) - Basic Rate - Rs.26650

Providing & fixing of Wall to wall shower enclosure with one fixed glass and one sliding door - 2 part with 8mm thk toughned glass and with profile made of Chrome plated aluminium with mirror finish knob. The door should be of magnetics door closing for water tight solutions. - Jaquar Shower Enclosure - Sliding Range - OPTIMA Size - 1850mm X 2000mm (Code:JSE-CH R-OPTSD R1500SX) - Basic Rate - Rs.24200

Providing & fixing of 4 Function ceiling mounted Rain Shower - Rainjoy+ Shower 500X500mm AISI 304 stainless steel in polished finish with RGB LED lights remote control & with installation kit for false ceiling- Chromo therapy (RGB): LED x 0.23W with 12V Power Supply (SMPS) Including Controller, connecting to AC 100-240V, 50-60Hz- 4-functions (Rain, Intense, Bold Massage & 4 Mist Functions) with an maintenance period of 12 months - Jaquar Artize (Code: OSA-CHR-70021) Basic Rate - Rs.237800

Providing & fixing of Thermatik-S in-wall thermostatic shower valve with 5-way diverterwith an maintenance period of 12 months. - Jaquar Artize (Code: THK-CHR-697N) Basic Rate - Rs.34850

Providing & fixing of Signac Bath Spout with Diverter & Wall Flange with an maintenance period of 12 months - Jaquar Artize (Code: SPT-CHR-41463) Basic Rate - Rs.7800

Providing & fixing of RAINBEAM HAND SHOWER Ø23 X 231 X 10H MM with an maintenance period of 12 months. - Jaquar Artize (Code: HSA- CH R-51117 47) Basic Rate - Rs.6000

Providing & fixing of Wall Outlet with Shower Hook - Chrome Flange Faucet (Wall Mount Installation Type) - Jaquar Artize (Code: SHA-CH R-566R) Basic Rate - Rs.780

Providing & fixing of Flexible Tube 8mm dia. & 1.5M Long with Nuts for premium hand shower connection. - Jaquar Artize (Code:SAA- CH R- 50754 9D8) Basic Rate - Rs.920

Providing & fixing of Soap Dispenser with Glass bottle. - Jaquar Kubixs (Code:AKP-CH R-35735 P) Basic Rate - Rs.1500

Providing & fixing of Concealed Body for Single Lever High Flow Diverter with Button Assembly, But without Exposed Parts. - Jaquar (Code:ALD-CH R-079N) - Basic Rate - Rs.3100

Providing & fixing of Single Lever Exposed Parts Kit of Hi-flow Diverter Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve & Button (Compatible with ALD-079N). - Jaquar (Code:KUP-CHR-35079 NKPM) - Basic Rate - Rs.1900

Providing & fixing of Integra-X Split Heat Pump 400 LTR with an maintenance period of 12 months. - Jaquar (Code:HPS-WH T-400X) -Basic Rate - Rs.213200

Providing & fixing of Circulation Pump with an maintenance period of 12 months. - Jaquar - Basic Rate - Rs.15580

Providing and Fixing GI gratting in suitable size for drians and whereever required including cutting the necessary pockets and finishing on firm conditions including labour, materials, tools, etc., complete all as directed by Engineer Incharge

SWIMMING POOL WORKS

Construction of Swimming Pool at the specified location as per the direction of KPL incharge of size: 16.00 M (Length) x 11.61 M (Width) X 1.35M (Depth) with a raised kids pool of 3 M (Length) X 4 M (Width) x 0.75 (Depth) within the same as per the approved drawing. (Basic cost of Swimming pool inclusive of all works - Rs. 40,00,000) - MAKE from “Desjoyaux”. Note 1. Civil works like Excavation work including dewatering, PCC work, Panel assembly and laying work, RCC concrete work of M20 Grade combined with Sturdy polypropylene, smooth plastering inclusive of all material & labour following the necessary standards. 2. The edge of the pool should be fixed with Coping stone all around with grinding & polishing etc all complete as per the drawings. 3. The Pool should have a Vinyl Liner which is a membrane collection made of 2 layers of premium PVC film reinforced with a woven polyester mesh. The Vinyl Pool liner should have a Anti- slip, Anti- Fungal properties and also a protective coating from Stain & UV. The joints should be of fusion welded joints. 4. The Pool should have 2nos. of Filtration pumps of 0.5 HP capacity each and The pump should filter upto 15 to 6 Microns 5. 2 Nos. of powerful lights of 200 watts within the Filtration pumps. 6. The pump should have 2nos. Of Electrical control Panel. 7.The package should have a Starter kit (H2O test kit, Broom Head, Extendable broom Handle, Broom hose of 15 Mtrs, Wall Brush, Floor Net, Lotus Thermometer & Vacuum Head with Wheel) and Chemicals like Shock & Slow chlorine 8. Extras Accessories - 3 step ladder 9.Extras Accessories - Kids Pool Hand rails.

KITCHEN EQUIPMENTS & VENTILATION SYSTEM WORKS

Supply, Installation, commissioning and handover including services of Defect liability period as per contract for all the below Kitchen equipments and Exhaust ventilation system as per the consultant drawings attached. These work should be completed in coordination with necessary required electrical & plumbing works. The counter should be made of SS 304 Grade and of sheet thickness in Standard wire gauge as mentioned in the specifications:

Providing, installing and commissioning of stainless steel Working Counter With 2nos. Of Under shelf made In 304 Grade of 20 Swg Sheet thickness all complete as per the direction of the site engineer. [Size: L30xd30xh34+6] - Basic Cost - Rs.18000/-

Providing, installing and commissioning of stainless steel Tandoori Clay Pot (Gasline Model) Made In 304 Grade 20 Swg Sheet thickness With Wheel [Size:L30xd30xh34+6] -Basic Cost - Rs.31500/-

Providing, installing and commissioning of stainless steel Dish Wash Single Sink Made In 304 Grade 18 Swg Sheet thickness With Legs [Size:L24xd30xh30+10] Basic Cost - Rs.11500/-

Providing, installing and commissioning of stainless steel 4 In 1 Low Pressure Conti Ranger Made In 304 Grade 18 Swg Sheet thickness With Legs[Size: L30xd30xh34+6] -Basic Cost - Rs.29000/-

Providing, installing and commissioning of stainless steel 3 In 1 Chineese Cum Indian Ranger Made In 304 Grade 18 Swg Sheet thickness With Legs [Size:L66xd30xh34+6] -Basic Cost - Rs.38500/-

Providing, installing and commissioning of stainless steel Chicken Griller [9 Bird's] -Basic Cost - Rs.23000/-

Providing, installing and commissioning of Dough Kneading Machine [15Kg Cap] (Heavy) [1HP] Ponmani Motor -Basic Cost - Rs.45350/-

Providing, installing and commissioning of stainless steel Triple Sink With Chute Made In 304 Grade 18 Swg Sheet thickness With Legs [Size:L84xd24xh34+6] -Basic Cost - Rs.27000/-

Providing, installing and commissioning of stainless steel Exhaust Hood With Filters Made In 304 Grade 0.8mm Sheet [Size:L27 FeetxD3FeetXh20 Inches] -Basic Cost - Rs.178200/-

Providing, installing and commissioning of G.I Ducting Work For Exhaust Line & Fresh air line.

Providing, installing and commissioning of MS Blower With 3hp 3 Phase Crompton Motor -Basic Cost - Rs.58000/-

Providing, installing and commissioning of 3 Phase L & T Stater.

Providing, installing and commissioning of MS Wall Mounted Stand Made In 30x6mm “L” Angle 3mm Sheet With Base -Basic Cost - Rs.12000/-

Providing, installing and commissioning of Aluminium Grill With Coated Adjustable Mouth.

Providing, installing and commissioning of MS Wall Mounted Axial Blower With 2hp 3 Phase Crompton Motor

Providing, installing and commissioning of stainless steel Trench With Grating Made In 304 Grade 25mm 16 Swg Sqr Pipe For Removable Grating And 32mmx3mm Angle trench Fixed

Providing, installing and commissioning of stainless steel Seamless “C” Class Scheduled 13 Jindal 304 Grade1 Pipe 12mmx3mm With 4 Way Manfold For Centralized Gasline Pipe Work-Approx.

Anand Shree Infra Reality Pvt. Ltd (BID ID -3310926)

FELICET INFRA PVT LTD (BID ID -3310105)