REPAIR TO FLOORING TILING PLUMBING SANITARY FITTING AND JOINERY TO CERTAIN BUILDING AT RASHI AREA COLABA UNDER AGE BRII UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Material & Labour Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material & Labour non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

Material & Labour Coloured glazed ceramic tiles 300mm x 450mm x 6 to 7mm thick on vertical surfaces set & jointed in neat cement paste and pointed in white cement mixed with pigment over 12mm thick rendering as in backing coat in CM 1:4 all as specified and as directed.

Material & Labour non-skid coloured Ceramic tiles 400x400x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

Supply & Fixing in repair Plastic water closet seat cover, white/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminisied hinges devices complete all as specified and directed.

Supply & Fixing in repairs vitreous china wash basin white flat back 550 x 400mm , with fitting of PTMT waste coupling suitable size incl angle iron brackets with painting of brackets etc complete all as specified and directed .

Supply & Fixing in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Supply & Fixing in repair Stop valves, cast copper alloy high pressure 15mm bore ISI marked with cruch or butterfly handles screwed down both side for iron pipes complete as specified and directed

Supply & Fixing 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs complete as specified and directed

Supply & Fixing in repair 10litre capacity PVC valveless, syphonic action type, flushing cristern, low level, white, with inlet, ball valve, float and handle including brackets all complete as specified and as directed.

Supply & Fixing PVC connection 15mm size with PTMT nuts of length 450mm in repairs complete as specified and directed

Supply and fix in repairs PVC corrugated waste pipe 32mm dia bore 800mm length long with couplings etc complete as specified and directed

Supply & Fixing in repairs Bib taps, 15mm dia cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete as specified and directed

Supply & Fixing in repairs High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 fixed complete to wall, floors for drain out the waste water in Kitchen Sink/wash basin complete all as specified and directed.

Supply & Fixing Flush pipe of polyethylene of low or high density for low level cistern complete as specified and directed

Supply & Fixing stainless steel tubular towel rail 20mm dia D type 60cm long between flanges all complete as directed.

Supply & Fixing in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified supplied and fixed in repairs complete as specified and directed

S& F in repair vitreous china wash down water closet padestal pattern (Anglo-Indian type) white (excluding fixing bolts, flushing cistren and flush pipe) with 'P' or 'S' trap complete all as specified supplied and fixed in repairs complete as specified and directed

Taking down cement plaster of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water and removing rubbish off the premises complete all as specified and directed .

Material & Labour for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete as specified and directed

Prepration of new plastered surfaces of walls, pillars, cornices and applying two coat oil bound distemper over a coat of primer including prepration of surface complete as specified and directed

Supply & Fixing in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)or aluminium wire staples and removing old beading, complete all as specified and directed

Supply & Fixing 150 mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed.

Supply & Fixing 100 mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed.

Supply & Fixing 150mm aluminium anodised barrel tower bolts of extruded section fixed in repairs complete all as specified and directed.

Supply & Fixing 100mm aluminium anodised barrel tower bolts of extruded section fixed in repairs complete all as specified and directed.

Supply & Fixing in repairs 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

Supply & Fixing in repairs 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.

Supply & Fixing in repairs hasp and staple safety type,mild steel, wire type, stove enamelled black including bolt to hinge plate and fixed with screws 125mm size complete all as specified and directed.

Material & Labour for CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead fixed in cement concrete type B 1 (1:2:4) all as specified and directed..

Supply & Fixing PTMT grating doom over Nahani trap and floor trap of 100mm Dia all as specified and directed.

Supply & Fixing in repair magic eye fancy type of brass for door including drilling cutting of holes and making good all complete as directed by Engr-in-Charge all as specified and directed..

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each all as specified and directed all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) but exc 1.5 sqm but n exc 4 sqm each all as specified and directed

Supply & Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site as per specification & direction.

Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & direction.

Material & Labour machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium slding window 18 to 20 mm thick over 20 mm thick screed bed in cement mortar 1:3 complete all as specified.

Material & Labour machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over 15 mm thick rendering in CM 1:3 complete all as specified and directed.

Supply & Fixing powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note: Minimum 25 micron anodisation for all aluminium sections)

Material & Labour powder coated aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (80x66mm aperature) complete all as specified and directed

Supply & Fixing 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed

Supply & Fixing 4mm thick frosted sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed

Supply & Fixing Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter aluminium wire staples complete all as specified and directed.

Supply & Fixing in repairs aluminium serrated finish 20mm dia curtain rod of approved pattern and shade with all fittings as per site requirement such as end block, rounded block, brackets, CP screws, rovel plug, etc. complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

Supply & Fixing 35 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed

Supply & Fixing 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

Supply & Fixing 25mm thick block board, grade-1 quality exterior grade commercial type fixed with screws to timber frame work of width n.exc. 25 cm in shelves or built-in cupbords, almirahs and similar work with lipping patti all complet as directed.

Supply & Fixing 100 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed.

Supply & Fixing 100mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Supply & Fixing 75mm stailess steel medium weight butt hinges complete all as specified and directed.

Supply & Fixing 150 mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed.

Supply & Fixing 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Supply & Fixing 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply & Fixing 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge all as specified and directed.

Supply & Fixing hasp and staple safety type,mild steel, wire type, stove enamelled black including bolt to hinge plate and fixed with screws 125mm size complete all as specified and directed.

Supply & Fixing 100mm size stainless steel medium weight butt hinges all as specified and directed.

Material & Labour for two coat synthetic enamel paint over a coat red pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar

Material & Labour Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 20mm thick screed bed or beddingin cement mortar 1:4 etc complete all as directed .

Material & Labour 18 to 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over 12mm thick rendering as in backing coat in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Demoliton of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge

Material & Labour 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in subbase to floors all as specified and directed.

Material & Labour for sand cushioning under interlocking paver blocks watering and compact complete all as specified & directed .

Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed

Material & Labour for 20 mm thick screed bed or beding layer for laying floor finishes in CM 1:6 complete all as specified and directed

Material & Labour for prepolished coloured chequerd floor tiles of size 300x300x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed. Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately)

Material & Labour machine cut Kota stone ( greenish colour, pre mirror polished) flooring 20-25mm thick over over 20 mm thick screed bed in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified.

Material & Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as coping,road side interlocking ,stops including necessary formwork complete all as specified and directed.

Supply & Fixing Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wasters, including bedding in cement mortar to dwarf walll or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460 mm bowl size 410mm x 330 mm x 160mm complete all as specifice and directed.

Supply & Fixing in repair fancy type cromium plated stop valves of 15mm bore, with cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed cmplete all as specified and directed.

Supply & Fixing in repair 15mm bore dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed cmplete all as specified and directed.

Supply & Fixing in repair health faucet (ABS Body) milt steel chromium plated suitable for 15 dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position compete all as specified and directed.

Supply & Fixing in repair fancy type cromium plated bib taps of 15mm bore, with cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed cmplete all as specified and directed.

Dismantling of MS grill/grating of any description and position etc. complete all as specified and directed.

Supply & Fixing framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165 complete all as specified and directed.

Material & Labour for praparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide all as specified and as directed.

Material & Labour for Virified Ceramic tiles light shade 10 mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or beddingin cement mortar 1:4 etc complete all as directed .

Taking up or down GI tubing 15mm bore and connections all as directed.

Supply & Fixing tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

satguruenterprises

RAMESH ENTERPRISES

SHREE JAGDISH FURNITURE CO.

M/s. MAYUR ENTERPRISES

ASHOK CONSTRUCTION

BOB ENTERPRISES

Shetty Construction Co

RAVINDRA SALES