Talab churaye se thana kotwali ke samne tak or mahila thana ke samne alighar road phothpat or post office karyalay se C.M.O karyalay tak CC interlocking nirmad kary.

Dismantling of B.O.E soling/Inter locking tiles Including Stacking of serviceable material and disposal of unserviceable materials within a lead of 50m as per direction of EI/C (Labour only) S.I.No. 19 new

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30 mtr. distance as directed by the Engineer-in-Charge. S.I.No.253

M-100 Brick work in 1:4 (One cement & Four Coarse sand) mortar i/c all material labour T&P etc. complete. DSR Sp No. 6.1.1 Ch. 6

Providing and laying cement concrete in 4:2:1 of not less than strength of M-15 stone Ballast (20mm nominal size) approved coarse sand and cement, curing complete, including cost of form work. In Foundation and floors. S.I.No. 279 Page No. 28

12mm thick Plaster in 1:4 (One cement & four coarse sand sand) mortar i/c all material labour T&P etc. complete.S.I.No. 584 Ch. 13

Construction of gravel/soil aggregate base by providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel 80-100 KN static roller to achieve the desired density, complete as per Technical Specification Clause 402

WBM Grading -3 -Providing laying , spreding and compacting stone aggregate of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness ,hand packing . Rolling with smooth whell roller 80-100 kn in stage to proper grade and camber ,applying and brooming ,stone screening to fill up the interstices of coarse aggregate ,watering and compacting to required density as per technical specification Clause 405.

Providing and laying Interlocking C.C. Tiles 100mm thick of approved quality over 25mm thick local sand. (Rubber Moulded) S.I.No. 11 Page No. 71

Road marking with Hot applied thermoplastic compond with reflectoristising Glass beads on bituminous surface .Providing and laying of hot applid thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gms per Sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35-2015 the finished surface to be level, Uniform and free from streaks and holes .MORTH 803 PWS. SOR SI NO 2

Disposal of old tiles from site

P/F of inaguration signboard with brick work and Plaster in 1:4 Cement mortar with black granite stone including engraving of proper language all complete

Please Enable Macros to View BoQ information