Energization of 1 No. borewell at Salpat Colony near house of Devi Singh in G.P. Udaipur Distt. Lahaul Spiti HP

Providing and supplying of Submersible pump set (water filled) of satandard make such as Kirloskar/ KSB/Crompton/Sabar/BS/Angel/Falkon, conforming to IS:8034-1976 with up to date ammendments. The pump set should be suitable for operation on 240 +/- 10% volts, Single phase AC supply. The power of motor should be atleast (+) 10% in excess of maximum power required by the pump in the operation range of (+) 10% and (-) 25% of the duty point head. The pump set shall be capable of working in dry condition and it should include the cost of bearing nut & bolts etc. complete and should meet the following data :- Total Head : 56 Mtrs. Discharge : 0.80 LPS

Providing and fixing of starter (Direct on line) with timing controler circuit (timer) for above mensioned pump set of standard make such as L&T/MEI/Havels/AVON/Crompton/Asian with suitable capacity, installed on a MS Sheet box of size 0.60x0.30x0.90m capable of mounting a voltmeter 0 to 300 volts capacity and ampare meter of capacity 0-25 ampare of standard make complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing of water proof PVC insulated/PVC sheathed industrial flat copper cable 3 core, 2.5 mm² as per IS:674 Part-II-1964 suitable for above pump set from starter to pump set subject to approval of HPSEBL complete as per direction and to the antire satiafaction of the Engineer-in- charge in all lead and lifts.

40 mm dia (PN-16)

Providing and fixing of 40mm dia 3 layer PP-R (Polypropylene random copolymer) male threaded adaptor with in all leads and lifts complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing of 40mm dia 3 layer PP-R (Polypropylene random copolymer) plain elbow 90° with in all leads and lifts complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing of 40mm dia 3 layer PP-R (Polypropylene random copolymer) plain union with in all leads and lifts complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing of steel wire rope 6mm thick for holding the column assembly and pump set in borewell to avoid falling of assembly and pump set in bore well including complete arrangement of fastening etc. complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction and to the entire satisfaction of Engineer-in-Charge.