Establishing Slender loris conservation center at Sukkampatty village of Ayyalur Range in Dindigul Forest Division, Dindigul

Amount

ENTRANCE ARCH

Clearing scrub jungle growth

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Filling with Gravel complying with standard specification for filling in foundation and basement

Anti- termite treatment

Supplying and Filling with (Stone Sand) - M-Sand 15mm tk

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Reinforcement Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification . The binding wire will be supplied by the contractor as per clause MOST specification.

Brick Work in Cement Mortar 1:5 using country bricks of size 8 3/4"x 4 1/4" x 2 3/4" including cost and conveyance of all materials at site ,labour charges, curing, etc.., complete and as directed by the department officers

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Preparing surface and plastering with cement mortar 1:5 (1cement, 5 sand) 12mm thick to walls finished smooth including GI Chicken mesh of 20 gauge as approved shall used over junction of concrete and masonry wall about 150mm wide fixed with nail, the rate to be including debris cleaning and finishing in all respects , all material and labour Charges , Wastage and all Taxes , Materials lead and lift , necessary scaffoldings, staging's, curing, finishing necessary scaffolding, curing, clearing of mortar debris away from the Site etc complete in all floors.

Special ceiling Plastering in cement Mortar 1:3-10 mm thick for RCC exposed surfaces such as RCC slaps sun shade including cost and conveyance of all materials at site labour charges curing etc…, complete

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet Black with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Providing and fixing of approved wall cladding and make.

Providing and applying two coats of external emulsion paint approved colur and make ( ASIAN, BERGER, NEROLAC, ICI or equivalent) for walls over the two coats of putty and one coat of primer, including surface preparation, scaffolding wherever required, watering, curing, cleaning, covering the floors. Paint to be applied as per manufacturer's specification, etc, complete. All complete as per detail drawings and specifications.

Supplying and fixing of India Gypsum board with WPC Panels, aluminium framing of necessary intervals with putty, primer, painting along with the necessary coves and allowing all the light fixtures, fan, etc, complete.

Supplying and Installing Metal False Ceiling using Fire Retardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated on external surface and shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre 'T'. The 'T' shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of 'T' section of size 30mm x 24mm powder coated at bottom at intervals with powder coating at bottom. Necessary provision of inter locking of 'T' section are made at required intervals not exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed to the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be placed at the side wall using edge profile 'L' Angle of size 20mm x 20mm and fixed to the side wall the false ceiling should be fixed of same level and should present a neat look

PVC Panelled door/Window Shutters Hollow Type - 200mm x 20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using MS Angle / Flat including cost of necessary aluminium hinges and other furniture fittings

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm with T.W switch box with 3mm thick hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point -SD 38

Wiring with 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm T.W switch box with 3mm thick hylum sheet for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Power plug point -SD 40

Supplying and fixing of mild steel work for elevation purpose Entrance Gate/ Boom Barrier (As per Design)

Fabrication of Glass Fibre Reinforced Concretre live scale statue modules for fabrication of slender loris live scale moduls

INTERACTIVE CENTER Clearing scrub jungle growth

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Filling with Gravel complying with standard specification for filling in foundation and basement

Anti- termite treatment

Supplying and Filling with (Stone Sand) - M-Sand 15mm tk

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Reinforcement Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification . The binding wire will be supplied by the contractor as per clause MOST specification.

Supplying and fixing of mild steel work for elevation purpose and complete.

Brick Work in Cement Mortar 1:5 using country bricks of size 8 3/4"x 4 1/4" x 2 3/4" including cost and conveyance of all materials at site ,labour charges, curing, etc.., complete and as directed by the department officers

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Preparing surface and plastering with cement mortar 1:5 (1cement, 5 sand) 12mm thick to walls finished smooth including GI Chicken mesh of 20 gauge as approved shall used over junction of concrete and masonry wall about 150mm wide fixed with nail, the rate to be including debris cleaning and finishing in all respects , all material and labour Charges , Wastage and all Taxes , Materials lead and lift , necessary scaffoldings, staging's, curing, finishing necessary scaffolding, curing, clearing of mortar debris away from the Site etc complete in all floors.

Special ceiling Plastering in cement Mortar 1:3-10 mm thick for RCC exposed surfaces such as RCC slaps sun shade including cost and conveyance of all materials at site labour charges curing etc…, complete

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet Black with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Providing and fixing of approved wall cladding and make.

Providing and applying two coats of external emulsion paint approved colur and make ( ASIAN, BERGER, NEROLAC, ICI or equivalent) for walls over the two coats of putty and one coat of primer, including surface preparation, scaffolding wherever required, watering, curing, cleaning, covering the floors. Paint to be applied as per manufacturer's specification, etc, complete. All complete as per detail drawings and specifications.

Supplying and fixing of India Gypsum board with WPC Panels, aluminium framing of necessary intervals with putty, primer, painting along with the necessary coves and allowing all the light fixtures, fan, etc, complete.

PVC Panelled door Shutters Hollow Type - 200mm x 20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using MS Angle / Flat including cost of necessary aluminium hinges and other furniture fittings

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm with T.W switch box with 3mm thick hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point -SD 38

Wiring with 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm T.W switch box with 3mm thick hylum sheet for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Power plug point -SD 40

RECREATION CENTER Clearing scrub jungle growth

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Filling with Gravel complying with standard specification for filling in foundation and basement

Anti- termite treatment

Supplying and Filling with (Stone Sand) - M-Sand 15mm tk

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Reinforcement Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification . The binding wire will be supplied by the contractor as per clause MOST specification.

Brick Work in Cement Mortar 1:5 using country bricks of size 8 3/4"x 4 1/4" x 2 3/4" including cost and conveyance of all materials at site ,labour charges, curing, etc.., complete and as directed by the department officers

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Preparing surface and plastering with cement mortar 1:5 (1cement, 5 sand) 12mm thick to walls finished smooth including GI Chicken mesh of 20 gauge as approved shall used over junction of concrete and masonry wall about 150mm wide fixed with nail, the rate to be including debris cleaning and finishing in all respects , all material and labour Charges , Wastage and all Taxes , Materials lead and lift , necessary scaffoldings, staging's, curing, finishing necessary scaffolding, curing, clearing of mortar debris away from the Site etc complete in all floors.

Special ceiling Plastering in cement Mortar 1:3-10 mm thick for RCC exposed surfaces such as RCC slaps sun shade including cost and conveyance of all materials at site labour charges curing etc…, complete

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet Black with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Siupplying and fixing of approved teracotta wall cladding tiles of approved make size not less then 9" X3" with minimum of 9mm tk with nessery growting waxing ect,,..

Providing and applying two coats of external emulsion paint approved colur and make ( ASIAN, BERGER, NEROLAC, ICI or equivalent) for walls over the two coats of putty and one coat of primer, including surface preparation, scaffolding wherever required, watering, curing, cleaning, covering the floors. Paint to be applied as per manufacturer's specification, etc, complete. All complete as per detail drawings and specifications.

Supplying and fixing of India Gypsum board with WPC Panels, aluminium framing of necessary intervals with putty, primer, painting along with the necessary coves and allowing all the light fixtures, fan, etc, complete.

PVC Panelled door Shutters Hollow Type - 200mm x 20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using MS Angle / Flat including cost of necessary aluminium hinges and other furniture fittings

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm with T.W switch box with 3mm thick hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point -SD 38

Wiring with 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm T.W switch box with 3mm thick hylum sheet for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Power plug point -SD 40

CONSERVATION CENTRE & NIGHT STUDIO WITH SOUVENIR SHOP Clearing scrub jungle growth

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Filling with Gravel complying with standard specification for filling in foundation and basement

Anti- termite treatment

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Reinforcement Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification . The binding wire will be supplied by the contractor as per clause MOST specification.

Brick Work in Cement Mortar 1:5 using country bricks of size 8 3/4"x 4 1/4" x 2 3/4" including cost and conveyance of all materials at site ,labour charges, curing, etc.., complete and as directed by the department officers

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Preparing surface and plastering with cement mortar 1:5 (1cement, 5 sand) 12mm thick to walls finished smooth including GI Chicken mesh of 20 gauge as approved shall used over junction of concrete and masonry wall about 150mm wide fixed with nail, the rate to be including debris cleaning and finishing in all respects , all material and labour Charges , Wastage and all Taxes , Materials lead and lift , necessary scaffoldings, staging's, curing, finishing necessary scaffolding, curing, clearing of mortar debris away from the Site etc complete in all floors.

Special ceiling Plastering in cement Mortar 1:3-10 mm thick for RCC exposed surfaces such as RCC slaps sun shade including cost and conveyance of all materials at site labour charges curing etc…, complete

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet Black with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Flooring with CEMENT BASED ANTI SKID TILES (EUROCAN) of size 430x387x25mm of approved quality and colour in all floors over 20mm thick cement mortar 1:3 base above the existing bed concrete and pointing with same colour cement added with colouring pigment including curing cutting etc.., complete

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Siupplying and fixing of approved teracotta wall cladding tiles of approved make size not less then 9" X3" with minimum of 9mm tk with nessery growting waxing ect,,..

Providing and applying two coats of external emulsion paint approved colur and make ( ASIAN, BERGER, NEROLAC, ICI or equivalent) for walls over the two coats of putty and one coat of primer, including surface preparation, scaffolding wherever required, watering, curing, cleaning, covering the floors. Paint to be applied as per manufacturer's specification, etc, complete. All complete as per detail drawings and specifications.

Supplying and fixing of India Gypsum board with WPC Panels, aluminium framing of necessary intervals with putty, primer, painting along with the necessary coves and allowing all the light fixtures, fan, etc, complete.

PVC Panelled door Shutters Hollow Type - 200mm x 20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using MS Angle / Flat including cost of necessary aluminium hinges and other furniture fittings

Supplying and fixing in position of of colour glazed european WATER CLOSET with "P" or "S" strap and double flapped seat cover ,12.50 litre capacity PVC loe level FLUSHING TANK including all internal fittings fixed on C.I. Brackets, 12 mm PVC or brass nipple, chromium plated brown headed stopcock, 12 mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling the masonry and re-doing the same to the original condition

Supplying and fixing in position Indian make Wash Hand Basin of size 550 x 400mm of approved quality

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by theDepartment officer.

Supplying and fixing of Urinal for standerd size of aproved by department officer

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm with T.W switch box with 3mm thick hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point -SD 38

Wiring with 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm T.W switch box with 3mm thick hylum sheet for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Power plug point -SD 40

Providing, supplying & laying of Chlorinated Poly Vinyl Chloride (CPVC-SDR-13.5) Pipes conforming to IS 15778 having thermal stability cold water with brass and CPVC fittings like Elbow, Brass Tee, Brass Elbow, Offsets, Tee with clamps @1.00 meters spacing, with jointing of pipes with one step CPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, Exposed work including chase cutting, bracket fixing)complete complying with standard specification and as directed by the Departmental Officer. CPVC 20mm Dia Pipe

Providing, supplying & laying of Chlorinated Poly Vinyl Chloride (CPVC-SDR-13.5) Pipes conforming to IS 15778 having thermal stability cold water with brass and CPVC fittings like Elbow, Brass Tee, Brass Elbow, Offsets, Tee with clamps @1.00 meters spacing, with jointing of pipes with one step CPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, Exposed work including chase cutting, bracket fixing)complete complying with standard specification and as directed by the Departmental Officer.CPVC 25mm Dia Pipe

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Director/Addl Director/Deputy Director before use on works). a) Supplying and Fixing 75mm dia

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Director/Addl Director/Deputy Director before use on works). b) Supplying and Fixing 110mm dia

TOILET BLOCK Clearing scrub jungle growth

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Filling with Gravel complying with standard specification for filling in foundation and basement

Anti- termite treatment

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Reinforcement Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification . The binding wire will be supplied by the contractor as per clause MOST specification.

Brick Work in Cement Mortar 1:5 using country bricks of size 8 3/4"x 4 1/4" x 2 3/4" including cost and conveyance of all materials at site ,labour charges, curing, etc.., complete and as directed by the department officers

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Preparing surface and plastering with cement mortar 1:5 (1cement, 5 sand) 12mm thick to walls finished smooth including GI Chicken mesh of 20 gauge as approved shall used over junction of concrete and masonry wall about 150mm wide fixed with nail, the rate to be including debris cleaning and finishing in all respects , all material and labour Charges , Wastage and all Taxes , Materials lead and lift , necessary scaffoldings, staging's, curing, finishing necessary scaffolding, curing, clearing of mortar debris away from the Site etc complete in all floors.

Special ceiling Plastering in cement Mortar 1:3-10 mm thick for RCC exposed surfaces such as RCC slaps sun shade including cost and conveyance of all materials at site labour charges curing etc…, complete

Flooring with CEMENT BASED ANTI SKID TILES (EUROCAN) of size 430x387x25mm of approved quality and colour in all floors over 20mm thick cement mortar 1:3 base above the existing bed concrete and pointing with same colour cement added with colouring pigment including curing cutting etc.., complete

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Siupplying and fixing of approved teracotta wall cladding tiles of approved make size not less then 9" X3" with minimum of 9mm tk with nessery growting waxing ect,,..

Providing and applying two coats of external emulsion paint approved colur and make ( ASIAN, BERGER, NEROLAC, ICI or equivalent) for walls over the two coats of putty and one coat of primer, including surface preparation, scaffolding wherever required, watering, curing, cleaning, covering the floors. Paint to be applied as per manufacturer's specification, etc, complete. All complete as per detail drawings and specifications.

Supplying and fixing of India Gypsum board with WPC Panels, aluminium framing of necessary intervals with putty, primer, painting along with the necessary coves and allowing all the light fixtures, fan, etc, complete.

PVC Panelled door Shutters Hollow Type - 200mm x 20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using MS Angle / Flat including cost of necessary aluminium hinges and other furniture fittings

Supplying and fixing in position of of colour glazed european WATER CLOSET with "P" or "S" strap and double flapped seat cover ,12.50 litre capacity PVC loe level FLUSHING TANK including all internal fittings fixed on C.I. Brackets, 12 mm PVC or brass nipple, chromium plated brown headed stopcock, 12 mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling the masonry and re-doing the same to the original condition

Supplying and fixing in position Indian make Wash Hand Basin of size 550 x 400mm of approved quality

Supplying and fixing of Urinal for standerd size of aproved by department officer

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm with T.W switch box with 3mm thick hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point -SD 38

Wiring with 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm T.W switch box with 3mm thick hylum sheet for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Power plug point -SD 40

Providing, supplying & laying of Chlorinated Poly Vinyl Chloride (CPVC-SDR-13.5) Pipes conforming to IS 15778 having thermal stability cold water with brass and CPVC fittings like Elbow, Brass Tee, Brass Elbow, Offsets, Tee with clamps @1.00 meters spacing, with jointing of pipes with one step CPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, Exposed work including chase cutting, bracket fixing)complete complying with standard specification and as directed by the Departmental Officer. CPVC 20mm Dia Pipe

Providing, supplying & laying of Chlorinated Poly Vinyl Chloride (CPVC-SDR-13.5) Pipes conforming to IS 15778 having thermal stability cold water with brass and CPVC fittings like Elbow, Brass Tee, Brass Elbow, Offsets, Tee with clamps @1.00 meters spacing, with jointing of pipes with one step CPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, Exposed work including chase cutting, bracket fixing)complete complying with standard specification and as directed by the Departmental Officer.CPVC 25mm Dia Pipe

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Director/Addl Director/Deputy Director before use on works). a) Supplying and Fixing 75mm dia

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Director/Addl Director/Deputy Director before use on works). b) Supplying and Fixing 110mm dia

VISITORS CENTRE Clearing scrub jungle growth

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Supplying and filling sand in foundation, basement and in trenches rammed and consolidated etc. complete.

Filling with Gravel complying with standard specification for filling in foundation and basement

Anti- termite treatment

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Reinforced Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) MS (or) RTS rods

Brick Work in Cement Mortar 1:5 using country bricks of size 8 3/4"x 4 1/4" x 2 3/4" including cost and conveyance of all materials at site ,labour charges, curing, etc.., complete and as directed by the department officers

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Preparing surface and plastering with cement mortar 1:5 (1cement, 5 sand) 12mm thick to walls finished smooth including GI Chicken mesh of 20 gauge as approved shall used over junction of concrete and masonry wall about 150mm wide fixed with nail, the rate to be including debris cleaning and finishing in all respects , all material and labour Charges , Wastage and all Taxes , Materials lead and lift , necessary scaffoldings, staging's, curing, finishing necessary scaffolding, curing, clearing of mortar debris away from the Site etc complete in all floors.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet Black with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Providing and fixing of approved wall cladding and make.

Providing and applying two coats of external emulsion paint approved colur and make ( ASIAN, BERGER, NEROLAC, ICI or equivalent) for walls over the two coats of putty and one coat of primer, including surface preparation, scaffolding wherever required, watering, curing, cleaning, covering the floors. Paint to be applied as per manufacturer's specification, etc, complete. All complete as per detail drawings and specifications.

Supplying and fixing of India Gypsum board with WPC Panels, aluminium framing of necessary intervals with putty, primer, painting along with the necessary coves and allowing all the light fixtures, fan, etc, complete.

Supplying and fixing of master plan engraved granite, complete.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm with T.W switch box with 3mm thick hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point -SD 38

Wiring with 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm T.W switch box with 3mm thick hylum sheet for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Power plug point -SD 40

Supply and fixing of 4' 40W Flu. Fitting complete with Electronic ballast with T.W round block on wall or ceiling with flu. Tube with PVC unseathed copper leads from terminal to the fitting (make: Philips/ Crompton/ Wipro/ Equivalent)SD 88

COMPOUND WALL Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

R.R.Masonry in Cement mortar 1 : 5 for Foundation and Basement (New stone)

Brick work in following Cement Mortar using best quality of II Class Ground Moulded Chamber Burnt Brick of size 9" x 43/8" x 23/4"for foundation and basement including curing, etc., complete complying with standard specifiction. (CM 1:5)

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

White washing one coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers.

Providing, supplying & laying of Chlorinated Poly Vinyl Chloride (CPVC-SDR-11 Pipes conforming to IS 15778 having thermal stability cold water with brass and CPVC fittings like Elbow, Brass Tee, Brass Elbow, Offsets, Tee with clamps @1.00 meters spacing, with jointing of pipes with one step CPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, Concealed work including chase cutting)complete complying with standard specification and as directed by the Departmental Officer.a) CPVC 20mm Dia Pipe

Providing, supplying & laying of Chlorinated Poly Vinyl Chloride (CPVC-SDR-11 Pipes conforming to IS 15778 having thermal stability cold water with brass and CPVC fittings like Elbow, Brass Tee, Brass Elbow, Offsets, Tee with clamps @1.00 meters spacing, with jointing of pipes with one step CPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, Concealed work including chase cutting)complete complying with standard specification and as directed by the Departmental Officer.b) CPVC 25mm Dia Pipe

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm with T.W switch box with 3mm thick hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point -SD 38

Designing works for Green wall in Front of road iun all department specification and all approval.

Designing works for Arting paint for in Front of road iun all department specification and all approval.

NEW FORMATION OF THE ROAD Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soild not exceeding 150mm in thickness as per Technical Specification Clause 201.

Earth work excavation in all types of soils for the construction of roadway embankment to the required line, grade, slope and level as per drawings including stacking reusable materials and disposal of unwanted excavated material with a lead of 1 Km and all lift as per Technical Specification clause 301 of MORT&H specifications complete and as directed by Engineer FOR CUTTING

Granular Sub-base with Graded Material (Table:400-1) - Plant Mix Method (Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401) - for Grading-V material

Wet Mix Macadam (Table:400-13) (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 406)

Prime coat: Providing and applying primer coat with bitumen emulsion (SS-I type) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per clause 111, 112, 502 & 900 of MORTH Vth Revision - over WMM/ WBM

Tack coat - Providing and applying tack coat with bitumen emulsion (RS-I type) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per clause 111, 112, 503, 900 of MORTH Vth Revision - over granular surfaces treated with primer

Bituminous Macadam: Providing and laying bituminous macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder (Viscosity Grade 30), transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction, complete as per clause 111, 112, 501, 504 & 900 of MORTH Vth Revision- Grading II (Table 500-7)

Bituminous Concrete (Table 500-17): Providing and laying bituminous concrete with hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (Viscosity Grade-30) at percentage specified by JMF of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.507 complete in all respects) - Grading-II

ADVENTURE ZONE Supplying and insatalation of oudoor play equpments cosedering shape desing at par with euro standared in terms of saffty asepect with nessery BIS Cirtified in raw matterial , Iteam includs of Rope Climber tent , horizontal lader , loop raing lader , Rope clamber, intagrater fitness moduer haingan move modue , sky climber , romen ring Course Tower. The cost inclusive of transport, installation,, Civil work Foundation , fixing and complete.

DRINKING WATER SUPPLY Geological survey for divining the water level

Clearing scrub jungle growth

Drilling bore well from 0 to 200 feet in depth in hard gravelly soil and hard rock and etc., (150mm dia)

Drilling bore well from 200 to 300 feet in depth in hard gravelly soil and hard rock and etc.,

Drilling bore well from 300 to 400 feet in depth in hard gravelly soil and hard rock and etc.,

Drilling bore well from 400 to 500 feet in depth in hard gravelly soil and hard rock and etc.,

Drilling bore well from 500 to 600 feet in depth in hard gravelly soil and hard rock and etc.,

Drilling bore well from 600 to 700 feet in depth in hard gravelly soil and hard rock and etc.,

Drilling bore well from 700 to 800 feet in depth in hard gravelly soil and hard rock and etc.,

Drilling bore well from 800 to 900 feet in depth in hard gravelly soil and hard rock and etc.,

Drilling bore well from 900 to 1000 feet in depth in hard gravelly soil and hard rock and etc.,

Drilling bore well from 1000 to 1080 feet in depth in hard gravelly soil and hard rock and etc.,

Supply and fixing 7" Dia PVC Casing Pipe

5 HP High efficiency submersible motor with pump

1 1/4" UPVC Pipe

3 Core 4sqmm Cable

Accessories for Borewell

Erecting for Borewell

5 HP solar water pumping inverter with MPPT, VFD & Auto ON/OFF Timer

3 phase panel board including labour charges

Drinking water R.O Plant 10000 Litrs.

60000 litres Capacity RCC OHT Earth work excavation & Depositing on bank with Initial lead of 10m and lift & 2m in hard stiff clay, stiff black cotton hard red earth shales, murram, gravel stoney earth and earth mixed with small size boulder and in hard gravelly soils per SS 20B Including all other incidental charges such as slurring strutting, baling out water forming, protective bunds etc., complete for foundation. First Depth of 1 m

Earth work excavation & Depositing on bank with Initial lead of 10m and lift & 2m in hard stiff clay, stiff black cotton hard red earth shales, murram, gravel stoney earth and earth mixed with small size boulder and in hard gravelly soils per SS 20B Including all other incidental charges such as slurring strutting, baling out water forming, protective bunds etc., complete for foundation. Second depth of 1m

Supply and filling with M-Sand including cost of M-Sand watering, ramming and consolidation etc. complete as directed by the department officers

Cement concrete 1:4:8 mix using 40mm ISS HBG metal for foundation including cost and conveyance of all materials to site and watering whenever necessary and laid in layers not more than 15cm thick compacting etc., complete complying with std. Specifications and as directed.

Filling with excavated earth other than sand including all labour charges as per standard specification.

Supplying and erecting centering are strutting including neceassary supports for place surface for PCC works erc., using mild steel angles of sizes 90x60x10cm gauge stiffness welded mild steel angles of sizes 25x25x3mm for boarding laying over silver oak joists of single 10cm -6.5cm space of 75cm centre to centre complete complying with standard specificatinon Below ground level

Supplying and erecting centering are strutting including neceassary supports for place surface for PCC works erc., using mild steel angles of sizes 90x60x10cm gauge stiffness welded mild steel angles of sizes 25x25x3mm for boarding laying over silver oak joists of single 10cm -6.5cm space of 75cm centre to centre complete complying with standard specificatinon Above GL - 0m to 3.30m

Above GL - 3.31m to 4.30m

Above GL - 5.31m to 6.30m

Above GL - 8.31m to 9.30m

Above GL - 11.31m to 12.30m

Above ground level - 0 m to 3.30m

Above Ground level -3.30m to 4.30m

Below Ground level

0m to 3.30m- Above ground level

3.30m to 4.30m- Above ground level

4.30m to 5.30m- Above ground level

5.30m to 6.30m- Above ground level

6.30m to 7.30m- Above ground level

7.30m to 8.30m- Above ground level

8.30m to 9.30m- Above ground level

9.30m to 10.30m- Above ground level

10.30m to 11.30m- Above ground level

11.30m to 12.30m- Above ground level

Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification . The binding wire will be supplied by the contractor as per clause MOST specification.

Reinforced Cement concrete 1: 1 1/2:3 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and watering whenever necessary and laid in layers not more than 15cm thick compacting etc., complete complying with std. Specifications and as directed.1.50m to 4.50m below Ground level

0m to 1.50m below Ground level

0m to 4.50m above Ground level

4.51m to 7.32m from ground level

7.33m to 10.98m from Ground level

10.99m to 14.64m from Ground level

14.65m to 18.30m from Ground level

Painting two coats with ready mixed Plastic Emulsion of I st Class Quality paint and of approved colour over a priming coat including through scrapping, clean removal of dirt and cost and conveyance of all materials and labour charges etc,complete.

Fabrication,supply, delivery and fixing of outside M.S. Ladder of 45cm clear wide made out of 50mm x 50 mm x 6mm M.S. angle for sides and steps in 16mm MS plain rods fixed at 30 cm C/C welded jointed etc., providing with suitable side supports, clamps and locking arrangements provided with two coats of approved enamel paint over one coat of redoxide paint, for lproviding access to roof top of OHT of suitable linclined length, including bottom anchorage and transportation and as directed by TWAD Board officers. The rate includes concrete bed block in CC 1:2:4 using 20mm HBGS at top and bottom of suitable size with necessry anchor bolts.

Providing Hand rails over the Roof slab by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixied with 12mm dia Fastner Bolt 75mm long and as directed by the departmental officers.

Supplying and fixing in position of RCC M30 inside access ladder of required height using 20mm size HBG jelly with 2 nos. Of vertical posts of size 0.10mx0.10m and steps of size 0.45mx0.15mx 0.05 m at 30 cm c/c including cost of all materials, centering shuttering, strutting fabrication and placing in position of reinforcement, finishing, curing etc., complete and as directed by TWAD Board Officers.

Providing GI Ventilation arrangement 2 nos mosquito proof nylon net with 65 mm GI pipe and spls as directed by the departmental officers. 1 m 65 mm Gi pipe, 4 nos 65 mm Gi elbow , 4nos cutting and 8 nos threading and 2 nos 65 mm GI tee

Providing and fixing of cut stone (Roughdressed) set in CM 1:3 of size 0.45 X 0.45 X 0.15M at site including cost of all materials, labour charges, curing etc., complete and as directed by Dept. Officers.

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Provisions for pipe connection arrangements for inlet & outlet scour and overflow etc.,cincluding cost of pipes, specials, valve, labour charges for lifting , aligning, cutting,threading,fixing and painting of GI pipes with two coat of approved quality enamel paint etc.,complete 65 mm dia GI pipes for inlet connection, over flow & rainwater harvesting pipe,scour pipe and delivary pipe

75 mm dia PVC Threaded coupler

65 mm G.I. Tee

65 mm G.I. Bend

65 mm G.I. Elbow

65 mm G.I. Flange set with rubber sheet

65 mm dia G.I. Hex Nipple

65 mm G.I. Coupler

65 mm G.M. Gate Valve with wheel

Cutting of GI Pipes

Threading of GI Pipes

Supplying, Delivery , Laying jointing and pressure testing of 63mm dia PVC Pipes and specials for conveying main and branch Pumping main including earthwork, refilling etc.,complete as per Standard specification etc.,complete - For Delivary line 63 mm OD PVC 4 KSC Pipe

63 mm dia PVC Coupler

63 mm dia PVC Elbow (Mould)

63 mm dia PVC Tee

Supply of 63mm dia PVC MTA

50 mm dia GI Pipe

50 mm dia GI Coupling

50 mm dia GI Union

50 mm dia GI Hex Nipple

50 mm dia GM Gate valve

CI Single Air valve(14845/2000)

Solvent cement 1 litre

Earth work excavation hard stiff clay and hard rock earth and pipe laying, Jointing and refilling the trench with excavation soils including all labour charges etc.,complete Delivary line - 63mm dia PVC Pipe line

Lowering the PVC pipes and joining with specials , laying the pipes to proper gradient as directed by the dept., officials including all labour charges etc.,complete

CONSERVATION CENTRE AND NIGHT STUDIO- LED BOARDS Supply of Rectangular LED Panel with LED backlight true view video wall of 43"(1mx0.5m), 4k resolution for digital wall of width 10m and height 2m. Educational Content: LED displays can showcase interactive educational content about conservation efforts, endangered species, ecosystems, and environmental issues. They can provide visually engaging presentations that help visitors understand the importance of conservation and the impact of human actions on the environment. Information Dissemination: LED displays can disseminate important information about ongoing conservation projects, initiatives, and research conducted by the center. This helps raise awareness among visitors about the center's contributions to conservation efforts locally and globally. Visual Representation: LED displays can visually represent data, such as population trends of endangered species, climate change patterns, or deforestation rates. By presenting data in a visually compelling manner, visitors can better comprehend complex environmental concepts and the urgency of conservation actions. Interactive Exhibits: LED displays can be integrated into interactive exhibits where visitors can actively engage with conservation-themed games, quizzes, or simulations. This hands-on approach fosters a deeper understanding and appreciation for conservation principles.

Fixing of LED panel with ply backing to suite the curve wall to achieve the curve effect. The cost inclusive of transport, installation, electrical wiring, labour cost, transport insurance, etc, fixing and complete. Educational Content: LED displays can showcase interactive educational content about conservation efforts, endangered species, ecosystems, and environmental issues. They can provide visually engaging presentations that help visitors understand the importance of conservation and the impact of human actions on the environment. Information Dissemination: LED displays can disseminate important information about ongoing conservation projects, initiatives, and research conducted by the center. This helps raise awareness among visitors about the center's contributions to conservation efforts locally and globally. Visual Representation: LED displays can visually represent data, such as population trends of endangered species, climate change patterns, or deforestation rates. By presenting data in a visually compelling manner, visitors can better comprehend complex environmental concepts and the urgency of conservation actions. Interactive Exhibits: LED displays can be integrated into interactive exhibits where visitors can actively engage with conservation-themed games, quizzes, or simulations. This hands-on approach fosters a deeper understanding and appreciation for conservation principles.

Night Studio Amusement 9D Virtual Reality Tour Simulator inclusive of VR Headset, upto 12-16 players and 30-50 games, product dimensions of 37 sq.m. Educational Content: LED displays can showcase interactive educational content about conservation efforts, endangered species, ecosystems, and environmental issues. They can provide visually engaging presentations that help visitors understand the importance of conservation and the impact of human actions on the environment. Information Dissemination: LED displays can disseminate important information about ongoing conservation projects, initiatives, and research conducted by the center. This helps raise awareness among visitors about the center's contributions to conservation efforts locally and globally. Visual Representation: LED displays can visually represent data, such as population trends of endangered species, climate change patterns, or deforestation rates. By presenting data in a visually compelling manner, visitors can better comprehend complex environmental concepts and the urgency of conservation actions. Interactive Exhibits: LED displays can be integrated into interactive exhibits where visitors can actively engage with conservation-themed games, quizzes, or simulations. This hands-on approach fosters a deeper understanding and appreciation for conservation principles.

Supplying and fixing of VR Simulator set in the night studio. The cost inclusive of transport, installation, electrical wiring, labour cost, transport insurance, etc, fixing and complete. Educational Content: LED displays can showcase interactive educational content about conservation efforts, endangered species, ecosystems, and environmental issues. They can provide visually engaging presentations that help visitors understand the importance of conservation and the impact of human actions on the environment. Information Dissemination: LED displays can disseminate important information about ongoing conservation projects, initiatives, and research conducted by the center. This helps raise awareness among visitors about the center's contributions to conservation efforts locally and globally. Visual Representation: LED displays can visually represent data, such as population trends of endangered species, climate change patterns, or deforestation rates. By presenting data in a visually compelling manner, visitors can better comprehend complex environmental concepts and the urgency of conservation actions. Interactive Exhibits: LED displays can be integrated into interactive exhibits where visitors can actively engage with conservation-themed games, quizzes, or simulations. This hands-on approach fosters a deeper understanding and appreciation for conservation principles.

DIGISYNTHETIC 3D Holographic Fan, 224LED 16.5inch Diameter Animated projectionfan, Dispiy Air Fan Video Projector Educational Content: LED displays can showcase interactive educational content about conservation efforts, endangered species, ecosystems, and environmental issues. They can provide visually engaging presentations that help visitors understand the importance of conservation and the impact of human actions on the environment. Information Dissemination: LED displays can disseminate important information about ongoing conservation projects, initiatives, and research conducted by the center. This helps raise awareness among visitors about the center's contributions to conservation efforts locally and globally. Visual Representation: LED displays can visually represent data, such as population trends of endangered species, climate change patterns, or deforestation rates. By presenting data in a visually compelling manner, visitors can better comprehend complex environmental concepts and the urgency of conservation actions. Interactive Exhibits: LED displays can be integrated into interactive exhibits where visitors can actively engage with conservation-themed games, quizzes, or simulations. This hands-on approach fosters a deeper understanding and appreciation for conservation principles.

3D Holographic fan of 85 cm diameter of 24 V, 1080px and resolution of 1024x1024 with 8 blades. Educational Content: LED displays can showcase interactive educational content about conservation efforts, endangered species, ecosystems, and environmental issues. They can provide visually engaging presentations that help visitors understand the importance of conservation and the impact of human actions on the environment. Information Dissemination: LED displays can disseminate important information about ongoing conservation projects, initiatives, and research conducted by the center. This helps raise awareness among visitors about the center's contributions to conservation efforts locally and globally. Visual Representation: LED displays can visually represent data, such as population trends of endangered species, climate change patterns, or deforestation rates. By presenting data in a visually compelling manner, visitors can better comprehend complex environmental concepts and the urgency of conservation actions. Interactive Exhibits: LED displays can be integrated into interactive exhibits where visitors can actively engage with conservation-themed games, quizzes, or simulations. This hands-on approach fosters a deeper understanding and appreciation for conservation principles.

Supplying of Holographic Interactive Projector crafted in a sleek Transparent color, offering a unique and captivating interface that enthralls audiences. Its compatibility via USB ensures easy integration into various setups, granting accessibility and convenience for public to interact.

Supplying and fixing of Holographic Fan, Projector Screen and Interactive Projector in the night studio. The cost inclusive of transport, installation, electrical wiring, labour cost, transport insurance, etc, fixing and complete. Educational Content: LED displays can showcase interactive educational content about conservation efforts, endangered species, ecosystems, and environmental issues. They can provide visually engaging presentations that help visitors understand the importance of conservation and the impact of human actions on the environment. Information Dissemination: LED displays can disseminate important information about ongoing conservation projects, initiatives, and research conducted by the center. This helps raise awareness among visitors about the center's contributions to conservation efforts locally and globally. Visual Representation: LED displays can visually represent data, such as population trends of endangered species, climate change patterns, or deforestation rates. By presenting data in a visually compelling manner, visitors can better comprehend complex environmental concepts and the urgency of conservation actions. Interactive Exhibits: LED displays can be integrated into interactive exhibits where visitors can actively engage with conservation-themed games, quizzes, or simulations. This hands-on approach fosters a deeper understanding and appreciation for conservation principles.

ELECTRICAL WORK Run off 4 core .10 Sq.mm Aromured aluminium cabile .

HORIZONTAL THREE PHASE DISTRIBUTION BOARD WITH MCBS 4 way / 6 way / 8 way / 12 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm TPMCB DB with Metal Door Cover with IP 42 Protection HIGHER END

Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with continuous earth by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for POINT WIRING WITH CALLING BELL/BUZZER WITH PUSH TYPE SWITCH FOR ALL TYPE OF BUILDINGS including citcuit mains, cost of all materials, specials, etc., all complete,

3 Phase Panel Board including labour charges ( Connecting for all DB)

Supplying and fixing of 20W down light for ambient ligting of approved design. The rate also inclusive of drivers and sockets, complete.

Supplying and fixing of Accent / Decorative light of approved design. The rate also inclusive of drivers and sockets, complete.

Supplying and fixing of ceiling fan of 1200 mm dia of approved brand and design. The rate also inclusive of drivers and sockets, complete.

Supplying and fixing of 1x36w box type TL Fitting of approved brand. The rate also inclusive of drivers and sockets, complete.

Supplying and fixing of 20w wall bracket light of approved brand. The rate also inclusive of drivers and sockets, complete.

Supplying and fixing of Exhaust fan of approved brand. The rate also inclusive of drivers and sockets, complete.

Supplying and fixing of 6A switched socket of approved brand.

Supplying and fixing of 16A switched socket of approved brand.

Supplying and fixing of casette AC with proper duct system to achieve required temperature of Loris Lore conservation centre and night studio of approved brand.

Supplying and fixing of M-2075, 200kva Generators of approved brand.

Supplying and fixing of lamp post of 80w of height 5m vertical post with LED, rate inclusive of necessary power provisions, sockets along with driver of approved make.

Supplying and fixing of bollards of 30W LED light, rate inclusive of necessary power provisions, sockets along with driver of approved make.

Supplying and fixing of M-1937, 250KVA, 11 KV/433 V Outdoor Oil Cooled Trabsformer with off Circuit (As per IS 1180-Level 2)

Supplying and fixing of one way compound wall light of 6w, including sockets and driver.

Supplying and fixing of commercial fountain with single nose along with necessary LED lights, with 1HP motor, 26GPM (galllons per minute) of approved make. The rate also inclusive of water proof cable from the power source, sockets, etc, complete.

Supplying and fixing of reverse osmosis drinking water system kiosk which includes drinking water supply, light provision, water dispensar with puff panel roof under raw power socket.

Fencing work Earth work excavation and depositing onbank within initial lead and lift 10mts & 2mts respectively in hard stiff clay, stiff balck cotton, hard red earth, shalves, murams, gravel, stoney earth and earth mixed with small size boulders and gravelly soil-SS 20B

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Supplying, Delivery and Fabrication of MS Pipes 65mm and specials with following size including all the cost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification.

Supplying, and fixing of chain link fencing of size 2" x 2" using 10 gauge galvanished iron wire including all the cost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification.

Supplying, and tirying of galvanished iron wire(10 gauge) for fencing support including all the cost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification.

Painting one coat red acid and two coats with ready mixed approved paint over New steel surface including cost and conveyance all materials etc. complete, as per standard specfication.

GAZEBO Clearing scrub jungle growth.

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means.

Earth work excavation for (Sumps, Tanks and Open Excavation) and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification . The binding wire will be supplied by the contractor as per clause MOST specification.

Providing and laying of matt vitrified tile flooring with wooden grains of size not less than 600mm x 600mm width 10mm thickness over minimum 25mm thick cement mortar bed of 1:4 ratio to make up required finished floor level or adhesive of laticrete or equivalent make using 2mm thick spacers pointing the joints with matching epoxy based grout, inclusive of acid wash and complete.

Supplying and fixing of India Gypsum board with WPC Panels, aluminium framing of necessary intervals with putty, primer, painting along with the necessary coves and allowing all the light fixtures, fan, etc, complete.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm with T.W switch box with 3mm thick hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point -SD 38

INTERIOR WORKS Supplying of cane frame/ wooden furnitures of approved colours and quantity.4 seater dining set (4 chairs, 1 round table) PRODUCT DETAILS - Dining Chair - Set Of 4 (Blue, Dark Walnut Finish) Dimensions : 78.2 cm H x 45.5 cm W x 52.5 cm L ;Dining Table (Dark Walnut Finish) Dimensions : 74.0 cm H x 90.0 cm Radius

Supplying of cane frame/ wooden furnitures of approved colours and quantity. 4 seater dining set (4 chairs, 1 rectangle table) PRODUCT DETAILS - Dining Chair - Set Of 4 (Blue, Dark Walnut Finish) Dimensions : 78.2 cm H x 45.5 cm W x 52.5 cm L ;Dining Table (Dark Walnut Finish) Dimensions : 74.0 cm H x 90.0 cm W x 150.0 cm L

Supplying of cane frame/ wooden furnitures of approved colours and quantity. Lecture Hall chair (at first floor information podium) ZOWWI Stylish Norton Leatherette Guest Chair - Ideal for Office, Reception, or Waiting Areas

Supplying of cane frame/ wooden furnitures of approved colours and quantity. Wooden Benches with back rest of 1.5 m wide

Interactive Centre Centre Supplying of cane frame/ wooden furnitures of approved colours and quantity. 4 seater dining set (4 chairs, 1 rectangle table) PRODUCT DETAILS - Dining Chair - Set Of 4 (Blue, Dark Walnut Finish) Dimensions : 78.2 cm H x 45.5 cm W x 52.5 cm L ;Dining Table (Dark Walnut Finish) Dimensions : 74.0 cm H x 90.0 cm W x 150.0 cm L

Supplying of cane frame/ wooden furnitures of approved colours and quantity. Table of size 1.2x2.6 office table with wooden walnut finish

Supplying of cane frame/ wooden furnitures of approved colours and quantity. Office Chair Executive Office Chair In Black Colour-Back Dimensions: Width x Height - 50 x 72 cm. Seat Height Range - 44 - 56 cm. Arm Height Range - 65 -73 cm.

Supplying of cane frame/ wooden furnitures of approved colours and quantity. Visitor chairs Visitor Chair with Fixed Arms and Mesh Black , MS Chrome / Powder coated optional , PP Arms , Mesh + Fabric Upholstery

Single fabric Seater

Supplying and fixing of plywood Rectangular displays of deco paint finish of size 0.6m X 1m X 0.75m

Supplying and fixing of plywood Square displays of deco paint finish of size 0.6m X 0.6m X 0.75m

Supplying and fixing of plywood Holographic Display of deco paint finish pedestal of size 1m dia

Supplying and fixing of plywood Holographic Display of deco paint finish pedestal of size 1m X 3.5m

Supplying of cane frame/ wooden furnitures of approved colours and quantity. Cot of size 1.2m X 1.8m Wood Walnut Finish, Mattress Size: 72x36 Inch

Supplying of cane frame/ wooden furnitures of approved colours and quantity. Side table of size 0.5m X 0.9m Wood walnut Finish

Supplying of cane frame/ wooden furnitures of approved colours and quantity. Counter Table 0.6m x 1.2m Polished Finish Rectangular Termite Proof Wooden Reception Desk with walnut finish

Chairs Plastic Arm Chair (Iron Black)

Chairs Solid Wood Seating Bench Wooden Furniture with Teak Finish

Counter Table 0.6m x 4.63m Machine Made Modular Reception Desk Table

Chairs Painted Leather Chair

Supplying and fixing of acoustic foam panels to block sound, noise and vibration. The rate inclusive of installations with necessary fixing methods, screws, bolts, joint sealants, etc to complete. Acoustic Panels

Supply for battery operated vehicles 5 Sheater

Supply for Swaraj Mazda bus 25 Sheater

Provision for Supplying and Fixing of Solar Panel Installation and connection for battery for all necessary work. 23 KV in Collecting all acceries.

KIDS PLAY AREA Supplying and fixing of kids fun station . All the design material follow the BIS Standrads and Euro desing standrads,- the Size and the hights can be follows asper Manufactrual standers.

Supplying and fixing of 6 Sheater dome swing All the design material follow the BIS Standrads and Euro desing standrads,- the Size and the hights can be follows asper Manufactrual standers.

Supplying and fixing of swing set. All the design material follow the BIS Standrads and Euro desing standrads,- the Size and the hights can be follows asper Manufactrual standers.

Supplying and fixing of FRP Playground Slide. All the design material follow the BIS Standrads and Euro desing standrads,- the Size and the hights can be follows asper Manufactrual standers.

Supplying and fixing of 8 feet children jumping tampoline. All the design material follow the BIS Standrads and Euro desing standrads,- the Size and the hights can be follows asper Manufactrual standers.

Supplying and fixing of spring rider of approved design. All the design material follow the BIS Standrads and Euro desing standrads,- the Size and the hights can be follows asper Manufactrual standers.

Supplying and fixing of FRP (Fiber Reinfored plast) merry go round of seating capacity four. All the design material follow the BIS Standrads and Euro desing standrads,- the Size and the hights can be follows asper Manufactrual standers.

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Levelling, filling Works and Supply and fixind Lawn area Clearing scrub jungle growth.

Earthwork excavation in all clauses of soils and depositing on bank with initial lead and lift for foundation as per ss20B

Soil Levelling work for JCB / Houre and Compactting works in filling area/ Earth Ramming work.

Supplying and Fitting of planting work.

Creation of Lawn (Mexican Grass) all works including of this rate approved by dipartment officer.

Providing, supplying & laying of Chlorinated Poly Vinyl Chloride (CPVC-SDR-11 Pipes conforming to IS 15778 having thermal stability cold water with brass and CPVC fittings like Elbow, Brass Tee, Brass Elbow, Offsets, Tee with clamps @1.00 meters spacing, with jointing of pipes with one step CPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, Concealed work including chase cutting)complete complying with standard specification and as directed by the Departmental Officer. a) CPVC 20mm Dia Pipe

b) Supplying and laying Trip errication

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification . The binding wire will be supplied by the contractor as per clause MOST specification.

TRAIL WALK Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means.

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification . The binding wire will be supplied by the contractor as per clause MOST specification.

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Preparing surface and plastering with cement mortar 1:5 (1cement, 5 sand) 12mm thick to walls (Internal Walls ) finished smooth including GI Chicken mesh of 20 gauge as approved shall used over junction of concrete and masonry wall about 150mm wide fixed with nail, the rate to be including debris cleaning and finishing in all respects , all material and labour Charges , Wastage and all Taxes , Materials lead and lift , necessary scaffoldings, staging's, curing, finishing necessary scaffolding, curing, clearing of mortar debris away from the Site etc complete in all floors.

Supply and fixing of mild steel angel work

Supplying and fixing of everwood WPC outdoor decking boards merge aesthetics in foot path for trail walk

Supplying and fixing of everwood WPC outdoor decking boards merge aesthetics in hand rail for trail walk

SIGNAGES & NAME BOARDS Supplying and fixing of Name boards of size 450 mm x 2000 mm on average. The cost inclusive of supply, transport, installation, labour cost, making, fixing and complete.

Supplying and fixing of Signage Boards of size 150 mm x 300 mm with a 75mm thick post of height 1.4m. The cost inclusive of supply, transport, installation, labour cost, making, fixing and complete.

Supplying and fixing of Awareness Boards of size 600 mm x 1200 mm. The cost inclusive of supply, transport, installation, labour cost, making, fixing and complete.

Supplying and fixing of Awareness Boards of size 600 mm x 1200 mm made out of concrete pedestal with jet black granite lazer cut lettering. The cost inclusive of supply, transport, installation, labour cost, making, fixing and complete.

Pathways in Tracking Path ( Designing work) Clearing scrub jungle growth.

Earthwork excavation in all clauses of soils and depositing on bank with initial lead and lift for foundation as per ss20B

Supplying and fixing of Rought Stone bench 2 Sheetter in stander specification.

Supplying and Fitting of planting work. Ixora dwarf (as Approved of department officer)

Supplying and Fitting of planting work. Pandanus new (as Approved of department officer)

Earth Rammer work for natchural Tracking path

Providing, supplying & laying of Chlorinated Poly Vinyl Chloride (CPVC-SDR-11 Pipes conforming to IS 15778 having thermal stability cold water with brass and CPVC fittings like Elbow, Brass Tee, Brass Elbow, Offsets, Tee with clamps @1.00 meters spacing, with jointing of pipes with one step CPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, Concealed work including chase cutting)complete complying with standard specification and as directed by the Departmental Officer. a) CPVC 20mm Dia Pipe

supplying and laying Trip errication of Including lateral 16mm/14Lph/ tripper, pvc pipe ect,,/.

Natchural stone for Culvert in desining works for canel area in all work of stander specification.

Plain cement concrete 1:5:10 (One cement, 5 sand 10 hard broken stone jelly) using 40 mm HBG ISS Metal for foundation and for flooring inclusive of cost for laying ramming curing etc complete as per TNDSS and as directed by the departmental officers

Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works Using WPC of 2% by weight of cement excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification.

ECO-Water pond Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

R.R.Masonry in Cement mortar 1 : 5 for Foundation and Basement (New stone)

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Designing works for Fountion and landscappingin Front of road iun all department specification and approval. (size 10M X 10M) As per Sanction design

GFRC SCULPTURES Fabrication of Glass Fibre Reinforced Concretre live scale statue modules.

Fabrication of Glass Fibre Reinforced Concretre live scale statue modules.

KONGU CONSTRUCTION AND CONTRACTORS (BID ID -1067644)