CONSTRUCTION OF NEW 2X5MVA 33/11KV SUBSTATION NEAR PRASAD POLYTECHNIC, 33KV LINE AND 11KV FOR NEAR PRASAD POLYTECHNIC, DIST. JAUNPUR ON SEMI TURNKEY BASIS.

SUPPLY OF MATERIALS FOR CONSTRUCTION OF NEW 2X5MVA 33/11KV SUBSTATION JNEAR PRASAD POLYTECHNIC DIST. JAUNPUR.

MS channel 100x50x6mm-3000mm long for fabrication of cable stand and neutral earthing stand for power T/F

MS flat 50*6mm for fabrication of cable stand and neutral earthing stand for power T/F

Battery charger 24V (Float cum boost charger)

Battery set 12 nos.* 2V, 200Ah with stand

Armoured control cable 2x2.5 sqmm

Armoured control cable 4x2.5 sqmm

Armoured control cable 6x2.5 sqmm

Armoured control cable 10x2.5 sqmm

Sub station name and arrow shine board complete by providing MS sheet 1220mm*1220mm*4mm and MS angle 50x50x5 mm

Clamp and connector for 33 kV switchyard equipments (T/F, CT, PT,, LA, ISO etc.)

LT distribution board/panel 440V, 63Amp, 12way type (for testing of T/F VCB etc in switchyard)

Stay insulator for 7/10swg stay wire\, 11 Kv porcelain type

Fuse set fixing clamp

CT Junction box (for control cable wiring)

PT Junction box (for control cable wiring)

LT PVC Armoured Al. cable 4x16sqmm

Cable Glands of all size (For LT panel, control panel, CT & PT junction box, 11kV panel etc)

Furniture of S/s (04 No chair with 01 No Table)

Fire fighting extinguisher (6kg) of sub station as per ISI specification including mounting on wall with the help of clamp

Fire bucket stand with 04 no. buckets (For switchgear/control room & switchyard)

Break down, shut down, rostering name board 04 No each

Sodium vapor/Murcary LED lamp 250W complete fitting and of standard quality ISI mark with water light fittings, elbow etc. complete in all respect and suitable for above supports for switchyard lighting

11 kV 3x300 sqmm XLPE cable jointing kit O/D (Make - Raychem, 3M)

11 kV 3x300 sqmm XLPE cable jointing kit I/D (Make - Raychem, 3M)

11 kV 3x185 sqmm XLPE cable jointing kit O/D (Make - Raychem, 3M)

11 kV 3x185 sqmm XLPE cable jointing kit I/D (Make - Raychem, 3M)

G.I pipe 140 mm dia

Rubber matt 2*1.5mtr, 3mm thick as per IS standard

"E" Bracket for 11 Kv

Top channel clamp

Dropper angle clamp

Bracing angle clamp

Stay clamp

Earth wire clamp

LT Schakle insulator clamp

Danger board & clamp with nut & bolt

Stone pad 300x300x75 mm

Cable holding clamp

11 kV TPMO with polymer insulator

PG clamp for DOG conductor

Spacer LT PVC

T/F base Clamp

GI barbed wire

Bolts & Nuts all Size

ERECTION OF CONSTRUCTION OF NEW 2X5MVA 33/11KV SUBSTATION NEAR PRASAD POLYTECHNIC DIST. JAUNPUR.

33 kV pin insulator Polymeric composite

33 kV Line Isolator

33 kV Bus isolator

33 kV Post insulator

33 kV lightening arrestor

33 kV PT single phase 33 kV/110V

5 MVA, 33/11 kV power T/F

90 lbs rail piece for T/F plinth (44.64 Kg/mtr) (02 N0)

33 kV VCB with steel structure

33 kV CT 200/100/1A

ACSR WEASEL conductor (for 3P4W LT line)

63 KVA 11/0.4 kV Transformer

PCC pole 8.5 M

Top channel 100x50x6-2240 mm (11Kv)

11 kV MS channel for dropper 100x50x6-2028 mm

MS bracing angle 65x65x6mm-2700 mm long (11 Kv)

11 kV T/F base MS channel 75x75x6-2028mm

Stay rod 16*1800 mm

Stay wire 7/10 SWG

11 kV Disc insulator polymeric 45 KN

11 kV Disc fitting

11 kV Pin insulator polymeric

MS earthing rod 20*2500 mm

LT shakle insulator

GI wire 5mm (for pole earthing & LT line earthwire)

T/F Fresh Oil

11 kV fuse set

Battery charger 24V (Float cum boost charger)

Battery set 12 nos.* 2V, 200Ah with stand

Armoured control cable 2x2.5 sqmm

Armoured control cable 4x2.5 sqmm

Armoured control cable 6x2.5 sqmm

Armoured control cable 10x2.5 sqmm

Sub station name and arrow shine board complete by providing MS sheet 1220mm*1220mm*4mm and MS angle 50x50x5 mm

Clamp and connector for 33 kV switchyard equipments (T/F, CT, PT,, LA, ISO etc.)

LT distribution board/panel 440V, 63Amp, 12way type (for testing of T/F VCB etc in switchyard)

Stay insulator for 7/10swg stay wire\, 11 Kv porcelain type

Fuse set fixing clamp

CT Junction box (for control cable wiring)

PT Junction box (for control cable wiring)

LT PVC Armoured Al. cable 4x16sqmm

Cable Glands of all size (For LT panel, control panel, CT & PT junction box, 11kV panel etc)

Furniture of S/s (04 No steel chair with 01 No engineered wood type Table)

Fire fighting extinguisher (6kg) of sub station as per ISI specification including mounting on wall with the help of clamp

Fire bucket stand with 04 no. buckets (For switchgear/control room & switchyard)

Break down, shut down, rostering name board 04 No each

Sodium vapor/Murcary LED lamp 250W complete fitting and of standard quality ISI mark with water light fittings, elbow etc. complete in all respect and suitable for above supports for switchyard lighting

G.I pipe 140 mm dia

Rubber matt 2*1.5mtr, 3mm thick as per IS standard

"E" Bracket for 11 Kv

Top channel clamp

Dropper angle clamp

Bracing angle clamp

Stay clamp

Earth wire clamp

LT Schakle insulator clamp

Danger board & clamp with nut & bolt

Stone pad 300x300x75 mm

Cable holding clamp

11 kV TPMO with polymer insulator

PG clamp for DOG conductor

Spacer LT PVC

T/F base Clamp

GI barbed wire

Bolts & Nuts all Size

Grouting and concreting of PCC pole along with plinthing/muffing as per RESPO norms

Concreting of Stay rod 20x1800 mm as per RESPO norms

Earthing of S/s outdoor equipments as per RESPO norms, Laying of earth mat in the switchyard by laying of MS round of 32 mm dia in 1000mm deep trenches with MS round 32 mm dia, 3 mtr long earth electrodes as per RESPO norms. The work includes welding of the MS round, conneting all steel structures in the switchyard with the earth mat by means of GI strips of size 50x6mm as per item below. (All required materials will be provided by contractor):- (A) Excavation of earth for laying mat

(B) Driving of earth electrode (32mm dia, 3 mtr long)

(C) Laying of earth mat (MS) bar including cutting, shaping and binding etc.

(D) Preparation of joints, proper making and welding of main earth mat bar joints and applying bitumen impregnated on joints i.e. end joints, cross joints and lap joints

(E) Welding of riser strip with earth mat and department structure body (One set means one riser strip welding to main equipments.)

Earthing of S/s for indoor equipments as per RESPO norms By way of boring and lowering 'B' class GI pipe 2'' dia, - 3no*20 mtr deep (02 no for both side of switchgear room in delta connection earthing and making earthing pit for each) by providing all materials like 'B' class GI pipe 2'' dia, 50*6mm GI strip, socket, sand, charcoal, bricks, cement etc. (All required materials will be provided by contractor)

Digging & Making of standard size Pakka cable trench by providing cement, sand, bricks & C.C. trench cover for laying of 11 kV 3x300 sqmm XLPE cable from both 5MVA Transformer (All required materials like cements, sands, bricks & C.C. trench cover etc will be provided by contractor)

Laying & dressing of 11 kV, 3*300 sqmm underground cable from 5MVA T/F to 11 kV incoming switchgear in the standard size Pakka trench providing fine sand, cushion beneath and fine sand cushion above the cable. The cable shall be duly protected by bricks, sand & saparate stone slab. (All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Digging & making of standard size cable trench by providing sand, bricks & saparate stone slab for each 11 kV 3x185 sqmm XLPE cable (All required materials like sands, bricks & stone slab etc will be provided by contractor)

Laying & dressing of 11 kV,3*185 sqmm underground cable in the trench providing fine sand, cushion beneath and fine sand cushion above the cable. The cable shall be duly protected by bricks, sand & saparate stone slab. (All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Plinth & foundation for T/F as per RESPO norms Construction of plinth of size 3.50*4.50 Mtr for 5 MVA T/F. (All required materials for civil work like sands, bricks, cement, MS bars, stone grits etc. will be provided by contractor)

Plinth & foundation for 33 kV VCB as per RESPO norms (Construction of plinth of standard size suitable for erection of upper structure for 33 kV VCB including grouting of anchor bolts in proper alignment and level. (All required materials for civil work like sands, bricks, cement, MS bars, stone grits etc. will be provided by contractor)

Digging & Making of Pakka cable trench 450mm wide and 900 mm deep by providing cement, sand, bricks & C.C. trench cover for laying of various size of control cable (All required materials like cements, sands, bricks & C.C. trench cover etc will be provided by contractor)

FABRICATION OF TRANSFORMER SEPARATE EARTHING T/F NEUTRAL EARTHING (A) Seprate earthing of power T/F by way of boring and lowering GI pipe 2'' dia, - 5no*20 mtr deep (02 no for T/F body earthing and 01 no for T/F neutral in delta connection earthing and making earthing pit for each) by providing all materials like GI pipe 2'' dia, 50*6mm GI strip, socket, sand, bricks, cement etc. (All required materials will be provided by contractor) (B) Fabrication and grouting of M.S Channel 100*50*6mm in L- shape with 50*6mm GI strip & in proper size and alignment to provide support for power transformer neutral

Fabrication and erection of cable support made of two pieces of M.S channel 100x50mm,3.0 mtr long joined to each other by means of 5 nos M.S Flat 50x6mm places each by welding at equal intervals and grouting in a block of standard size complete (All required materials like MS channel 100x50x6 mm-3000mm and MS flat 50x6mm will be provided by contractor)

Fixing & jointing of 11 kV,3x300 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 kV,3x300 sqmm XLPE cable Indoor jointing kits on switchgears after carefully removing the insulation of the cable, duly plumbing and taping of cable providing,fixing and crimpling of proper size good quality lugs, duly plumbing and taping of cable properly fixing of lugs on switchgears and boxes complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 Kv 3x185 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 kV,3x185 sqmm XLPE cable Indoor jointing kits on switchgears after carefully removing the insulation of the cable, duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs, duly plumbing and taping of cable properly fixing of lugs on switchgears and boxes complete work (All required materials will be provided by contractor)

Hosting of 11 kV,3*185 sqmmXLPE cable with 100 mm Dia, 3.5 mtr long GI Pipe on the outgoing feeder cable before mounting the cable on the double pole, lifting, mounting and clamping of 11 kV feeder cable boxes on the feeder double pole structure and making connection

Hosting of 11 kV 3*185 sqmm XLPE cable to 11 outgoing feeder switchgear, 11/0.4 kV T/F & 11 kV 3*300 sqmm XLPE cable from 33/11 kV T/F to 11 kV Incommer switchgears

Transformer repairing work in case of providing old & used T/F (repairing work of T/F like changing Gasket, changing O ring of T/F busing, stopping oil leakage etc)

Painting of all structures by red oxide & allumiunium paint (All required materials like red oxide, alluminium paints will be provided by contractor)

Cost for miscelneous works like sandry store, soil filling, T/F cleaning & others

INSTALLATION OF 11kV SWITCHGEARS & CONTROL PANEL IN CONTROLROOM: (A) Shifting carefully & safely 11kV I/C, O/G & bus coupler switchgear from outside of the switchgear room-08 No., (B) Fixing and making bus bar connections in between all switchgears-01 No. & (C) Shifting carefully & installation of 33 kV single circuit transformer control panel in control room- 02 No. as per direction of Engineer in charge (All required materials will be provided by contractor)

FABRICATION, ERECTION & GROUTING OF S/s STRUCTURE:-(A) BUS BAR GANTRY & TERMINAL GANTRY Fabrication, erection, & grouting of Bus bar gantry/ terminal gantry using rail pole and channel as per norms- 06 No.(B) Fabrication of bus isolator & line structure as per norms-06 No., (C) Fabrication of Lightening Arrestor/CT structure/PT structure as per norms-12 No. & (D) Fabrication of Post structure as per norms-12 No.

Digging & Making of standard size Pakka trench in switchyard for laying of control cable & power cable (Sand, cement, bricks and stone slab provided by contractor) as per norms

Cartage of all other material

Erection charges of Power Transformer

SUPPLY OF MATERIALS FOR CONSTRUCTION OF NEW 33 KV LINE FOR NEW 33/11 KV S/S NEAR PRASAD POLYTECHNIC DIST. JAUNPUR FROM 132 KV SIDDIKPUR, JAUNPUR.

X-Arm clamp for STP 11 mtr/PCC 9 Mtr

Top channel clamp for STP 11 mtr with N& B

Dropper angle clamp with N& B

Bracing angle clamp complete with N& B

Guarding angle clamp with N& B

MS angle 65x65x6mm-3200mm for side/height extension bracket

MS channel 125x65x6mm-2200mm for side/height extension bracket

Clamp for MS angle (Side/height extension bracket)

Clamp for MS channel (Side/height extension bracket)

33 kV 'E' bracket with N& B

F/T bracket with clamp for PCC with N& B

PG clamp for DOG conductor

HDPE pipe 160 mm OD PN-4 PE-80 grade UV stabilized as per IS:4984

Danger board 33 kV with clamp

Number plate

GI Barbed wire

Stay insulator for 7/8swg stay wire 33Kv porcelain type

Eye bolt

Nut & bolts with washer

Stone pad 300x300x75mm

GI pipe 6'' dia

Stay clamp

Red oxide paint

Allu. paint

Cable holding clamp

Earth wire clamp with N&B

ERECTION OF CONSTRUCTION OF NEW 33 KV LINE FOR NEW 33/11 KV S/S NEAR PRASAD POLYTECHNIC DIST. JAUNPUR FROM 132 KV SIDDIKPUR, JAUNPUR.

ST pole 11 M long

ST pole 13 M long

PCC pole 9 M long

PCC pole 11 M long

33 kV 'V' type X-Arm 100x50x6 mm, MS channel for STP 11mtr/PCC 9Mtr

ACSR DOG conductor [(14Km*3)+3%]

33 kV Disc insulator 70KN B&S type polymeric

33 kV Disc fitting DOG/RACOON

33 kV Pin insulator polymeric type

33 kV Top channel 125x65x6mm- 3200mm

33 kV Bracing angle 65x65x6mm- 4300mm

MS Gaurding angle 65x65x6mm (3.2mtr*50no*5.8/kg=928 kg)

33 kV Stay rod 20*1800mm

Stay wire 7/8 SWG

Dropper channel

Earthing rod 20*2500 mm

GI wire 5mm

GI wire 4mm

X-Arm clamp for STP 11 mtr/PCC 9 Mtr

Top channel clamp for STP 11 mtr with N& B

Dropper angle clamp with N& B

Bracing angle clamp complete with N& B

Guarding angle clamp with N& B

MS angle 65x65x6mm-3200mm for side/height extension bracket

MS channel 125x65x6mm-2200mm for side/height extension bracket

Clamp for MS angle (Side/height extension bracket)

Clamp for MS channel (Side/height extension bracket)

33 kV 'E' bracket with N& B

F/T bracket with clamp for PCC with N& B

PG clamp for DOG conductor

Danger board 33 kV with clamp

Number plate

GI Barbed wire

Stay insulator for 7/8swg stay wire 33Kv porcelain type

Eye bolt

Nut & bolts with washer

Stone pad 300x300x75mm

GI pipe 6'' dia

Stay clamp

Red oxide paint

Allu. paint

Cable holding clamp

Earth wire clamp with N&B

Grouting and concreting of 11M ST pole along with plinthing/muffing as per RESPO norms

Grouting and concreting of 13M ST pole along with plinthing/muffing as per RESPO norms

Grouting and concreting of 9M PCC pole along with plinthing/muffing as per RESPO norms

Grouting and concreting of 11M PCC pole along with plinthing/muffing as per RESPO norms

Trimming of tree branches on the way of line

Concreting of Stay rod 20x1800 mm as per RESPO norms

Cable route marker height*width =40"x10" and thikness=3""NOMENCLATURE - 33kV UNDERGROUND CABLE, DEPTH - ……METER"

Digging & making of standard size cable trench by providing sand, bricks & saparate stone slab for each 33 kV 3*300 sqmm XLPE cable (All required materials like sands, bricks & stone slab etc will be provided by contractor)

Laying and dressing of 33 kV, 3*300 sqmm XLPE cable in the trench providing fine sand, cushion beneath and fine sand cushion above the cable. The cable shall be duly protected by bricks, sand & saparate stone slab.(All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Horizontal boring & laying of 160mm dia HDPE pipe below railway track after digging of pit by HDD method

Laying and dressing of U/G 33 kV, 3*300 sqmm XLPE cable with double circuit configuration below Railway track crossing into 160mm HDPE Pipe by Horizontal drilling method. The cable loop shall be duly protected by bricks, sand & saparate stone slab. (All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Fixing & jointing of 33 kV,3x300 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 33 kV,3x300 sqmm XLPE cable straight through jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Hosting of 33 kV,3*300 sqmm XLPE cable with 6'' Dia, 3.5 mtr long GI Pipe on the double pole cable before mounting the cable on the double pole, lifting, mounting and clamping on the double pole structure and making connection

Cartage of 33 kV 3x300 sqmm XLPE cable

Cartage charge of all other material

SUPPLY OF MATERIALS FOR CONSTRUCTION OF NEW 11 KV LINE FOR NEW 33/11 KV S/S NEAR PRASAD POLYTECHNIC DIST. JAUNPUR.

Cross arm clamp for STP 11 Mtr

Top channel clamp for11M STP

Bracing angle clamp

Guard angle clamp

Stay clamp

Dropper channel clamp

T-off clamp

MS angle 65*65*6mm

MS channel 100*50*6mm

Clamp for MS angle (Side/height extension bracket)

Clamp for MS channel (Side/height extension bracket)

11 kV 'E' bracket with nut & bolt

11 kV 'T/F' bracket

11 kV, 3*185 sqmm cable jointing kit outdoor

11 kV, 3*185 sqmm cable ST jointing kit

G.I. Barbed wire

Nut, Bolt & Washer

Stone Pad 300*300*75 mm

PG clamp for WEASEL conductor

HDPE pipe 120 mm OD PN-4 PE-80 grade UV stabilized as per IS:4984

GI Pipe 140mm dia

Stay insulator for 7/8swg stay wire 33Kv porcelain type

Eye bolt

Cable holding clamp

Danger board 11kV & clamp with N&B

Red oxide paint

Allu. paint

ERECTION OF CONSTRUCTION OF NEW 11 KV LINE FOR NEW 33/11 KV S/S NEAR PRASAD POLYTECHNIC DIST. JAUNPUR.

PCC pole 8.5 M long

ST pole 11 M long

PCC pole 11 M long

11 kV 'V' type steel X-arm

ACSR RABBIT conductor [(17*3km)+3%] =21.63 Km)

11 kV Disc insulator 45 KN polymer type

11 kV Disc fitting polymer type

11 kV Pin insulator polymer type

11 kV top channel 100*50*6mm-2240 mm

11 kV MS bracing angle 65*65*6mm-2700 mm

MS Dropper channel 100*50*6mm-2200 mm

Guarding angle 65*65*6mm

11 kV T-off Channel

Erection and concreting of Stay rod 20x1800 mm as per RESPO norms

Stay wire 7/10 SWG

Earthing rod 20*2500 mm

G.I wire 5mm

G.I wire 4mm

Cross arm clamp for STP 11 Mtr

Top channel clamp for11M STP

Bracing angle clamp

Guard angle clamp

Stay clamp

Dropper channel clamp

T-off clamp

MS angle 65*65*6mm

MS channel 100*50*6mm

Clamp for MS angle (Side/height extension bracket)

Clamp for MS channel (Side/height extension bracket)

11 kV 'E' bracket with nut & bolt

11 kV 'T/F' bracket

G.I. Barbed wire

Nut, Bolt & Washer

Stone Pad 300*300*75 mm

PG clamp for WEASEL conductor

GI Pipe 140mm dia

Stay insulator for 7/8swg stay wire 33Kv porcelain type

Eye bolt

Cable holding clamp

Danger board 11kV & clamp with N&B

Red oxide paint

Allu. paint

Grouting and concreting of 8.5M PCC pole along with plinthing/muffing as per RESPO norms

Grouting and concreting of 11M ST pole along with plinthing/muffing as per RESPO norms

Grouting and concreting of 11 M PCC pole along with plinthing/muffing as per RESPO norms

Concreting of Stay as per RESPO norms

Cable route marker height*width =40"x10" and thikness=3" "NOMENCLATURE - 11kV UNDERGROUND CABLE, DEPTH - ……METER"

Horizontal boring & laying of 160mm dia HDPE pipe with double circuit configeration below railway track after digging of pit by HDD method

Laying and dressing of underground 11 kV, 3x185 sqmm XLPE cable with double circuit configuration below Railway crossing into 140mm dia HDPE pipe by Horizontal drilling method. The cable loop shall be duly protected by bricks, sand & saparate stone slab. (All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Digging & making of standard size cable trench by providing sand, bricks & saparate stone slab for each 11 kV 3*185 sqmm XLPE cable (All required materials like sands, bricks & stone slab etc will be provided by contractor)

Laying and dressing of 11 kV, 3*185 sqmm XLPE cable in the trench providing fine sand, cushion beneath and fine sand cushion above the cable. The cable shall be duly protected by bricks, sand & saparate stone slab. (All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Fixing & jointing of 11 Kv 3x185 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 Kv 3x185 sqmm XLPE cable straight through jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Hosting of 11 kV,3*185 sqmmXLPE cable with 100 mm Dia, 3.5 mtr long GI Pipe on the double pole cable before mounting the cable on the double pole, lifting, mounting and clamping of 11 kV cable boxes on the double pole structure and making connection

Tree branch cutting

Cartage of 11 Kv 3x185Sqmm XLPE cable

Cartage charges of material