Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | ₹28.0 L Quoted ₹30.9 L | L1 | Accepted-AOC The rates quoted by the contractor are lowest, hence accepted |
| 2 | L2₹32.3 LRejected-Finance | ₹32.3 L | L2 | Rejected-Finance The rates quoted by the contractor are on the higher side, hence rejected. |
| 3 | L3₹33.5 LRejected-Finance | ₹33.5 L | L3 | Rejected-Finance The rates quoted by the contractor are on the higher side, hence rejected. |
| Sl No | Description | Qty | Unit | BILAL AHMED BUTT L1 | VEENESH THAKUR L2 | BHUPENDER SINGH CHANDEL L3 |
|---|---|---|---|---|---|---|
| 1.00 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site Bharyal. including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges | 45 | P.cum | 345 ₹15,525 | 360 ₹16,200 | 400 ₹18,000 |
| 2.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 20.25 | P.Cum | 6,590 ₹1.3 L | 6,700 ₹1.4 L | 7,000 ₹1.4 L |
| 3.00 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 25 | P.Cum | 5,690 ₹1.4 L | 5,800 ₹1.4 L | 6,000 ₹1.5 L |
| 4.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand): 8 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 14 | P.cum | 5,100 ₹71,400 | 5,300 ₹74,200 | 6,000 ₹84,000 |
| 5.00 | Providing and laying heavy duty precast cement concrete interlocking pavers Block M-50 grade made by Block making machine with strong viberatory compaction and ofapproved size and design/shape laid in required gray or coloured over sub base of concrete with 25mm thick or thickness of C.C. 1:4 (1 cement : 4 sand) laid over with near cement sulury mixed with pigment to match the shade of block completed -60mm thick (Two Colour Red & Gray)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 60 | P.Sqm | 1,740 ₹1.0 L | 1,800 ₹1.1 L | 2,000 ₹1.2 L |
| 6.00 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 46.5 | P.Sqm | 515 ₹23,947.50 | 540 ₹25,110 | 600 ₹27,900 |
| 7.00 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 5.92 | P.Cum | 8,750 ₹51,800 | 9,000 ₹53,280 | 10,000 ₹59,200 |
| 8.00 | Providing and fixing Tuffan Glass with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 8 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 30.36 | P.Sqm | 4,100 ₹1.2 L | 4,500 ₹1.4 L | 4,600 ₹1.4 L |
| 9.00 | 6 mm cement plaster to celling in cement mortar 1:3 (1 Cement :3 sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 170.24 | P. Sqm | 215 ₹36,601.60 | 240 ₹40,857.60 | 300 ₹51,072 |
| 10.00 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 1,836.02 | P.Kg | 108 ₹2.0 L | 120 ₹2.2 L | 150 ₹2.8 L |
Tender Value
₹28.7 L
EMD Value
₹57,400
Closing Date
5 Dec 2025, 5:00 pmClosed
Executive Engineer R B MC Shimla
Executive Engineer R B MC Shimla
C O Car Parking cum Community Center at Jungle Ground ward No 10 Tutikandi SH PF of Granite Stone at Staircase Sanitary fitting Finishing work etc
2025_MC_121845_1
2555dated17112025
Open Tender
Civil Works
90 days
Shimla
Please refer to documents
7 documents required · 7 mandatory
₹1,770
Executive Engineer R B MC Shimla
₹57,400
28 Jan 2026
26 Nov 2025
6 Dec 2025
26 Nov 2025
5 Dec 2025
26 Nov 2025
Amount
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site Bharyal. including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand): 8 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and laying heavy duty precast cement concrete interlocking pavers Block M-50 grade made by Block making machine with strong viberatory compaction and ofapproved size and design/shape laid in required gray or coloured over sub base of concrete with 25mm thick or thickness of C.C. 1:4 (1 cement : 4 sand) laid over with near cement sulury mixed with pigment to match the shade of block completed -60mm thick (Two Colour Red & Gray)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing Tuffan Glass with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 8 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
6 mm cement plaster to celling in cement mortar 1:3 (1 Cement :3 sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F M.S grills of required pattern in framed of windows etc. with M.S flats square or round bars etc. Including priming coat with approved steel primer all complete including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class D/wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing &Fixing BP sheets 1.66mm to 2mm thick in ever board/facial/soffits ceiling i/c cutting fixing and welding to steel work.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 40 mm thick 2nd Class D/Wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing & fixing wire gauze shutters using galvanised M.S Wire gauge of average width aperature 1.4 mm in both direction with wire of 0.63 mm dia for door window and clerestory windows with hinges and necessary screw D Wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Kota stone slabs flooring over 25 mm thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete with base of cement motar 1:4 ( Cement :4 sand ) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: water thinable cement primer including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Finishing walls with weather proof water based acrylic Emulsion of apex asian paint/Nerolac paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 Sqm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Constructing manhole with R.C.C top slab in 1:2:4 mix ( 1 cement :2 sand:4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement :4 sand :8 graded stone aggregate 40mm nominaLl size), inside plastering 15mm thick with cement mortar 1:3( 1 cement :3 sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement :2 sand :4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing : with 200mm thick walls of brick masonary of approved quality in cement mortar 1:3 ( 1 cement :3 Sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing C.I pipes 100 mm dia (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F C.I Plain Bend 100 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F C.I Collar 100 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F C.I Door Tee 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing C.I pipes 150 mm dia (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F C.I Door Bend 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F C.I Door Bend 75 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F C.I Collar 150 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F CP Brass Bib Cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F CP Brass Angle cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F CP Brass Stop Cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing CP Brass towel rail complete with CP brass bracket fixed to wooden plug with CP Brass Chrome plate including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing CP/ S.S grating 100 mm dia Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and Fixing 32 mm dia CP waste pipe for wash basin or sink including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing water closet squatting pan (European type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing 10 liters vitreous china low level flushing cistern with a pair of C.I or mild steel brackets complete with flushing such as lead valve less syphon, 15 mm nominal size brass ball valve with polythene float CP brass handle unions and coupling for connections with inlet outlet and overflow pipes 40 mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe is to be measured and paid separately) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing plactic seat (Solid and hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers white plastic seat and cover including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F PVC Connection pipe 15 mm dia 45 cm long with Brass Union for wash basin & Sink including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing CP brass soap dish with CP brass bracket fixed to wooden cleats with brass screws chrome plate including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing S.S Pillar Cock for approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F C.P. Brass/ S.S Mixer for wash basion including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing water closet squatting pan (English type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing Liquid Soap dispensor of approved brand including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : in cement mortar 1:4 including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :100X58X1.90 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 125 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium handles hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 As Per is 1868) transparent or dyed to required colour and shade with necessary screws etc complete single rubber stooper including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 200 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F G.I / M.I union (15 mm nominal bore) (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F Gate Valve 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F float valve for water tank for approved brand manufacture and quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and Laying PVC pipes 100 mm dia (Heavy duty B Type) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F P.V.C. Door bend 100 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F PVC Collar 100 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F PVC Door Tee 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F PVC Plain Bend 100 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Provding and laying PVC Pipe 0.75 mm dia (heavy duty B Type) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F P.V.C. floor trap 75 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F PVC Gully trap 110 mm dia (Heavy duty) for approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
VEENESH THAKUR (BID ID -587749)
BHUPENDER SINGH CHANDEL (BID ID -587785)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.74 MB
Tendernotice_2.pdf
PDF • 0.70 MB
Tendernotice_3.pdf
PDF • 0.35 MB
BOQ_178714.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid