PERIODICAL SERVICES IN MD ACCN/ OTM ACCN AND WELCOME MAINT OF OFFRS MD ACCN AND INTERNAL ELECTRIFICATION AT EBS BABUGARH UNDER AGE B/R-II AND AGE E/M-I OF GE (NORTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed

M&L for non skid ceramic coloured tiles7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed

M&L for vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc, with neat cement slurry over and including 15 mm thick screed bed of cement mortar 1:6 including pointing in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc, with neat cement slurry on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as specified and directed.

S&F non skid ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.

S&F non skid ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matching shade and 10 mm thick rendering in cement mortar 1:4 for backing coat complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc complete all as specified and directed.

M&L for Makrana white marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, floors and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified and directed

M&L for 16mm-18mm thick black granite stone slab machine cut in floors, cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for 16-18mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry laid over and including 20mm thick cement and sand mortar 1:6 screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone 20-25mm thick as in riser of steps, skirting, dado and pillar laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:4 complete all as specified and directed

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed

S&F Non asbestos fibre cement ceiling board 4mm thick fixed to timber / GI / Aluminium frame work with screws/clips for ceiling flat or slope complete all as specified and directed

S&F Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified and directed

Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each complete all as specified and directed

S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly supplied and fitted to chowkats complete all as specified and directed

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.

S&F powder coated anodised aluminium ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick frosted glass complete all as specified and directed.

S&F mild steel window with side hung shutter incl projecting type hinges with steel handle and steel peg stay complete with glazing shutters complete with glazing bars and ply proof shutters without glazing bars,dovetailed or welded complete all as specified and directed

M&L for framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) not exc 0.5 sq.m from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

S&F Glazing with sheet, 3mm thick, ordinary quality and glazing with oil putty and glazing pins in squares exceeding 0.5 Sqm in each pane complete all as specified and directed

S & F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed

S&F Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a) complete all as specified and directed

M&L for galvanised wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

M&L for galvanised wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

S & F in repairs hollow PVC Wall Lining consisting of 5mm thick printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed.

M&L for 18/19mm thick WPC Solid board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated incl hinges, handles and knobs as requerment complete all as specified and directed.

S&F 150mm size aluminium alloy handles cast type anodized fixed with ss screw complete all as specified and directed

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer complete all as specified and directed

M&L for preparation of new or previously untreated wood surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer complete all as specified and directed

M&L for preparation of old steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel over one coat of primer complete all as specified and directed

M&L for preparation of old untreated wood surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer complete all as specified and directed

S&F aluminium anodised tower bolts 150mm long, of extruded section. fixed with ss screw complete all as specified and directed

S&F aluminium sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed

S&F stainless steel butt hinges 100mm in size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt with bright bolt 200 mm long complete all as specified and directed

S&F mild steel 150mm size helical door spring including roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed.

S&F, in repairs, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and directed

M& L for preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed

M & L for applying 15 mm thick rendering using ready mix plaster bags on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete incl WPC complete all as specified and directed

M & L for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified & directed.

M&L for preparation new plastered surface of wall two coat of Oil bound distemper over one coat chalk whitening using roller for painting complete all as specified and directed

M&L for applying 2mm thick wall care putty making smooth surface complete all as specified and directed.

M&L for removal of existing treatment of wall by mechanical complete all as specified and directed

M& L for preparing plastered Old surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed

M& L for preparing plastered new surfaces of walls and applying three coats of white wash complete all as specified and directed

M& L for preparation of old surfaces of walls including scrabing down smoke soots, moulds moss and treating oil and greasy spots etc plastered or unplastered surfaces of walls applying one coat of white wash/colour wash complete all as specified and directed

M& L for preparation of old surfaces of walls including scrabing down smoke soots, moulds moss and treating oil and greasy spots etc plastered or unplastered surfaces of walls applying two coat of white wash/colour wash complete all as specified and directed

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed

All as described srl item no 63 here-in-before but 20 mm bore pipe complete all as specified and directed

Supplying and laying of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed

S&F in repairs chromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repairs Floor 140mm over all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorcomplete all as specified and directed

S&F in repairs 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union complete all as specified and directed

S&F in repairs Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed

S&F in repairs iron 15 mm bore size Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repairs CP 15mm dia Pillar cock swan neck fixed with wash basin complete all as specified and directed

S&F in repairs vitreous china ware EWC with cistern combined complete with internal fittings complete all as specified and directed

S & F in repairs for CP Health Faucet steel body with wall hook and one meter SS braided rubber hose pipe complete all as specified and directed

S&F in repairs CP Toilet paper holder of steel conforming to the samples kept in the office complete all as specified and directed

S&F in repairs 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed

S&F in repairs 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repairs fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repairs chromium plated towel rail 20mm dia D type 600 mm long as a approved quality complete all as specified and directed.

S&F PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F in repairs, PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repairs PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing with Granite Stone and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repair CP chromium plated shower rose 125mm size complete all as specified and directed

S&F in repairs CP soap dish complete all as specified and directed

S &F in repairs Grating doom 100mm dia of CP complete all as specified and directed

S&F in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc and supply and fixing powder coated aluminium frame and stainless steel ring to hold 75mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified and directed

S&F in repais 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes and supply and fixing powder coated aluminium frame and stainless steel ring to hold 75mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified & directed.

S&F PVC bends 75mm bore, any radius complete all as specified & directed.

S&F PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed

S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed

S & F 25mm dia Stainless steel decorated curtain rod with braket and ring complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed

Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed

S&F for triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified and directed

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified and directed

S&F in repairs PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated or hinging device for EWC complete all as specified and directed

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

Dismantling, Asbestos cement (Plain,corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position unframed work complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self drilling and self tapping screws neoprene and EPDM washers complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified and directed.

S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 GDE Fe 410-W(Gde-E-165)quality B complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

Taking down copper/ aluminium point wiring (ligh, fan, bell, socket or power etc.) complete with all accessories like switches, sockets, regulators, ceiling roses, light fittings etc. for taking credit and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls / floors / ceiling etc complete all as specified and directed. NOTE-Industrial bldg height approx 30 feets and all T & P arrangements will be done at contractor end , no crane facility will be provided for any item in contract complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable FR-LSH ,ISI marked including PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, alongwith frame inner plate suitable for fixing moduler switches, sockets, regulator etc or with 3mm thick plastic laminated sheet top cover concealed in wall any height with and including continuous green earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as specified and directed for following:- Note :- The point wiring shall include the wiring of light/ outlets of any length from the distribution board via switch to the point.

All as described srl item no 112 here-in-before but one light point controlled by one way switch.

All as described srl item no 112 here-in-before but one light point controlled by 2-way switch.

All as described srl item no 112 here-in-before but one ceiling fan/ exhaust fan point controlled by one way switch.

All as described srl item no 112 here-in-before but one 3 pin socket outlet 6 Amps on the same board with other switches.

All as described srl item no 112 here-in-before but one 3 pin socket outlet 6 Amps on the Independent board.

All as described srl item no 112 here-in-before but one bell/ buzzer point controlled by one push button on the same board with other switches or independent.

All as described srl item No112 here-in-before but with 2.5 Sq mm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

All as described srl item No112 here-in-before but using 4 sqmm copper conductor for with 4 sqmm earth wire for one 20 amps socket outlet on independent board complete all as specified and as directed.

All as described srl item No112 here-in-before but for supply and drawing 1.5 sqmm copper conductor cable with one 1.5 sqmm continuous earth wire into existing conduit after taking out the existing wiring including replacement of required size of terminal box with 3mm thick bakelite sheet cover fixed with brass screws complete all as specified and as directed.

All as described srl item no 121 here-in-before but one light point / Fan point controlled by one way switch.

All as described srl item no 121 here-in-before but one light point controlled by 2-way switch.

All as described srl item no 121 here-in-before but one 3 pin socket outlet 6 Amps on the same board with other switches.

All as described srl item no 121 here-in-before but one 3 pin socket outlet 6 Amps on the Independent board.

All as described srl item no 121 here-in-before but one bell/ buzzer point controlled by one push button on the same board with other switches or independent.

All as described ser item No 121 here-in-before but for supply and drawing 2.5 sqmm copper conductor cable with one 2.5 sqmm continuous earth wire into existing conduit after taking out the existing wiring including replacement of required size of terminal box with 3mm thick bakelite sheet cover fixed with brass screws all as specified and as directed for one 16 amps socket outlet on independent board complete all as specified and directed.

S&F Modular Switch, 1 module, 6A, AC, 240V, one way complete all as specified and directed.

S&F Modular Switch, 1 module, 6A, AC, 240V, two way complete all as specified and directed.

S&F Modular Socket, 2 module, 6A, 3 pin combined, AC, 240V, complete all as specified and directed.

S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, complete all as specified and directed.

S&F Modular Switch, 1 module, 16A, AC, 240V, one way complete all as specified and directed..

S&F modular outer plate with inner plate frame 3 module suitable for modular switch & board complete all as specified and directed.

All as described srl item no 133 here-in-before but 4 module complete all as specified and directed.

All as described srl item no 133 here-in-before but 6 module complete all as specified and directed.

All as described srl item no 133 here-in-before but 8 module complete all as specified and directed.

All as described srl item no 133 here-in-before but 12 module complete all as specified and directed.

S&F in repairs modular metal flush box 3 module suitable for modular switch & board complete all as specified and directed.

All as described srl item no 138 here-in-before but 4 module complete all as specified and directed.

All as described srl item no 133 here-in-before but 6 module complete all as specified and directed.

S&F in repairs switch Piano, flush type single pole, one way 6 Amps complete all as specified and as directed.

S&F in repairs Switch Piano flush type two way 5 Amps complete all as specified and as directed.

S&F in repairs Switch Piano, flush type single pole, one way 16 Amps complete all as specified and as directed.

S&F in repairs Switch bell push 6 Amps flush type complete all as specified and directed.

S&F in repairs socket outlet 3 pin and 6 Amps flush type complete all as specified and as directed.

S&F in repairs socket outlet flush type 2 in 1, 3 pin , 6 and 16 Amps complete all as specified and as directed

S&F modular 5 Step Fan Regulator, 1/2 module, 120W, AC, 240V, complete all as specified and directed.

S&F non modular 5 Step Fan Regulator, 1/2 module, 120W, AC, 240V, complete all as specified and directed.

S&F in repairs ceiling rose PVC/ Polycorbonate insulated body with three terminals complete all as specified and as directed.

S&F in repairs bell, Ding Dong AC, 230 volts, SP complete all as specifeid and as directed.

S&F in repairs lamp holder, angular/ straight ,PVC / Polycarbonate type with batten back plate, AC, 240V, Pin type, complete all as specified and directed.

S & F in repairs 20 W surface / wall mounted,single rod 4 feet LED T-8 batten having luminous efficacy of ≥100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser,CRCA housing with white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. NOTE: The rate to be quoted by the contractor should be inclusive of the LED T-8 batten along with a 4 feet LED rod.

S&F in repairs Retrofit polycarbonate diffuser type 20 watt retrofit LED tube rod 4 feet,100Lm/Watt,CRI >80, PF >0.90, operating volatage 140- 240V complete all as specified and directed.

S & F in repairs 20 W surface / wall mounted, 4 feet LED T-5 batten industrial type having PC diffuser, luminous efficacy of ≥120 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection 4kV and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, housed in PC with white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz,50000Hr run including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S & F in repairs 10 W surface / wall mounted, 2 feet LED T-5 batten having PC diffuser, luminous efficacy of ≥100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in PC with white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S&F post top light any shape with opal acrylic diffuser,die cast aluminium bottom housing, IP65/66 suitable for outdoor including all the accessories required for fixing as per OEM recommendation all as specified and directed Note:- Contractor shall get prior approval of fitting from GE.

S&F in existing stand LED Bollard garden light cylindrical shape with opal acrylic diffuser IP65/66 suitable for outdoor IP65 including all the accessories required for fixingcomplete all as specified and directed. Note:- Contractor shall get prior approval of fitting from GE.

S&F in repairs, Wall mounting focus light with polycarbonate diffuser prewired incl 14/15 Watts LED lamp complete all as specified and directed.

S&F in repairs LED 10 watt (Bulk head light fitting) cast aluminium oval shape body finished with stove enameled & heat resistant oval shape designed clear /diffuser glass cover with rubber gasket.with wire mash guard complete all as specified and as directed.

S&F in repairs pressure die-cast alluminium housing 18 Watt LED flush / surface/reccesd mounting down light luminaire powder coated finish in round or square shape with integral electronic driver THD<10% complete all as specified and directed.

S&F in repairs pressure die-cast alluminium housing 12 Watt LED flush / surface/reccesd mounting down light luminaire powder coated finish in round or square shape with integral electronic driver THD<10% complete all as specified and directed.

S&F in repairs 25 Watt pewired pressure die cast housing LED bldg security light luminaire IP 66 ingress protection ,Efficacy 120lm/watt ,built-in surge protection,electronic driver incl suitable OD GI pipe bracket, mounting clamps with nuts, bolts and washers, electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture complete all as specified and directed.

All as described Srl item No 162 here-in-before but 35 Watts.

S&F in repairs LED Driver suitable for 2'x2' ceiling light 24/36/45 watts of any make or model , 240V complete all as specified and directed.

All as described srl item no 164 here-in-before but suitable for 12/18 Watts down lighter

S&F in repairs 15 watt LED bulb 2 pin B22 base,100 Lumems per watt,PF≥0.9, 180° wide beam angle voltage surge protection 4kV ,6500K cool white/warm white,operating voltage 100-240V complete all specified and directed.

All as described srl item no 166 here-in-before but 20 Watts.

All as described srl item no 166 here-in-before but 12 Watts

All as described srl item no 166 here-in-before but 9 Watts

All as described srl item no 166 here-in-before but 5/6 Watts

S & F in repairs 36W LED recessed mounted 2'X2' panel light having CRCA sheet housing, PC diffuser, luminous efficacy of 120 lumen/W, CRI > 80, PF ≥ 0.9, CCT 6500K/3000K, independent isolated SMPS based constant current electronic LED driver with THD < 15%,built-in surge voltage protection min 4kV and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, IP 20 protection, input voltage range 140- 270V , input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S & F in repairs 24W LED recessed mounted 2'X2' panel light having CRCA sheet housing, PC diffuser, luminous efficacy of 120 lumen/W, CRI > 80, PF ≥ 0.9, CCT 6500K/3000K, independent isolated SMPS based constant current electronic LED driver with THD < 15%,built-in surge voltage protection min 4kV and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, IP 20 protection, input voltage range 140- 270V , input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

M & L for submain wiring with two single core 4 sq mm nominal area with 1100 volt grade confirming to IS 694 (2010) PVC insulated unsheathed with one run of 4 sq mm multi stranded copper conductor cable (FRLSH) ISI marked for continuous green earth wire drawn in and including concealed rigid non-metallic PVC conduit (ISI mark) of size 25 mm or higher dia medium grade with all fitting marked including cutting, chasing for conduit and making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as specified and directed. Note:- Two runs of 4 Sqmm Cable and one run of 4 Sqmm cable together in & including PVC conduit shall be measured as one RM.

M & L for submain wiring with four single core 4 sq mm FRLSHnominal area for 3 phase & neutral with 1100 volt grade confirming to IS 694 (2010) PVC insulated unsheathed with one run of 4 sq mm multi stranded copper conductor cable (FRLSH) ISI marked for continuous green earth wire drawn in and including concealed rigid non-metallic PVC conduit (ISI mark) of size 19/20 mm dia medium grade with all fitting marked including cutting, chasing for conduit and making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as specified and directed. Note:- Four runs of 4 Sqmm Cable and one run of 4 Sqmm cable together in & including PVC conduit shall be measured as one RM.

M & L for submain wiring with two single core 6 sq mm nominal area with 1100 volt grade confirming to IS 694 (2010) PVC insulated unsheathed with one run of 6 sq mm multi stranded copper conductor cable (FRLSH) ISI marked for continuous green earth wire drawn in and including concealed rigid non-metallic PVC conduit (ISI mark) of size 25 mm or higher dia medium grade with all fitting marked including cutting, chasing for conduit and making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as specified and directed. Note:- Two runs of 6 Sqmm Cable and one run of 6 Sqmm cable together in & including PVC conduit shall be measured as one RM.

M & L for submain wiring with four single core 6 sq mm FRLSHnominal area for 3 phase & neutral with 1100 volt grade confirming to IS 694 (2010) PVC insulated unsheathed with one run of 6 sq mm multi stranded copper conductor cable (FRLSH) ISI marked for continuous green earth wire drawn in and including concealed rigid non-metallic PVC conduit (ISI mark) of size 19/20 mm dia medium grade with all fitting marked including cutting, chasing for conduit and making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as specified and directed. Note:- Four runs of 6 Sqmm Cable and one run of 6 Sqmm cable together in & including PVC conduit shall be measured as one RM.

M & L for submain wiring with two single core 10 sq mm nominal area with 1100 volt grade confirming to IS 694 (2010) PVC insulated unsheathed with one run of 10 sq mm multi stranded copper conductor cable (FRLSH) ISI marked for continuous green earth wire drawn in and including concealed rigid non-metallic PVC conduit (ISI mark) of size 25 mm dia medium grade with all fitting marked including cutting, chasing for conduit and making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as specified and directed. Note:- Two runs of 10 Sqmm Cable and one run of 10 Sqmm cable together in & including PVC conduit shall be measured as one RM.

M & L for submain wiring with four single core 10 sq mm FRLSHnominal area for 3 phase & neutral with 1100 volt grade confirming to IS 694 (2010) PVC insulated unsheathed with one run of 10 sq mm multi stranded copper conductor cable (FRLSH) ISI marked for continuous green earth wire drawn in and including concealed rigid non-metallic PVC conduit (ISI mark) of size 25 mm or higher dia medium grade with all fitting marked including cutting, chasing for conduit and making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as specified and directed. Note:- Four runs of 10 Sqmm Cable and one run of 10 Sqmm cable together in & including PVC conduit shall be measured as one RM.

S&F in repairs, including clamping and fixed to wall / pole / channels, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables with stranded aluminium conductor, 1100 volts grade, 6 Sqmm 2 core complete all as specified and directed.

All as described Srl item No 179 here-in-before but 10 Sqmm 2 core

All as described Srl item No 179here-in-before but 16 Sqmm 2 core

All as described Srl item No 179 here-in-before but 16 Sqmm 4 core

S&F in repairs metallic Enclosure, SPN double door DB, IP43, door earthing,isolated neutralbar ,240V, AC, 4 way, with 200 Amps rated busbar complete all as specified and directed.

All as described Srl item No 183 here-in-before but 08 way

All as described Srl item No 183 here-in-before but 12 way

All as described Srl item No 183 here-in-before but TPN DB, vertical mounting, 415V, 4way with 200Amps rated busbar, double door.

All as described Srl item No 183 here-in-before but VTPN DB, incomer MCCB type, 415V, 4way with 200Amps rated busbar, double door.

S&F in repairs, 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16KA with Thermal - Magnetic Released complete all as specified and directed.

All as described Srl item No 188 here-in-before but 100Amps 16KA

S&F in repairs MCB TPN 40 to 100 Amps,10kA, 415 volts, 'C' series, 50 Hz suitable for fixing in MCB DB, complete all as specified and as directed.

S&F in repairs MCB SPN 40 to 63 Amps, 10 kA, 415 volts, 'C' series 50 Hz suitable for fixing in MCB DB complete all as specified and as directed.

S&F in repairs MCB SPN 32 Amps, 10 kA, 415 volts, 'C' series, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S&F in repairs MCB SP 6-32 Amps, 10 kA, 415 volts, 50 Hz suitable for fixing in MCB DB 'B' series complete all as specified and as directed.

S&F in repairs MCB SP 6-32 Amps, 10 kA, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S&F in repairs Isolator DP, 40A, AC, 240V, ISI/CE Marked conforming to IEC 60947-3,biconnect terminals complete all as specified and directed.

All as described Srl item No 195 here-in-before but 63A

S&F in repairs Isolator 4P, 63A, AC, 415V, complete all as specified and directed.

Taking down unserviceable plug and socket of any description, supply and fix sheet metal enclosure with single pole and neutral with two pin and earth plug and socket along with a 20 to 30Amps rated SP MCB, 230 volt, 50 HZ as required at site, complete all as specified and as directed.

S&F in repairs modular Power Unit 32 A, 3pin, AC, 240V ISI Marked incl PVC Box complete all as specified and directed.

S&F in repairs condenser 2.5 MFD suitable for ceiling/ Exhaust fan complete all as specified and as directed. Make : Havells/Tibcon

S&F in repairs condenser 3.15 / 4 MFD suitable for ceiling/ Exhaust fan complete all as specified and as directed. Make : Havells/ Tibcon

Supply only insulation tape roll 20 mm wide 15 Mtr long ISI mared all as directed. Make: Steelgrip / Kinjal / Anchor complete all as specified and directed.

S&F in repairs Water heater storage type steel body with copper inner tank and heating element upto 2KW capacity 25 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty complete all as specified and directed.

S&F in repairs Water heater storage type steel body with copper inner tank and heating element upto 2KW capacity 50 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty complete all as specified and derected.

Carrying out Electrical maint work of day to day Internal Electric or Fans or Geysers or Solar Water Heaters complaints such as repair / rectification / replacement of defective items like wiring, cables, switches, sockets,holders, ceiling rose, call bells, condensers,tube rods,fittings,fixtures,LED drivers,MCB's, MCCB's ,DB's, Heating Elements,Thermostats, Hot water connections etc. by providing skilled Technician at any location under GE (North) Meerut AoR complete all as specified and directed (Store required will be provided seperately)

S&F in replacement of PVC water disributer 3 way with PVC pipe 15 mm with 15 mm dia flexible braided OD for Desert cooler of any size/capacity complete all as specified and directed

S&F in replacement of Sumersible pump 18 watt, 230V, single phase for Desert cooler of any size/capacity complete all as specified and directed

S&F in replacement of wood wool pad for desert cooler of suitable size in wire net complete weight not less than 450 gms. ( set of three ) complete all as specified and directed

S&F in replacement fan motor copper wounded suitable for desert cooler 230 Volts, 50HZ, single phase, Heavy duty, AC supply four speed 180 watts of 450 mm sweep complete with fan blade and legs complete all as specified and directed

S&F in repairs, PVC fresh air fan, 300mm sweep with louvers, AC, 230V incl T/D old u/s one and depositing to MES complete all as specified and directed

S&F in repairs PVC exhaust fan, 250mm sweep with lovers, AC, 230V incl taking down old u/s one and depositing to MES complete all as specified and directed

S&F in repairs metal exhaust fan, 300mm sweep with lovers/bird guard, AC, 230V incl taking down old u/s one and depositing to MES complete all as specified and directed.

S&F in repairs wall mounted fan 400mm sweep, smooth oscillation,3 speed control,copper winded motor ,electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture complete incl taking down old u/s one and depositing to MES Storeyard complete all as specified and directed

S&F in repairs/ replacement copper cable 1100 volts grade with multi-stranded copper conductors of size 1.5 Sqmm complete all as specified and as directed

S&F in repairs/ replacement copper cable 1100 volts grade with multi-stranded copper conductors of size 2.5 Sqmm complete all as specified and as directed

S&F in repairs/ replacement copper cable 1100 volts grade with multi-stranded copper conductors of size 4.0 Sqmm complete all as specified and as directed

S&F in repairs/ replacement PVC insulated copper cable 1100 volts grade twin twisted flexible conductor 23/0.76 complete all as specified and as directed

S&F in repairs PVC insulated copper cable 1100 volts grade twin twisted flexible conductor 40/0.60 complete all as specified and as directed

S&F in repairs/ replacement Temper proof digital energy meter Single Phase 230 volts of capacity 5-30A complete all as specifeid and as directed. NOTE: Taken down unsv Electric meter of any description will be deposited in E/M store.

S&F in repairs/ replacement Temper proof digital energy meter three Phase 415 volts of capacity 10-40A complete all as specifeid and as directed. NOTE: taken down unsv Electric meter of any description will be deposited in E/M store.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 4.0 mm galvanized iron wire as earth lead, extended upto 7.5 m or upto test terminal point, drawn through 15mm dia med. gr. GI pipe for protection of galvanized iron wire in the ground, further connecting with suitable size of earthing lead to Distribution boards etc., including excavation, earth work, Charcoal & Salt all as specified, PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I, complete all as specified and as directed. NOTE: GI Pipe for protection of earthing strip and earth strip beyond 7.5m or test point shall be measured and paid seperately under relevant items.

Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, painting with synthetic enamel paint by spraying including reassembling blades and hanging ceiling fan including connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose fan connector complete all as specified and as directed.

All as described srl item no 222 here-in-before but exhaust fans of any sweep complete all as specified and as directed.

Dismantling the unserviceable bearing and supply and fix sealed bearing suitable for the existing Ceiling fans / exhaust fans complete all as specified and as directed.

Dismantling the unserviceable Gun metal bush supply and fix gun metal bush suitable for existing wall mounted/ pedestal/ exhasut fans complete all as specified and as directed.

Dismantle the unserviceable shackle assembly comprising GI bolts, nuts, rubber bush and split pin complete all as specified and as directed.

M&L for removing the defective fan winding of any material and rewinding with super enamelled copper wire of existing (or higher gauge, in case where winding is of any other material), applying insulation varnish, pre heating and binding with empire tubes, crimple sheet, etc. as required for rewinding, replacement of body screws, and after that, testing and commissioning on full load for 4 hrs continuous running in the presence of MES maintenance incharge, complete all as specified and directed.

All as described srl item no 227 here-in-before but ceiling fan of size upto 1200/1400 mm sweep.

All as described srl item no 227 here-in-before but Exhaust fan of size 350 to 450mm Sweep.

All as described srl item no 227 here-in-before but Exhaust fan of size upto 300 mm Sweep.

Taking down the electric Geyser of capacity 25 ltrs/ 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections, dismantling the unit, painting with one coat of synthetic enamel paint and refixing in its original position and reconnecting the inlet/ outlet water pipes and testing on completion complete all as specified and as directed.

S&F in repairs, suitable for single phase, 230 Volts, 50 Hz for existing type electric Geyser of capacity 25/50 ltrs including taking down unsv spares items complete all as specified and as directed of following items:-

All as described srl item no 232 here-in-before but Geyser heating element 1500 / 2000 watts push/ thread type porcelain / Circular / triangular type as required at site.

All as described srl item no 232 here-in-before but Thermostat as per the existing type at site.

All as described srl item no 232 here-in-before but Thermostate controller of existing type at site.

All as described srl item no 232 here-in-before but Indication lamp red/ green.

All as described srl item no 232 here-in-before but Aperture plate assembly complete for the geyser of capacity 25 ltr

All as described srl item no 232 here-in-before but Aperture plate assembly complete for the geyser of capacity 50 ltr

Taking down the electric geyser of capacity 25 Ltrs / 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, dismantling the unit, taking out the inner leaking copper shell, brazing the copper shall, testing for leaks, re-assembling the geyser including provision of additional glasswool as required, refixing in position, testing for functionality and commissioning complete all as specified and as directed.

Taking down unserviceable PVC connection of any description and supply and fix new PVC connection 15mm dia 450mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water complete all as specified and as directed.

Taking down unserviceable PVC connection of any description and supply and fix new PVC connection 15mm dia 600mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water complete all as specified and as directed.

Servicing of Solar water Heater of any capacity complete by cleaning solar panel with suitable cleaning agent complete all as specified and as directed.

S&F in repairs Solar water heater heating element of capcity 3 KW, single phase, 230 Volts, 50 Hz for existing type Solar water geyser including taking down unsv spares complete all as specified and as directed.

Disconnect and remove of unserviceable starting relay and Supply and fixing new starting relay suitable for existing model of following cooling appliances complete all as specified and as directed.

All as described srl item no 244 here-in-before but Water cooler of capacity upto 150 Ltrs

All as described srl item no 244 here-in-before but Refrigerator/ deep freezer of capacity upto 310 Ltrs

Disconnect and remove unserviceable over load protector and supply and fixing new overload protector (OLP) suitable for existing model of following cooling appliances complete all as specified and as directed.

All as described srl item no 247 here-in-before but Water cooler of capacity upto 150 Ltrs

All as described srl item no 247 here-in-before but Refrigerator/ deep freezer of capacity upto 310 Ltrs

Disconnect and remove unserviceable thermostat and supply and fix new thermostat suitable for existing model of following cooling appliances complete all as specified and as directed.

All as described srl item no 250 here-in-before but Water cooler of capacity upto 150 Ltrs

All as described srl item no 250 here-in-before but Refrigerator/ deep freezer of capacity upto 310 Ltrs

Disconnect and remove unserviceable starting capacitor and supply and fix new starting capacitor suitable for existing model of following cooling appliances complete all as specified and as directed.

All as described srl item no 253 here-in-before but Water cooler of capacity upto 150 Ltrs

All as described srl item no 253 here-in-before but Refrigerator/ deep freezer of capacity upto 310 Ltrs

Disconnect and remove unserviceable running capacitor and supply and fixing new running capacitor suitable for existing model of following cooling appliances complete ass as specified and as directed.

All as described srl item no 256 here-in-before but Water cooler of capacity upto 150 Ltrs

All as described srl item no 256 here-in-before butRefrigerator/ deep freezer of capacity upto 310 Ltrs

Disconnect and remove of unserviceable compressor and supply and fix new sealed rotary/ reciprocating compressor, including brazing the suction/discharge lines suitable for existing model of following cooling appliances, filling the gas and testing on all as specified and as directed

All as described srl item no 259 here-in-before but Water cooler of capacity 40/80 Ltrs

All as described srl item no 259 here-in-before but Water cooler of capacity 60/120 Ltrs

All as described srl item no 259 here-in-before but Refrigerator/ deep freezer of capacity upto 165 Ltrs

All as described srl item no 259 here-in-before but Refrigerator/ deep freezer of capacity 310/320 Ltrs

M&L for Checking of leakage of the following cooling appliances by putting the nitrogen pressure, identifying the leaks / defects ,repairing the same by brazing/ welding of bottom leg supports and testing and vaccuumising the system and charging suitable refrigerant gas and oil in desired level complete all as specified and as directed.

All as described srl item no 264 here-in-before butWater cooler of capacity 40/80 Ltrs

All as described srl item no 264 here-in-before but Water cooler of capacity 60/120 Ltrs

All as described srl item no 264 here-in-before but Refrigerator/ deep freezer of capacity upto 165 Ltrs

All as described srl item no 264 here-in-before but Refrigerator/ deep freezer of capacity 310/320 Ltrs

Taking down the corroded body of water cooler of any capacity, tinkering the corroded sheet metal parts, bottom base, angle iron frame, fan motor base plate, side covers, legs, door etc. with appropriate gauge MS sheet, angles by welding and brazing, renewal of nuts and bolts sheets metal screws, re-assembling, preparing the surface and painting with two coats of synthetic enamel paint over a coat of zinc chrome primer including renewal of door gasket where ever required complete all as specifeid and as directed.

Taking out unserviceable waste water tray of any description and supply and fixing new steel waste water tray suitable for existing water coolers complete all as specified and as directed.

Taking out unserviceable ball valve assembly and supply and fixing new PVC ball valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of size 15 mm dia bore suitable for water coolers / desert coolers complete all as specified and as directed.

Taking out unserviceable push button tap and supply and fix new chromium plated push button tap of size 15 mm dia bore suitable for water cooler complete all as specified and as directed.

Taking out unserviceable stop valve of any description and supply and fixing new stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of size 15mm dia complete all as specified and as directed.

Taking out unserviceable PVC waste water pipe from Water cooler and supply and fixing new PVC waste water pipe of suitable size complete all as specified and as directed.

Taking out unserviceable plug top of any description and supply and fixing new plug top 3 pin 15 Amps single phase 230 volts complete all as specified and as directed.

Taking out unserviceable plug top of any description and supply and fixing new plug top 3 pin 5 Amps single phase 230 volts complete all as specified and as directed.

Disconnect and remove unserviceable copper cable of any description and supply and connect new PVC insulated and PVC round sheathed 3 core, 1.5 Sqmm Copper conductor cable, heavy duty, 1100 Volts grade all as specified and as directed.

Disconnect and remove unserviceable copper cable of any description and supply and connect new PVC insulated and PVC round sheathed 3 core, 2.5 Sqmm Copper conductor cable, heavy duty, 1100 Volts grade all as specified and as directed.

Disconnect and remove unserviceable electronic voltage stablizer of any description and supply and fixing automatic electronic voltage stabilizer of capacity 5.0 KVA having features such as Intelligent time Delay system, Low and High Voltage Cut-off Protection, latest IC Technology to protect from power fluctuations, Thermal over load protection, wide input variation between 170V to 270V with output voltage stablized at 220 to 240V, with accuracy of +/- 2.5% and of following capacity suitable for Water cooler/ Refrigerator etc. complete all as specified and as directed.

Disconnect and remove unserviceable electronic voltage stablizer of any description and supply and fixing automatic electronic voltage stabilizer of capacity 5.0 KVA having features such as Intelligent time Delay system, Low and High Voltage Cut-off Protection, latest IC Technology to protect from power fluctuations, Thermal over load protection, wide input variation between 90V to 300V with output voltage stablized at 220 to 240V, with accuracy of +/- 2.5% and of following capacity suitable for Water cooler/ Refrigerator etc. complete all as specified and as directed.

Disconnect and remove unserviceable electronic voltage stablizer of any description and supply and fix automatic electronic voltage stabilizer of capacity 4.0 KVA having features such as Intelligent time Delay system, Low and High Voltage Cut-off Protection, latest IC Technology to protect from power fluctuations, Thermal over load protection, wide input variation between 170V to 270V with output voltage stablized at 220 to 240V, with accuracy of +/- 2.5% and of following capacity suitable for Water cooler/ Refrigerator etc. complete all as specified and as directed.

Disconnect and remove unserviceable electronic voltage stablizer of any description and supply and fixing automatic electronic voltage stabilizer of capacity 4.0 KVA having features such as Intelligent time Delay system, Low and High Voltage Cut-off Protection, latest IC Technology to protect from power fluctuations, Thermal over load protection, wide input variation between 90V to 300V with output voltage stablized at 220 to 240V, with accuracy of +/- 2.5% and of following capacity suitable for Water cooler/ Refrigerator etc complete all as specified and directed.

S&F in repairs BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with motor complete all as specified and directed.

High Tech Metal India (BID ID -3435922)