Development work as CC Road, Plinth Protection, UG Sump, Sedimentation Bore well with motor, 1 No.10000, 1 No. 5000 liters OHT, Filling low lying area, Ext. Electrical, water supply for DFO office building, fire station cum Garage at Cuddalore Dist

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

30 : Ellispattern

41 : Painting - New "iron work"

53.3 : S&F of C.I Steps (5kg weight )

238 : Anticorrosive treatment for steel grills

ANNEXURE-I 2.1.1 : Supplying and filling with gravel

2.1.3 : Filling sand (using crushed stone sand)

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1: P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture

8.3.1.1 : Standardised concrete Mix M30 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

e) In Third Floor

10.5.1 : Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) (using crushed stone sand) with admixture a. In Foundation and basement

16.1.2 : Precast Jally Ventilator 50mm thick. Using standardised M30 grade concrete Mix withouty vibrating charges. (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Verticall wall

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasriciser

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2: Special Ceiling plastering in C.M. 1:3,10 mm tk.(using crushed stone sand) including plasticizer

38.7 : Plastic Emulsion PAINT including primer for inner walls

43.1.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(using PVC insulated binding wire)

50.2.1: Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

71.3: Supplying and fixing of 63Amps triple pole main switch with fuse and neutral link

98.3.2 : TW panelled single door shutter (without brass fittings) b. 900 x 2400mm. (Single leaf)

ANNEXURE-II A1: Supplying & fixing of Terra cotta jolly (more than 50mm upto 110mm) a. In Ground Floor

b. In First Floor

A2: Providing nosing to the edges of Granite slab Double Nosing

A3: Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

A4: Drilling of Borewell 165mm of dia and anywhere in Cuddalore District. a) Upto 76m Depth ending below ground level

b) From 76m upto 91m Depth ending from ground level

c) From 91m upto 107m Depth ending from ground level

d) From 107m upto 122m Depth ending from ground level

e) From 122m upto 240m Depth ending from ground level

A5: Reaming from 140/150mmm pilot bore to 300 mm dia bore as directed by the departmental officers. a) Upto 60 m depth ending below ground level

b) From 60 m depth and upto 90 mt depth ending below ground level

c) From 90 m upto 120 mt depth ending below ground level

d) From 120 m upto 150 mt depth ending below ground level

e) From 150 m upto 180 mt depth ending below ground level

f) From 180 m upto 210 mt depth ending below ground level

g) From 210 m upto 240 mt depth ending below ground level

A6: Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., all complete.

A7: Supply and delivery of the following dia PVC heavy duty casing pipes of 15 kg/cm2 and necessary special of best approved quality etc., all complete a) 165mm dia outer PVC Plain pipes

b) 165mm dia outer PVC slotted pipes

c) 165mm dia outer PVC bottom dummy

A8: Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by departmental Officers and conducting yield test by 'V' notch method.

A9: Supply of 3 Phase 7.5 HP Submersible Pump set with duty of 50 x 225 lpm x m suitable for 150 mm dia borewell without Panel board.

A10: Supply and delivery of 3 HP Open well Submersible pump set (Duty 50 lpm x 100m)

A11: Supply & fixing of Panel board for 3H.P Open well submersible motor with two level guard auto start with ISI mark

A12: Supply & fixing of Panel board for 7.5 H.P Submersible Pump set with two level guard auto start with ISI mark .

A13: Supply and laying of 3 core of 4 Sqmm submersible PVC Flat cable including cost of all materials etc., all complete.

A14: Labour Charges for erection of 7.5 HP Submersible Motor with proper clamps upto the starter. above 5.HP to 10 HP

A15: Labour Charges for erection of 3.00 HP open well Submersible Motor . Upto 5.HP

A16: Supply of 50mm dia UPVC column pipe threaded pipe approved quality with ISI mark

A17: Supply & Fixing of borewell MS Clamp sets suitable for 150mm dia borewell etc., all complete

A18: Supply & delivery of Nylon Rope of best and approved quality with ISI mark

A19: Supplying and fixing of 32mm dia adopter (SS) for connecting submersible pumpset with UPVC pipe etc.

A20: Supplying and laying of following GI pipe "B" class with ISI mark. (Above Ground Level) a. 80mm dia GI "B" Class pipe

b. 50mm dia GI "B" Class pipe

A21: Supplying and laying of following GI pipe B class with ISI mark (Below Ground Level) a. 100mm dia GI "B" Class pipe

b. 80mm dia GI "B" Class pipe

A22: Supplying and fixing of following dia GI specials with ISI mark of best approved quality a) 80mm dia GI bend

b) 80mm dia GI Coupling

c) 80mm dia GI Elbow

d) 80mm dia GI Hex Nipple

e) 80mm dia GI Union

f) 50mm dia GI Elbow

g) 50mm dia GI Hex Nipple

h) 50mm dia GI Union

i) 50mm dia GI Bend

j) 50mm dia GI Tee

k) 50mm dia GI Coupling

l) 80mm dia GI Non return valve

m) 50mm dia GI Non return valve

n) 80mm dia Gun metal Gate valve

o) 50mm dia Gun metal Gate valve

p) 32mm dia Gun metal Gate valve

A23: Supplying, laying, fixing and jointing the following ASTM pipes (Below ground level) a) 50mm Dia UPVC pipe below GL

A24: Supplying and fixing of following dia UPVC specials of best and approved quality having ISI mark a) 50mm dia UPVC elbow

b) 50mm dia UPVC Tee

c) 50mm x 40mm dia PVC Reducer

A25: Supplying of 25mm dia PVC pipes 10 Kg/cm2 including all specials etc., all complete.

A26: Labour charges for laying and jointing the PVC pipes as per 10 kg/ cm², 150 mm thickness and etc., all complete.

A27: Supplying of following LTUG Cable from meter board to fornt of the block and EB pole top for EB service connection etc.., a) 3.5 core 95 sqmm LTUG cable

b) 3.5 core 25 sqmm LTUG cable

A28: Labour charges for laying of LTUG cable above G.L including fixing of clamps etc., all complete. a) 3.5 core 95 sqmm LTUG cable

A29: Labour charges for laying of LTUG cable below G.L including fixing of clamps etc., all complete. a) 3.5 core 95 sqmm LTUG cable

A30: Supply & fixing of Crimping lugs suitable for following PVC armoured LTUG cable a) Lugs suitable for 95.0 Sqmm UG cable

A31: Supply & fixing of Cable gland suitable for following PVC armoured LTUG cable etc., all complete. a) Cable gland suitable for 95.0 Sq mm UG Cable

A32: Supplying and fixing 3 Nos. 63Amps 500 volts porcelain fuse unit

A33: Supply and erection of 200Amps capacity floor mounting DB panel board (Cubical type) with bus bar chamber made up of 14/16 SWG CRCA sheet selenium indoor cubical dust and vermin proof, door ruber arresting for 3 phase 4 wire system with 25mm x 6mm tin coated copper flats for phases and neutral (for power Room)

A34: Supply and erection of 200Amps capacity 440V 50Hz floor mounting LT panel board (Cubical type) with bus bar chamber made up of 14/16 SWG CRCA sheet selenium indoor cubical dust and vermin proof, door ruber arresting for 3 phase 4 wire system with 25mm x 6mm tin coated copper flats for phases and neutral (for EB Room)

A35: S&F of SINGLE PHASE 4 way DISTRIBUTION BOARD WITH MCBs 4 way vertical SPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links 4 ways single phase DB (Higher end) No. of ways incomer MCB / Isolator - 2 No. of ways incomer ELCB / RCD - 2 No. of outgoings ways - 2

A36: S&F of SINGLE PHASE 8 way DISTRIBUTION BOARD WITH MCBs 8 way vertical SPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links 8 ways single phase DB (Higher end) No. of ways incomer MCB / Isolator - 2 No. of ways incomer ELCB / RCD - 2 No. of outgoings ways - 6

A37: S&F of VERTICAL THREE PHASE 4 way DISTRIBUTION BOARD WITH MCBS 4 way vertical TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links 4 ways 3 phase DB (Higher end) No. of ways incomer MCB / Isolator - 4 No. of ways incomer ELCB / RCD - 4 No. of outgoings ways - 12

A38: Supplying and fixing of following size of TNPHC Emblem & Aluminium Dye casting letters a) 15" Height TNPHC Emblem

b) 9" dia Aluminium Dye casting letters

A39: Supplying of 6 lever Navatal lock with 3 keys with ISI mark etc., all complete.

A40: Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity

A41: Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher

A42: Supply and installation of copper flat size 25 mm x 3 mm run on the external wall

A43: Supplying and laying of Hand drwan copper conductor 8 Gauge on wall/below ground level

A44: Supply and installation of copper plate of size 300 X 300 X 6mm thickness.

A45: Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.

A46: Supplying and fixing of 8mm tk calcium silicate board designed and perforated for false ceiling.

A47: Providing cornice work for GYP Board false ceiling

A48: Supply, delivery & fixing of Split type Air conditioner 2 Ton, 2HW, 180A, 3 Star with 10 feet of copper tube

A49: Supply and fixing of Copper Refrigerant Piping of 7/8" dia for Split type Air conditioner of 2 Ton best and approved quality

A50: Supply and fixing of MS stand for fixing outdoor unit, including cost of all materials etc., all complete and as directed by the Departmental Officers

A51: Providing Ordinary Vertical blinds for windows.

A52: Supplying and fixing of 18W LED Fitting (3000K Round type recessed fittings with LED)

A53: Supplying and fixing of Gong bell 12'' size suitable for 250V

A54: Supplying and fixing of 160mm dia SWR pipe (Type-A) for rain water pipe line arrangements

A55: Supply and Laying of Granite tile of 10mm thk (wall Cladding) in C.M 1:2 Incl. Cost of Materials, Labours etc., all Including (Ruby Red or Satheleri Grey or Jet Blacky ) for lift potion

A56: Supplying and fixing of green chalk board of size 4'x3' feet

BHARATH BUILDING CONSTRUCTION