REPAIR AND MAINTENANCE OF VARIOUS TYPE OF CENTRIFUGAL SUBMERSIBLE TUBEWELL PUMP SETS DIFFERENT PUMP SETS OF FOUNTAINS AND OTHER CONNECTED WORKS OF EXTERNAL WATER SUPPLY IN THE AREA OF AGE EM II UNDER GE AF SUBROTO PARK

Amount

Dismantling & taking out open well submersible pump sets installed at water storage tank of fountains and booster pump sumps of capacity 2 to 15 HP after disconnecting all electrical connections and refixing the same in its original position after carrying out repairs / rewinding over hauling cleaning of impellers strainers including reconnection of all electrical connections etc complete all as specified and as directed by Engineer-in-charge. Note : - Repairs carried out / parts replaced shall be paid seperately under relevent items

M&L for transportation of open well centrifugal type submersible pump set of capacity 10.0 HP to 15 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring complete ( other spares required for motor will be measuerd and paid under relevant item ) all as specified and as directed by Engineer-in-charge.

M&L for transportation of open well centrifugal type submersible pump set of capacity 5 HP to 7.5 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring complete( other spares required for motor will be measuerd and paid under relevant item ) all as specified and as directed by Engineer-in-charge.

M&L for transportation of open well centrifugal type submersible pump set of capacity 2.0 to 4.0 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring complete( other spares required for motor will be measuerd and paid under relevant item ) all as specified and as directed by Engineer-in-charge.

S&F in replacement of SS coupling for 5 HP to 7.5 HP submersible pump set complete all as specified and as directed by Engineer-in-charge

S&F in replacement of gland suitable for 5 HP to 7.5 HP submersible pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of casing ring suitable for 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of shaft sleevesof existing material for 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of wear ring suitable for capacity 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of mechanical seal suitable for 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of gaskets suitable for 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of impeller for existing material suitable for 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of SS coupling up to 10 HP to 15 HP submersible pump set complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of gland suitable for 10 HP to 15 HP submersible pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of casing ring suitable for 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of shaft sleevesof existing material for 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of wear ring suitable for capacity 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of mechanical seal suitable for 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of gaskets suitable for 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of impeller of existing material suitable for 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of SS coupling suitable for 2 HP to 4.0 HP submersible pump set complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of gland suitable for 2 HP to 4 HP submersible pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of casing ring suitable for 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of shaft sleeves of existing material for 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of wear ring suitable for capacity 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of mechanical seal suitable for 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of gaskets suitable for 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of impeller of existing material suitable for 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement gun metal bush bearing of any number/Model suitable for 5 HP to 15 HP open well submersible pump (Bearing make shall be of SKF/NBC) complete all as specified and as directed by Engineer-in-charge.

S&F in replacement gun metal bush bearing of any number/Model suitable for 2 TO 4 HP open well submersible pump (Bearing make shall be of SKF/NBC) complete all as specified and as directed by Engineer-in-charge.

Dismantling of water fountain ring made out of MS / GI pipe of 40 to 80mm dia and refixing the same in its original position after cleaning / repairing like welding work etc complete all as specified and directed by Engineer-in-charge

Dismantling of Blocked nozzles fixed on various fountain and refixing after cleaning / servicing and setting by trial and error complete all as specified and as directed by Engineer-in-charge

S&F in replacement fountain nozzle (adjustable) of size 12mm brass Model FNCF-12B complete all as specified and as directed by Engineer-in-charge.

S&F in replacement fountain nozzle (adjustable) of size 15mm brass complete all as specified and as directed by Engineer-in-charge.

S&F in replacement fountain nozzle (adjustable) of size 20mm brass complete all as specified and as directed by Engineer-in-charge.

S&F in replacement fountain nozzle (adjustable) of size 25mm brass complete all as specified and as directed by Engineer-in-charge.

S&F in replacement dandelion fountain nozzle (adjustable) brass as per existing size and model complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Porcelain 2 pin holder complete all as specified and as directed by Engineer-in-charge.

Dismantling of 12mm dandelion aluminium tubes and nozzles etc cleaning of tubes & nozzles and necessary repairs in the tubes / nozzles by carrying to civil workshop and refixing and setting by trial and error complete all as specified and as directed by Engineer-in-charge

S&F in replacement of Rubber packing ring suitable for under water light fittings complete all as specified and as directed by Engineer-in-charge

Supply & fixing in replacement wire netting of stainless steel wire 1.4mm dia size of mesh 12mm fixed to bend pipe dia 100mm to 200mm fixed with GI clamp including nuts and bolts etc complete all as specified and directed by Engineer-in-charge

S&F in replacement of constant voltage driver of capacity 10 amps 12 Volt complete all as specified and as directed by Engineer-in-charge. Make :- The Fountainers

S&F in replacement of constant voltage driver of capacity 15 amps 24 Volt complete all as specified and as directed by Engineer-in-charge. Make :- The Fountainers

M&L in replacement water proof joints for cable size 2.5/4/6 sqmm complete all as specified and as directed by Engineer-in-charge

S&F in replacement of angle adjustable stand for luminaries made of SS-304 materials complete all as per Sample for fountains.

S&F in replacement of Fountain light fitting 12 V 100 watts complete all as specified and as directed by Engineer-in-charge.

S&F in Replacement fountain light fitting 24 volt LED type 3 watt model F 21 complete all as specified and as directed by Engineer-in-charge. Make :- Fountainer (any colour)

S&F in Replacement fountain light fitting 24 volt multicolour 3W (7 colours) as per existing make & model complete all as specified and as directed by Engineer-in-charge.

Scrapping of old painting from complete fountain assembly made of MS / GI / Steel pipe and applying two coats of approved synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge

Dismantling of pressure pump set of Cap 0.5 HP to 1.0 HP from the existing site after disconnecting all electrical connections and refixing the same after carrying out repairs / rewinding of motor / overhauling of pump including transportation to local work shop & back complete all as specified and as directed by Engineer-in-charge. Note : - Spare parts replaced shall be paid seperately under relevant items

S&F in replacement of Air Tank for pressure pump set of capacity 0.5 HP 1.0 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Pressure gauge 0-10 Kg / SqCM complete all as specified and as directed by Engineer-in-charge. Make :- Danfos

S&F pressure control switch suitable for 0.5 HP pressure pump set complete all as specified and as directed by Engineer-in-charge. Make :- YAODA / RELI POWER

S&F in replacement gun metal non return valve of size 15mm bore complete all as specified and as directed by Engineer-in-charge. Make :- Sant complete

S&F in replacement gun metal non return valve of size 20mm bore complete all as specified and as directed by Engineer-in-charge. Make :- Sant complete

S&F in replacement gun metal non return valve of size 25mm bore complete all as specified and as directed by Engineer-in-charge. Make :- Sant complete

S&F in replacement gun metal non return valve of size 40mm bore complete all as specified and as directed by Engineer-in-charge. Make :- Sant complete

S&F in replacement gun metal non return valve of size 50mm bore complete all as specified and as directed by Engineer-in-charge. Make :- Sant complete

Repairs to fire hose cabinet including replacement of unserviceable broken glass, aluminium tower bolts door steples locks wooden pieces hold fastners connect work and painting to fire hose cabinet and writing necessary information of Hydrant including cement work as required at site complete all as specified and as directed by Engineer-in-charge

S&F in replacement of fire hydrant valve single headed of size 63mm bore complete all as specified and as directed by Engineer-in-charge. Make : Kartar / Sant

S&F in replacement of hose real drum 30m complete along with brass adopter for fixing in hydrant valve complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of RRL hose pipe 15m long complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of RRL hose pipe 30m long complete all as specified and as directed by Engineer-in-charge.

Dismantling & taking out defective parts of booster pump set centrifugal of capacity 2 HP to 5 HP and refixed after repairs / making complete serviceable by repairing / replacement of defective parts including tranportation to local work shop etc complete all as specified and directed by Engineer-in-charge. Note :- Parts replaced if any shall be paid under relevent items of the schedule

S&F in replacement of impeller for 2 HP to 5 HP cap booster pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of shaft sleeves for 2 HP to 5 HP cap booster pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of wear ring for 2 HP to 5 HP cap booster pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of CI bearing housing box for 2 HP to 5 HP cap booster pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of ball bearing of any make and number for 2 HP to 5 HP cap booster pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of cooling fan for 2 HP to 5 HP motor complete all as specified and as directed by Engineer-in-charge.

M&L for rewinding of Booster Pump set motor of capacity 2 HP to 3 HP with same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

M&L for rewinding of Booster Pump set motor of capacity 4 HP to 5 HP with same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

Dismantling & taking out defective parts of booster pump set of capacity 0.5 HP to 1.5 HP and refixed after repairs / making complete serviceable by repairing / replacement of defective parts including tranportation to local work shop etc complete all as specified and directed by Engineer-in-charge. Note : - Parts replaced if any shall be paid under relevent items of the schedule

M&L for rewinding of Booster Pump set of capacity 0.5 Hp to 1.5 HPwith same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

S&F in replacement od Running Capacitor 10.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement od Running Capacitor 25.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement od Running Capacitor 36.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement od Running Capacitor 50.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement od Running Capacitor 72.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement od Running Capacitor 125.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of ball bearing for 0.5 HP to 1.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F In Replacement CI Impeller Assy of Centrifugal mono block Pump set of capacity 0.5 HP to 1.5 HP as per sample (size varies depend upon the make and cap) complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement Decrin dozing pump Model No 96NG Q 51 , 100 PSI 40 GPD Capacity of make DECLIBAC

Supply and fix in replacement FRP TANK of Capacity 100 LTR with level gauge with agitator Motor ,connection shaft and mixing blade complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement Electric motor Single phase 50 HZ 1/8 HP assy Suitable to mount on decrin mixing tank along with agitator shaft and blade complete all as specified and as directed by Engineer-in-charge.

Supply in replacement connection pipe suitable for connecting to decrin dosing pump to Header( 2 Mtr long 8 mm internal dia) complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of circuit of speed of Dozing pump complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of injector Nozzle of Decrin dozing pump complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of Regulator Knob of dozing pump complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of power cord of dozing pump 2 mtr long plug top 5 AMP 240 volt AC complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of PVC pipe 25mm dia complete all as specified and as directed by Engineer-in-charge.

S&F fully reflective sign board made of 18mm gauge stainless steel sheet frame with 25mm stainless steel square pipe. The board shall be blue colour on base and provided datas of pump house location is to be written with retro reflective tape complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Phase sequence corrector suitable for 5 HP to 7.5 HP pump complete Make- Universal / Photron complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Phase sequence corrector suitable for 10 HP to 15 HP pump complete Make- Universal / Photron complete all as specified and as directed by Engineer-in-charge.

M&L for cleaning / maintenance of fountain, water body complete with cleaning solutions removing all the sludge /foreign particles all as specified and as directed by Engineer-in-charge

Dismantling of open well submersible pump set fitted in U/G sump of capacity up to 30 HP from water storage tank of fountains after disconnecting all electrical connections and refixing the same in its original position after carrying out repairs / rewinding over hauling cleaning of impellers strainers including reconnection of all electrical connections etc complete all as specified and as directed by Engineer-in-charge. Note : - Repairs carried out / parts replaced shall be paid seperately under relevent items

Rewinding of submersible motor 30 HP fitted in U/G sump of any make complete with equivilent gauge of copper winding wire, paper & sleeve, wooden stick, 'O' ring set & including replacement of incl taking out from the under ground sump and relowering the same after repair / replacement complete all as specified and directed by Engineer-in-charge. Note :- Parts to be replaced under this item shall be paid as supply only

Supply only thrust plate suitable for 30 HP submersible motor complete all as specified and as directed by Engineer-in-charge.

Supply only thrust bearing suitable for 30 HP submersible motor complete all as specified and as directed by Engineer-in-charge.

Supply only water cable seal suitable for 30 HP submersible motor complete all as specified and as directed by Engineer-in-charge.

Supply only Gun metal bearing suitable for 30 HP submersible motor complete all as specified and as directed by Engineer-in-charge.

Supply only SS rotor sleeves in 30 HP open well submersible motor of any make and type with complete nut, bolt & stufs, nut & flanged, upper & lower, studs & nuts complete all as specified and as directed by Engineer-in-charge

Supply only coupling suitable for 30 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only bush & sleeves for 30 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only SS pump Shaft for 30 HP open well submersible pump, complete all as specified and as directed by Engineer-in-charge.

Supply only in replacement of gun metal impeller with key complete suitable for 30 HP Open well Submersible pump all as specified amd as directed by Engineer-in-charge

Taking out defective submersible pump set 5 HP to 12.5 HP capacity from bore well along with column pipe of any size up to 80mm dia for making the submersible pump set serviceable / repairs to motor / repairs to pump set and re-lowering the complete pump set into the bore well completeincluding making necessary connection to the Electrical control pannel all as specified and as directed by Engineer-in-charge Note :- Repair carried out / items replaced shall be paid seperately in the appropriate items

Shifting to local work shop and Rewinding of submersible motor after cutting the burnt winding including cleaning slots and rewinding with equivilent gauge (as retrieved) of insulated copper winding wire and insulating material I.e PVC sleeves insulation paper , wooden sticks, 'O' ring for 5.0 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge Note :- Parts to be replaced under this item shall be paid as supply only

Shifting to local work shop and Rewinding of submersible motor after cutting the burnt winding including cleaning slots and rewinding with equivilent gauge (as retrieved) of copper winding wire and insulating material I.e PVC sleeves insulation paper , wooden sticks, 'O' ring for 10.0 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge Note :- Parts to be replaced under this item shall be paid as supply only

Supply only impeller of existing material suitable for 3 HP to 5 HP submersible pump set complete all as specified and as directed by Engineer-in-charge.

Supply only strainer suitable for 3 HP to 5 HP complete all as specified and as directed by Engineer-in-charge.

Supply only cable guard suitable for 3 HP to 5 HP complete all as specified and as directed by Engineer-in-charge.

Supply only pump sleevs suitable for 3 HP to 5 HP complete all as specified and as directed by Engineer-in-charge.

Supply only shaft suitable for capacity of 3 HP to 5 HP complete all as specified and as directed by Engineer-in-charge

Supply only bearing base plate suitable for 3 HP to 5 HP complete all as specified and as directed by Engineer-in-charge.

Supply only SS rotor sleeves for 3 HP to 5 HP complete all as specified and as directed by Engineer-in-charge.

Supply & fixing bearing bush for 3 HP to 5 HP complete all as specified and as directed by Engineer-in-charge.

Supply only thurst bearing complete suitable for 3 HP to 5 HP submersible pump all as specified and as directed by Engineer-in-charge

Supply only impeller of existing material suitable for 7.5 HP to 12.5 HP submersible pump set complete all as specified and as directed by Engineer-in-charge.

Supply only strainer suitable for 7.5 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge.

Supply only cable guard suitable for 7.5 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge.

Supply only pump sleevs suitable for 7.5 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge.

Supply only shaft suitable for capacity of 7.5 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge

Supply only bearing base plate suitable for 7.5 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge.

Supply only SS rotor sleeves for 7.5 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge.

Supply & fixing bearing bush for 7.5 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge.

Supply only thurst bearing complete suitable for 7.5 HP to 12.5 HP submersible pump all as specified and as directed by Engineer-in-charge

M&L for balancing of unbalanced rotar and correcting with stator body winding cap 3 to 12.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of DOL starter for 5 HP to 7.5 HP with relay 13-22 Amp complete all as specified and as directed by Engineer-in-charge. Make :- L&T / HAVELLS / GEC

Supply and fix in replacement electronic timer ET-100 240/415 complete all as specified and as directed by Engineer-in-charge. Make ;- L&T / Havells / GEC

Supply and fix in replacement amp meter 96 Sqmm digital type 0-100 amps complete all as specified and as directed by Engineer-in-charge. Make :- AE / EE / NUTRONICS (DPS)

Supply and fix in replacement volt meter 0-500 volts 96 sqmm digital type complete all as specified and as directed by Engineer-in-charge. Make :- AE / EE / NUTRONICS (DPS)

S&F in replacement of dial type FM-1 / QT daily timer one day 24 hrs 240 volt AC complete all as specified and as directed by Engineer-in-charge. Make :- L&T

S&F in repair CT 30/5 to 200/5 complete all as specified and as directed by Engineer-in-charge. Make :- AE / EE / NUTRONICS (DPS)

S&F in repair indicating light with bulb set of three complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC copper stranded conductor cable size 1.5 Sqmm multi stranded single core 1100 volt grade Make :- Kalinga / Finolex / Plaza

S&F in repair PVC copper stranded conductor cable size 2.5 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC copper stranded conductor cable size 4 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC copper stranded conductor cable size 6 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC copper stranded conductor cable size 10 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC copper stranded conductor cable size 16 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC flat sheathed submersible cable copper conductor of size 2.5 sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC flat sheathed submersible cable copper conductor of size 4.0 sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC flat sheathed submersible cable copper conductor of size 6.0 sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC flat sheathed submersible cable copper conductor of size 10.0 sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

Excavation in trenches in hard /dense soil including road cutting n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge

Returning filling in including spreading levelling watering and well ramming in layers not.exe 25cm each layers complete all as specified and as directed by Engineer-in-charge

Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge

Disconnecting and removing unserviceable under ground cable 1100 volts grade from trenches / poles / walls / floors etc of size 50 sqmm 3.5 core complete all as specified and as directed by Engineer-in-charge.

All as per Item No 188 but of size 185 sqmm 3.5 core complete all as specified and as directed by Engineer-in-charge.

Supplying, spreading and compacting approved river sand intrenches for cable cushioning at bottom and top of cable all as specified and as directed by Engineer-in-charge

Supply & lay burnt bricks sub class 'B' of old size laid dry in trenches as protection to cable all as specified and directed by Engineer-in-charge

Supply & laying of PVC insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade laid in trenches / poles / on walls etc of size 50 sqmm 3.5 core

Supply & laying of PVC insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade laid in trenches / poles / on walls etc of size 185 sqmm 3.5 core complete all as specified and as directed by Engineer-in-charge.

Supply & laying GI pipe light grade 50mm dia on poles / on walls / floor etc in S&F MS clamps made of 40mmx3mm iron strip complete all as specified and as directed by Engineer-in-charge.

S&F single phase preventor type VSP-D2 415 volts AC complete all as specified and as directed by Engineer-in-charge. Make :-Minilec or equivalent

Disconnecteding LT supply from unserviceable centrifugal pump set cap 5 HP to 7.5 HP 3 phase 440 volt and dismantling & shifting to workshop for repair / replacement of parts complete rewinding of motor with equivilent gauge (as retrieved) of copper winding wire complete with insulating material and required items i.e PVC sleeves, wooden sticks, terminal box connection plate, CI gland plate, water seal, MS bolt 10mmx50mm complete and re-assembling and refixing in its original place including testing complete all as specified and as directed by Engineer-in-charge. Note :- Parts to be replaced under this item shall be paid as supply only

Supply only ball bearing for 5 HP to 7.5 HP pump set as per sample complete all as specified and as directed by Engineer-in-charge.

Supply only gun metal sleeves for 5 HP to 7.5 HP pump set as per sample complete all as specified and as directed by Engineer-in-charge.

Dismantling & taking out defective parts of pump coupled with 25 HP to 40 HP motor and repairing & replacement of parts and refixing after repairing making complete serviceable by complete all as specified and as directed by Engineer-in-charge. Note :- Parts to be replaced under this item shall be paid as supply only under respective items

Supply only shaft of existing material suitable for 25 to 40 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only impeller of existing material suitable for 25 to 40 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only shaft sleeve of existing material suitable for 25 to 40 HP complete all as specified and as directed by Engineer-in-charge.

Drive end Bearing No 6313 complete all as specified and as directed by Engineer-in-charge.

Supply only Cast iron bearing housing for 25 to 40 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only Gland assembly suitable for 25 to 40 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only throat bush suitable for 25 to 40 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only mechanical seal suitable for 25 to 40 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only rotor body suitable for 25 to 40 HP complete all as specified and directed by Engineer-in-charge

Supply only shaft coupling suitable for 25 to 40 HP pump set complete all as specified and as directed by Engineer-in-charge.

Dismantling & taking out defective part of centrifugal pump set coupled with 50 HP to 75 HP motor and refixed after making it complete serviceable by repairing/replacement complete all as specified and as directed by Engineer-in-charge. Note :- Parts to be replaced under this item shall be paid as supply only under respective items

Supply only shaft of existing material suitable for 50 to 75 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only impeller of existing material suitable for 50 to 75 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only shaft sleeve of existing material suitable for 50 to 75 HP complete all as specified and as directed by Engineer-in-charge.

Drive end Bearing No 6313 complete all as specified and as directed by Engineer-in-charge.

Supply only Cast iron bearing housing for 50 to 75 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only Gland assembly suitable for 50 to 75 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only throat bush suitable for 50 to 75 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only mechanical seal suitable for 50 to 75 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only rotor body suitable for 50 to 75 HP complete all as specified and directed by Engineer-in-charge

Supply only shaft coupling suitable for 50 to 75 HP pump set complete all as specified and as directed by Engineer-in-charge.

Supply only ball bearing of size 3309 complete all as specified and directed by Engineer-in-Charge. Make :- SKF / NBC

Supply only ball bearing of size 6309 complete all as specified and directed by Engineer-in-Charge. Make :- SKF / NBC

Supply only roller ball bearing of size 21309 complete all as specified and directed by Engineer-in-Charge. Make :- SKF / NBC

Supply only ball bearing of size 6305 complete all as specified and directed by Engineer-in-Charge. Make :- SKF / NBC

Supply only ball bearing of size 6211 complete all as specified and directed by Engineer-in-Charge. Make :- SKF / NBC

S&F cooling fan for 25 to 40 HP induction motor of any make and type. Make :- As approved by Engineer-in-charge

S&F cooling fan for 50 to 75 HP induction motor of any make and type. Make :- As approved by Engineer-in-charge

S&F cooling fan for 05 to 10 HP induction motor of any make and type complete all as specified and as directed by Engineer-in-charge. Make- As approved by Engineer-in-charge

Disconnecting & dismantling of pump set from the foundation breaking the existing defective PCC foundation in any size, shape M&L for PCC 1:2:4 type B-2 using 12.5 mm graded aggregate for foundation of any size of motor pump set from 50 HP to 75 HP capacity pump set and fitting pumping set in position with base frame painted with synthetic enamel black paint complete all as specified and as directed by Engineer-in-charge

Supply only Water based chlorine (liquid) calcium hypo chloride grade-I as per IS-11673/86 with comprissing the following specifications :- (a) Clear liquid with straw yellow colour (b) Minimum PH Value range 6 to 8 (c) Freezing point 1-4 degree F (d) Fresh alkaline Na2 Co3 GPL (min) (e) Date of packing & expiry date mentioned on packing Jar / Cane (f) 90% GPL (g) Packing in 40 litre PVC Jar / Cane and selaed packing Jar / Cane shall be accepted by the Engineer-in-charge

Supply & fix MCB TP pole 415 volt AC of capacity 63 amps complete all as specified and as directed by Engineer-in-charge. Make :- Havells or its equivilent

All as per above item No 240 here-in-before but cap 32 amps complete all as specified and as directed by Engineer-in-charge.

Supply & fix in replacement of MCCB 200 amps 4/3 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schinider / L&T / Havells or as per existing make and model

Supply & fix in replacement of MCCB 100 amps 4/3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schinider / L&T / Havells or as per existing make and model

Supply & fix in replacement of MCCB160 amps 4/3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schinider / L&T / Havells or as per existing make and model

Supply & fix in replacement of MCCB 63 amps 4/3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schinider / L&T / Havells or as per existing make and model

Supply & fix in replacement of MCCB 400 amps 4 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schinider / L&T / Havells or as per existing make and model

S&F in replacement of MCCB 250 amps 4/3 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schinider / L&T / Havells or as per existing make and model

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 50 to 110 complete all as specified and as directed by Engineer-in-charge. Make :- L&T / Havells / GEC

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 40 to 45 complete all as specified and as directed by Engineer-in-charge. Make :- L&T / Havells / GEC

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 25 to 32 complete all as specified and as directed by Engineer-in-charge. Make :- L&T / Havells / GEC

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX upto 18 complete all as specified and as directed by Engineer-in-charge. Make :- L&T / Havells / GEC

Dismantling of 3 phase electric induction motor of any make and type and removing the old burnt copper winding wire from 25 /30 HP motor and rewinding with existing gauge of super enamelled copper winding wire including refixing in its original position and testing complete all as specified and as directed by Engineer-in-charge

All as per item No 203 here-in-before but cap of motor 40 HP complete all as specified and as directed by Engineer-in-charge.

All as per item No 203 here-in-before but cap of motor 50 HP complete all as specified and as directed by Engineer-in-charge.

All as per item No 203 here-in-before but cap of motor 75 HP complete all as specified and as directed by Engineer-in-charge.

S&F ball bearing 6312 complete all as specified and as directed by Engineer-in-charge. Make :- SKF / NBC

S&F ball bearing 6313 complete all as specified and as directed by Engineer-in-charge. Make :- SKF / NBC

S&F ball bearing 6311 complete all as specified and as directed by Engineer-in-charge. Make :- SKF / NBC

S&F roller bearing No NU-314C complete all as specified and as directed by Engineer-in-charge. Make :- SKF / NBC

M&L for GI clamps of 32mmx5mm complete with screw 50mm long x 6mm dia complete with drilling the hole with drilling machine with rawl plugs / wooden gutties for fixing / clamping the GI pipes suitable for 50/40mm dia at a interval 01 mtr each complete by providing necessary scafolding upto the height of 15 mtrs complete all as specified and directed by Engineer-in-charge

Material and labour for scrubbing out the rust deposited on the surface of centrifugal pump set including its base frame and preparing for applying paint and apply one coat of redoxide primer and two coat of synthetic enamel paint and marking SM /MES Number as directed. capacity of pump set 25 to 40 HP

Material and labour for scrubbing out the rust deposited on the surface of centrifugal pump set including its base frame and preparing for applying paint and apply one coat of redoxide primer and two coat of synthetic enamel paint and marking SM /MES Number as directed. capacity of pump set 50 to75 HP

Material and labour for scrubbing out the rust deposited on the surface of centrifugal pump set including its base frame and preparing for applying paint and apply one coat of redoxide primer and two coat of synthetic enamel paint and marking SM /MES Number as directed. capacity of pump set 5 to 20 HP

Supply and fix in replacement on load change over switch 4 pole 400 amps 440 volts open Execution type complete all as specified and as directed by Engineer-in-charge. Make : Havels

Supply and fix in replacement fully automatic star delta starter ML series with sheet metal enclosure suitable for 40 HP 3 phase 415 volts over load relay range 28- 42 amps complete all as specified and as directed by Engineer-in-charge. Make : Havels/ suitable model in L&T

Supply and fix in replacement fully automatic star delta starter ML series with sheet metal enclosure suitable for 20 HP 3 phase 415 volts over load relay range 20-32 amps complete all as specified and as directed by Engineer-in-charge. Make : Havels/ suitable model in L&T

Supply and fix in replacement fully automatic star delta starter ML series with sheet metal enclosure suitable for 10 HP 3 phase 415 volts over load relay range 10-16 amps complete all as specified and as directed by Engineer-in-charge. Make : Havels / suitable model in L&T

Supply and fix in replacement Motor Guard( weather protection cover) made out of 22 gauge GI Sheet suitable for 2 to 3 HP centrifugal mono block pump set with lifting handle and provision of suction /dicharge pipeline Holes complete all as directed.

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 5000 LTRS complete all as specified and as directed by Engineer-in-charge. MAKE :- SINTEX

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 2000 LTRS complete all as specified and as directed by Engineer-in-charge. MAKE :- SINTEX

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 1000 LTRS complete all as specified and as directed by Engineer-in-charge. MAKE :- SINTEX

M&L in replacement of Ladder for OHT/ UG sump with square bar,angle iron,channel, Flat Iron and etc welding, drilling, cutting with one primer coat, one under coat and one finishing coat of paint complete all as specified and directed by Engineer in charge.

M&L in replacement of unserviceable / burnt mono block pump set of capacity 0.5 HP to 0.75 HP complete all as specified and as directed by Engineer-in-cjharge. Make :- kirloskar Model Mini series 28S

M&L in replacement of unserviceable / burnt mono block pump set of capacity 1.0 HP complete all as specified and as directed by Engineer-in-cjharge. Make :- kirloskar Model Mini series 50S

Supply & fix Electronic overload relay (Manual reset) relay range 24-40 amp suitable for direct mountimg Make :- L&T or equivalent ISI marked.

Supply & fix Electronic overload relay (Manual reset) relay range 45-75amp suitable for direct mountimg. Make :- L&T or equivalent ISI marked.

Supply & fix Electronic overload relay (Manual reset) relay range 66-110 amp suitable for direct mountimg Make :- L&T or equivalent ISI marked.

Supply & fixing in replacement of self priming recirculation pump set of capacity 4.5 HP / 4.08 KW- RPM-3000 RPM, Head-14 Mtrs induction motor type for swimming pool as per existing make and model complete all as specified and as directed by Engineer-in-charge

S&F in replacement pressure gauge analong type 4" dia 0-14 Kg rating complete all as specified and as directed by Engineer-in-Charge.

M&L repair to fountain lights of any make and model complete all as specified and as directed by Engineer-in-Charge.

PRASAD ELECTRICALS

J.P. Enterprises

M/s Durga Traders

Sumit Enterprises