New Construction work of Bhagwanpur Raini (Bijnour District) road in Asadhya Village (Dariyapur) District Moradabad and Construction of a Small Bridge of 58.120 meter span on Budhi Tamganga River

Amount

Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M, and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M from the foundaiton trenches. S.I. No. 251 including all labour, material, T&P, etc complete but excluding GST.

Providing and Laying Cutting Edge of Mild Steel weighing 40 kg per metre for Well Foundation complete as per Drawing and Technical Specification. including all labour, material, T&P, etc complete but excluding GST.

Plain/Reinforced Cement Concrete, in Well Foundation in well curb complete as per Drawing and Technical Specification. including all labour, material, T&P, etc complete but excluding GST.

Providing sleeves nuts of approved design and length in well steining bars including threading of bars and nuts and their fixing as directed by E.I.C. including all labour, material, T&P, etc complete but excluding GST.

Plain/Reinforced Cement Concrete RCC Grade M30 in Well Steining complete as per Drawing and Technical Specification. including all labour, material, T&P, etc complete but excluding GST.

Sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level (Rate analysed as per sinking of 5m external dia) (a) Depth below bed level up to 3.0 M including all labour, material, T&P, etc complete but excluding GST.

Sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level (Rate analysed as per sinking of 5m external dia) (b) Depth above 3.00 to 10 M including all labour, material, T&P, etc complete but excluding GST.

Sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level (Rate analysed as per sinking of 5m external dia) (c) Depth Beyond 10.00 M including all labour, material, T&P, etc complete but excluding GST.

Plain/Reinforced Cement Concrete PCC Grade M 25 in Bottom Plug complete as per Drawing and Technical Specification. including all labour, material, T&P, etc complete but excluding GST.

Plain/Reinforced Cement Concrete PCC M 25 IN INTERMEDIATE PLUG complete as per Drawing and Technical Specification. complete as per Drawing and Technical Specification. including all labour, material, T&P, etc complete but excluding GST.

Sand filling in foundation trenches as per drawing and technical specification. including all labour, material, T&P, etc complete but excluding GST.

Plain/Reinforced Cement Concrete RCC Grade M 30 in Well Cap complete as per Drawing and Technical Specification. including all labour, material, T&P, etc complete but excluding GST.

Plain/Reinforced cement concrete RCC Grade M 30 in sub-structure complete as per drawing and Technical Specifications. including all labour, material, T&P, etc complete but excluding GST.

RCC M 40 in super structure in slab, girder, bearing coat etc. complete as per Drawing and Technical Specifications including all labour, material, T&P, etc complete but excluding GST.

Providing and laying cement concrete wearing coat M-40 grade including reinforcement complete as per drawing and technical specifications. including all labour, material, T&P, etc complete but excluding GST.

Supplying, Fitting and Placing HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. including all labour, material, T&P etc complete but excluding GST.

Supplying, Fitting and Placing HYSD bar Reinforcement in Substructure complete as per Drawing and Technical Specifications including all labour, material, T&P etc complete but excluding GST.

Supplying, Fitting and Placing HYSD bar Reinforcement in Superstructure complete as per Drawing and Technical Specifications. including all labour, material, T&P etc complete but excluding GST.

Reinforced cement concrete approach slab RCC Grade M30 including form work complete as per drawing and Technical specification including all labour, material, T&P etc complete but excluding GST.

PCC M 15 Grade in leveling course below approach slab complete as per drawing and Technical specification including all labour, material, T&P etc complete but excluding GST.

Supply and fixing of 10 cm internal dia P.V.C. down pipe everest or charminar make or any standard company complete with bands with door at top and plain at bottom and grating and including supply of necessary M.S. clamps 2.5 cm x 3 mm fixed to walls with and including supply of 10 cm long 6 mm dia Nuts and bolts including washers of required size. all materials, labour and T&P etc. required for proper completion of the work and also including repair of plaster, pointing etc. if damaged during fixing of the pipe. S.I. No. 730(a) including all labour, material, T&P etc complete but excluding GST.

Back filling behind abutment, wing wall and return wall complete as per drawing and technical specifications including all labour, material, T&P etc complete but excluding GST.

Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. including all labour, material, T&P etc complete but excluding GST.

Providing and laying of a modular strip Box seal expansion joint including anchorage catering to a horizontal movement beyond 70 mm and upto 140mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/ supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. including all labour, material, T&P etc complete but excluding GST.

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, including reinforcement complete as per approved drawings and technical specifications.including all labour, material, T&P etc complete but excluding GST.

Drainage Spouts complete as per drawing and Technical specification including all labour, material, T&P etc complete but excluding GST.

Construction of sub grade and earthern shoulders with approved material obtained from borrow pits with all lifts and leads transporting to sites, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1 including all labour, material, T&P etc complete but excluding GST.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. including all labour, material, T&P etc complete but excluding GST.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method, with rotavator at O.M.C. and compacting with smooth wheeld roller to achieve the desired density, complete as per Technical Specification clause 401. including all labour, material, T&P etc complete but excluding GST.

Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-10 Kn in stages to proper grade and camber applying and brooming crushable screening to fill-up the interstices of coarse aggregate watering and compacting to the required dencity grade 2 as per tech.spec.Clause 405 including all labour, material, T&P etc complete but excluding GST.

Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-10 Kn in stages to proper grade and camber applying and brooming crushable screening to fill-up the interstices of coarse aggregate watering and compacting to the required dencity grade 3 as per tech.spec.Clause 405 including all labour, material, T&P etc complete but excluding GST.

Providing and applying Tack coat with bitumen VG-10 using Bitumen pressure distributer @ 0.30 kg. per sqm on the prepared dry and hungry bitumenious surface cleaned with Hydraulic broom as per Technical specification Clause 503. including all labour, material, T&P etc complete but excluding GST.

Providing, laying and rolling of open graded P.C. of 20mm thickness composed of 13.2mm to 5.6mm aggregates eigher using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previously prepared base i/c mixing in a suitable plant, laying and rolling with a three wheeld 80-100 kN static roller capacity, finished to required level and gredes to be followed by seal coat of eigher Type C as per Technical Specification Clause 508 including all labour, material, T&P etc complete but excluding GST.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 including all labour, material, T&P etc complete but excluding GST.

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. including all labour, material, T&P etc complete but excluding GST.

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications including all labour, material, T&P etc complete but excluding GST.

Providing and laying of wire crates made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 40 kg each including all labour, material, T&P etc complete but excluding GST.

Cement Concrete with 4 cm gauge with Stone Ballast coarse sand & Cement in proportion 8:4:1 in foundation proper completion of the work. S.I. No. 281 including cost of all material, labour, labour cess, T&P etc and all other taxes but excluding GST.

M.S. (Tor steel or plain) in plain work such as R.C.C., R.B. Work including bending and binding for proper shape including supply of steel and its wastage and authorised over lapping shall be measured complete. including cost of all material, labour, labour cess, T&P etc and all other taxes but excluding GST.S.I. No 502

M-150 brick work in One cement and Three course sand mortar in foundation and plinth proper completion of work SI.No. 307 including cost of all material, labour, labour cess, T&P etc and all other taxes but excluding GST.

Struck pointing with cement mortar consisting one part of cement and 2 part of the fine sand of 1.25 finemes modulus on brick work including supply of all materials labour and completion of work. including cost of all material, labour, labour cess, T&P etc and all other taxes but excluding GST. S.I. No. 574

Supply & fixing of 1000mm dia Hume Pipe (NP-3) including cost of all material, labour, labour cess, T&P etc and all other taxes but excluding GST.

R.C.C. work with 2 cm. gauge approved none grit coarse sand and cement in propertion 4:2:1 in slab etc. excluding supply of reinforcement and its bending including supply of all materials labour, labour cess, T&P etc. required for proper completion of work SI. 283. but excluding GST.

R.C.C. work with 2 cm. gauge approved none grit coarse sand and cement in propertion 3:1.5:1 in slab etc. excluding supply of reinforcement and its bending including supply of all materials labour, labour cess, T&P etc. required for proper completion of work SI. 288 but excluding GST.

Cement Concrete with 2 cm gauge stone grit / single course sand and cement in proportion of 4:2:1 required for proper completion of the work SI.No. 279 (a) including supply of all materials labour, labour cess, T&P etc. required for proper completion of work .but excluding GST.

12mm. Thick plaster with one part of cement and three part of approved coarse sand including supply of all materials labour and completion of work.Including making of groove in plaster surface. S.I. No. 581

Supply and fixing of NP-3 350mm. dia Hume pipe including labour cess but excluding GST.

S F INFRA PROJECTS