REPAIR AND MAINTENANCE OF FLOORING TILING JOINERY AND OTHER MISC B/R ITEMS AT 196 MED REGT DUNDAHERA MIL STN GURGAON AND MANESAR ARMY CAMP IN THE AREA OF AGE B/R II (S) OF GE (SOUTH) DELHI CANTT 10

Amount

Taking down cement or cement lime plaster, any description, on brick or concrete or stone walls surface, etc including raking out joints, hacking for key, scrubbing down with water etc and removing the rubbis out side the MoD land complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:4 of brick/concrete surface finished fair even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:6 of brick /concrete surface finished fair even and smooth wihout using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for 10mm thick rendering in CM 1:3 on ceiling and finished fair even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of new plastered or unplastered surfaces of ceiling and applying three coats of White wash, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over including one coat of putty on whole surface, complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutters or without taking off shutters from the frame not exc 1.5 sqm each, complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exc 1.00 sqm but n.exc 2 sqm each, complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube , suppling and fixing in opening as per specification and drawing, complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing, complete all as specified and directed by Engineer-in-Charge.

S&F Factory made 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, using IInd class hard wood, complete all as specified and directed by Engineer-in-Charge.

S&F factory made 35mm thick glazed and skelton shutters of IInd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars) edge of framming plain chamfered, or rounded, fitted with cut and mitred beads for securing glass etc, size of member of shutters as specified in SSR part I, section 8, clause 8.20(a) , supplied and fitted to chowkhats, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new wooden surface of any description and apply two coats of synthetic enamel paint over a coat of pink primer over 10 Sq cm width or girth, complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolts ISI marked 150mm long , of extruded section and fixed, complete all as specified and directed by Engineer-in-Charge.

S&F MS hinges medium weight cold rolled ISI marked of 100mm size and fixed, complete all as specified and directed by Engineer-in-Charge.

S&F aluminium handles ISI marked 150mm size, Fabricated type, complete all as specified and directed by Engineer-in-Charge.

S&F 300mm long aluminium alloy anodised sliding door bolt ISI marked with hasp and staple ( bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded or cast aluminium alloy section, complete all as specified and directed by Engineer-in-Charge.

S&F galvanised mild steel wire cloths 0.56mm nominal dia of wire and average width of aperature 1.00mm and fixed with tinned tack or galvanised wire staple, complete all as specified and directed by Engineer-in-Charge.

S&F in repair galvanised mild steel wire cloths 0.56mm nominal dia of wire and average width of aperature 1.00mm and fixed with tinned tack or galvanised wire staple, complete all as specified and directed by Engineer-in-Charge.

Hacking out old brocken glass of (any thickness, size, quality or description) from aluminium fram/ beadings etc, complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick glass sheet ordinary quality frosted on one side, n exc 0.5Sqm in each pane,fixed to aluminium/MS windows, complete all as specified and directed by Engineer-in-Charge.

Dismantling of water tanks of any description exc 250 ltrs but not exc 500 ltr and removing from site of work, complete all as specified and directed by Engineer-in-Charge.

All as per item No 23 here-in-before but exc 500 Ltrs and n. exc 1000 Ltrs, complete all as specified and directed by Engineer-in-Charge.

M&L for rotational moulded polythylene water storage tanks three layers 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule size 25 mm bore, complete all as specified and directed by Engineer-in-Charge.

All as per item no 25 here-in-before but 1000 Ltrs capacity complete all as specified and directed by Engineer-in-Charge.

S&F PTMT nipple suitable for 15mm dia HDPE water tank minimum weight 15mm, 38grm/20mm, 45 grm, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, screwed for iron pipe or brass ferrule for Flushing cistern etc, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs of plastic WC seat cover white/ off white closed pattern with flat bottom end cover and mild steel CP hinging device, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, CP health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) , white/ off white, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs viterous china squatting pan 'ORISSA Pattern long pan size 580x440mm white with integral foot rests 'P' or 'S' Trap front or back inlet (excluding flushing cistern & flush pipe but including nahani/floor trap), complete all as specificed and directed by Engr-in-charge.

S&F in repairs, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 litre capacity, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, PVC waste pipe 32 mm bore, 65cm long plain/ corrugated including suitable adopter, complete all as specified and directed by Engineer-in-Charge.

S&F in repair, vitreous china wash hand basin of size 550x400mm, white flat back , including waste coupling of PTMT 32 mm and waste pipe, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, bib tap, brass chromium plated fancy type, long body screwed down for iron pipe 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, PVC connection 15mm size with brass nut of length 450 mm for hot/ cold water pipe, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs pillar taps 15mm, CP/brass with capstan heads, screwed down high pressure, screwed for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.

Taking up or down GI steel tubing and connections including removal to store, complete all as specified and directed by Engineer-in-Charge.

15mm bore

20mm bore

S&F GI tubes, medium grade galvanised, with all fittings and fixtures fixed to walls and ceilings or laid in floors or concealed, complete all as specified and directed by Engineer-in-Charge.

15mm bore

20mm bore

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing’s or conduit wiring, etc and making good, cutting not exceeding 10cm girth, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (above or below ground level) and removing the rubbis out side the MoD land complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base, complete all as specified and directed by Engineer-in-Charge.

M&L for 60mm thickness Machine pressed pre-cast concrete interlocking paver block any size and shape confirming to IS 15658-2006, M-35 grade with grey cement and no pigment, laid over 30mm thick sand cushion and including joints filled with sand, complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete chequered tiles with cement and no pigment 20cm x 20cm x 25mm thick, machine pressed, set, jointed and pointed in neat cement slurry in floors and cut and polished over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar including all quions, pillars, ashlar facings, dressed stone work and precast articles etc., complete all as specified and directed by Engineer-in-Charge.

M&L for Brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for prepartion of old distemperd/ painted wall surface by washing down, rubbing and stopping including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efforescent salts and trading oil and greasy spots thereafter filling of holes and cracks wall care putty to obtain an even and smooth wall surface and applying two coats of oil bound distemper on wall surface including scaffolding arrangement, trestles, ladders, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying one coat of cement based paint on walls, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying two coats of white wash on walls surface, complete all as specified and directed by Engineer-in-Charge.

All as per item no 51 here-in-before but one coat of white wash on ceiling, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted Steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint of approved shade/tint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of approved shade/tint, complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exe 1.00 Sqm but not exceeding 3.00 Sqm, which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer, including scaffolding arrangement, trestles, ladders, complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exceeding 3.00 Sqm but not exceeding 5.00 Sqm , which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer,including scaffolding arrangement, trestles, ladders, complete all as specified and directed by Engineer-in-Charge.Charge.

S&F in repairs, brass spindles with knobs suitable for concealed stop valves/ bib tap/ pillar tap/ hot and cold mixture all as per sample, complete all as specified and directed by Engineer-in-Charge.

Dismantling wall & ceiling boards of any description and thickness including cover fillets, complete all as specified and directed by Engineer-in-Charge.

Anodized aluminum snap grid frame work for false ceiling, size of grid 600 mmx600mm, runners of size 15x32mm with hangers of 6mm dia GI (up to 1200mm length) adjusting level, fixed to roof by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including Gypsum board of thickness 12.5mm moisture resistant of size 595x595mm inserted to GI/Aluminum frame work with screws, complete all as specified and directed by Engr-in-Charge. Make: Everest, Armstrong or its equivalent as specified make.

Dismantling floor, hearth or wall tiling inculding cement motar bedding (but not backing ) removing rubbish of the premises, complete all as specified and directed by Engineer-in-Charge.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, as in floors laid on 15mm thick cement screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge.

M&L for coloured glazed printed ceramic tiles in vertical surface 200x300x7mm thick set and jointed in neat cement slurry and pointed in white cement with pigment to match the tiles incl Rendering 10mm thick in cement mortar (1:4), complete all as specified and directed by Engineer-in-Charge.

Dismantling up to 100mm bore cast iron pipe (soil/waste/vent) with fittings, jointed with cement or lead including burning out lead joint, from wall or floors including of all fittings such as tee, bend, branch pieces, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Cast iron branch piece single (equal or unequal) ordinary or inverted, spigot or socket type or with paralled branches bore of pipe 100mm, complete all as specified and directed by Engineer-in-Charge.

All as per item no 64 here-in-before but 75mm bore of pipe, complete all as specified and directed by Engineer-in-Charge.

S&F cast iron bends (any radius) of any descreption for bore of pipe 100mm jointed with polymer based jointed materials without oval access door, complete all as specified and directed by Engineer-in-Charge.

All as per item no 66 here-in-before but 75mm bore of pipe, complete all as specified and directed by Engineer-in-Charge.

S&F cast iron (sand cast) soil, waste and vent pipe in any length with or without ears with cement joints, fixed to walls, bore of dia 100mm bore, complete all as specified and directed by Engineer-in-Charge.

All as per item no 68 here-in-before but 75mm bore of pipe, complete all as specified and directed by Engineer-in-Charge.

S&F stack clamps 100mm bore out of 50mm by 5mm flat iron and 16mm dia round iron stay including bolts and nuts and securing ends of stays to walls or roof, complete all as specified and directed by Engineer-in-Charge.

All as per item no 70 here-in-before but 75mm bore of pipe, complete all as specified and directed by Engineer-in-Charge.

Attending complaint for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc. of any description any size by changing the washers(s)/ jumper(s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tighting the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fittings etc complete all as specified and directed by Engineer-in-Charge. Note:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor has to provide minimum one plumber with all necessary T&P on all working days from 9.00 AM to 5.00 PM. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of plumber on any working days. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill..

S&F in repairs brass chromium plated Stop valve/angle valves cast copper alloy, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass CP mixture 15mm bore for mixting hot and cold water for centre hole wash basin including fittings screwed down for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, CP waste coupling 32/40 mm dia suitable for wash hand basin or kitchen sink, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, stainless steel grating doom 125 mm bore ISI marked, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, Brass chromium plated shower rose 125mm bore with arm, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC syphone with handle ISI marked for low level flushing cistern, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs HDPE PVC lid (cover) for 500 to 1000 Litres capacity PVC water storage tanks, complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning and removing all scales and dirt etc from existing water tanks and from mouths of circulating pipes etc for exc 500 but not exc 1000 litres capacity of water tanks, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs sinks made of stainless steel 01mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engineer-in-Charge.

Attending complaint for petty repair to easing of Doors/ Window/ Cup Board shutters by tightening of hinges/ handles/ Al-drop bolt/ tower bolt/ knobs, hasp and stapple etc of any size/ any number of panels for easy closing/ opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror etc complete all as specified and directed by Engineer-in-Charge. Note :- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor has to provide minimum one carpainter including all necessary T&P on all working days from 9.00 AM to 5.00 PM. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of carpainter or helper on any working days. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill..

S&F in repairs, aluminium anodised ISI marked barrel tower bolts of extruded section 150mm long, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, 150mm long aluminium handles ISI marked cast type anodised, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, 300mm long aluminium alloy, anodised, sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete type B-2 1:4:8 using (40mm graded stone aggregate) as in foundations filling and mass concrete, complete all as specified and directed by Engineer-in-Charge.

M&L for welding in any length exc 2.5cm but n.exc 5cm complete all as specified & directed by Engineer-in-Charge.

M&L for green marble 18 to 20mm thick (table rubbed and polished) in cooking plateform, machine cut, laid over and including cement concrete bed 20mm thick in CM 1:6, jointed and pointed with grey cement mixed with colour pigment to match the shade of slab including rubbing, polishing and making edges chamfered, complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut Kota Stone slab flooring 20-25mm thick laid over 15 mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning of all blockages of Nahni traps/ floor traps/ bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150mm to 250mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/ Cantt board), and maintain internal & external sewage system in functional state at all the time with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25cm thick layer of soil. complete all as specified and directed by Engineer-in-charge.Charge. Note: 1. The contractor shall make all arrangement for atteding the different types of complaints on every day basis at Dundahera Mil Stn Gurgaon & Tarapore Officers Enclave, Rangpuri complaint cell under AGE B/R-II (S). 2. One safaiwala and one helper for Dundahera Military Station Gurugram and One safaiwala and one helper for Tarapore Officers Enclave, Rangpuri (total two Nos Safaiwala and two Nos Helper) from 0900 Hrs to 1700 Hrs. 3. A recovery of Rs. 500/- shall be recovered from the contractor for non-deploying One safaiwala and Rs. 300/- for one helper. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill.

Cleaning of sewage lines not exc 300mm bore including manholes by super suction machine with water jet pressurre, the suction wastage material will be collcet in tanker and disposed outside of MoD land. Note:- All T&P will be provided by contractor including water for pressure to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr in depth for foundation etc or for shafts , wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out soft/loose soil, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material n. exc. 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar 150mm dia, complete all as specified and directed by Engineer-in-Charge.

M& L for plain cement concrete (1:4:8), type D-2, using 40mm grade stone aggregate as in concrete bed to drain pipes laid to falls in trenches in any depth including packing under and haunching against the sides of pipes for 150mm bore pipes they are laid and tested, complete all as specified and directed by Engineer-in-Charge.

M&L for SGSW drain pipes 150mm dia laid in trenches and jointed in CM (1:3), complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description in any postion not otherwise specifically provided for. complete all as specified & directed by Engineer-in-Charge.

M&L for providing precast reinforcement cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in cover slab for (main holes) shelves and simillar works including necessary form work complete all as specified & directed by Engineer-in-Charge.

M&L, TMT bars 10mm dia and over , cut to length, bent to shape, required, including cranking, bending spirally as required, hooking ends, binding with and including MS wire (annealed) not less than 0.9 mm dia. complete all as specified & directed by Engineer-in-Charge.

M&L for Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping and similar work etc. including weathering, slightly rounded or chamferred angles and throating and provision of necessary formwork, complete all as specified and directed by Engineer-in-Charge.

M&L setting coat 3mm thick, trowelled to even and smooth finish in CM 1:2, complete all as specified and directed by Engineer-in-Charge.

S&F in repair SFRC manhole cover 'medium duty' of overall size 630mm dia factory made complete all as specified and directed by Engineer-in-Charge.

S&F in repair SFRC manhole cover 'medium duty' of overall size 700mm x 700mm factory made complete all as specified and directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required, Internal dia of pipe 150mm complete all as specified and directed by Engineer-in-Charge.

Demolition of concrete in ground floors and pavings n.exc 15cm thick below or above ground level, complete all as specified and directed by Engineer-in-Charge.

S&F in repair for continous road edging with pre-cast cement concrete blocks (1:3:6) using 20mm graderd stone aggregate, blocks exceeding 10cm thick with plain fair faces with or without chamferred edge and setting and jointing in cement mortar 1:4 including necessary excavation in hard/dense soil, tamping ground aroiund blocks and removal of surplus soil to a distance not exceeding 50 metre, complete all as specified and directed.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

P R Constructions

SABHARWAL CONSTRUCTION CO.

MOHIT ENTERPRISES

M/S.Parmod Johar

verma enterprises