Loading
Loading…
Loading…
Tender Value
₹25.4 L
EMD Value
₹50,800
Closing Date
2 Mar 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
TENDER SEC
13 conditions · 2 needing a document upload
No Financial credentials are required for tenders having advertised value up to Rs 50 lakhs.
No Financial credentials are required for tenders having advertised value up to Rs 50 lakhs.
35 conditions · 3 needing a document upload
Whether required test certificates/ samples, if any have been uploaded?
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society/ Registered Trust / Hindu Undivided Family( HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the requisite documents (including Power of Atorney, if opted) for constitution of their concern as per Cl.14 of GCC-Part-l and as per a) Clause 17 of GCC - Part-1, for JV b) Clause 18 of GCC - Part 1, for Partnership Firm
Copies of the following documents are to be uploaded: (i) Details such as Name of the tenderer/ Contractor, Validity of DSC, Complete address with pin code, Contact Number (ii) Copy of PAN Card (iii) Copy of GSTIN card
A copy of NEFT form duly filled in the details as necessary to be uploaded. (The Tenderer/ Contractor not having NEFT form may down load the empty NEFT form available in document site)
Submission of Annexure-V under Document Verification Certificate- As per Advance Correction Slip No.4 dt.07/08/2023 to GCC - 2022, the tenderers shall submit copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder in form of Annexure V. Non-submission of the above Certificate(s) by the bidder shall result in summarily rejection of his/their bid.
Submission of Annexure-V(A) under Document Verification Certificate : In case of other than Company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/Joint Venture (JV) /Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc., as the case may be. Non-submission of the above Certificate (s) by the bidder shall result in summarily rejection of his/their bid.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Sr.DEN/South/MDU jurisdiction: Repairs and maintenance to the PFS in SSE/W/SCT section
MDU-W-02-2026-03~SR
MDU-W-02-2026-03
Open
Works - General
3 Months
Madurai, Tamil Nadu
₹0
₹50,800
2 Mar 2026
5 Feb 2026
16 Feb 2026
18 items across 1 schedule · ₹22,26,534.35 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | .2 | 18,644.6 | 3,728.92 |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 7 | 6,658.25 | 46,607.75 |
| 3 | Area of slab over 0.50 sqm | Sqm | 10 | 4,425.35 | 44,253.5 |
| 4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 1000 | 111.95 | 1,11,950 |
| 5 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | .5 | 7,958.65 | 3,979.33 |
| 6 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | Metre | 704 | 163.65 | 1,15,209.6 |
| 7 | Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. | Each | 550 | 72 | 39,600 |
| 8 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 1232 | 671.55 | 8,27,349.6 |
| 9 | Ridges plain (500 - 600mm) | Metre | 18 | 450.6 | 8,110.8 |
| 10 | 1:6 (1 cement: 6 fine sand) | Sqm | 30 | 282 | 8,460 |
| 11 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 3 | 2,007.1 | 6,021.3 |
| 12 | In cement mortar | cum | 7 | 1,698.45 | 11,889.15 |
| 13 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | Kg | 1000 | 4.65 | 4,650 |
| 14 | For thickness of tiles above 25 mm and up to 40 mm | Sqm | 30 | 93.4 | 2,802 |
| 15 | G.S. Sheet | Sqm | 1683 | 136 | 2,28,888 |
| 16 | 150 mm dia pipe | Metre | 10 | 66.2 | 662 |
| 17 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 200 | 219.35 | 43,870 |
| 18 | 0.91 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm. | Sqm | 576 | 1,247.4 | 7,18,502.4 |
| Schedule total | ₹22,26,534.35 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .