PROVN OF CATTLE FENCING , STORE ROOM SIZE (10.00M X 5.00M) APPROX, 03 X TOILET BLOCKS, SEWAGE LINE, SOAKAGE PIT, 32 X GEYSER OF CAPACITY 25 LTRS AND 04 X WATER COOLERS AT CERTAIN LOCATIONS AGAINST MINOR/REV WORKS UNDER AOR OF GE (EAST) AGRA

Amount

Surface excavation, n.exc 30 cm deep and ave 15 cm, getting out in soft/loose soil complete all specified and directed.

Excavation in over area n.exc 1.5m in depth and getting out, in soft/loose of soil complete all specified and directed.

Excavation in over area exc 1.5m in depth but not exc 3 m and getting out, in soft/loose of soil complete all specified and directed.

Excavation in over area exc 3 m in depth but not exc 4.5 m and getting out, in soft/loose of soil complete all specified and directed.

M&L for loose filling of brick bats size of 80 to 150 mm in soak well /soakage pits complete all specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth as in foundation etc as in any type of soil complete all specified and directed.

M&L PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete complete all specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm as in soil complete all specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point with soil complete all specified and directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in foundation , raft, footing, plinth beam, base for column etc complete all specified and directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in column complete all specified and directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in roof beams, chajja, lintle etc complete all specified and directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roof, landings, balconies, canopies, deck slab and in shevels the like complete all specified and directed.

M&L Formwork to side of concrete foundation footing base of column raft beam and plinth beam with required gap filler etc complete all specified and directed.

M & L form work to side/bottom of pillars, post, column, beam, slab square, rectangular or polygonal required gap filler etc complete all specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc complete all specified and directed.

M& L form work to sofits of suspended slabs such as roof slabs,floors slabs, landings/chajja and similar work not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete required gap filler complete all specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work for fair and smooth surface exc 10cm but n exc 20cm wide complete all specified and directed.

S&F mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking, bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all specified and directed.

S&F mild steel bars 5 mm dia and over up to 10 mm dia in stirrups space and binders (TMT) cut to length bent to shape required including cracking, bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel complete all specified and directed.

M&L hardcore of gauge exc.63 mm but not exc 100 mm deposited , spread and levelled in layers n exc. 15 CM thick, watered and rolled/rammed to a true surface complete all specified and directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all specified and directed.

M&L Brick work with sub class 'B' old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

M&L for Brickwork with sub class ‘B’ bricks old size in one brick thick honey comb walling, built in 1:4 ement and sand mortar complete all specified and directed.

M&L12 mm Rendering with CM (1:6) over brick/concrete surface other than surface fair & even surface complete all specified and directed.

M&L15mm Rendering incl WPC with CM (1:4) over brick/concrete surface fair & even surface and complete all specified and directed. ( Note :- WPC shall be measured Sparely )

M&L for Rendering 5 mm thick (1:3) cement and sand mortar on ceiling complete all specified and directed.

All as per item No 27.00 above but 5 mm thickness (1:4) on ceiling complete all specified and directed.

S & F Factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS Square tube, EPDM rubber gasket weather seal shall be provided through out the frame, the profile shall be mitre cut at two corners and joined by inserting 2 nos of 150mm long brackets of 15x15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed to be fixed with 08 nos 75mm long MS Screws with PVC fasters per chowkhat complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed

M&L for factory made Pressed steel frames 125 x 60 x 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate, etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed.

M&L two coat of synthetic enamel paint over new prepared steel surface over red oxide primer complete all specified and directed.

S&F mild steel work for hold fast and similar small articles conforming to Fe 410-0 or Fe 310-0 including MS screws, bolts, including tarring with a coat of tar and sanding complete all as specified and directed.

M&L for providing, PCC 1:3:6 type C-1 (using 20mm graded aggregate) for embedding hold fasts including necessary form work etc complete all as specified and directed.

S & F 35 mm thick flush shutters factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed.

S & F ventilator made of pre-painted steel (Base steel as per IS 513 of 0.58 mm minimum thick “D” Quality galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48x50mm, centre mullion should be of 48x50mm, section for shutter should be of 52x 25mm and rebate for Glazed shutter with a 20mm provision for Guard bars/Grills. The sections are to be cut to length metre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Handle, stay, 2 nos. of Stainless Steel heavy duty Pivot hinges shall be provided per shutter the windows fitted with 4mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including fixed panel beading section should be of 12x12mm. Outer frame and mullions to have 10mm Square guard bars with 6” (152.4mm) pitch etc complete all as specified & directed.

S&F Aluminium butt hinges of 100mm size type C-22 complete all as specified & directed.

S&F Aluminium anodised barrel tower bolt of 200 mm of extruded section complete all as specified & directed.

S&F 250mm long aluminium alloy anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed.

S&F aluminium, anodised handle cast type of size125 mm complete all as specified & directed.

S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for Coloured Glazed ceramic tiles 450X 300X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 on brick wall complete all as specified & directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified & directed.

M&L for 25mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base of floor etc complete all as specified & directed.

M&L 75mm thick PCC (1:3:6) type C2 using 40mm graded stone agg as in plinth protection/Path/paving surface even and smooth and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work and filling the joints with mastic filling of one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) complete all as specified & directed.

M & L Two coats of cement base paint over coat of primer over new prepared wall surfaces complete all as specified & directed.

M&L Three coat of White wash over newly plasterd on ceiling surfaces complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 20 mm outer dia on walls/ceiling or laying in floors complete all as specified & directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 25 mm outer dia on walls/ceiling or laying in floors complete all as specified & directed.

S&F Brass elbow for 20 mm outer Dia CPVC Pipe complete all as specified & directed.

S&F Brass Tee for 20 mm outer Dia CPVC Pipe complete all as specified & directed.

S&F Brass elbow for 25 mm outer Dia CPVC Pipe complete all as specified & directed.

S&F Brass Tee for 25 mm outer Dia CPVC Pipe complete all as specified & directed.

S&F 25 mm outer Dia Union complete all as specified & directed.

S&F 25 mm outer Dia Ball valve complete all as specified & directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified & directed.

S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle handle including bracket complete of capacity 10 litres complete all as specified & directed.

S&F15mm, CP angle cock fancy type chromium plated, cast copper alloy, with capstone heads, screwed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and fly nuts, srewed for iron pipe complete all as specified & directed.

S&F15mm ,bib tap , fancy type chromium plated, cast copper alloy, with capstone heads, scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified & directed.

S & F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all specified and directed.

S&F stop cock, (Concealed type) cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed.

S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms) fixed with cement complete all specified and directed.

S&F Soap dish of PVC fixed with pvc rawal plugs and screw complete all specified and directed.

S &F Tublar towel rail 20mm dia D type 60 cm long between flange Brass CP complete all specified and directed.

S & F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part - I complete all specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of loose 20 mm (minimum weight 210 grams) complete all specified and directed.

S&F vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flusingh cistern ) and making good to disturbed surface of floor complete all specified and directed.

S&F Vitreous China wash hand basin white flat back size 550x400mm including brackets , CP waste coupling and 32 mm pvc flexible waste pipe 800 mm long etc complete all specified and directed.

M&L for 20mm thick granite stone slab (of any type) as in floor or skirting, over 20 mm thick screed bed in CM 1:4,machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all specified and directed.

S&F 15mm dia PVC connection with PTMT nuts of length 450 mm complete all specified and directed.

S&F in repairs, 5 to 6 mm thick bevelled edge looking mirror of required size & shape of best quality with 50 X 20 mm teak wood polished beading with 6 mm thick ply/AC/PVC board beading fixed with C.P screw etc complete all as specified and directed.

S&F PVC (SWR) Pipe of 110mm dia any length and joint complete all specified and directed.

S&F PVC (SWR) Pipe of 75mm dia any length and joint complete all specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee pieceinserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all specified and directed.

S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete all specified and directed.

S&F 75 mm dia PVC(SWR)pipes bends any radious with acces door complete all specified and directed.

S&F 110mm dia PVC(SWR)pipes junction, single (single T/Y ) equal or unequal any radious with acces door complete all specified and directed.

S&F 110mm dia PVC(SWR) vent cowl complete all specified and directed.

M & L 75 mm dia of out let PVC (SWR) floor trap plain with grating incl. jointing with solvent cement complete all specified and directed.

M & L PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement with greating complete all specified and directed.

M&L 10mm thick rendring with CM (1:4) over roof surface surface even and smooth mixed with WPC complete all specified and directed.

Supply only Integral water proofing compound complete all specified and directed.

M&L15mm Rendering one coat of 10 mm with 1:6 CM plaster and 5 mm thick Coat incl WPC with CM (1:4) over brick/concrete could surface fair & even surface and complete all specified and directed. ( Note :- WPC shall be measured Sparely )

M & L for Provn of polymeric water proofing roof treatment to non assessable RCC roof described as under and all as specified :- (a) Preparing RCC roof surface and applying one coat of bitumen primer @ Rs. 0.30 Kg /Sqm (b) Applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm (c) Laying of water proofing teratment with APP modified polymeric of weight not less than 3 kg / sqm water proofing membrane with non woven polyster mat of weight 160gms/sqm as centre core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s all as specified. (d) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (e) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site complete all specified and directed.

Low density polyethylene (LDPE) pipes 32 mm of pressure rating 6kgf/sqcm complete all specified and directed.

waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) complete all specified and directed.

M&L cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling and mass concrete. Etc complete all specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 including flush pointing external faces with the same mortar as the work proceeds complete all specified and directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings, kerbs, benching and the like, including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all specified and directed.

M&L Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC (1:3:6) type C-2 for 150 mm dia of pipe complete all specified and directed.

M&L 150 mm SGSW drain pipe laid in trenches and jointed complete all specified and directed.

M&L precast RCC as in cover slab including all form work mould etc using Type B1 (1:2:4) with 20mm graded stone agg and set in CM (1:6) complete all specified and directed.

M&L MS Bar 6mm to 8mm dia cut to length bent to shape including cranking cutting bending and binding with 0.9mm dia MS annealed wire complete all as specified and directed.(TMT Bar)

M & L for 40mm thick PCC Type B-0 (1:2:4) 12.5 mm graded with water proofing compound for damp proof course to horizontal or vertical surfaces including necessary formwork complete all specified and directed. (Note :- WPC shall be measured separately)

M&L for Machine cut kota stone slab flooring 20-25mm thick incl and over cement screed bed 20 mm thick in 1:6 cement and sand mortrar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and incl 10 mm thick cement screed bed 1:4 cement and sand mortrar, all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of floor etc complete

S&F for factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and as directed.

S&F for factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars (wire mesh shutter) dovetailed or welded complete all as specified and as directed.

S & F tubular steel farmed work as in doors (as in ckowkats) for double door frames of 2.5mm thick size130 x 65 including necessary fixing lugs, lock strike plate incl locking arrengemet , etc complete all as specified and directed. ( tubular steel 130x65mm@ 6.99kg/Rm)

S&F or skeleton factory made door shutter, 35mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge ( without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified & directed.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F for 3 mm thick sheet glass ordinary quality and glazing withoil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed

S & F galvanized mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plate, rails braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fitting incl cutting and making good with cement concrete 1:3:6 C1 complete all as specified & directed.

S&F steel ventilator whit top hung shutter including hinges, steel peg stay complete all as specified & directed.

M&L figured glass pin head type 3 mm thick and glazing with oil putty in square but exc. 0.5 sqm in each pane 3 mm thick complete all as specified & directed.

S&F Aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified & directed.

S&F steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floors of 15 mm dia of bore complete all as specified & directed.

S&F steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floors of 20 mm dia of bore complete all as specified & directed.

S&F Pillar taps cast copper alloy fancy type with capstan heads chromium plated scrwed down high pressure with or without lettered Hot or Cold with long screwed shanks (swan neck type) and fly nuts screwed for 15 mm dia iron pipe complete all as specified and directed.

M&L Varoda green marble 18 to 20 mm thick in steps, pillars, wndow cills, pillars, window cills, cooking platforms and like laid over and including 15 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

S&F 20 mm dia Gate valve of brass with lever type handle complete srewed for iron pipe fixed in repair complete all as specified & directed.

S & F 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part – I complete all as specified & directed.

S&F water closet including provision of cement concrete bedding viterous china squatting pan orrisa pattern of size 580x440 mm white with integral foot rest etc excluding flushing cistern complete all as specified & directed.

Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified & directed.

S&F Urinal spredder of CP brass for fixing with 15 mm dia of pipe complete all as specified & directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in soft/loose soil, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm and removing surplus soil complete all as specified & directed.

supply only chain link mild steel galvanised fencing of 50 size of mess and 3 mm dia of wire & weight n exc 4 kg/sqm incl fixing to any type of standards, rail, straining bolts etc including provision of binding wire complete all as specified & directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified & directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long dia of neck 5 to 10 mm complete all as specified & directed.

S&F 10mm round bars and over as in stiffner to hold the chain link fencing fixed with angle iron post including necessary welding and fixing arrangement at ends complete all as specified & directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of bituminus paint over a coat of red oxide primer complete all as specified & directed.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe 410-0 or Fe 310-0

S/F flat iron fillets ( (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed.

M&L for point wiring with 4 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FRLS PVC insulated 2.5 Sqmm multi standard unsheathed copper wire for continues earth, sunk in cast iron/Pressed steel terminal boxes 60 mm deep & 1.6 mm thick duly painted with aluminum inside and anticorrosive paint out side/PVC polycarbonate PVC rectangular block 50 mm deep, including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :-

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FR PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FR PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and GI sunken box and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Note :Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light point or one fan point controlled by one switch.

One 3 pin socket outlet 5 amps on the same board with other switches complete all as specified & directed.

One 5 pin socket outlet 5/6 Amps on independent board complete all as specified & directed.

All as per item No 132.00 here in before but with cable size 4 Sq mm for one AC socket out let on 16 Amp independent board / AC point and multistr and insulated copper earth continuity conductor of size 4 sqmm complete all specified and directed.

Supply and fix switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all specified and directed.

Supply and fix Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body complete all specified and directed.

Supply and fix socket 5 amps 5 pin flush type, 240 volts with polycarbonate body complete all specified and directed.

Supply and fix socket out let, 6 pin 5 and 15 amps multipurpose 2 in 1 flush type, 230 volts with polycarbonate body complete all specified and directed.

S&F ceiling rose , 3 phase/PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals complete all specified and directed.

Supplying and fixing 20 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 20W, luminaire lumens > 2000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all specified and directed.

Supplying and fixing 10 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 10W, luminaire lumens > 1000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all specified and directed.

Supply & fixing LED security light compact & trendy of 35 watt with aluminium pressure diecast housing, IP 65 protection, luminaire lumens > 3000 lumens/W and in built electronic driver prewire upto terminal block with driver efficiency > 85 %, power factor > 0.95, as per IEC 61000-3-2, colour temp 6500 K Surge protection 3.5 KV, 50000 burning hrs (min) as per L70 Criteria, multi stage constant current operated driver with range 150-270 VAC and safety exra low voltage safe load < 60 VDC as per IEC standards with LM 70 & 80 certification complete all as specified, fixed to pole or wall of buiding with and including suitable Bracket made out of 25 mm dia GI light grade pipe, 1.20 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps 50x6 mm to be tightened with suitabe size of bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer, and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 Sqmm including all accessories and fixing arrangements for fixing the light fitting complete all specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep (Copper winding) with, blades, and frame and louvers, necessary connection complete all specified and directed.

Supply, fix and installation of electric water heater, storage type made of ultra thick super cold rolled steel plates, feroglass dry powder coating technology S/S inner tank and heating element heavy duty magnesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW capacity,230 V, 1 Phase AC, 50 Hz, 25 litre, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating element offers superior heating performance and resistance to oxidation and carbonation at high temperatures rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all specified and directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all specified and directed.

Supply and fixing MCB SP 5 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all specified and directed.

Supply and fixing MCB SPN 40 to 63 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all specified and directed.

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 Core, complete all specified and directed.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks. (designated 75) locally available best quality laid dry in trenches for protection of underground cable complete all specified and directed.

Supply and lay GI tube medium grade 25mm size as in cable protection pipe including all fittings complete all specified and directed.

S & F stepped type electronic fan regulator socket type ISI marked on the existing phenolic laminated sheet etc. as required, complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified & directed.

Supply, fixing, connecting & testing ceiling fans copper wound complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), and including connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose and also writing MES No with black paint complete all as specified and directed.

Supply and fix 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm dia complete all as specified and directed.

S&F PVC connection 15 mm size, heavy duty with brass nuts, 450 mm long complete all as specified and directed.

S&F Lamp holder/angle holder insulated body with black/white plate for batten fittings alongwith 9 watt LED bulb complete all as specified and directed.

S&F sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in conduit not less than 20mm, complete all as specified and directed by Engineer-in-charge including taking down of existing un serviceable sub main wiring complete all as specified and directed.

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, complete all as specified and directed.

Supply and fix water cooler electric driven (single phase), having approx storage capacity of 120 litre and nominal cooling capacity of 60 Litres per hour complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA complete all as specified and directed.

M&L for point wiring with FR PVC insulated PVC sheathed electric cable confirming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 2.5 Sq.mm nominal cross sectional area for phase & neutral & including non metallic rigid PVC casing caping ISI marked medium grade with all accessories in surface wiring system as required at site & directed & 2.5 Sq.mm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including galvanized iron boxes suitable for modular switch, socket accessories complete for 15 Amps socket point on independent board controlled by one , one way switch complete all as specified and directed.

3Krishna Enterprises

Sree Ram Enterprises

m/s shanti consruction co