Rate Contract in respect of Pre- Fab Structure and Civil works.

Amount

Structural Steel work welded in built up section for trusses, purlin, partitions, projections, etc for Pre-fabricated structure including cutting, hoisting, placing in position all parts of leads lifts and carriages upto site of work with application of Red-oxide steel primer complete job

Providing fixing of 0.63mm thick colour coated steel profile sheets. Sheets covering will be fixed with using hot dip zinc coated self drilling hexagonal washer head fasteners. The sheets shall be laid with minimum end and side lap of 150mm. Ridge shall be covered by 0.63 mm thick colour coated steel sheet.

WALL PANEL: The walls will be made up of 50 mm thick wall panels. The panels will be made of 0.50 mm thick hot dipped galvanized steel sheets on both sides with 60 mm thick layer of rigid CFC free close cell polyurethane foam (Density 40 Kg +- 2Kg/Cum) insulation. The wall panels will be provided with tongue and groove joint and will be new and shall comply with relevant Bureau of India Standard specification. Base and Top channel of size 30 x 65 x 1.25 mm thick will be provided for fixing of wall panels.The PUF insulation material in the panel will have fire retarding and self extinguishing properties

WALL PANEL: The walls will be made up of 60 mm thick wall panels. The panels will be made of 0.50 mm thick hot dipped galvanized steel sheets on both sides with 60 mm thick layer of rigid CFC free close cell polyurethane foam (Density 50-40 Kg +- 2Kg/Cum) insulation. The wall panels will be provided with tongue and groove joint and will be new and shall comply with relevant Bureau of India Standard specification. Base and Top channel of size 30 x 65 x 1.25 mm thick will be provided for fixing of wall panels.The PUF insulation material in the panel will have fire retarding and self extinguishing properties

WALL PANEL: The walls will be made up of 80 mm thick wall panels. The panels will be made of 0.70 mm thick hot dipped galvanized steel sheets on both sides with 80 mm thick layer of rigid CFC free close cell polyurethane foam (Density 60 Kg +- 2Kg/Cum) insulation. The wall panels will be provided with tongue and groove joint and will be new and shall comply with relevant Bureau of India Standard specification. Base and Top channel of size 30 x 65 x 1.25 mm thick will be provided for fixing of wall panels.The PUF insulation material in the panel will have fire retarding and self extinguishing properties

P/F of (Acoustics ceiling) GIP board fiber square pipe with 24mm grid section for ceiling of size 595x595x15mm thick is to be installed on frame work of Acoustics sktel (concealed grid system to be used ) which will comprise of NRC 1base panel with humidity resistance of 90% RH & light reflectance up to 85% with lead points green performance certified fiber 15mm for ceiling tile rating for flame test with complete framework of skillet as per installation with cove design all complete job

Providing and laying roof insulation with 40mm hick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS-14432 Pt.III (density of foam being 40-45kg/cum0, over a coat of polyurethane primer applied @ 6-8 sqm per liter, laying 400G polythene sheet over PUF spray and providing a wearing course of 40mm thick cement screed 1:2:4 (1cement: 2 coarse sand: 4 stone aggregate 20mm nominal size) in chequered rough finish, in panels of 2.5 m×2.5 m and embedding with 24G wire netting and sealing the joints with polymerized mastic, all complete.

Providing and fixing of wooden planks (Fir wood) 20mm thick including cost of nails and Scaffolding, all complete.

Providing and fixing of superior type of MDF Wall/Floor panneling, 8mm thick with joists for interior walls of pre fab structure.

Windows: Aluminium Bombay Slinding powder coated with mesh windows of aluminium anodized of extrusions powder colour coated of desired dimensions with all other requisite accessiors (complete)

Earth work in excavation in all Kinds of soil by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to

Supplying /filling dry stone soling tightly hand packed under foundation & under floors including all leads, lifts and all carriages upto site of work complete

Centering and shuttering including strutting ,propping etc. and removal of form work for: foundation, footing ,bases for columns

for Beams , columns, peirs, etc

Supply and filling of Nallahmuckh

15mm thick cement Plaster in cement mortar 1:4 mix

Providing & fixing Ist quality ceramic glazed Wall tiles confirming to IS: 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all color shades of any size as approved by the Engineer In charge in walls, Dados etc over 12mm thick bed of cement mortar 1:3 (1 cement: 3 Coarse sand) & jointing with Grey cement slurry @ 3.3 kg/sqm incl. pointing in white-cement mixed with pigment of matching shade complete.(600mmx300mm)

Filling available excavated earth (excl. rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead up to 50 m and lift up to 50 m.

Providing & laying in position cement concrete of specified grade excl. the cost of centering & shuttering. All work upto plinth level a)1:4:8 {1 cement: 4 coarse sand: 8 graded crushed stone agg. 40mm nominal size

b)1:3:6 {1 cement: 3 coarse sand: 6 graded crushed stone agg. 40mm nominal size

c)1:2:4 {1 cement: 2 coarse sand: 4 graded crushed stone agg. 20mm nominal size

Providing & laying in position specified grade of reinforcement concrete excl. the cost of centering & shuttering , finishing and reinforcement. All work upto plinth level a)1:2:4 {1 cement: 2 coarse sand: 4 graded crushed stone agg. 20mm nominal size

b)1:1.5:3 {1 cement: 1.5 coarse sand: 3 graded crushed stone agg. 20mm nominal size

Providing & laying in position cement concrete of specified grade excl. the cost of centering & shuttering. All work upto plinth level.(Plum concrete using 20 % plums) 1:3:6 {1 cement:3 coarse sand:6 graded crushed stone agg. 40mm nominal size incl.all Carriages complete.

b)P/F up to floor-5 level Precast cement concrete Hallow blocks including hoisting and setting in position with cement morter 1:3(1cement:3course sand),cost of required centering and shuttering complete.

Reinforcement for R.C.C. work incl. straightening, cutting, bending, placing in position & binding all complete mild steel & medium tensile steel bars.

P/L of vitrified floor tiles of size 60x60 cm with water absorption less than 0.08% &confirming to IS:15622 of approved make &colour laid 0n 20mm thick cement motor including grouting the joints with white cement & matching pigment complete job(60x60cm) Kajaria, Somany or equivalent

CONSTRUCTION OF SOAKAGE/SEPTIC Tank including excavation, soling, concreting with all fittings Complete Job

Providing and laying damp proof course with cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded crushed stone aggregate 20 mm nominal size) a) 50 mm thick

Rewedging of door /window

Providing and fixing of glass panes a) 3.5mm

Providing and fixing of PVC fitting a) 4" PVC pipe

b) 3" PVC pipe

c) W. S Junk

d) 4" P-bend

e) 4" D-bend

f) 4" Collar

g) 3" P-bend

h) 3" D-bend

3" Collar

Providing and fixing of PPR fitting a) 40 mm

e) Union 40 mm

f) Union 30 mm

g) Union 15mm

Fitting with GSB

Construcion of mainholes of various sizesz a) 1'x1'

Boring, Providing & installation of bored cast in site R.C.C pipe of sp- grade cone mix, dia & length below vide cap to carry a single working load including c/o boring (DLHC)compete job a) 450mm

vertical laod testing of piles including installation f loading platform by kent/ edge (anchor pile per test)

Making plinth protection 50 mm thick of cement concrete 1:3:6 {1 cement:34 coarse sand:6 graded stone agg. 20mm nominal size ) over 75 mm bed ofdry brick ballast 40 mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth.

Brick work with F.P.S. bricks of class designation 75 in super structure above plinth level up to floor Five level (by manual means) in cement mortar 1:6 (1 cement: 6 coarse sand)

Random Rubble Masonry in cement mortar 1:6 (1 cement:6 course sand) with hard stone from quarry in foundation and plinth including leveling up with cement concrete 1:6:12 {1 cement:6 coarse sand:12 graded stone agg. 20mm nominal size at plinth level

b)Dry random rubble masonry in foundation and plinth using quarry stone with bond stone.

Providing and laying (fine chissel dressed). Devri stones up to floor five level in cement mortar 1:6 (1 cement:6 course sand) incl. Pointing with white cement mortar 1:2 (1white cement:2 stone dust) with an admixture of pigment matching the stone shade ,incl. all carriages up to site of work complete

Cornice of desired design and size.

Marble work gang saw cut (polished and machine cut) for wall lining (Veneer work) in cement mortar 1:3 (1cement:3 course sand) incl. pointing with white cement mortar 1:2 (1 white cement:2 marble dust) with an admixture of pigment to match the marble shade :(To be secured to the backing by means of cramps, which shall be paid for separately) Raj Nagar plain white marble / Udhaypuri green marble / Zebra black marble A)Area of slab up to 0.50 Sqm. 18 mm thick.

Providing and fixing gang saw cut granite work mirror polished (pre moulded and pre polished), machine cut for Kitchen platform, vanity counters, window sills, facias and similar locations of reqd. size and approved shade, color and texture laid over 20 mm thick base cement mortar 1: 4 (1ccement:4 course sand) with joints treated with white cement, mixed with maching pigment, epoxy touch ups, incl. rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels Raj Nagar plain white marble / Udhaypuri green marble / Zebra black marble A)Area of slab up to 0.50 Sqm 18 mm thick.

Extra for providing edge moldings to 18 mm thick marble stone counters, Vanities etc. Over above Items incl. machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. a) Marble work. b) Granite Work.

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 20mm nominal size -crushed) finished with a floating coat of neat cement incl. cement slurry, but excl. the cost of nosing of steps etc. complete a) 50mm thick. Crushed.

b) 40mm thick crushed.

03 Chequered precast cement Concrete tiles 22mm thick in foot path & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, incld. Rubbing polishing Curing complete on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand)

05 Kota stone flooring 25mm thick over 20mm Cavg) thick base laid over &poited with grey cement slurry mixed with pigment to match the shade of the slab, incl.rubbing polishing & curing complete with base of Cement mortar 1:4 (1 cement:4 coarse sand).

12mm cement plaster of mix

a)1:4 (1 cement :4 fine sand)

b)1:6 (1cemnt :6 fine sand

Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

White washing with lime to give an even shade. New work a)(Three or more coats)

Distempering with dry distemper of approved brand and manufacture (Two or more coats) and of reqd. shade on new work, over and incl. priming coat of whiting to give an even shade

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (Two or more coats) over and incl. priming coat with cement primer.

Distempering with Ist. Quality acrylic washable distemper (ready made) of approved manufacture and of reqd. shade / colour complete as per manufacturer’s specifications. A)Two or more coats on new work.

b)One or more coats on old work.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surfaces. Cement primer.

Dewatering with pumps of adequate HP including Suction Delivery Pipe & Dg set man power all complete job.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade. a) New work (Two or more coats)

b) Old work ( One or more coats)

Melamine polishing on wood work (one or more coats)

Renewing glass panes, with putty and nails wherever necessary.a) float Glass panes of thickness 4mm

b) float Glass panes of thickness 5.5 mm

Dismantling wood work in frames,trusses,purlins and rafters upto 10 meters span and and 5 meters height including stacking the material within 50 meters lead. Of sectional area 40 sq. centimetres and above

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 meters lead of : a) G.S. Sheet

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 mts lead.

Supplying and stacking of Good Earth at site, excluding carriage.

Providing and fixing G.I chain Link fabric fencing of reqd. width in mesh size 50 x 50 mm incl. strengthening with 2 mm dia. Wire or nuts, bolts and washers as reqd. complete as per direction of Engineer-in-charge.(made of G.I wire of dia. 4 mm)

Providing and fixing of 50mm thick Pre-cast interlock tile flooring, jointing with dry sand on top and cement concrete M-15 grade on ends including all carriage lead and lifts complete.

P/F water closet squatting pan (Indian type W.C pan) with 100 mm sand cast iron P or S trap, 10 litre low level P.V.C flushing cistern including flush pipe (of approved make)manually controlled device (handle lever) confirming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. a)Long pan pattern white vitreous china W.C pan of size 580 mm.

b)Orissa pattern white vitreous china W.C pan of size 580 x 440 mm with integral type foot rests.

P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing cistern with C.I /M.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (One urinal basin with 5 liter P.V.C white automatic flushing cistern of approved quality.)

P/F Salem stainless steel A ISI 304 (18/8) kitchen sink as per I.S:13983 with C.I Brackets and stainless steel plug 40 mm including painting the fitting and brackets, cutting and making good the walls wherever required. kitchen sink with drain board.610 x 460 x 200 mm

P/F white vitreous china pedestal type (European type/wash down type) water closet pan.

P/F 10 litre capacity white colour P.V.C low level flushing cistern with manually controlled device (handle lever) confirming to I.S:7231, with all fittings and fixtures complete.

P/F white vitreous china wash basin including making all connections but excl. The cost of fittings. Flat back wash basin of size 630 x 450 mm

P/F 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete.

P/F G.I pipe (Concealed work) including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall. A)15 mm dia

b) 20 mm dia.

P/f fallowing C.P brass fittings of approved manufecture.

a) 15 mm dia bib cock

b) 15 mm dia angle valve

c) 15 mm dia wall mixer

d) 15 mm dia. Basin mixer

e) 15 mm dia stop cock

g) Soap case

h) Health Faucet

i) Towel ring

LUMBER INDIA CORPORATION (BID ID -2436300)

M/S VISION INDIA CORPORATION (BID ID -2436174)

New Pamposh Joinery and furniture (BID ID -2434478)

M/S M.Z ENTERPRISES (BID ID -2439318)

M/S STEEL WORLD (BID ID -2437325)

M/S NAZIR AHMAD KAR (BID ID -2437934)

M/s REHMAN ENGINEERING WORKS (BID ID -2438125)