Construction of a new culvert to replace the narrow and damaged culvert at kilometer 09 on the Nayagaon Makdoompur road in Meerut district

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.As per Reference to MORT&H Specification 2100 SN.9.40 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Supply of 1200 mm dia NP-3 Hume pipe (S&S type)

Laying of 1200 mm dia NP-3 Hume pipe (S&S Type) in position (Labour Only) including labour and T&P etc required for completion of the work (SI. No. 10.ix)

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications. As per Reference to MORT&H Specification 1300 SN.9.5 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus..(SI. 574)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Lead up to 5.00 Km distance)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. For grading-I Material

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.As per Reference to MORT&H Specification2504 SN. 1540 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

RCC Grade M30 using batching plant transit mixer & manual placing RCC work in Grade M 30 in Open Foundation & Sub Structure with cement approved coarse sand & two cm gauge well graded grit including necessary shuttering placing & binding of reinforcement including its binding with wire but excluding cost of reinforcement & also including supply of all material , labour , T & P etc.required for completion of work. As per Case II MORTH specification 1500, 1700 & 2100. SN.12.80 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

RCC Grade M30 using batching plant transit mixer & manual placing RCC work in Grade M 30 in Super Structure with cement approved coarse sand & two cm gauge well graded grit including necessary shuttering placing & binding of reinforcement including its binding with wire but excluding cost of reinforcement & also including supply of all material , labour , T & P etc.required for completion of work. As per Reference to Case II MORTH specification 1500, 1700 & 2100. SN. 12.80 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Supplying, fitting and placing Mild steel reinforcement complete in sub-structure and Foundation as per drawing and Technical Specification Section As per Reference to MORT&H Specification1600 & 2200 SN. 12.41 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Drainage Spouts complete as per drawing and Technical specification.As per Reference to MORT&H Specification2705 SN. 14.90 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. As per Reference to MORT&H Specification2706 & 2200 SN. 13.80 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. As per Reference to MORT&H Specification 800 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing, laying and spreading of graded stone aggregate (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in unform single layer on sub-base /subgrade and compacting with the road roller to achieve the desire density.

Providing and applying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen (VG-10) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of 120 tonnes/hour capacity, laying with paver finisher and rolling with a smooth wheeled roller, finished to required level and grades.

Providing and laying of premix seal coat with HMP of 120 tonnes/ hours capacity using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade.( Type B)