Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC PEMASAR ROAD WARD NO 04 UDASAR BIKANER RAJ 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹39.3 L+₹4.9 L (14.3%)Rejected-Finance | L2 | Rejected-Finance DUE TO NOT LOWEST | |
| 3 | L3₹40.2 L+₹5.8 L (16.9%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance DUE TO NOT LOWEST | |
| 4 | L4₹41.9 L+₹7.5 L (21.8%)Rejected-Finance | L4 | Rejected-Finance DUE TO NOT LOWEST |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
24 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Bikaner
GE North Bikaner
SPL REPAIR AT BLDG NO P2 FOR SINGLE OFFRS LIVING WITHIN OFFRS MESS AND PROVISION OF CERTAIN DEPOSIT WORKS IN KV No 2 AT BIKANER MIL STN UNDER GE NORTH BIKANER
2022_MES_548034_1
GE (N) BKN TOKEN NO 50 /2022-2023
Open Tender
Civil Works
Item Rate
180 days
BIKANER
AS PER NOTICE OF TENDER
8 documents required · 8 mandatory
₹500
GE North Bikaner
₹84,000
Yes
14 Dec 2022
27 Aug 2022
1 Oct 2022
27 Aug 2022
24 Sept 2022
10 Sept 2022
Amount
Dismantling of Roof tiles of any description or thickness in floor, roof, apron etc laid, bedded and pointed in any mortar complete.
Demolition of lime concrete of any description over roof slab complete all as specified by Engineer-in-Charge.
M&L for 10mm thick rendering (screeding) over roof slab in CM 1:6, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished fair & even, complete all as specified and as directed.Note : Supply only integral liquid water proofing compound shall be measured and paid for separately.
Supply only liquid water proofing compound ISI Mark complete. Make: Dr. Fixit or Equivalent.
M&L for cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminous primer @ 0.40 litre/sqm and provide a layer of APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick, reinforced with polyester non woven fabric (weighing not less than 150 gms/sqm) laid on primed surface complete all as described in Para 11.44.5 of SSR Part-I, complete all as specified and as directed. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps.
M&L for Lime concrete terracing in roof with minimum thickness at edge 40 mm and increasing uniformly towards ridges to obtain a chain slope of (1:40) as described in Para 11.27.2 of MES Schedule Part-I complete all as specified & as directed.
M & L for 40 mm thick brunt clay brick tiles bedded on cement mortar and joints grouted flush in cement and sand mortar (1:3) mixed with integral water proofing compound IS 2645 : 2003 @ 3% by wt of cement as Complete all as specified and as directed..
ditto complete all as per Item No 8 above but except tiles complete all as specified.
Dismantling floor, hearth or wall tiling any type including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the primises Complete.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.
S&F non skid coloured ceramic tiles of 7 mm to 8 mm thick (square/rectangular) polished, area of each tile exc 0.18 not exc 0.38 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match.
All as above item but as in skirting/dado over and incl 10 mm thick rendering in CM 1:4 all as specified and as directed.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (squar/ rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over 15mm thick screed bed in cement mortar 1:6 complete all as specified.
M & L for coloured Glazed ceramic tiles 450mm x 350mm x 7mm OR 300mm x 450mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the floor as on vertical surfaces laid over 10 mm thick cement plaster in 1:4 complete all as specified.
M & L for 25 mm thick Cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate in floors to receive finished even and smooth using extra cement complete all as specified.
M&L for 16 to 18mm thick Granite (of any type) machine cut slab of approved shade (table rubbed and mirror polished) with true & uniform joints as in steps, jambs, pillars, window cills, cooking platforms & like and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15mm thick screed bed (bedding layer) in CM 1:4 with cement slurry @ 3 Kg/Sqm complete all as specified & as directed.
Taking down shutter of any description exc. 1 Sqm but not exc.2 Sqm each and refixing in the same opening after necessary easing, repairs, adjustment etc. complete all as specified.
Taking down chowkhats or frames not exc. 1.50 Sqm each but with shutter (with out taking of shutter from the frame ) and making good the surface of walls as per existing with cement mortar complete.
Taking down chowkhats or frames exc. 1.50 Sqm each but n.exc 4 Sqm with shutter (with out taking of shutter from the frame ) and making good the surface of walls as per existing with cement mortar complete all as specified.
Taking down shutter of any description exc. 1sqm but not exc.2 sqm each complete all as specified.
S & F for pressed steel frames of size 125 x 60 mm with one or more rebates including necessary fixing lugs hinges, locks trike plate etc (thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified.
S & F for pressed steel frames of size 105 x 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all specified.
Cutting holes in brick walls in cement mortar exc half brick but not exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified.
S & F for Mild steel in bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required, hooks and pintal hinges, large hasp and stapals, chains hand made sliding bolts, clamps, hold fast,wall ties, hooks for hanging fans, plain angle cleats for securing purlins to woods trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articals conforming to Fe 290 Gde-E-165 complete all as specified.
M & L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in fixing Holdfast, Plinth courses, bed plates, string courses, coping, filling of chowkhats etc., complete all as specified and as directed by Engr-in-Charge.
S & F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated.
S & F 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars) complete all as specified.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6 all as specified and as directed.
S & F factory made solid panel shutter (PVC) 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications.
S&F rubber gasket of 2.5mm thickness (minimum) and width 60mm, fixed with steel screws or black nails with plate washers to wooden doors to cover the gap between door and floor complete all as specified & as directed.
M & L stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.
M & L stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repairs complete all as specified.
S & F for 100 mm long powder coated Aluminium Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.
S & F for 150 mm long, aluminium, powder coated, barrel tower bolts of extruded section complete all as specified.
S & F for 150 mm size aluminium powder coated handles, cast type, anodised complete all as specified.
S & F for 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified.
S&F in repairs stainless steel Peg Set of Six of standard size (not less than 300mm long) fixed to wall with two rawl plugs and chromium plated brass screws complete all as specified & as directed. Make :- Cat Part No. BEA-30 of Prayag or equivalent in makes mentioned in Appendix ‘B’ here-in-after.
S&F iron body capsule door closure of best quality for glazed & skeleton door shutters, standard size, conforming to the sample kept in GE’s office, complete all as specified and as directed.
S & F for 300mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified.
M&L for complete removal of existing treatment on wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer including finishing with wooden putty after preparation of surfaces complete all as specified & as directed.
M & L for preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
M & L preparation of old steel surfaces of any description, over 10 cm in width or girth, and applying one coat of synthetic enamel paint incl preparation all as specified.
S & F for 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane complete all as specified.
S & F for 4mm thick pin headed sheet glass, ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane complete all as specified.
Demolition of brick work or stone boulder masonary of any description in and any position built in cement mortar or cement lime mortar complete.
M & L Brick work with fly ash brick, old sized ,straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified.
M & L Brick work with fly ash bricks (Half brick), old sized straight or curved on plan exc. 6 m mean radius built in CM 1:4 complete all as specified.
Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete.
S & F GI tubing 15mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
Fixing only of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) complete
Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete.
S & F for GI tubing 20mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
Fixing only of old steel GI tubing, 20mm bore and connections in new or old position (walls, ceiling, floors etc) complete all as specified.
Taking up or down 25 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified.
S & F for GI tubing 25 mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
Fixing only of old steel GI tubing, 25 mm bore and connections in new or old position (walls, ceiling, floors etc) complete all as specified.
M&L for 18mm thick Medium Density Fibre board, exterior grade, ISI marked, veneered with decorative face veneers one face, fixed to timber framework with screws, as in cupboard shutters, shelves, Kitchen cabinets, drawers and similar works, complete all as specified & as directed.
S&F butt hinges of size 75mm, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and as directed.
S&F 100mm size extruded brass handle, fabricated type polished complete all as specified and as directed.
S & F 100 mm hasp and staple brass incl bolt to hinge plate and fixed with screws safety type.
S&F in repairs 15 mm bore bib tap, brass, chromium plated, long body, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, including CP brass wall flange, complete all as specified & as directed.
S&F in repairs 15mm bore Angle stop valve, brass, chromium plated, fancy type, screwed down, high pressure with capstan head, screwed both ends for iron pipe or for union, including CP brass wall flange, complete all as specified & as directed.
S&F in repairs 15mm bore two way Angle stop valve, brass, chromium plated, fancy type, screwed down, high pressure with capstan head, screwed both ends for iron pipe or for union, including CP brass wall flange, complete all as specified & as directed.
S&F in repairs Shower rose, round type, brass, chromium plated, Fancy type, 100 mm dia (minimum) with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe of 15mm bore or union complete all as specified and as directed.
S&F in repairs Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, complete all as specified and as directed.
S&F in repairs tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and as directed.
S & F as in repair, gun-metal, of 20 mm globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.
S & F as in repair, gun-metal, of 25 mm globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.
Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top), ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed.
S & F 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/40mm- 690 gms/50mm-1240 gms) all as specified.
S & F as in repair, PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete. Make: Prayag/Polytuf or equivalent as approved by Engr-in-Charge.
S & F as in repair, 75 mm dia CI floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.
S & F stainless steel grating suitable for 100 mm dia bore fixed with white cement with outer square frame, complete all as specified as directed by Engineer-in-charge .
S & F stainless steel grating suitable for 100 mm dia bore with hole fixed with white cement with outer square frame, complete all as specified as directed by Engineer-in-charge .
M & L for 75mm thick PCC 1:3:6 C2 using 40 mm graded stone aggregate as in plinth protection laid in panels and finished even and smooth without using extra cement complete all as specied and directed.
Dismantling of cast iron drain pipe of 100mm bore, jointed in CM and taking out of trenches or floors, if required, complete all as specified & as directed. Note :- Excavation & earthwork shall be measured and paid separately.
Supply and fixing 100 mm bore cast iron, soil, waste & vent pipes in any length with or without ears, spun pipes, ISI marked, fixed with cement joints, laid in trenches or floors, complete all as specified and as directed.
Supply and fixing 100 mm bore cast iron, soil, waste & vent pipes in any length with or without ears, spun pipes, ISI marked, fixed with cement joints, fixed to walls, complete all as specified and as directed.
-do- but except pipes
Dismantling of cast iron drain pipe of 75mm bore, jointed in CM and taking out of trenches or floors, if required, complete all as specified & as directed. Note :- Excavation & earthwork shall be measured and paid separately.
Supply and fixing 75 mm bore cast iron, soil, waste & vent pipes in any length with or without ears, spun pipes, ISI marked, fixed with cement joints, laid in trenches or floors, complete all as specified and as directed.
Supply and fixing 75 mm bore cast iron, soil, waste & vent pipes in any length with or without ears, spun pipes, ISI marked, fixed with cement joints, fixed to walls, complete all as specified and as directed.
-do- but except pipes
Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 75 mm pipe.
Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 100 mm pipe.
S & F in repairs 100 mm dia branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door all as specified.
S & F in repairs 75 dia branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door all as specified.
S&F in repairs 75 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified.
S&F in repairs 75 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) without oval access door complete all as specified.
S & F in repairs 100 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified.
S & F in repairs 100 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) without oval access door complete all as specified.
S & F in repairs 100 mm bore CI tee (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified.
S & F in repairs, 100 mm CI bends (any radius) with duck's foot or heel rest complete all as specified.
S & F as in repair, 100 mm cast iron sanitary connection socket in fit WC out-let complete all as specified.
S & F for cast iron vent cowls 100 mm dia complete all as specified.
S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof for 50 mm bore all as specified.
S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof 75 mm bore all as specified.
S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof 100 mm bore all as specified.
Taking down PVC pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)
S & F for PVC (SWR) 100 mm dia single socket in any length with rubber ring joints fixed to wall incl SS clamp complete all as specified.
S & F for PVC (SWR) 100 mm dia bend of any radius fixed to wall Complete.
S&F in repairs stainless steel drapery rod of 25mm inner dia & 1.6mm wall thickness (in lengths as directed) with & including stainless steel sockets & decorative finial at both ends and pair of stainless steel brackets & stops fixed at both ends with PVC rawl plug & steel screws on walls/beam complete all as specified & as directed. Notes : (i) The weight of each bracket shall not be less than 100 gm. (ii) Length of steel screw shall not be less than 65mm.
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & as directed.
S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, white, size 580x440mm with integral foot rests, ‘P’ or ‘S’ trap, including connection to trap and flushing pipe, antisyphonage pipe etc, making good to floor in CM 1:3, complete all as specified and as directed.
S & F PVC valve less, syphonic action type, fluhsing cistern, 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including 32mm bore PVC flushing pipe, brackets and fixed in repairs including taking down existing flushing cistern of any description complete all as specified.
Taking down cement plaster/terrazo finish on brick or stone walll etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed
M & L for 10mm thick Rendering in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specied and directed.
M & L for 15mm thick Rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces,incl water proofing liquid finished even & smooth without using extra cement complete all as specied and directed.
M & L for 5 mm thick Rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specied and directed.
M & L for rendering 10mm thick in cm 1:4 as setting coat and 5 mm thick in cm (1:4) as finishing coat as in chajja with WPC. Note: - WPC should be measured and paid separately.
M & L for two coat of cement base paint over a coat of primer as per manufacturer's instructions incl preparation of newly plaster surface complete all as specified.
M & L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of whiter wash complete all as specified.
M & L for preparing new plastered or surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & incl a coat of primer over & incl 3mm thick Birla white putty complete all as specified.
M & L for preparation of old surfaces by complete removal of existing treatment of walls incl paillars etc. by mechanical equipment like electric wall sander and applying two coats of oil bound distemper using rollers over a coat of primer incl two coats/layer of wall care putty complete all as specified and as directed by Engr-in-Charge.
M & L for two coat of cement base paint over a coat of primer as per manufacturer's instructions incl complete removal of existing treatment by mechanical equipment like electric wall sander complete all as specified.
M & L for framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 incl dismantling the same complete all as specified.
Removing building materals etc., (other than spoil payable under items 99 to 102 in Section 3-Earthwork) to a distance 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified.
M&L for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & as directed.
M&L for anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & as directed.
Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20 cm girth complete all as specified.
S&F Steel Fibre Reinforced Concrete (SFRC) manhole cover and frame, Light duty (LD-2.5 grade designation) of 560 mm internal dia, conforming to IS-12592, ISI marked, fixed in position with cement mortar (1:4)/PCC type B-1 complete all as specified and as directed.
S&F aluminium frame powder coated of any colour as approved (Thickness of powder coating not less than 50 micron) for doors, windows, ventilators, partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. Note : Frame to walls etc shall be fixed with PVC rawl plugs and steel screws of length not less than 75mm at places as directed. Quoted rate shall deemed to include the same.
S&F aluminium window and ventilator shutters, powder coated of any colour as approved (Thickness of powder coating not less than 50 micron), side hung type without sash bars, aluminium sections including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws, complete all as specified & as directed. Note : Glass and rubber neoprene packing / rubber gasket shall be measured and paid for separately as “Supply only” under respective item of this Schedule.
Supply only rubber neoprene packing / rubber gasket of required size & profile suitable for glazing etc in aluminium frame work in doors, windows, etc complete all as specified & as directed.
Supply only plain sheet glass 5.00 mm thick ordinary quality in required sizes, not exc 0.5 sqm in each pane, complete all as specified and as directed (for aluminium windows/ventilators).
S&F salt glazed stone ware drain pipes of 150mm bore, Class ‘SP 2’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified & as directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in bedding to SGSW drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed.
Forming jambs, etc. in CM 1:4, to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/loose soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering & removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed by Engr-in-Charge
M&L PCC 1:2:4 type B-1 (20mm graded stone agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapet and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge.
M&L Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240
S&F Mild steel Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')
S&F Mild steel Rolled sections as in main and cross beams,hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.
M&L for Mild steel work conforming to Fe-290 Gde E-165 in wind ties for roof including securing bolts including all necessary drilling, bolting or riveting etc complete.
M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of sand colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge
M&L Preparation of newly steel Surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified.
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft and loose soil.
M&L 100 mm PCC 1:4:8 type D-2 (40mm graded aggregate) as in Sub base,floor etc.
M&L for 75mm thick Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in floors and paving, laid in panels and finished even & fair complete.
M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) and finished even & smooth without using extra cement complete.
M&L Plastic dividing strips,1.5mm thick & 38mm wide complete all as specified and directed.
M&L Removal excavated material n. exc 50 mtr and deposited where directed at a level n exc. 1.5m above the starting points.
M&L Demolition of stone slabs and tiles of any description or thickness in floors laid , bedded and pointed in any mortar.
M&L Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade
M&L 25 mm th Sand filling under floors or in foundations including watering and consolidation
M&L Providing precast cement concrete 1:2:4, type B-1 as in kerb stone, fair faces, including chamfers, weatherings, throat-ing etc. and setting in CM 1:4.
M&L 75 mm bore PVC(SWR) pipes single socketed, in any length fixed across the interlock path for weep holes.
M&L applying two coats of synthetic enamel paint over a coat of primer on new surface of stone , concrete or plastered surface of kerb stone including preparation of surface complete all as specified and directed.
M&L 75 mm thick Broken stone hardcore of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15mm thick, watered and rammed to a true surface complete all as specified.
Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.
Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed.
Taking down old U/S existing DB TPN 4 way and DB SPN 8 way including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.
M & L for point wiring with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC concealed conduit with accessories with laminated top cover fixed on GI sunken box with modular cover plate for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed by Engr-in-Charge for the following :- (a) One Light/fan/ex-fan/Bell/point controlled by one switch.
(b)One pin 5 amps socket point on the same board with other switches complete
(c) One 3 pin 5 amps socket on independent board.
all as per item No 4 above but with 4.0 sqmm copper wire for 3 pin socket outlet 20 Amp on independent board complete and all as directed by Engr-in-charge.
S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.
S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.
M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.
M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.
S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.
supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.
supply and fixing Bell push, flush type, 5 amp 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.
supply and fixing Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed by Engr-In-Charge.
Supply and fixing LED mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.HAVELLS CAT PART NO-ENDURALINEARNEOBS10WLED865SPCWH/WIPRO CAT PART NO-LL20-111-XXX-65NE3/BCLSB 10 WH
Removing and Refixing LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.
M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings
S&F sheet metal enclosure MCB DB, double door, vertical TPN 4 way with 200 Amps rated busbar all as specified and as directed. Make:- Hegar/Legrand/Seimens
S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.
S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.
S & F MCB DP,D CURVE 40 Amps , 240 volts, complete all as specified and as dircted by Engr-in-charge.
S&F MCCB 100 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.
M&L for submain wiring using 2 runs of single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 2runs of 10 Sqmm of voltage rating 1100V for Single phase & neutral, drawn in and including concealed PVC conduit of dia not less than 25 mm dia with standard acessories, along with two run of FRLS PVC insulated, unsheathed, stranded copper conductor of size 2x 10.0 Sqmm as earth continuity conductor all as specified and directed(Note-2 runs of single core FRLS PVC cable 10sqmm for Single phase & neutral with Two run of earth conductor as earth and conduit shall be measured as one unit)
Taking down fan,sealing cable end,dismantling blades and removing fan and blades & refixing ceiling fan of any make, any sweep , keeping side in store in safe custody for painting of ceiling fan complete,in situ with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete including writing MES No at the site.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m
S & F water heater storage type 25 Ltr capacity, BEE 5 star and 8 bar pressure rated stainless steel (minimum wall thickness 2 mm) tank with feroglass coated inner container energy saving high density PUF insulation vertical ABS shock proof plastic body grouting of studs in wall in cement motar (1:3) nuts, washers, provision of two Nos PVC braided connection 450mm long heavy duty with brass nuts and two Nos brass chromium plated angular valve,thermostate,NRV ,TOP PLUG 20AMP with valve flange suitable for 15mm bore pipe for water supply connection complete. Make : Havells (Model -Monza EC) Cat part No GHWAMFSWH025/Bajaj calenta storage/Cromton solarium Qube
Supply & Fixed on walls and ceiling or laid in floor/in tranch and jointing GI tubes, 15 mm dia medium grade in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in wall complete all as specified and directed by Engr-in-charge .
supply and fixing Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.
M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.
Excavation in trenches n. exc 1.5 m in depth and not exc 1.5 m width for laying of cable lines etc and getting out in hard/ dense soil complete all as specified.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified.
Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 above the starting point complete all as specified and as directed by Engr-in-charge.
Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and as directed.
Supply and laying bricks (old size) for cable protection by using common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry flat across length of the cable with width of the trenches equal to length of bricks and all as directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.
S&F GI tubing light grade 40mm dia for protection of cable on pole/ wall etc complete all as specified and as directed by Engr in charge.
M/S BIKANER CHEMICAL LABORATORIES
durga construction company
ALPHA ENGINEERING COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .