SPECIAL REPAIR TO TOILETS IN CERTAIN BUILDINGS PHASE I AT AFS THANJAVUR

Amount

SCHEDULE 'A'

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and aprons removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes all as specified and directed.

M&L Non skid ceramic tiles, coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemnt to match the tiles all as specified and directed.

M&L Non skid ceramic tiles, coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemnt to match the tiles all as specified and directed.

M&L for backing coat /screed 10mm thick in CM 1:4 on fair faces of brick wall surfaces all as specified and directed.

M&L Glazed ceramic tiles area of each tile exceeding 0.08 Sqm but not exceeding 0.15 Sqm, coloured in vertical surfaces such as skirtings, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters(without taking off shutters from the frames) all as specified and directed.

Taking down shutters of any descriptions exc.1 Sqm and not exc.2sqm each and refixing in other opening all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck in side with solvent cement all as specified and directed..

S&F steel ventilator with top hung shutter incl hinges steel peg stay complete all as specified and directed.

S/F frosted glass for, 3mm thick , and glazing with oil putty in squares n.exc 0.50 Sqm in each pane all as specified and directed..

S&F Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21. with MS hinge pin 100 mm size all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm length all as specified and directed.

S&F aluminium anodised alloy handles fabricated type 150mm size of handle all as specified and directed..

S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section all as specified and directed.

S&F Health faucet , 15mm dia with flexible HDPE pipe and fixing nut etc complete fixed in repairs all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern, low level, 10 litres capacity, white, with inlet, ball, valve, float and handle including brackets fixed in repair all as specified and directed.

S&F Chromium plated shower rose with or without swivel joint,100 to 125mm size, including fixing to steel pipe or union, fixed in repairs all as specified and directed..

S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400mm including brackets all as specified and directed..

S&F in repairs vitreous china wash basin, white, Counter type, size 550 x 400mm including brackets all as specified and directed..

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) complete fixed in repairs all as specified and directed.

S&F in repair 15mm dia chromium plated angle valves cast copper alloy fancy type all as specified and directed.

S&F Bib taps, 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed.

S&F Pillar taps, fancy type, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs all as specified and directed.

S&F Stop valves, 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

S&F 15mm dia chromium plated cast copper alloy fancy type, two in one combination of bibtap and angle valve fixed in repairs all as specified and directed.

Taking up or down steel tubing and connections, bore of pipe 15 mm all as specified and directed.

Taking up or down steel tubing and connections, bore of pipe 20 mm all as specified and directed.

S&F 15mm bore steel water tubing medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F 20mm bore steel water tubing medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Taking down PVC SWR / rainwater pipes (any size or pattern) incl all fittings, heads shoes, bends, swan necks, etc., incl cleaning or refixing or removal to store all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length fixed to walls / floors all as specified and directed.

M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement all as specified and directed.

M/L for 2 coats of synthetic enamel painting over a coat of red oxide zinc chrome primer incl preparation of new or previously untreated steel surfaces of any description over 10cm width or girth all as specified and directed.

M&L of vitreous china urnials, bowl type 465x355265mm (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with including 60mm long brass screws, pointing around urinal back in cement: fixing in repairs automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (Excluding of flushing cistern, flush pipe and waste pipe etc.,) all as specified and directed.

M&L for vitreous China, squatting pan, ”ORISSA PATTERN” size 580x 440 mm white with integral foot rest complete, fixed in repairs all as specified and directed.

Taking down shutters of any descriptions exc.1 Sqm and not exc.2sqm each all as specified and directed.

Material and labour for 35mm thick second class hard wood glassed/ skeleton shutter open rebated and prepared to receive glass, gauge etc divided into square with plain chamfered rounded mitred and rebated, with out sash bar for door all as specified and directed. .

M&L PVC (SWR) gully traps 125 x 110 mm, setting and jointing with solvent cement all as specified and directed.

S&F 150mm bore PVC (SWR) pipes single socketed, in any length , laid in trenches or in floors all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floor incl necessary form work etc. all as specified and directed.

M&L for bitumin blown any grade, applied hot, two coat, to concrete surface at the rate of 1.5kg per sqm per coat all as specified and directed.

S&F 75mm dia PVC (SWR) vent cowl all as specified and directed.

S&F PVC (SWR) reducers110mm dia to 75mm dia all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore with access door all as specified and directed.

S&F 110mm bore PVC (SWR) junction, single (single Y) equal or unequal with access door all as specified and directed.

S&F 110mm dia PVC (SWR) junction, single (singleT) equal or unequal with access door all as specified and directed.

S&F PVC (SWR) bends any radius, 75mm dia with access door all as specified and directed.

S&F 75mm dia PVC (SWR) junction, single (single Y) equal or unequal with access door all as specified and directed.

S&F 75 mm dia PVC (SWR) junction, single (singleT) equal or unequal with access door all as specified and directed.

Taking drawn carefully old aluminium/copper point wiring for one light, socket or power etc incl all fitings such as switches sockets, holders, light fittings, fan requlators etc and making good the disturbed surface of wall ceiling complete all as specified and directed. .

M& L Point wiring complete with 1.5 Sq mm PVC insulated cable with copper conductor 1100 Volts grade, multistranded in and including PVC conduit and condiut accessories of 20 mm dia concealed in walls, roof etc with and including provn of 1.6mm thick MS terminal boxes concealed/surface in walls with 3 mm thick laminated hylam sheet top cover for fixing switches, switch sockets outlets etc including provn of 1.5 Sqmm multistranded copper conductor cable PVC insulated unsheathed as earth continuinity cable for one light /fan/exhaust fan point controlled by one switch complete all as specified and as directed by Engr In Charge.

All as per item No 57 mentioned here-in-before but for One socket outlet 3 pin 5 amps on same board all as specified and directed. .

All as per item No57 mentioned here-in-before but for One socket outlet 3 pin 5 amps on independent board all as specified and directed. .

All as per item No.57 above but with 2.5 sq mm cable for one 3 pin 15 amps switch socket outlet on independent board with 1.5 sq mm cable for earth wire drawn through and including 20mm dia PVC conduit and accessories all as specified and directed

S&F Switch piano flush button, white/ivory finish, 5/6 amps, single pole, one way complete all as specified and as directed.

S&F Switch socket combination, 2 and 3 Pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type white/ ivory finish complete all as specified and as directed.

S&F Switch socket combination, 2 in 1, 6 pin, 5/6 amps and 15/16 amps multipurpose, white/ivory finish, flush non shutter non inter locking type complete all as specified and as directed.

S&F Ceiling rose, surface Bakelite, large type, 220/240 volts, three terminals, white/ivory finish complete all as specified and directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole and neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators after and including taking down old DB with MCB complete all as specified and as directed.

S&F MCB, Single pole & neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed

Supply and fixing in replacement of LUMILINE PLUS wall mounted LED Batten 20 Watt LED, aluminium housing and integrated electronic driver complete all as specified and directed

Supply and fixing in replacement of LUMILINE PLUS wall mounted LED Batten 10 Watt LED, aluminium housing and integrated electronic driver complete all as specified and directed

Material and labour for earthing complete with galvanised steel plate electrodes of size 600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4.0mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron or steel all as shown in electrical Plate No-3 connected to earthing test point all as specified or indicated including testing on completion.

M&L for sub main wiring with 2 run of 6 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FR) of working voltage 1100 volts grade with stranded copper conductor including one run of 6 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly drawn with and including 20 mm dia PVC rigid non- metallic conduit after and including taking down / dismantling old sub main wiring including old conduit / casing capping / wooden batten etc of any description complete all as specified and as directed. Note: Three runs of cable and and one run of conduit shaall be measured as one unit

Dimantling and taking out Exhaust fan 230 volts any sweep any make cutting the old burnt winding rewinding with new super enamelled copper wire as existing guage including insertion of insulating papers threading and insulating with insulating warnish, lathe work, replacement of capacitor, replacement of gun metal bushes and painting after completion of rewinding process complete all as specified and as directed.

Total of Schedule 'A'

M/S. SRI RAMANUJA CONSTRUCTIONS

D.KUMAR