REPAIR/REPLACEMENT OF PCC FLOORING, TILING, AND CERTAIN MISCELLANEOUS REPAIRS IN VARIOUS BUILDINGS AT AIR FORCE STATION THOISE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engr-In-Charge.

M & L for Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set over rendering 10 mm thick in C:M 1:4 and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-In-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., over and inclding 15 mm thick screed bed in C:M 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-In-Charge.

M& L Non Skid ceramic joint free coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., over and including 15 mm thick screed bed in C:M 1:4 set and joint free in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-In-Charge.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42sqm, in floors etc., over tile over 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-In-Charge.

M& L Screed bed or bedding layer or layer of 1:4 mortar 25 mm thick for laying floor finishes complete all as specified and directed by Engr-In-Charge.

S & F Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-In-Charge.

Demolition of cement concrete (Un Reinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-In-Charge.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed by Engr-In-Charge.

M&L for 50mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring finished even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge.

Dismantling of cast iron or reinforced concrete drain pipes any dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engr-In-Charge.

S & F for PVC (SWR) pipes 110 MM bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-In-Charge.

S & F for PVC (SWR) pipes 75 MM bore single socketed, in any length with rubber ring joints, fixed on floor complete all as specified and directed by Engr-In-Charge.

S & F in Repair for vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, within tegral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-In-Charge.

Demolition of cement concrete (Reinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-In-Charge.

Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for Drain cover complete all as specified and directed by Engr-In-Charge.

M&L for RCC (1:2:4) type B1 ( using 20mm graded stone aggregete) as in slabs supported on walls and the like complete all as specified and directed by Engr-In-Charge.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed by Engr-In-Charge.

Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

Demolition of Pre cost concrete block masonry built in CM incl all quoins arches pillers etc but excluding ashlar facing dressed stone and pre cast concrete article complete all as specified and directed by Engr-In-Charge.

M&L for precast cement concrete block masonry with solid block, Type C1 1:3:6 (using 20mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:6 extra complete all as specified and directed by Engr-In-Charge.

M/L for External rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed by Engr-In-Charge.

M/L for Internal rendering 10mm thick on fair faces of brick work in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed by Engr-In-Charge.

M&L preparing newly plastered or unplastered surface of walls and applying two coats of cement base paint complete all as specified and directed by Engr-In-Charge.

M&L for preparation of newly plastered surface of ceiling including Chalk whiting, on plastered surfaces etc and applying two coat of white wash on walls, complete all as specified and directed by Engr-In-Charge.

Taking down chowkats or frames exc.1.5 sq.m but n exc 4 sq.m each(without talking off shutters from the frame) complete all as specified and directed by Engr-In-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-In-Charge.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed by Engr-In-Charge.

S&F 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed by Engr-In-Charge.

S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-In-Charge.

S&F Extruded Aluminium alloy handles, fabricated type, anodised 100mm size complete all as specified and directed by Engr-In-Charge.

S&F Butt hinges, medium weight coldrolled mild steel and fixed 75mm size complete all as specified and directed by Engr-In-Charge.

S&F in repair for Vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-In-Charge.

S & F in Repair for Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engr-In-Charge.

Taking down steel tubing dia 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-In-Charge.

Taking down steel tubing dia 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-In-Charge.

S&F for Galvanised steel tubes, mediam grade 15 mm dia complete all as specified and directed by Engr-In-Charge.

S&F for Galvanised steel tubes, mediam grade 20 mm dia complete all as specified and directed by Engr-In-Charge.

S & F in Repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed by Engr-In-Charge.

S & F in Repair Bib taps 15 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-In-Charge.

S & F in Repair Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-In-Charge.

M&L in repairs for 30mm thick wooden flooring planed one side as in floor, with butt joints and fixed with nails, complete all as specified and directed by Engineer-in-Charge.

S & F In Repair for PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-In-Charge.

MEDHI ALI GRONGPA

MS INFRATECH

NSK TRADER

M/S SHAMSHER ALI SUFI