PROVN OF FALSE CEILING AND WALL PANELING IN STN CONFERENCE HALL AND SPECIAL REPAIRS TO BLDG NOS P86 P36 AT 799 SU KURSEONG UNDER GE AF BAGDOGRA

Amount

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing and disposing rubbish off the premises.

Demolition of cement concrete (Un-reinforced ) in ground floors and paving n.exc 15cm thickness (below or above ground level) etc complete including dismantling of floor tiles etc complete all as specified and as directed

Taking down cement plaster of any description incl raking out joint hacking for key scrubbing down with water etc complete all as directed at site.

Taking down chowkats but with shutters (without taking off shutters from the frames) exc 1.5 sqm and n. exc 4 sqm each and removing from the site complete all a specified and as directed.

Taking down chowkats but with shutters (without taking off shutters from the frames) n exc 1.5 sqm each

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Sheet glass, 5.5mm thick, ordinary quality and glazing with rubber beading,cleats in necessary to aluminium door/windows etc area exc 0.5 sq. m in each pane complete all as specifed.

S&F figured glass, 4mm thick, pin headed type and glazing with rubber beading,cleats in necessary to aluminium door/windows etc area nexc 0.5 sq. m in each pane complete all as specifed.

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints wood and making good to wall.

S&F second class hard wood plain framed factory made panelled shutters 35mm thick (two number of panels ) with panel veneered particles board medium density with commercial face veneers to both faces complete all as specified.

S&F mild steel hold fast made of flat iron conforming to FE-290 Gde E-165 of size 25x3mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly tarred surfaces with clean sharp sand all complete as specified and as directed.

S&F 100mm size butt hinges medium weight cold rolled mild steel and fixed

S&F Aluminium anodized barrel tower bolts of extruded section and fixed 150mm long

S&F Aluminium anodized barrel tower bolts of extruded section and fixed 100mm long

S &F for 150 mm long aluminum anodised handle of extruded section fabricated type

S&F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

S & F 300 mm long aluminum anodised sliding door bolts with hasp,staple(bolt type) fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed etc complete

M & L for preparation new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L for Preparation of old painted wooden or wooden based surfaces of any description of follwing width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1(Using 20mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for Non skid ceramic tile 7-8mm thick (Square or rectangular)colour tiles in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with area exc 0.18 sqm but not exc 0.36 sqm in floors. .

M&L for 10mm thick rendering on fair faces of brick work or concrete surface built in cement mortar 1:6 as in backing coat of skirting.

M&L for screed bed or bedding layer in CM (1:4) 15mm thick on concrete surface.

S&F in repairs stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495mm x420mm, with bowl size 405mmx 355mm x 178mm with including waste coupling, waste pipe complete all as specified and directed.

M&L for 40mm dia Waste fittings,brass,chromium plated for sinks etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed.

S&F Tubular tower rail 20mm dia, D type , 60cm long between flanges aluminium anodized in repairs

S&F 40mm dia Low density polyethylene pipes(LDPE) of pressure rating 6kgf/cm2 fixed complete to walls,celings or in floors etc.

Supply & Fixed in repairs Bib taps, 15mm bore fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified .

S&F Grating doom 100 mm dia PTMT (Minimum Weight 25 gms)

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) 75mm thick as in plinth protection all as specified and directed.

M&L for PCC type C-2 ,1:3:6 (using 40mm graded stone aggregate) as in surface channells or drains etc all as specified and directed.

M & L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds, mitred/stopped ends etc all as specified and diracted.

M&L for applying two coats of oil bound distempering over a coat of 3mm thick cement based wall care putty including preparation of surface complete all as specified.

M&L for applying three coat of white wash on wall including preparation of new plastered surfaces.

M&L for applying three coat of white wash on ceiling including preparation of new plastered surfaces.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface built in cement mortar 1:6 surface finished even and smooth.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces built in cement mortar 1:4, surface finished fair and even wityh out using extra cement complete all as specified.(Note: Water proofing compound shall be measured and paid seperately as supply only).

M&L for 10mm thick rendering on fair faces of brick work or concrete surface built in cement mortar 1:6 surface finished even and smooth on ceiling.

Supply only integral water proofing compound ISI marked.

M&L for Prepration of old painited steel or iron surfaces as of any description over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified.

M&L for Preparation of new plastered or unplastered surfaces of wall and applying two coats of weather coat Anit fungal emulsion paint over a coat of weather coat exterior primer complete all as specified and as directed

Dismantling plain corrugated steel sheeting any gauge thickness,including nanital or similar pattern roof covering.

Dismantling wrought iron or mild steel old windows of any description not otherwise provided for

M&L for 100mm thick Plain cement concrete,Type B-1,1:2:4 using (20mm graded stone aggregate) as in floor finished even and smooth without using extra cement.

M&L for Prepration of old painited steel or iron surfaces as of any description n exc 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified.

S&F Wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165 all as specified.

S & F 0.63mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L-type or J-type pr crank hook bolts in lieu of screws in roofs etc with grade of zinc coating 275 all as specified.

S & F 0.80mm plain black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing etc all as specified.

S&F Solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as specification and as directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc as specified & directed.

M& L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for one light point / one fan point controlled by one, one way switch. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per item No.52 but for one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 52 herein before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

All as per ser item No. 53 here in before but on independent board.

All as per ser item No. 52 here in before but one light point controlled by 2 way switches.

Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.

Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in replacement of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin ) 5/15 Amps, 230V, AC.

Supply and fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

Supply and fixing in replacement of switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.

Supply and fix in replacement LED tube light fitting FOUR feet along with fixture, 20 W T8 tubular lamp with aluminium Extruded aluminium/PC Body Pc Diffuser complete with inbuilt driver along with batten with blue coloured end caps MAKE- Crompton Cat Ref- LDL-20CDL or Equivalent model of Philips/Havells as approved by GE

Supply and fix in replacement LED Tube light two feet along with fixture, 10 W lamp with aluminium Extruded aluminium/PC Body Pc Diffuser complete with inbuilt driver all in one fixtures. MAKE- Crompton Cat Ref- LDL-10CDL, or Equivalent model in Philips/Havells as approved by GE.

Supply & fixing in replacement of Pressure Die cast housing LED bulkhead 10 Watt with IP65 Protection and IK09 impact resistance suitable for surface and wall mounting application.Make crompton cat part number LBHP-10-CDL or equivalent model of Philips/Havells as approved by GE

Supply and fixing LED Flood light 150 Watt made up of pressure die cast aluminium housing with toughed glass and high power LEDs and secondary lenses with IP66 protection .system efficacy>110 LPW option for 3000K.10 KV SPD included. Make: CromptonCatNo.LFLN-CDL/60-M or equivalent model of Havells/Philips/Bajaj as approved by GE Note : Adequate size of bracket / clamps, nut, bolts, washers, etc required at site is deem to be included in 150 the quoted rate.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits of 25 mm dia including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earting cable and one run of conduit drawn in and caping will be measured as one lengt of sub main wiring. (ii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.

Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting MCB with front openable cover suitable for TP & N 4 ways all as specified & directed.

Supply and Fixing of MCB TPN 63Amps, 415 Volts, 50 Hz with 10 KA

Supply and Fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA

Supply and Fixing in replacement of MCB SPN/DP 6-32 Amps, 230 Volts, 50 Hz with 10 KA

M & L in replacement Earthing complete with copper earth plate electrode 60 cm X 60 cm X 3.15 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the Copper strip 20x3 mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.

M/S SUNNY ENTERPRISE

M/s Chakraborty Enterprise

M/S SWAPAN KUNDU

BEEPEE AND COMPANY

SARKAR ENGINEERING CO.

M/S IDEAL CONSTRUCTIONS

SHRI P P SHARMA