Joravasan-Surat Section - Providing ramp, tactile tiles,parking lot,slip resistance surface etc for divyangjan in various stations under DEN/C/MMCT.

Item Breakup - A-All DSR 2023 items

prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 1800 193.7 348660 22 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.2 Painting wood work with Deluxe Multi Surface Sqm 60 176.25 10575 Paint of required shade. Two or more coat 23 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (including cum 20 2434.25 48685 24 equivalent design mix) 15.3 Demolishing R.C.C. work manually/ by cum 25 3551.25 88781.25 mechanical means including stacking of steel 25 bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 15.23.2 For thickness of tiles above 25 mm and up to 40 Sqm 7200 113.35 816120 26 mm 15.60 Disposal of building rubbish / malba / similar cum 60 263.95 15837 unserviceable, dismantled or waste materials by mechanical means, including loading, 27 transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. 16.0 ROAD WORK 16.42S CONCRETE PAVEMENTS Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved and specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling 16.43 to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction and longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). 16.43.1 Cement concrete prepared with batch mixing cum 54 10529.35 568584.9 28 machine MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY 16.49S MISCELLANEOUS 16.62 Providing and applying 2.5 mm thick road Sqm 1200 747.8 897360 marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and 29 profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in- charge and accordance with applicable specifications. 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 Each 10 2648.85 26488.5 30 mm with a pair of 15 mm C.P. brass pillar taps 17.78 Providing and fixing white vitreous china Each 10 14999.15 149991.5 extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern 31 with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 18.8.3 25 mm nominal dia Pipes Metre 40 627.25 25090 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 33 18.49.1 15 mm nominal bore Each 10 506.8 5068 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw 26.87 withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 34 26.87.1 30 mm thick Sqm 20 4346.7 86934 Total 20789778.15

Item Breakup - B-All NS items

Rubble filling in foundations Total 68160.00 Item- 2 Providing and laying tactile tile S No. Item Description of Item Unit Qty Rate Amount No

Providing and laying tactile tile (for vision Sqm impaired persons as per standards) of size 300x300x25mm approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. Total 15913431.00