Laying of Distribution water Pipe line of 200mm 180mm 110mm HDPE Aathimarapatti In South Zone Ward 55

Amount

Supply and delivery of DUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASS K7 AS PER IS 8329/2000 and as amended time to time for Butt Joint.

250 MM DUCTILE IRON

Supply and delivery of DUCTILE IRON SPECIALS AS PER IS 9523/2000 and as amended time to time for Butt Joint.

Supply and delivery of HDPE Pipe as per IS 4984/2000 and as amended time to time for Butt Joint.

180 mm HDPE PN6

110 mm HDPE PN6

Supply and delivery of HDPE specials as per IS 4984/2000 and as amended time to time for Butt Joint.

180 mm HDPE Tee

110mm HDPE Tee

110mm HDPE Bend

180mm HDPE Bend

Earth work excavating and depositing on bank with bed width and depth and initial lead of 10 meters sand silt or other loose soil, wet sand or silt not under water, light Black cotton soil, sandy loam and ordinary soil including excavated as per SS20B on linear Measurement basis.

250mm DI Pipe

180 mm HDPE PN6

110 mm HDPE PN6

Lowering of D.I Pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD Officers.

250mm DI Pipe

Lowering HDPE pipes and special into gthe trenches carefully laying to proper grade and alignments jointing with Butt joint and testing to the required pressure including conveyance of water for filling during testing excluding cost of materials

180 mm HDPE PN6

110 mm HDPE PN6

Jointing of HDPE pipes and special with Butt welding joint including cost of jointing materials, testing to the required pressure with water, labour charge etc., complete as per standard specification.

180 mm HDPE PN6

110 mm HDPE PN6

Refilling with excavated soil (Other than sand ) complained with standard specification for filling in trenches on linear Measurement basis.

250mm DI Pipe

180 mm HDPE PN6

110 mm HDPE PN6

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Brick work in CM 1:5 (one cement & five sand) using Country bricks of size 83/4"x41/4"x23/4"including finishing, curing, etc., complete complying with standard specification

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plastering with cement mortar (1:4) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Suppling and fixing of is position of SFRC Manhole cover of size 600 x 600mm approved quality the rate include the cost and conveyance of materials and labour charges etc.,Complete.

Supply, Delivery and fixing of CI Sluice Valve set ( the rate includes cost of CI valve, CI Flanges spigot, Socket tail pieces, necessary RI sheet, bolt and Nut and Labour charges for fixing etc., Complete

110 mm CI SluiceValve

150 mm CI SluiceValve

200 mm CI Sluice Valve

250 mm CI Sluice Valve

smthomaiyar and son