A.R. and M.O. to Buildings in West Campus Maintenance Area at IIT Delhi

Amount

Carriage of Materials

By Mechanical Transport including loading,unloading and stacking

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - Item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more.

CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Dismantling and Demolishing

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Non Schedule Items

Cleaning of swimming pool including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. Entire surface area of the swimming pool shall then scrubbed thoroughly with wire brush etc. and pressure washed with water then Wash with Hydrochloric acid 2 to 3 times as required as per direction of Engineer-in-Charge.

Providing and fixing 1st quality unrectified (V2) full body vitrified floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours for swimming pool deck area of any size as approved by Engineer-in-Charge in floor, skirting, risers of steps and dados over 12 mm thick bed of tile adhesive and Grouting the joints of flooring tiles having joints of 6 mm width, using epoxy grout complete. (Make- Pavit - Antiskid R-10 ) (Model- Earthen E102WP & Plane E-181W).

a) (size - 100 mm X 100 mm X 12 mm)

Grouting the joints of flooring tiles having joints of 4 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (For size ( 100 mm X 100 mm X 12 mm)

M/s S.K.Industries (BID ID -3201502)

MODERN CONCEPT CONSTRUCTIONS (BID ID -3201426)

ashika enterprises (BID ID -3201600)

UDYAMIN ENTERPRISES (BID ID -3201605)

R B Super Electricals (BID ID -3199769)