Repair Replacement and Maint of EM items and accessories and repair maint of DG Set, Fire Fighting system and other allied works at Mil Stn Beas under GE Kapurthala

Amount

Taking down old unsv carefully point wiring on casing caping/through conduit (light fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel terminal boxes including providing new 3 mm thick plastic laminated sheet cover (Hylem) including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth dolly complete all as specified and as directed by Engr-in-Charge for one light point controlled by one, one way switch.

All as per Srl item No 2 but one fan point controlled by one, one way switch.

All as per Srl item No 2 but one socket outlet 3 Pin, 6 Amp on independent board

All as per Srl item No 2 but one socket outlet 3 Pin, 6 Amp on same board.

All as per Srl item No 2 but one bell point controlled by one bell push

All as per Srl item No 2 but one light point controlled by two 2 -way switches, with cables 1.5 Sqmm size.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel terminal boxes including providing new 3 mm thick plastic laminated sheet cover (Hylem) including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 8 but one socket outlet 3 Pin, 16 Amp on on same board, complete all as specified and as directed by Engr-in-Charge.

S&F Switch piano type, polycarbonate one way 6 Amp, complete all as specified and as directed by Engr-in-Charge.

S&F Switch piano type, polycarbonate two way 6 Amp, complete all as specified and as directed by Engr-in-Charge.

S&F switch, 6 pin ,16 amps, flush type, polycarbonate, multipurpose, with indicator, 230 / 250 volt, complete all as specified and as directed by Engr-in-Charge.

S&F Switch bell push 6 Amps, flush button type, polycarbonate, SP, one way, 230 Volts, complete all as specified and as directed by Engr-in-Charge.

S&F socket out let multipurpose 5 pin 6 Amps, flush type, polycarbonate, 230 / 240 Volts including taking down unserviceable, complete all as specified and as directed by Engr-in-Charge.

S&F socket out let multipurpose 5 pin 16 Amps, flush type, polycarbonate, 230 / 240 Volts including taking down unserviceable, complete all as specified and as directed by Engr-in-Charge.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc, complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including MS modular terminal boxes, covered with modular plates and cover, concealed/fixed surface to walls etc including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth dolly complete all as specified and directed for one light point controlled by one, one way switch complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 17 but one fan point controlled by one, one way switch.

All as per Srl item No 17 but one socket outlet 3 Pin, 6 Amp on independent board.

All as per Srl item No 17 but one socket outlet 3 Pin, 6 Amp on same board.

All as per Srl item No 17 but one bell point controlled by one bell push.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including MS modular terminal boxes,covered with modular plates and cover, concealed/fixed surface to walls etc, including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 22 but one socket outlet 3 Pin, 16 Amp on on same board.

S&F modular switch 1 way 6 amp.1 module, complete all as specified and as directed by Engr-in-Charge.

S&F modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed by Engr-in-Charge.

S&F modular switch 1 way 16 amp.1 module, complete all as specified and as directed by Engr-in-Charge.

S&F modular Socket, 16A - 2/3 pin combined 2 module, complete all as specified and as directed by Engr-in-Charge.

S&F modular bell push 6 Amps, flush button type, polycarbonate, SP, one way, 230 Volts, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing modular type, electronic fan regulator 230 volts, step type socket type, hum free 100/300 watt, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete, including taking down UNSV exhaust fan of any size and deposit to MES store yard, complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable holder and supply and fix Angular holder insulated body with back plate suitable for batten fittings complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of factory made powder coated distribution board SP & N,230V, 2 way, mounting for MCB's including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of factory made powder coated distribution board SP & N, 230 V, 8 way,mounting for MCB's including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of factory made powder coated distribution board SP & N ,230V,12 way,mounting for MCB's including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement factory made powder coated distribution board TP&N, 440V, 4 way double door including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement factory made powder coated distribution board TP&N, 440V, 6 way double door including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement Auto Change Over Switches , 63 Amps, 4 Pole, 415 Volt, AC , 50 Hz. with suitable size of clamps, nuts, bolts and washers, including cable connection with suitable size of lugs and taking down old item, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement Auto Change Over Switches , 63 Amps, 2 Pole, 415 Volt, AC , 50 Hz. with suitable size of clamps, nuts, bolts and washers, including cable connection with suitable size of lugs and taking down old item complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of factory made powder coated Vertical DBs TPN ,440 V, 4 Way, in double door suitable for flush mounting and surface mounting with 250 A copper busbar for each phase with 2 neutral bar,2 earthbar and cable ties for cable management and fully insulated busber and shrouded neutral bars with provision of 160 A TP/FP MCCB as Incomer (W/O MCCBs) including taking down UNSV DBs acomplete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning including taking down old burnt/ unserviceable MCBs, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 40 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 63 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 415V, 10KA 'C' curve miniature circuit breaker (MCB) TP 63 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 415V, 10KA 'C' curve miniature circuit breaker (MCB) TPN 32 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 415V, 10KA 'C' curve miniature circuit breaker (MCB) TPN 63 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs, complete all as specified and as directed by Engr-in-Charge.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) including taking down old unserviceable, complete all as specified and as directed by Engr-in-Charge.

M&L for bell multi music typeDing Dong, AC 230 Volts, single pole (ISI Marked) including taking downof unserviceable, complete all as specified and as directed by Engr-in-Charge.

M&L for repairing the existing LED tube light fitting 18/20 watt of any make or type by providing suitable driver, LED tube rod etc and checking connection etc complete all as specified and as directed by Engr-in-Charge.

Taking down old unsv laminated sheet and S&F laminated sheet 8" x 4" , including fix the old switch, socket, regulator retrive from old sheet to new laminated sheet, including M&L for screws, nuts bolts etc complete fix on wall, complete all as specified and as directed by Engr-in-Charge.

Taking down old unsv Bulk head light/ Bldg security light and ,Supply & fixing LED bldg security light fitting 20 watt Powder coated pressure die cast aluminium compact LED security light including 1.5 mtr long 40 mm bore GI pipe mounting bracket made to shape for fixing on wall with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers, complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable electric energy meter , Supply and fix single phase electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH, complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable electric energy meter , Supply and fix three phase electronic meters temper proof LCD display with polycarbonate cover 440 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH, complete all as specified and as directed by Engr-in-Charge.

Preparing old painted steel surface of Meter Boxes of any size, including hinges all exposed outer surfaces of steel items fixed with the box, without dismantling and M&L for painting with one coat of synthetic enamel paint on exposed steel outer surfaces and writing Qtr Nos complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 4.00 Sq mm 1100 volts grade including and 2.50 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and as directed by Engr-in-Charge. Note:- Two run of 4.0 Sqmm cable and one run of 2.50 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 6.00 Sq mm 1100 volts grade including and 4 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and as directed by Engr-in-Charge. Note:- Two run of 6 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 10 Sq mm 1100 volts grade including and 6 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and as directed by Engr-in-Charge. Note:- Two run of 10 Sqmm cable and one run of 6 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down old unserviceable sub main wiring and M&L for submain wiring with 4 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 6 Sq mm 1100 volts grade and 6 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and as directed by Engr-in-Charge. Note:- Four run of 6 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down old unserviceable sub main wiring and M&L for submain wiring with 4 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 10 Sq mm 1100 volts grade and one 10 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size, complete all as specified and as directed by Engr-in-Charge. Note:- Four run of 10 Sqmm cable and one run of 6 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down old unserviceable FTL fitting 36/40Watt and, S & F surface mounting energy saving LED tube light fitting, 1x20W, 230V , high efficiency PMMA diffuser gives soft glare free light with LED tube rod 20 W (White) complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable FTL fitting 36/40Watt and, S & F surface mounting energy efficent LED light fitting, 2 feet , 1x20W, 230V , compact batten with extruded aluminium chanel, complete all as specified and as directed by Engr-in-Charge.

S&F LED Recessed full open 2 x 2 Tile 36 Watt,glare free uniform illumination having white powder coated extruded aluminium body suitable for armstrong and grid ceiling Product code LCTLRN-36-FO-CDL (Polaris I) of Crompton or equivalent, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing LED Recessed mounted round fixture 18 Watt, with opal diffuser and separate electrinic driver , glare free uniform illumination, slim, compact, auminum die cast edge lit panel suitable for ceiling complete all as specified and as directed by Engr-in-Charge. Product code LHEBADP51Z1W018(OCTANE) of Havells or equivalent in Bajaj/crompton/Polycab/philips

Supply and fixing LED wall mounting lights fixture brushed nickel finish fixture with opal glass diffuser suitable with 9 W LED lamp B22 base complete. Product code LHFOSAJE1TZ11060(FLROETINE WL 1LS B22 SS) of Havells or equivalent in Bajaj/crompton/Polycab/philips

S&F LED wall mounting lights fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base complete all as specified and as directed by Engr-in-Charge. Product code LHDL03160099 0(CIty 3 ) of Havells or equivalent in Bajaj/crompton/Polycab/philips

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for ltaking out old cable/laying of under ground cable/foundation of poles/stays including segregation of old serviceable bricks complete all as specified and as directed by Engr-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer complete all as specified and as directed by Engr-in-Charge.

Removal of surplus soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed by Engr-in-Charge.

M&L for brick protection using old size sub class 'B' bricks, laid flat dry but adjoining to each other laid lengh wise perpendicular to the axis of cable complete all as specified and as directed by Engr-in-Charge.

Supplying, filling in trenches spreading, leveling sand cushioning 8 cm below and 15 cm above the cable for under ground cable complete all as specified and as directed by Engr-in-Charge.

Supply and layng in replacement GI pipe light grade 50 mm bore for cable porotection fixed to poles/along wall/floor/under road/preparation of GI bracket etc across the drain or nallah with clamps. Bolts, nuts & washers etc ccomplete all as specified and as directed by Engr-in-Charge including taking down the old unsv (clamps. Bolts, nuts & washers shall be measured and paid seperatly)

All as per item No 71 above but of 80 mm dia

S&F 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or round of 10 sqmm cable, complete all as specified and as directed by Engr-in-Charge.

Supply laying, commissioning and testing XLPE insulated armoured heavy duty, electric cable with aluminium stranded conductor for working 1100 Voltage grade size 2 core, 16sqmm including taking out existing unserviceable cable complete all as specified and as directed by Engr-in-Charge. (Earth work, sand cushioning and brick protection shall be measured and paid for separetaly).

All as per item No 74 above here in before but 4 core 25 sq mm

All as per item No 74 above here in before but 3.5 core 35 sq mm

All as per item No 74 above here in before but 3.5 core 70 sq mm

All as per item No 74 above here in before but 3.5 core 95 sq mm

All as per item No 74above here in before but 3.5 core 120 sq mm

Periodical maintenance OF Gen Set such as replacement of Oil, fuel & Air filter including cleaning of filter housing etc of Make : Kirloskar/ Cummins diesel engine generating set including replacement of rusted and defective nuts, bolts and washers etc as required at site for 62.5 KVA DG set, complete all as specified and as directed by Engr-in-Charge. Note:- Spares of Filters required for maintenance of DG Set shall be measured and paid separately .

All as per item No. 80 here in before but 137.5 KVA DG set

Supply only lubrication oil filter element with 'O' ring of Make MICO / Kirloskar / Ruston as required at site for 62.5 KVA capacities of DG Sets, complete all as specified and as directed by Engr-in-Charge.

All as per item No.82 here in before but 137.5 KVA DG set

Supply only fuel filter element with 'O' ring of Make MICO / Kirloskar / Ruston as required at site for 62.5 KVA capacities of DG Sets, complete all as specified and as directed by Engr-in-Charge.

All as per item No. 84 here in before but 137.5 KVA DG set

Supply only Air filter element inner and outer as required at site with 'O' ring of Make MICO / Kirloskar / Ruston as required at site for 62.5 KVA capacities of DG Sets, complete all as specified and as directed by Engr-in-Charge.

All as per item No. 86 here in before but 137.5 KVA DG set

M&L for lub oil SAE 15 W - 40 (Make : Castrol/Power Supreme) - for Top up and filling up the oil in the sump after completely flushing the old oil out of the tank and cleaning of the tank for fresh filling, complete all as specified and as directed by Engr-in-Charge.

M&L for distilled water to be filled in batteries, complete all as specified and as directed by Engr-in-Charge.

Disconnecting the existing battery of capacity 12V 90 to 150 AH from the DG set, taking it to battery workshop, draining out the complete unserviceable electrolyte acid from the battery, filling up with new Electrolyte acid to the required level, charging the battery, testing the battery for correct specific gravity, bringing back to the location, connecting to DG set, start the engine for satisfactory function, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of Battery 12 V 150 AH and initial charging complete including required electrolite /distilled water etc and fixing as required at site to the concerned DG Set, complete all as specified and as directed by Engr-in-Charge.

All as per item No 91 above but of 12V 180 AH, complete all as specified and as directed by Engr-in-Charge.

Supply and replacement of indicator lamp RYB as specified /bush button/element all as per sample, complete all as specified and as directed by Engr-in-Charge.

Supply and replacement of Push button for Start/Stop switch all as per sample, complete all as specified and as directed by Engr-in-Charge.

S&F power contactors 40A, 1 No-1 NC, complete all as specified and as directed by Engr-in-Charge.

S&F power contactors 80A, 1 No-1 NC, complete all as specified and as directed by Engr-in-Charge.

S&F single phase preventer 240V, complete all as specified and as directed by Engr-in-Charge.

S&F Thermal over load Relay for power contactor 30 A to 50 A, complete all as specified and as directed by Engr-in-Charge.

S&F Thermal over load Relay for power contactor 80 A to 100 A, complete all as specified and as directed by Engr-in-Charge.

Supply and replacement of radiator hose of any capacity, complete all as specified and as directed by Engr-in-Charge.

Supply and replacement of electronic Oil pressure sensor complete with wiring, connectors, bottle thimble complete all as specified and as directed by Engr-in-Charge.

Supply and replacement of electronic Fuel Level sensor complete with wiring, connectors, bottle thimble complete all as specified and as directed by Engr-in-Charge.

S&F in replacement battery cable assembly (-ve & +ve) complete all as specified and as directed by Engr-in-Charge.

M&L for removing old paint from the surface of Open Body Gen Set of alternater capacity upto 137 KVA with sand paper and painting complete DG set & control panel board with synthetic enamel paint (of colour as directed by Engineer-in-Charge) using spray gun with compressed air and writing Ser No/ MES No in block letters with white paint and size of letter n.exc 30 cm height complete all as specified and as directed by Engr-in-Charge.

Supply and replacement of electronic water temp gauge sensor double pin in bypass complete with wiring, connectors, bottle thimble complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of brass terminal suitable for 12 Volts, 90/120/180 AH battery complete all as specified and as directed by Engr-in-Charge.

Supply and repalcement of fuel hose set nylon type of any capacity, complete all as specified and as directed by Engr-in-Charge.

S&F glass sheet size 60 cms x 60 cm x 4 mm thick in MS box including provinding new rubber beading complete all as specified and as directed by Engr-in-Charge.

S&F rubber gasket for fire hydrant coupling of any size complete all as specified and as directed by Engr-in-Charge.

S&F Male & Female brass coupling for fire hydrant post of any size complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of hose pipe rubberised fiber 70 mm dia ISI marked each length 30 Mtr with gun metal male and female coupling duly winding with wire suitable for fire hydrant 65 mm bore including taking out old unserviceable hose pipe complete all as specified and as directed by Engr-in-Charge.

Taking out old unserviceable hose pipe fire box , supply and fixing sheet metal fire box panel 16 gauge of size 80 x 60 x 30 cms thick welded to MS angle iron frame of size 40 x 40 x 6 mm and legs (02 Nos ) welded to angle iron frame at one end of other to be embedded in cement concrete by drilling/ grouting & cutting on existing platform and making the surface goodncluding providing 'L' type hook for supporting hose pipe including transparent fibre glass size 60 cms x 60 cm x 4 mm thick in MS box with rubber beading in openable door of panel (one side openable with hinges on other size) and painting with two coats of synthetic enameled RED paint over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Charge.

M&L for painting of Sheet Metal Hose pipe fire box panel with two coats of synthetic enamelled Red Paint after cleaning/brushing the existing surface in 2 ASD Depot area complete all as specified and as directed by Engr-in-Charge.

S&F in replacement fire hydrant stand post/Stand post 80 mm dia GI/MS both flaged type 1.5 mtr height in 2 ASD Depot area and taking out old unserviceable stand complete all as specified and as directed by Engr-in-Charge.

M&L for painting the fire hydrant stand post/Stand post 80 mm dia GI/MS both 1.5 mtr height after cleaning the existing surface with super enamelled BLACK/ RED paint as per site requirement in 2 ASD Depot area complete all as specified and as directed by Engr-in-Charge.

Repair to existing valve pits of internal dimensions 90x 90 x 90 Cms making good disturbed/dismantled brick work in cement mortar (1:4) and PCC coping in cement concrete 1:2:4 type B-1 and providing MS cover in replacement made out of MS sheet 3 mm thick duly welded to MS angle iron frame 40x 40 x 6 mm including frame work as per existing size with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

All as per item No 116 here in before but of size 75 x 75 x 75 cms

Taking down existing old unsv LT panel and supply, fabricating, installation, commissioning, testing and electrically connected CPRI approved manufacturer LT panel out door cubical type, Double door, made of 3.15 mm thick CRCA sheet steel on angle iron frame 50mm x 50mm x 6 mm of size 1.5m x1.5 m x.0.50 m with removable hinged doors on both side, locking arrangement, vermin proof, painted with 2 coats of synthetic enamel paint over a coat of red oxide (internal& external surface) with heat shrinkable sleeves on Copper bus bar 600 Amp capacity - 04 Nos for distribution, complete wiring with thimbles and other accessories using crimping tool including foundation for fixing over PCC (1:2:4) type B-1 using 20mm graded stone aggregate foundation complete all as specified and directed by Engr in Charge comprising the following :- Incoming:- (i) MCCB 4 pole, 415 volts Adjustable type, 400 Amps, 36KA, 50 C/S with spreader link - 01 Nos. Outgoing:- (i) MCCB 4 pole, 415 volts Adjustable type, 250 Amps, 36KA, 50 C/S with spreader link - 02 Nos. (ii) MCCB 4 pole, 415 volts Adjustable type, 200 Amps, 36KA, 50 C/S with spreader link - 03 Nos. (iii) MCCB 4 pole, 415 volts Adjustable type,100 Amps, 36KA, 50 C/S with spreader link - 02 Nos. (iv) Indicating lamps, LED type, 230VAC - 3Nos. (v) Digital Voltmeter, 3Phase -01 Nos. (vi) Digital Ammeter 3Phase, 0-500A - 1 Nos. (vii) CT coils - 3 Nos.

Taking down existing old unsv LT panel and supply, fabricating, installation, commissioning, testing and electrically connected CPRI approved manufacturer LT panel out door cubical type, Double door, made of 3.15 mm thick CRCA sheet steel on angle iron frame 50mm x 50mm x 6 mm of size 1.5m x1.5 m x.0.50 m with removable hinged doors on both side, locking arrangement, vermin proof, painted with 2 coats of synthetic enamel paint over a coat of red oxide (internal& external surface) with heat shrinkable sleeves on Copper bus bar 600 Amp capacity - 04 Nos for distribution, complete wiring with thimbles and other accessories using crimping tool including foundation for fixing over PCC (1:2:4) type B-1 using 20mm graded stone aggregate foundation complete all as specified and directed by Engr in Charge comprising the following :- Incoming:- (i) MCCB 4 pole, 415 volts Adjustable type,400 Amps, 36KA, 50 C/S with spreader link - 01 Nos. Outgoing:- (i) MCCB 4 pole, 415 volts Adjustable type, 200 Amps, 36KA, 50 C/S with spreader link - 02 Nos. (ii) MCCB 4 pole, 415 volts Adjustable type,100 Amps, 36KA, 50 C/S with spreader link - 06 Nos (iii) Indicating lamps, LED type, 230VAC - 3Nos. (iv) Digital Voltmeter, 3 Phase - 01 Nos. (v) Digital Ammeter 3 Phase ,0-500 A - 1 Nos. (vi) CT coils - 3 Nos.

S&F in replacement of MCCB, 4 pole, 415 volt of cpacity. Adjustable type 400 Amp, short circuit breaking capacity 35/36 KA, thermal setting 70-100% confirming to IS, including thimbles, nuts, bolts, washers etc disconnecting from LT panel and making incoming, out going connections complete all as specified and as directed by Engr-in-Charge. (Cost of copper thimbles, nut & bolts shall be included in the quoted rate)

All as per item No 120 above but capacity 250 Amps and breaking capacity 35/36 KA

Supply and fixing in replacement of MCCB, 4 pole, 415 volt of cpacity 200 Amp, short circuit breaking capacity 35/36 KA, thermal magnatic protection type confirming to IS, including thimbles, nuts, bolts, washers etc disconnecting from LT panel and making incoming, out going connections complete all as specified and as directed by Engr-in-Charge. (Cost of copper thimbles, nut & bolts shall be included in the quoted rate)

All as per item No 122 above but capacity 160 Amps and breaking capacity 35/36 KA

ASHWANI SETHI

TARA ENTERPRISES