CA No GE(H)-29/2021-22 REPAIR TO FOOTPATH, FENCING, BOUNDARY WALL, DRAIN AND ATTENDING EMERGENT DAY TO DAY COMPLAINT OF SEWER NATURE AND ALLIED WORKS OF MD ACCN DSTV IN AOR OF AGE BR I UNDER GE HISAR AT HISAR MIL STN

Amount

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as directed.

Dismantling RCC posts or struts any section embedded in concrete, brick work, masonry etc. including taking out embedded portion and making good disturbed ground.

Dismantling fencing wire mesh of any type or any description fixed to any type of fencing posts.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.

Dismantling galvanized steel barbed wire of any description fixed to any type of fencing posts. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil all as specified.

Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in soft/loose soil all as specified.

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil all as specified.

Forming embankments including raising (or lowering) earth, spreading in layers not exc. 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc., not exc. 1.5m high from base all as specified and as directed.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level n. exc 1.50 metre above the starting point complete all as specified.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed.

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete.

M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges all as specified.

M&L for PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in cill, coping steps, seismic and other similar courses, lacing courses, parapet and railing upto 60cm ht, kneelers, kerb and like including weathering slightly rounded or chamfered angl and throating including necessary formwork, complete all as specified and directed.

M&L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 150 sq. cm and not exc 400 sq cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed. Note :- The rate quoted shall deemed to inclusive of necessary formwork for casting post / structs etc.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified.

M&L for brick work using old size fly ash bricks as specified in clasue 6 of Particular specification, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified.

M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

S&F mild steel framed work in tubular trusses using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. complete all as specified & as directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

S&F decorative type cast iron knobs (fancy) for iron grill and other similar works all as specified & directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

All as per serial item No 27.00 here-in-before but except barbed wire. Note : (i) Old serviceable barbed wire retrieved from serial item No. 8.00 here-in-before shall be used under this item. (ii) Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

M&L mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Gde E-165 (Fe 290) all as specified and directed.

Supply only mild steel galvanized chain link fencing any size or type as directed complete all as specified. Note:- Flat iron, round bars, nut bolts and washer shall be measured and paid for separately.

Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire. Note :- Supply only chain link fencing shall be measured and paid for separately.

Supply only mild steel round bars as in line wire fixed to chain link fencing and other similar works, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long, dia of neck not exc 12mm complete all as specified & as directed.

M&L for 75mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.

M&L for 300mm x 300mm x 12-15mm thick heavy duty factory made coloured paver tiles (Delta IVORY / Delta TERRACOTA "Matt finished) as in floor, set and jointed in neat cement slurry and pointed in white cement or coloured cement to match with tiles, laid over & including 15mm thick screed bed in cement & sand mortar 1:4, complete all as specified & as directed.

M&L for 300mm x 600mm x 7mm (or more) thick premium glossy coloured ceramic polished tile, set and jointed in neat cement slurry and laid with 3mm spacer and pointed with two component exposy grout to match coloured tiles, laid over & including 10mm thick screed bed in cement & sand mortar 1:4, complete all as specified & as directed. Note :- Contractor should get material as per latest catalogue of approved make.

M&L factory made 40mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-30 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as Specified & directed.

M&L factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as Specified & directed.

All as per serial item No 39.00 here-in-above but except tiles. Note : Old serviceable tiles retrieved from serial item No. 4.00 here-in-before shall be used under this item.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerb block (factory casted) with plain fair faces, including weathering, slightly rounded or chamfered angle throating, with plain or interlocking joints and setting in cement mortar 1:4, complete, all as directed.

M & L for rendering 15mm thick in cement mortar 1:3 on faces of brick work or concrete surfaces of walls, finished even and fair including mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement including mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement complete all as specified and directed.

M & L for preparing old brick, stone, asbestos cement or plastered surfaces, concrete surfaces (Kerb Stone Painting) of any description over 10cm width or girth and applying one coats of synthetic enamel paint of any tint etc complete all as specified and as directed.

M&L preparation of new or previously untreated plastered/ concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint of approved tint over a coat of priming paint all as specified & as directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide primer complete all as specified.

M&L for attending complaints pertaining to essential cleaning of RCC sewage line upto 200mm dia through day to day maintenance by rodding / auger rods / drain pipe machine as required from manhole to manhole including gully trap with and including dewatering of contiminated waste effluent & getting out the sludge if required by using suitable method during cleaning process from any size of manhole & gully trap before & after cleaning process of RCC sewage line and well flushing using clean water through water bowser pipe of any capacity (water bowser shall be arranged by the contractor) and removing the sludge etc to a distance not exc 250m and burying the same underground by digging pit of suitable size from habitant area and returning & filling with excavated material upto ground level including removal of sludge soil to a distance not exc 250m with and including taking off manholes / gully trap covers and refixing the same after cleaning process complete all as specified and directed. Note :- The measurement of EACH JOB will be covered the length between one to another manhole inclding cleaning of manholes. The rate quoted against the item shall deemed to be included all M&L and T&P required.

M&L for attending complaints pertaining to essential opening / cleaning of blocked WC of any type, traps and CI / PVC drain pipe including fittings (i.e. access door bends/ Tees etc) of any size and at any position through day to day maintenance with and including taking down CI / CP / PVC grating and refixing the same at position with suitable material / fitting i.e. white cement, solvent, nut & bolts etc and well flushing, pressure pumping, taking out all residue materials etc and removing the same to a distance not exc 250m and burried the same underground by digging pit of suitable size from habitant area and covering the same by returning & filling with excavated material upto ground level including removal of surplus soil to a distance not exc 250m complete all as specified and directed. Note :- The rate quoted against the item shall deemed to be included all M&L and T&P required.

M&L for cleaning / taking off of sludge of any state (solid / semi soild & other similar materials etc) through day to day maintenance from manhole of any size including gully trap having depth not exc 4m by using machinary or manually as required and removing the same to a distance not exc 250m and burried the same underground by digging pit of suitable size from habitant area and returning & filling with excavated earth upto ground level including removal of surplus soil to a distance not exc 250m complete including taking off manholes / gully trap covers & re-fixing the same after cleaning process complete all as specified and directed. Note :- The rate quoted against the item shall deemed to be included all M&L and T&P required.

S&F in repair factory made precasted reinforced cement concrete ferrow (SFRC) manhole cover of size 630mm dia, heavy duty HD-20 grade conforming to IS - 12592 complete all as specified and directed.

S&F in repair factory made precasted reinforced cement concrete ferrow (SFRC) manhole cover of size 700mm x 550mm, heavy duty HD-20 grade conforming to IS - 12592 complete all as specified and directed.

S&F in repair factory made precasted reinforced cement concrete ferrow (SFRC) manhole cover of size 350mm x 350mm, heavy duty HD-20 grade conforming to IS - 12592 complete all as specified and directed.

Taking up or down 20 mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed .

S&F 20 mm bore steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as required complete and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. (measured overall as fixed along the centre line over fitting and accessories) complete all as specified.

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

Taking down and refixing cast iron pipe 75mm bore fixed to walls with necessary fittings / connection & MS clamps / clip and necessary screwing as required in new or old position complete all as specified and directed. Note :- The rate quoted shall deemed to be inclusive of necessary new fitting/connections & MS clamp / clip / screwing.

Taking down and refixing cast iron pipe 100mm bore fixed to walls with necessary fittings / connection & MS clamps / clip and necessary screwing as required in new or old position complete all as specified and directed. Note :- The rate quoted shall deemed to be inclusive of necessary new fitting/connections & MS clamp / clip / screwing.

Shiva Constructin Co.

m/s Rajesh Kumar