CECHZ PAT 15 2022 23 PROVISION OF KLP ACCN PHASE II AT PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works) Lump sum price worked out by the contractor for " BUILDING WORKS" as listed in schedule 'A' Part-I

Schedule 'A'Section-II(SITE CLEARANCE & SITE DEVELOPMENT AND EARTHWORK WORKS)

Total amount of Sch 'A' Sec II (Site clearance & Site Development and Earth Works) Lump sum price worked out by the contractor for " SITE CLEARANCE & SITE DEVELOPMENT AND EARTHWORK WORKS" as listed in schedule 'A' Part-II

Schedule 'A'Section-III (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec III (Internal Electrification Works) Lump sum price worked out by the contractor for " INTERNAL ELECTRIFICATION WORKS" as listed in schedule 'A' Part-III

Schedule 'A'Section-IV (INTERNAL WATER SUPPLY , WORKS)

Total amount of Sch 'A' Sec IV (Internal Water Supply, Works) Lump sum price worked out by the contractor for " INTERNAL WATER SUPPLY , WORKS" as listed in schedule 'A' Part-IV

Schedule 'A'Section-V (SEWAGE DISPOSAL WORKS)

Total amount of Sch 'A' Sec V (Sewage Disposal Works)Lump sum price worked out by the contractor for " SEWAGE DISPOSAL WORKS" as listed in schedule 'A' Part-V

Schedule 'A'Section-VI (AREA DRAINAGE WORKS)

Total amount of Sch 'A' Sec VI (Area Drainage Works) Lump sum price worked out by the contractor for " AREA DRAINAGE WORKS" as listed in schedule 'A' Part-VI

Schedule 'A'Section-VII (SECURITY FENCING WALL AND GATE WORKS)

Total amount of Sch 'A' Sec VII (Security Fencing Wall and Gate works)Lump sum price worked out by the contractor for " SECURITY FENCING WALL AND GATE WORKS" as listed in schedule 'A' Part-VII

Schedule 'A'Section-VIII (ROAD PATH & CULVERTS WORKS)

Total amount of Sch 'A' Sec VIII (Road Path Culverts & PCC hardstanding Works)Lump sum price worked out by the contractor for " ROAD PATH & CULVERTS WORKS" as listed in schedule 'A' Part-VIII

Schedule 'A'Section-IX (EXTERNALWATER SUPPLY WORKS)

Total amount of Sch 'A' Sec IX (External water supply Works) Lump sum price worked out by the contractor for " EXTERNALWATER SUPPLY WORKS" as listed in schedule 'A' Part-IX

Schedule 'A'Section-X (LIGHTENING PROTECTION WORKS)

Total amount of Sch 'A' Sec X (Lightening Protection Works) Lump sum price worked out by the contractor for " LIGHTENING PROTECTION WORKS" as listed in schedule 'A' Part-X

Schedule 'A'Section-XI (EXTERNAL ELECTRIC SUPPLY WORKS)

Total amount of Sch 'A' Sec XI (External Electric Supply Works) Lump sum price worked out by the contractor for " EXTERNAL ELECTRIC SUPPLY WORKS" as listed in schedule 'A' Part-XI

Schedule 'A'Section-XII (SOLAR POWER HEATING SYSTEM WORKS)

Total amount of Sch 'A' Sec XII (Solar Power Heating System Works) Lump sum price worked out by the contractor for " SOLAR POWER HEATING SYSTEM WORKS" as listed in schedule 'A' Part-XII

Schedule 'A'Section-XIII (RAIN WATER HARVESTING WORKS)

Total amount of Sch 'A' Sec XIII (Rain Water Harvesting Works) Lump sum price worked out by the contractor for " RAIN WATER HARVESTING WORKS" as listed in schedule 'A' Part-XIII

Schedule 'A'Section-XIV (ARBORICULTURE WORKS)

Total amount of Sch 'A' Sec XIV (Arboriculture works) Lump sum price worked out by the contractor for " ARBORICULTURE WORKS" as listed in schedule 'A' Part-XIV

Schedule 'A'Section-XV (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

BUILDING WORKS

Item No 1 : S&F road sign board made out with two nos posts using 80 mm dia MS tubes light grade,2.4 mtr high with ACP sheet 1200mm x1200mm x 5mm thick laminated with radium paper including writing/sign with radium tape/roll both sides of board duly fixed with MS flat of size 40x5mm including all neccessary drilling,bolting or riveting,excation of post hole and grouted in PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete,all as specified and directed.

SITE CLEARANCE & SITE DEVELOPMENT AND EARTHWORK WORKS

Item No 2 : Earth for filling for low lying area brought out of defence land including spreading and levelling complete all as specified and as directed.

INTERNAL ELECTRIC SUPPLY WORKS

(a) One light/fan/bell point controlled by one , one way switch

(b) One 3 pin ,6 Amps socket outlet on independent board

(c) One 3 pin 6 Amps socket outlet on same board

Item No. 5 : M & L for Concealed Sub main Wiring with two run of 6.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for main DB to Sub DB and for AC. Note:-For payment purpose 3 runs of 6 Sqmm cable and one run of conduit will be measured as one unit .

Item No. 6 : M & L for Concealed Sub main Wiring with two run of 4.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for main DB to Sub DB and for AC. Note:-For payment purpose 3 runs of 4 Sqmm cable and one run of conduit will be measured as one unit .

Item No. 7 : M& L For MCB DB TPN 6 ways double door 415 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete with IP-54 all as specified and directed all as specified & directed .

Item No. 8 : M& L for MCB DB TPN 4 ways double door 415 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete with IP-54, all as specified and directed.

Item No. 9 : S&F of Sheet metal enclosure MCB SPN distribution board, double door, IP 54 class, including suiable size copper bus-bar,240V, 16 Way with shrouded neutral bar, earth bar and including cable ties and suitable size blanks complete, all as specified and directed.

Item No. 10 : S&F of Sheet metal enclosure MCB SPN distribution board, double door, IP 54 class, including suiable size copper bus-bar,240V, 12 Way with shrouded neutral bar, earth bar and including cable ties and suitable size blanks complete, all as specified and directed.

Item No. 11 : S&F for flush fixing of Sheet metal enclosure MCB SPN distribution board, double door, IP 54 class, including suiable size copper bus-bar,240V, 8 Way with shrouded neutral bar, earth bar and inclluding cable ties and suitable size blanks complete all as specified and directed.

Item No. 12 : S&F of Sheet metal enclosure MCB SPN distribution board, double door, IP 54 class, including suiable size copper bus-bar,240V, 4 Way with shrouded neutral bar, earth bar and inclluding cable ties and suitable size blanks complete, all as specified and directed.

Item No. 13 : MCB, single pole, 6 to 32 Amp, 230 Volts, having breaking capacity 10 KA, 'B' curve, complete, all as specified and as directed.

Item No. 14 : MCB, single pole and neutral, 40 Amp, 230 Volts, having breaking capacity 10 KA 'B' curve, complete, all as specified and as directed.

Item No. 15 : MCB, single pole and neutral, 32 Amp, 230 Volts, having breaking capacity 10 KA 'B' curve, complete, all as specified and as directed.

Item No. 16 : MCB, single pole and neutral, 25 Amp, 230 Volts, having breaking capacity 10 KA 'B' curve, complete, all as specified and as directed.

Item No. 17 : MCB, single pole and neutral, 20 Amp, 230 Volts, having breaking capacity 10 KA 'B' curve, complete, all as specified and as directed.

Item No. 18 : MCB, single pole and neutral, 16 Amp, 230 Volts, having breaking capacity 10 KA 'B' curve, complete, all as specified and as directed.

Item No. 19 : MCB, single pole and neutral, 6 Amp, 230 Volts, having breaking capacity 10 KA 'B' curve, complete, all as specified and as directed.

Item No. 20 : MCB, triple pole and neutral, 40 Amp, 415 Volts, having breaking capacity 10 KA 'C' curve, complete, all as specified and as directed.

Item No. 21 : MCB, triple pole and neutral, 63 Amp, 415 Volts, having breaking capacity 10 KA 'C' curve, complete, all as specified and as directed.

Item No. 22 : S & F Energy saving LED tube light fitting, 1 x 20 watt, 230 volts, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable complete all as specified and as directed.

Item No. 23 :S & F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed.

Item No. 24 : S & F Energy saving LED light fitting, 40 watt, 230 volts, suspended lED batten CRCA housing for efficent heat dissipation with built in electronic driven diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable complete all as specified and directed.

Item No. 25 : S & F energy saving Receess / surface mounting 2' x 2' luminaires light fitting 40 W, complete with driver suitable for ceiling surface complete, all as specified and directed.

Item No. 26 : Surface mounted wall Mirror LED light Compact & sturdy 9 watt LED decorative fixture with anti glare polycarbonate diffuser, multi purpose lighting solution & applications .all accessories & fixtures, internally prewired and connecting by providing copper flexible wire 23/.0076 mm twin core upto fitting, complete in all respects, all as specified and directed.

Item No. 27 : M& L for LED bulb 10 watt 230 volts AC 50 Hz Retrofit B22 base with lamp holder complete, all as specified and directed.

Item No. 28 : M&L for Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor(BLDC) complete in white colour with canopy and hanging rod with all accessories including nuts,bolts,clamps etc, complete all as specified and directed

Item No. 29 :M& L for Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete in white colour with canopy and hanging rod with all accessories incl nuts,bolts,clamps etc, complete all as specified and directed

Item No. 30 : Exhaust fan 300 mm sweep metal body, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900 rpm complete with louvers for wall mounting incl grouting,making hole in the wall and holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan including cutting of hole of required size for fixing of the exhaust fan complete, all as specified and directed

Item No. 31 : Exhaust fan 380 mm sweep metal body, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900 rpm complete with louvers for wall mounting incl grouting,making hole in the wall and holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan including cutting of hole of required size for fixing of the exhaust fan complete, all as specified and directed

Item No. 32 : S & F Energy saving LED porch light fitting, 1 x 36 watt, 230 volts, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable complete all as specified and directed

Item No. 33: S & F Energy saving surfacel mounting LED light fitting, 11 watt, 230 volts, with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD < 10% complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable complete, all as specified and directed

Item No. 34 :Supply & fix single shade decorative wall mounted fixture made up of polycarbonate suitable with 9 W LED lamp B 22 base complete all as specified and directed.

Item No. 35 :Supply and fix decorative wall mounting bed light antique brass finish fixture with opal glass diffuser suitable for 7 W LED lamp E 22 base complete all as specified and directed.

Item No. 36 : Supply and fix Swing Type Wall Mounted fan 600 mm sweep 1440 RPM AC heavy duty single phase 230/ 240 V electrical connection complete, all as specified and directed.

Item No. 37 : Earthing with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised steel earth lead wire 4.00mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or steel with protection pipe of GI, light grade 40mm bore, watering pipe 20 mm bore of GI medium grade, earth plate surrounded by alternate layer of coal dust and common salt 15 cm thick each layer all as per electrical plate No 3 of SSR Part-I and connected to earthing test point all as specified or indicated and testing on completion including funnel with wire mesh, earthing chamber with PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 80 mm thick precast earth pit cover made of RCC (1:1.5:3) type A-1 duly reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways and frame,one lifting handle made of 8 mm dia TMT bar embedded in cover slab including all excavation and earth work etc. complete all as specified and as directed. Note : 1. Earth chamber shall be constructed at least 1.50 metre away from the top of earth electrode, the earth pit and pipe for watering shall be provided in slanting manner. 2. Cost of 7.5m length of GI strip & GI protection pipe included in the rate of this item. Extra length shall be measured and paid separately.

INTERNAL WATER SUPPLY WORK

Item No 38 :S&F single lever wall mixer with provision of hand shower,fancy type ,cast copper Alloy ,chromium plated ,screwed down high pressure with long screwed shank and flynut,screwed for 15 mm bore iron pipe complete all as specified and directed. .

SEWAGE DISPOSAL WORK

Item No 39: M&L for DWC (Double Wall Corrugated) HDPE pipes of size 150mm (ID dia) confirming to IS-16098 Part-II of Strength/Stiffness class SN 4 laid in tranches on concrete bed to level/gradient, including jointing as per manufacturer's instructions incl jointing accessories as required complete all as specified and directed.

Item No 40: M&L for DWC (Double Wall Corrugated) HDPE pipes of size 200mm (ID dia) confirming to IS-16098 Part-II of Strength/Stiffness class SN 4 laid in tranches on concrete bed to level/gradient, including jointing as per manufacturer's instructions incl jointing accessories as required complete all as specified and directed.

SECURITY FENCING WALL AND GATE WORK

Item No 41 :Steel Gate with wicket gate 5.50 m wide complete , Excavation in ordinary soft/ loose soil, Cement concrete 1:5:10 type E-2 as in foundation, RCC M-25 (Design Mix) as in column footings, padestal and columns/ pillars incl all necessary form work, reinforcement, Cement concrete coping 1:2:4 type B-1, Granite (Table rubbed and polished) 20mm thick over 10mm cement screed in CM 1:4, all MS work as in ornamental/ intricate designed steel gate incl pintle hinges and painting etc complete all as specified and as shown on drgs.

ROAD PATH CULVERT AND HARD STANDING WORK

Item No 42 :Providing, Laying, compaction of granular sub-base by providing close graded material conforming to specification i.e grading II, conforming to clause 401 of MORTH specifications for Road and Bridge works (Fifth Revision) , mixing in mechanical mix plant at OMC, carriage of mix material by tippers to work site, for all leads and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller of capacity 8 to 12 Ton to achieve the desired density , 150 mm thick ( Compacted thickness), complete all as specified and directed .

Item No 43 :Providing, Laying, compaction of wet mix macadam conforming to clause 406 of MORTH specifications for Road and Bridge work (Fifth Revision), 250 mm thick (compacted thickness, 125 mm thick in two separate layers) with mechanically crushed grade aggregates and granular materials (size range 53 mm to 75mm ), grading of aggregate as per table 400-13 of MORTH specifications for Road and Bridge works (Fifth Revision), including pre-mixing the material with water at OMC in for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub- base/ base course on wellprepared surface and compacting with vibratory power roller of capacity 8 to 12 Ton toachieve the desired density, required gradient and camber etc, complete all as specified and directed Note :- (i) The WMM shall be laid in two layers i.e each of 125 mm thick ( compacted thickness) (ii) For payment purpose, both layers shall be considered as one Unit.

Item No 44 : Preparation of un-surfaced Wet Mix Macadam (WMM) surfaces by sweeping clean by broom or mechanical sweepers and removing completely all loose and foreign material and finallly fanning the cleaned surface with air compressors to remove all loose dirt etc, and applying evenly a priming cost on unsurfaced wet mix macadam surface conforming to clause 502 of MORTH specifications for Road and Bridge works (Fifth Revision) with cationic bitumen emulsion SS1 grade conforming to IS: 8887 (latest edition) @ 7.50kg/10 Sqm using primer distributor which shall be shelf propelled or towed bitumen pressure sprayer complete all as specified .

Item No 45 : Providing, laying and compaction of bituminous macadam (BM) 50mm compacted thickness specifications for Road and Bridge works(Fifth Revision), using mechanically crushed stone aggregates and granular material, etc. of grading II as per table 500-7 of MORTH specification for Road and Bridge works (Fifth Revision) pre-mixed with bituminous binder, bitumen grade VG-30@ 3.50% (percentage by weight of total mix) prepared in batch type hot mix plant 100-120 TPH capacity transported to site by trippers, laid over a previously prepared surfaace with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specification to achieve the desired compaction and density complete all as specified. Notes:- (i) The Contractor shall quote the rate against item considered 3.50% VG-30 bitumen content. Mix Design for Bituminous Macadam shall be got designed from NIT/CTL/Govt. Engineering College and shall be got approved from GE in writing while before commencement of work without any financial effect to the department. Also, the Bitumen content cannot be less than 3.40% by weight of total mix as per clause 507.24 for MORT & H specification (Fifth Revision). (ii) If quantiy of binder content is less than the quantity as specified in respective items of BOQ , it shall be adjusted at supply only rates of paving bitumen @ Rs 45.00 Per Kg and if quantity of binder content is more than the quantity as specified in respective items of BOQ no adjustment shall be made.

Item No 46 :Preparation of bituminous surface and applying evenly a tack coat conforming to clause 503 of MORTH specifications for Road and Bridge Works (Fifth Revision) with cationic bitumen emulsion RS 1 Grade, conformation to IS :8887(latest edtion) @ 2.50 Kg per 10 Sqm using distructor which shall be self-propelled or towed bitumen pressure sprayer complete allas specified.

Item No 48: M&L for preparing bituminous surfaces of road and marking 2.0mm thick center lines, stop lines,dashes,arrows etc and the like n.exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as specified and directed

EXTERNAL ELECTRIC SUPPLY WORKS

Item No.49 : S & F decorative LED post top fitting powder coated aluminium die cast and and spun with clear diffuser of capacity 25 Watts complete, all as directed and directed.

Item No.50 : Supply and fixing junction box of size 250x200x150 mm, made out of 1.6 mm thick MS sheet , having aluminium bus bar strip 4 nos mounted on insulators and 1 No outgiong MCB 6 Amp SP 240 Volts ,the junction box shall be front openable and lockable hinged shutter with self closing arrangement, rain shed outdoor type, weather and vermin proof, having arrangement of connecting incoming and outgoing cables, complete duly painted with two coats os silver paint over a coat of red oxide primer etc completre all as specified and directed.

Item No. 51 : S&F energy efficent LED street light with lens IP 66 with PDC aluminium body and clear glass LED LENS for wide beam distribution Efficacy>100Lm/W fitting 25 watts complete all as specified and directed

Item No. 52 : S & F brackets for street light lumanaries 40 mm light grade GI pipe with 2 Nos clamps etc length of GI pipe not more than 1.5 metre length (For fixing on PCC/Steel poles) complete, all as specified and as directed.

Item No.53 : Supply and fix LED bollard powder coated PDC aluminium body with opal diffuser IP 54 of capacity 6 Watt complete all as specified and as directed.

Item No.54 :Supply and fix digital time switch DIN type astronomical type programable every 1 min , with backup of 6 years 28 memory location , current capacity 16 A, with 1 changeover (1 CO) in sheet metal enclosure complete all as specified and directed.

Item No. 57 : Earthing complete with galvanisedsteel pipe electrode, 40mm bore,medium grade, 2.5 metres length,buried directly and preferablyvertically in ground with top edgenot less than 1.25 metres belowground level connected with earthing 32x6mm as earthing lug lead all as shown inPlate No. 2 to the earthing test pointall as specified and indicated including testing on completion. Connected to earthing test point testing complete including necessary earth pit chamber PCC 1: 3: 6 type C1, and 50mm thick RCC 1 : 2: 4 chamber cover and with 8mm dia mild steel re-enforcement of 15Cm C/C spacing both ways from the earth plate electrode, excavation, charcoal and common salt mixed refilling of soil etc complete all as directed.

Item No. 58 : Supply and fix new Energy efficient new generation energy saving LED flood light,powder coated PDC aluminium body with toughned glass confirming to IP 66LED Flood light 150 Watt fixture complete with all accessoriesincluding neccessory fixing arragement on high mast pole complete all as specified

EXTERNAL WATER SUPPLY WORKS

Item No.59 : Construction of brick masonry Valve pits of size 900 mm x 900 mm x 900 mm (internal size) for sluice valves with sub Class 'B' bricks straight or curved or plan exc 6 mtr mean radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 2 mm thick with angle iron 40x40x6 mm frame with fixing hinges, locking arrangement hold fastand handle etc duly painted with two coats of synthtic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete all as specified inclding breaking of existing broken/ damaged valve pit the contractor can utilize retrived serviceable bricks complete all as specified and directed by Engineer-in-Charge.

Item No.60 : Construction of brick masonry Valve pits of size 600 mmx600 x600mm (internal size) for sluice valves with sub Class 'B' bricks straight or curved or plan exc 6 mtr mean radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 2 mm thick with angle iron 40x40x6 mm frame with fixing hinges, locking arrangement hold fastand handle etc duly painted with two coats of synthtic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete all as specified inclding breaking of existing broken/ damaged valve pit the contractor can utilize retrived serviceable bricks complete all as specified and directed by Engineer-in-Charge.

Item No. 61 :Taking up cast iron water mains for 80 to 150 mm dia pipe (including all fittings), with spigot and socket ends and lead joints including burning out joints,cutting of cast iron pipes and reducing to required length for insertion of new tees,branches etc. including neccessary run lead joints/ flenged joints and all fittings complete, all as specified and directed.

SUMMER APPLIANCES AND HOT WATER SUPPLY WORKS

Item No. 62 :Supply, Installation, and commissioning of Water cooler,partially stainless steel, electric driven AC single phase, 230 volts, 50 Hz having approx storage capacity of 80 Ltrs and nominal cooling capacity of 40 Ltrs per hour complete, all as specified and directed.

Item No. 63 :Supply, Installation, and commissioning of Water cooler,partially stainless steel, electric driven AC single phase, 230 volts, 50 Hz having approx storage capacity of 120 Ltrs and nominal cooling capacity of 60 Ltrs per hour complete, all as specified and directed.

Item No. 64 :Supply and fix Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with input voltage stabilized at 230V with accuracy of +/- 2.5 % and of capacity 1 KVA complete, all as specified and directed.

Item No. 65 : Supply and fixing desert cooler of size as per window design and opening with outer body made out of PGI (Plain galvanized iron) steel sheet not less than 1.20 mm thickness for fixed part,thickness for PGI sheet for shutter not less than 0.8 mm thick ,front grill made of PGI sheet with minimum weight 2.8 kgs overall and outer size not less than 66 cm x 66 cm x 99 cm(height) electric driven copper wounded fan motor having nominal air flow capacity 4000 Cum per hour and submersible pump(single phase) for required flow of water complete, all as specified and as directed.

Item No. 66 :Supply Installation and testing of Refrigerator electric driven 230 Volts single phase,50 Hz supply (4 Star BEE rating)Energy efficient compressor,working on R-134 or superior environmental friendly refrigerant puf insulated body having normal storage capacity 200 litres, single door type, complete, all as specified and directed.

Item No. 67 :Supply Installation and testing of Refrigerator electric driven 230 Volts single phase,50 Hz supply (4 Star BEE rating)Energy efficient compressor,working on R-134 or superior environmental friendly refrigerant puf insulated body having normal storage capacity 310 litres Double door type complete, all as specified and directed.

Item No. 68 :Supply Installation and commissioning of metal top deep freezer single phase 230 volts,50 Hz not less than 320 litres capacity complete, all as specified and directed.

Item No. 69 :Supply Installation and commissioning of metal top deep freezer single phase 230 volts,50 Hz not less than 210 litres capacity complete, all as specified and directed.

Item No. 70 :Supply Installation and Installation of electric storage water Heater(vertical type geysers) not less than five star rating of capacity 25 litres 230 volts,AC single phase capacity vertical type having stainless steel inner tank,including heavy duty pin type fasteners 4" as per site requirement and making neccessory inlet /oulet water connection complete, all as specified and directed.

RAIN WATER HARVESTING WORKS

Item No. 71 : Drilling of bore of size 150 mm dia by direct rotary mechanical system for through rig machine injection well in any kind of soil strata including hard stone / boulders all as specified and directed. Note : 06 Nos of bore to be done, each of depth upto 50 mtrs. The drilling carried out with Rotary drilling method (Direct/Reverse) to the depth of 50 Metre. The bore hole should be electrically logged for precise delination of aquifers (coarse granular and fine grained sediments) to be taped for recharging purpose. The actual design of recharge well will depend on the results on strata chart and electrical log. The PVC pipe and screen of 150mm dia having 1.5mm slot width may be used against granular zones, as it has more open area for the entrance of water.

Item No. 73: Supply,assembling and lowering and fixing in position HDPE blind casing pipe, heavy duty of size 150mm dia with wall thickness not less than 10 mm conforming to IS-12818 having material grade PE 80 PN 6 socketed including , fitting rivetting, jointing and lowering in bore hole complete all as specified and as directed.

Item No. 74 : All as per item No 73 here in before but slotted pipe having slots of size 1.5 mm width complete all as specified and as directed by the Engi-in-Charge.

Item No. 75 : Supply and fixing PVC /MS bail plug assembly suitable for 150mm nominal bore PVC casing pipe complete all as specified and as directed.

Item No. 76 : Supply and fixing PVC /MS well cap alongwith 1" dia nut ball 150 mm bore suitable for 150 mm dia bore PVC casing pipe complete all as specified and as directed.

Item No. 77 : Supply and fixing Mild steel housing clamps 105 cm long made out of mild steel flat of size 10 cm wide ,1.5 cm thick suitable for casing pipe of 150 mm dia ,in two halves with suitable bolts,nuts and washers, including two coats of black bituminous paint over a coat of red oxide primer complete all as specified and as directed.

Item No. 78 : Supply and fixing of collector pipe for recharge pit, made out of slotted MS pipe medium grade of size 150 mm dia including collector pipe covered with PVC mesh complete all as specified and directed.

Item No. 79 : Development of injection bore well with compressed air with Diesel Engine operated compressor for number of hours till free flow of water in well as injected in bore complete all as specified and as directed .

Item No. 80 : Supply and packing pea gravel of size 2 mm , aggregate free from admixtures ,dust clay and screened properly complete all as specified and as directed.

ARBORICULTURE WORKS

Item No. 81 : Supply and mixing properly manure/cowding with the excavated earth to make mixture of earth and manure to a ratio of 2:1 and surface dressing the area to a true level and required slope for grass plantation or to make plant/flower beds complete all as specified and as directed.

Item No.82: Digging holes 100 cm dia and 100 cm deep in soft/loose soil and refilling the same with mixture of clean earth and manure/cowding in ratio of 2:1 including watering, dressing, levelling etc complete all as specified and as directed.

Item No.83 : Digging holes 60 cm dia and 60 cm deep in soft/loose soil and refilling the same with mixture of clean earth and manure/cowding in ratio of 2:1 including watering, dressing, levelling etc complete all as specified and as directed.

Item No.84 : Plantation of Neem, Mango, Peepal, Bargad, Jamun, Kikkar, Seasam, Guava, Sangwan tree including preparation of Plant bed incl manuring and watering etc type and quantity of ornamental species to be decided at the time of execution in consultation with user complete, all as specified and as directed.

Item No.85 : Plantation of Lemon and Keenu tree including preparation of Plant bed including manuring and watering etc type and quantity of ornamental species to be decided at the time of execution in consultation with user complete all as specified and as directed.

Item No.86 : Supply and mixing/spreading insecticides as and when required, chloropyriphos 20% EC complete all as specified and as directed.

Item No.87 : Flooding ground/lawn etc including necessary arrangement to retain water in the area, if required and removing of vegetable and grass in the area complete all as specified and as directed.

Item No.88 : Flooding Plant beds/flower beds ,plant surroundings etc including necessary arrangement to retain water in the area, if required and removing of vegetable and grass in the area complete all as specified and as directed.

Item No.89 : Supply only rubber/pvc tubes for watering of 25 mm bore complete, all as specified and as directed.

Item No.90 : Supply only brass sprinkles with MS standing arrangement for watering the area complete, all as specified and as directed.

Item No.91 : S&F electric drivers water pump with electric motor of 5 HP capacity complete, all as specified and directed

Item No.92 : S&F Tree guard made out of MS weldmesh of dia 600 cm complete all as specified and directed

AKM CONSTRUCTION AND ENGINEERING LLP

J.D.Builders

City Promoter and Buildwell Pvt. Ltd.

M/s Madan Lal Bansal and Co. Contractors Pvt. Ltd.

Rabina Enterprises Pvt Ltd

Onkar Nath Bhalla And Sons Contractor Pvt. Ltd.

DES RAJ AND SONS BUILDERS PVT LTD

Agarwal Jagdish Construction Company Pvt. Ltd.

VIJAY JINDAL BUILDERS PVT LTD

ENGINEER CONSTRUCTION PVT. LTD.

SOOD ASSOCIATES PVT LTD