Repair Renovation of toilets blocks at Sector 26 Sector 32 and Sector 46 Chandigarh under the charge of SDE MCPH Sub Division No 8 Chandigarh Ch to Revenue Head

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.(DSR 14.82)

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.(DSR15.52)

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge (DSR 14.79)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :With cement mortar 1:4 (1 cement : 4 fine sand) (DSR 14.1.1)

Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead.(DSR 14.13)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75mm deep chase (DSR 12.21.1)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.(DSR 12.22)

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern (DSR 17.5.1)

Providing and fixing of factory made 30mm thick PVC flush door shutters made out of (Rajshree plasticwood pre-laminated both side decorated) 5mm thick rigid PVC foam sheet frame shall be made out of 19x19mm MS sqaure tube of 19 gauage and inside 20mm thick PVC hollow profile filed along tube frame, 5mm rigid PVC foam sheet fixed and pressed mechanically on both side of frame with approved quality of adhensive all the edges of door shutter shall have 5mm thick rigid PVC foamsheet lipping in double layer, item includes powder coated MS buff hignges 100x58x1.19mm fixed with bright finish Cr. Black enamed 40mm 120mm mild sheet crewas as per required to entire specifications of Engineer-in-charge Decorative finish (both side wood granined finish)(NSI)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of thickness 4 mm (DSR 14.5.1)