NIT NO. 7 (M-6) ITEM NO. 1

Procurement of 50 HP sewage submersible pump with 50 meter cable including head 12 meter, flow 600 m3/h working voltage 415 +- 10% 3 phase supply 50hz +- 3 % AC Supply having Duct foot bend, Gaskit Profile, protection of bearing overheating technology with CF8M impeller, SS Shaft, Side Entry cable fitable at site including Red Axtm Technology to reduce AXIAL thrust DEXPEL designed to prevent gift to affect, solid handling 100mm, protection IP 68 Make:- Kishor / Aqua / Mody / BS/ DJB Approved Make

Procurement of Digital Auto Operation Electrical Panel with Protection Submersible Pump Controller from 15 faults unhealthy/conditions including Switch Fuse Unit, Contactor, Current Transformer RYB Phase, MCB, Power Controller Terminals, Double password Protection Unit and Networking Options. Make:- Kishor / Aqua / Mody / BS/ DJB Approved Make

Procurement of Sluice Valve in-side screwed and non rising type to IS 14846 with SS 13% Cr. trim and stem of SS to AISI 410 and duly tested. The valve shall be fitted with Hand Wheel for operation of size 200 mm. 1 Make:- Kirloskar/ IVC/ AV / DJB Approved Make SOR 4.2.

Procurement of SS304 Lifting Chain of size 8mm

Procurement of Chain pulley of 3-5 ton.Make:- Indef / Globe & all DJB Approved Make

Procurement of CI double flanged swing type non return valve as per IS:5312 PN 1.0 CI body door / bronze to rubber ring / SS 410 twin pin of size 200 mm. Make:- Kirloskar / IVC / Dorot / DJB Approved Make SOR4.10.8

Procurement MS Pipe Confirming to IS:3589 Gr.330 of size 200 mm dia heavy dutyMake:- Jindal / Tata

Procurement of flanged of size 12mm Thickness 200mm Dia.

Procurement of heavy duty MS bend of size 200 mm dia.

Procurement of Nut & bolts, washer of mix size.

Procurement of Neoprene rubber insertion sheet 50% SOR 22.6.1

Installation of all E&M Equipment, lowering of sewage submersible pump set in to the sump all piping work fixing of valves and accessories executing minor civil works, making electrical connections with cable as required size I/C loading & Unloading cartage, using all safety measures all tools an tackles including fabrication as per direction of engineer-in-charge

Painting all items like valve, NRV, bends, charging line and other piping specials with synthetic enamel paint after scrubbing of rust using emery paper with 1 coat of primer followed by 2 coats of enamel paint.

Testing and commissioning of all E&M equipment at no load and full load conditions as per standard from full satisfaction of Engineer-in-Charge.

MITTAL TRADING COMPANY