SPL REPAIR TO BLDG NO T-24 (OT), T-18 (ICU AND MED WARD), T-25 (SURG WARD) AND T-12 (MECH LAUNDRY) AT MH BABINA

Amount

Dismantling of Asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any guage, thickness includidng national or similar pattern in roof covering complete all as specified and directed.

S & F Pre- painted galvalume aluminum zink coating AZ-150 GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw complete all as specified and directed.

S & F Pre- painted galvalume aluminum zink coating AZ-150 GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw complete all as specified and directed.

Dismantling timber scantling vertical post unframed/framed trussess, purlins etc work 40 sq. cm and over in section in any position complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and directed.

M&L mild steel work in hand rails, half round or other steel section or core for Wind ties for roof including securing bolts, post and struts cutting tops to shape as directed, drilling holes, notching for wire etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for two coat of synthetic enamel paint over redoxide primer on new steel Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets complete all as specified and directed.

M&L for aluminium anodised snap grid frame work of the following complete all as specified and directed :- (a) Main Tee section 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) (b) Section alongwith wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) (c) Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) (d) Snap grid shall be fixed to G.I Flat 40 x 3mm supporting hangers consisting of 4mm dia G.I rod n.exc 1.20m length with J bolts nuts and washer etc as per manufacture instructions & complete all as specified and directed.

M&L for providing and fixing 10mm thick Gypsum board tiles laminated with white PVC film on face side & metalizeed polyster film on the back side with all four edges sealed with PVC film of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame.

M&L for 4mm thick high pressure steam cured non asbestos fiber cement design board of size 600mm x 600mm as in ceiling complete all as specified and diredted.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and directed.

M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:6 complete (on parapet wall) all as specified and directed.

M&L brick work with half brick fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete (on parapet wall) all as specified and directed.

Demolition of cement concrete (reinforced) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4, type B1 (using 20mm graded agg) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L renderig 10mm thick in cement mortar 1:6 over other than fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (ussing 20mm graded stone agg) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, copings, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any description and in any position not other wise specifically provided for complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25m in soft/lose soil complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc complete all as specified and directed.

Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and directed.

M&L for Virified Ceramic coloured tiles double charged 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.72 sqm but not exc 1.44 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6 etc complete all as specified and directed.

M&L for Virified Ceramic coloured tiles double charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n.exc 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6 etc complete all as specified and directed.

M&L for Virified Ceramic coloured tiles double charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n.exc 0.72 sqm, in vertical ssurfaces such as skirtings/dados or risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick rendering in cement mortar 1:4 etc complete all as specified and directed.

M&L for coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6 etc complete all as specified and directed.

M&L for coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in colour cement to match to floor, over and incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300 x 600 x 7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6, etc complete all as specified and directed.

M&L for machine cut kota stone 18-20 mm thick in riser of step, skirting, dado and pillar laid over cement plaster laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 10mm thick rendering or bedding layer in cementy mortar 1:4, etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor or pavings n.exc 15cm thickness (below or above ground floor) complete all as specified and directed.

M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in flooring, plinth protection /path finished even and smooth without using extra cement complete all as specified and directed.

M & L for complete remoal of existing treatment from wall and appying two coat of oil bound distemper with roller over including prepration of surface complete all as specified and directed.

M&L for complete removal of existing treament and applying two coat of cement base paint over with roller on external surface complete all as specified and directed.

M&L for a coat of JK/Birla wall care putty 1mm thick including preparation of surface complete all as specified and directed.

M & L for complete removal of existing treament on wall and applying two coat of white wash all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and directed.

All as per Ser item No 42 but exc 1.5 Sqm and n exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description nexc 1 sq.m each removal to store complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified.

S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B1 using 20 mm graded stone aggregate complete all as specified and directed. Note :- 10mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F Factory made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed.

S&F 35mm thick factory made plain framed, panelled Shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 12 mm BWP grade BWR Plywood. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and directed.

S&F Stainlesss steel wire cloth, 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with stainless steel wire staples etc complete all as specified and directed.

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and directed.

S&F door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg alumunium (extruded section) body and fixed to iron/ aluminum or wooden section complete all as specified and directed.

S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and directed.

S & F butt hinges medium weight cold rolled, mild steel and fixed 75 mm size etc complete all as specified and directed.

S&F but hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 100 mm size in toilet with PVC doors etc complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and directed.

S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and directed.

S&F mild steel, 300 mm ordinary door spring including roller and roller plate etc complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.

S&F in repair steel windows z section with side hung shutters including box type hinges with steel handle and steel peg stay, glazing bar dovetailed or welded for receiving glass after and including taking out old unserviseable steel window complete all as specified and directed.

All as per item No 62 but without glazing bar complete all as specified and directed.

M&L framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed.

S&F powder coated aluminium window fabricated out of aluminium section 1.60mm thick (double shutter double leaf ) side hung type with stainless steel but hinge, one shutter glazed with and including 5mm thick sheet glass tinted and other shutter with stainless steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapples rubber gasket, stopper, powder coated aluminium grills of aperture size of grill 50mmx 50 mm, (All fitting powder coated) ,aluminium anodised handle 100mm long, aluminium anodised tower bolts 100mm long and peg stay etc complete and size of aluminium frame 125mm x 40mm x 1.55mm and shutter frame size 40mm x30mm x 1.55mm complete all as specified and as directed

S&F powder coated aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83mmx44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 5mm thick plain colour PVC sheet and 5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, powder coated aluminium anodised snap beading, screws, powder coated aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed.

S&F powder coated aluminium frame straight for doors using aluminium section of minimum size 100mmx44mmx2.00mm thick, 31mmx12mmx3.00mm thick & 49.91mmx44.45mmx1.3mm thick fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed.

S&F powder coating Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 4mm thick 3 ply Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws to timber frame work or aluminium saction complete all as specified and directed.

S&F Plain sheet glass 3mm thick ordinary quality and glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed

S&F Figured glass, pin head type Sheet glass 3mm thick, ordinary quality and glazing with oil putty or in square n.exc 0.5 sq. m in each pane complete all as specified and directed.

S&F plain Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty or in square but exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Figured glass, pin head type or frosted Sheet glass 5mm thick, ordinary quality and glazing with oil putty or in square but exc 0.5 sq. m in each pane complete all as specified and directed.

Dismantling/demolition of existing water tanks of steel /PVC/RCC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and directed.

Dismantling/demolition of existing water tanks of steel /PVC/RCC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified and directed.

S&F 500 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and directed.

S&F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and directed.

Taking down 15 mm bore steel tubing and connection including cleaning and removal to store etc complete all as specified and directed.

Taking down 20 mm bore steel tubing and connection including cleaning and or removal to store etc complete all as specified and directed.

S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed.

S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed.

M&L Providing precast RCC Cover Slab, 1:2:4 type B 1 using 20 mm graded stone aggregate as in manhole cover slabs including necessary form work etc. set in CM 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in stair steps, cooking platform, and other similar situations etc complete all as specified and directed.

S&F for Two Station wall mounted standered Surgical Scrab Sink manual operating made of stainless steel Sink of outer size 1525mm x 660 and bowl size1448mm x 445mm with Hot & Cold water operated complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick in kitchen or laboratory with out drainage board with plug washers and waste pipe including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm bowl size 410mm x 330 mm x 160mm. and to be fixed with granite or surface with proper gradient for wash out of water all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick in kitchen or laboratory with drainage board with plug washers and waste pipe including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm. and to be fixed with granite or surface with proper gradient for wash out of water all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and directed.

S&F Hasp & staple safety type aluminium anodized with mild steel hinge pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 30mm width of flap etc complete all as specified and directed.

S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed.

S&F aluminium handles 100mm size cast type, anodised for kitchen cabinet shutters or drawer all as specified and directed.

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete all as specified and directed.

S&F fancy type PVC coated MS conduit curtain rod 32mm dia with fancy knob type ends and brackets complete all as specified and directed.

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mm x 440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and directed.

S&F in repaire Vitreous China wash down water closet pan (pedestal pattern) (EWC), white including connections to drain (or outgoing pipe) and to flushing pipe, with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts anti-syphonage pipe including seat cover white etc. complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and dirceted

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and directed.

S&F brass CP mixer 15mm dia bore mixing hot & cold water pillar tap for wash hand basin screwed down for iron pipe and fixed complete all as specified and directed.

S&F brass CP Sink mixer special for Surgical purpose Elbow Action operated 15mm dia bore mixing hot & cold water tap for wash hand basin screwed down for iron pipe and fixed to complete all as specified and directed.

S&F Pillar Tap 15mm dia borecast copper alloy for wash hand basin fancy type screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore angle stop cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and directed.

S&F in repair 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and directed.

S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete all as specified and directed.

S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union complete all as specified and directed.

S&F in repair Vitreous China bowl type half stall urinal flat back small ( SPECIAL ) of Hindware with grating and union for discharge pipe, push tap (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed .

S&F in Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

Demolition and breaking 150mm dia drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe complete all as specified and directed.

M&L for 150mm bore reinforcement concrete pipes, class NP-3 laid and laid jointed complete with collers complete all as specified and directed.

M&L cement concrete bed to 150mm dia drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and directed.

S&F Cast iron Soil, waste and vent spun pipes , in any length with or without ears, with cement joints laid in trenches or in floors 100mm bore including fixing of necessery clamp and taking down old PVC /CI/Concrete pipe complete all as specified and directed.

S&F Cast iron Soil, waste and vent spun pipes , in any length with or without ears, with cement joints, fixed to wall 75mm bore including fixing of necessery clamp and taking down old PVC /CI/Concrete pipe complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls and taking down old PVC/CI/Concrete pipes complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F Cast iron bends any radious 100mm bore complete all as specified and directed.

S&F Cast iron bends any radious 75mm bore complete all as specified and directed.

S&F Cast iron branch pieces, single( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore of pipe complete all as specified and directed.

S&F Cast iron branch pieces, single( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm bore of pipe complete all as specified and directed.

S&F 75mm bore CI floor trap complete all as specified and directed.

S&F Cast iron cowl 100mm bore complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed.

Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and directed.

M & L for concealed point wiring complete with PVC insulated and unsheathed flame retardant los smoke low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and directed for the following :- Note :- (a) Tenderers are advised to visit the site in sufficient time to familar the site. (b) Necessary care to be taken during execution work to avoid damage of existing oxygen gas pipe line, machine etc otherwise same will be make good by contractor without any claim.

One light point controlled by one switch

one fan point controlled by one switch & regulator.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description all as per item No 130 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed.

S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified and directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified and directed

S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified and directed.

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and directed.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 6.0 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 6.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and directed. Note: New conduit and conduit accossories shall be not measured separately.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 10.0 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 10.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and directed. Note: New conduit and conduit accossories shall be not measured separately.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 16.0 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 10.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and directed. Note: New conduit and conduit accossories shall be not measured separately.

S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as out going no of modules DPX 125+12, INCLUDING 125 Amp MCCB omplete all as specified and directed.

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 8 ways 240 V complete all as specified and directed .

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, complete all as specified and directed with copper lugs

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series,complete all as specified and directed with copper lugs

S&F MCCB 4 pole 415 V , AC breaking capacity 16KA with fixed thermal and fixed magnetic setting of capacity 100 amp, 'C' series, complete all as specified and as directed with copper lugs complete all as specified and directed.

supply and fixing MCCB sheet metal enclosure box with hinged door suitable for housing 63A to 100A MCCB 4 pole with provision for fixing arrangement on surface wall earthing terminal on body hinged door with opening including suitable nuts bolts and washer complete all as specified and directed

S&F MCCB 4 pole 415 V , AC breaking capacity 16KA with fixed thermal and fixed magnetic setting of capacity 125 amp, 'C' series, complete all as specified and directed with copper lugs.

supply and fixing MCCB sheet metal enclosure box with hinged door suitable for housing 100A to 160A MCCB 4 pole with provision for fixing arrangement on surface wall earthing terminal on body hinged door with opening including suitable nuts bolts and washer complete all as specified and directed.

supply and fix off load change over switch with rated voltage of 415V-AC 50Hz of FP type having capacity of 125 amp complete all as specified and directed.

Supply and fixing in repair 20 W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed.

Supply and fix LED 35W street light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminium IP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtr length with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesingle core PVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed.

S & F sheet metal enclosure with two pin socket , chain plug cover with one MCB SP of 20/32 Amp capacity with alignment 10 KA ' B’ series complete all as specified and directed.

S&F in in replacement of 36 W of size 2 Feet X 2 Feet LED 6500K rescessed mounting luminaire glare free suitable for armstrong/ grid ceiling in MS/CRCA housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 X 4 sq. mm complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 X 4 sq. mm complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 50 X 3.5 sq. mm complete all as specified and directed.

Excavation in trenches in any type of soil not exe 1.5 mtrs wide and not exe 1.5 mtr in depth for laying of pipe/cables etc and getting out incl forming bottom surface to the required level/slope etc complete all as specified and directed.

Returning fitting in soft/loose soil, including spreading levelling watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing excavated soils to a distance n.exc. 50 mtrs and depsiting where directed at a level n.exc. 1.5 above the starting point complee all as specified and directed

Supply laying dry clean sand free from sharp materials, unscreened filling in trenches around under ground cables for cushioning complete all as specified and directed.

Supplying and laying precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete all as specified and directed.

M&L pipe galvanised iron, light grade ISI marked, complete with fittings laid inj trenches/ fixed with poles etc as protection to cables complete directed for the size 50 mm dia.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified and directed & testing on completion. Note:- (i) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

All as per Ser item No 165 but using copper plate 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead complete all as specified and directed.

M/s Ravi Traders

M/S Kharya Associates

VIJAY BUILDERS

M/S SHIVA TRADERS