Landscaping Development At Govt. Degree College Shopian.

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer R&B Division Shopian

Name of Work:-Landscaping Development At Govt. Degree College Shopian.

Contract No: 88/9222-31/RnB/SPN/e-tendering/2025-26 Dated:- 27-02-2026 Adv cost:- 251.493 (Base cost= 213.130 +GST= 38.363) Lacs INR Accord No:-GDCS-01 AA of 2025 Dated:-19-06-2025. Technical Sanction:-CE(R&B)SK/TS/311 of 2025-26 Dated:-16-02-2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Discription. Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : 0.000 Cum 0.600 Excess(+) Full Conversion INR

2 Supplying and stacking of good earth including Spreading of sludge, dump manure or/and good earth in required thickness as per directions of Engineer in-charge 0.999 Cum 0.400 Excess(+) Full Conversion INR

3 Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.In rows 5 cm apart in either direction 0.999 Sqm 0.999 Excess(+) Full Conversion INR

4 Providing and laying stone soling duly hand packed in maintaning level and section including all carriages complete 0.999 Cum 0.799 Excess(+) Full Conversion INR

5 Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete 0.999 Cum 0.400 Excess(+) Full Conversion INR

6 Providing and laying in position cement concrete 1:2:4 (1 Cement:2 Corase sand: 4 grade stone aggregate 20 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level and above plinth level upto required height including all carriages complete 0.999 Cum 0.799 Excess(+) Full Conversion INR

7 Providing and laying in position of reinforced cement concrete 1:1.5:3 (1 Cement, 1.5 Corase sand: 3 grade stone aggregate 20mm nominal size crushed including curing but excluding the cost of cantering, shuttering, finishing and reinforcement all work upto plinth level including all carriage complete 0.000 Cum 0.400 Excess(+) Full Conversion INR

8 Centering and shuttering (fresh kit ply) including strutting, propping etc. and removal of form work including applying of shuttering oil: Foundations, footings, bases of columns etc. for mass concrete. 0.000 Sqm 0.599 Excess(+) Full Conversion INR

9 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe 500D or more. Inculding all carriages complete 0.000 Kgs 0.600 Excess(+) Full Conversion INR

10 Precast terrazzo tiles 22mm thick with graded marble chips of size upto 12 mm, laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing polishing and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Dark shade using ordinary cement Including all carriages complete 0.000 Sqm 0.799 Excess(+) Full Conversion INR

11 Providing and fixing in poition Cobble Stone 75x75x75mm incluing cost ann carriages complete 0.999 Sqm 0.200 Excess(+) Full Conversion INR

12 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge 0.999 Sqm 0.799 Excess(+) Full Conversion INR

13 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all with all carriages complete.Welded 0.999 Kgs 0.000 Excess(+) Full Conversion INR

14 Providing and fixing Hi- Rib colour coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick 0.000 Sqm 0.399 Excess(+) Full Conversion INR

15 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers 0.63 mm thick with zinc coating not less than 275 gram/m2 complete. 0.999 Rm 0.200 Excess(+) Full Conversion INR

16 Providing and fixing plained eaves boarding.300x40 mm (nominal size) 2nd class kail wood 0.000 Rm 0.799 Excess(+) Full Conversion INR

17 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length of Imported wood including all carriages complete. 0.000 Cum 0.600 Excess(+) Full Conversion INR

18 Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Pahal Gardan All as per directions of engineer incharge complete 0.000 Sqm 0.600 Excess(+) Full Conversion INR

19 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 0.999 Sqm 0.599 Excess(+) Full Conversion INR

20 French spirit polishing, Two or more coats on new works including a coat of wood filler 0.000 Sqm 0.599 Excess(+) Full Conversion INR

21 Stone tile work for wall lining upto 10m height with special adhesive like araldite or equivalent over 12mm thick bed of cement mortar 1: 3 (1 cement : 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade 0.000 Sqm 0.799 Excess(+) Full Conversion INR

22 Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: 0.000 Sqm 0.199 Excess(+) Full Conversion INR

23 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.( Internal work concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.) PN-16 pipe , 40mm OD(SDR-7.4) 0.000 RM 0.399 Excess(+) Full Conversion INR

24 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 0.000 Kgs 0.800 Excess(+) Full Conversion INR

25 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge including all leads, lifts, loading, unloading carriage of all materials Complete 0.000 Cum 0.600 Excess(+) Full Conversion INR

26 Providing and applying tack coat using hot straight run bitumen of grade -VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. (On WMM/WBM Surface @0.75Kgs/Sqm) including all leads, lifts, loading, unloading carriage of all materials Complete 0.000 Sqm 0.200 Excess(+) Full Conversion INR

27 Providing and laying 50 mm thick bituminous macadam with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum/ Batch Type Hot Mix Plant using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Chargeincluding all leads, lifts, loading, unloading carriage of all materials Complete BI01010001010000000000000515BI0100001113 0.000 Cum 0.400 Excess(+) Full Conversion INR

28 Providing and laying semi- dense Bituminous concrete of 25 mm compacted thickness with bitumen of grade VG 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum /Batch type Hot Mix Plant using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge including all leads, lifts, loading, unloading carriage of all materials Complete 0.000 Sqm 0.599 Excess(+) Full Conversion INR

29 Providing and laying 6mm thick seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road including all leads, lifts, loading, unloading carriage of all materials Complete. 0.000 Sqm 0.000 Excess(+) Full Conversion INR

30 Mechanical (Supply, Installation Testing & Commissioning of 02 No. Fountain at Government Degree College Shopian)(Part B)

31 Design, Supply, installation,Testing and commissioning of 6 ft Dia Circular Ring/Jet Nozzle Header made in GI pipe(B-Class dia 65mm) fitted with not less than 38 No. sockets placed symmetrically at a distance of aprox. 5.5 inch gap all along the circumference of the header line and 04-No 40mm inlet sockets. The Job Includes fixing of all GI fittings, Hinges,Supports, Clamps etc. necessary for completion to the satisfaction of the Engineer in Charge 0.000 Set 0.199 Excess(+) Full Conversion INR

32 Providing and Fixing of centre Frothy Nozzle made of Bronze/Gunmetal/Brass/SS of Reputed Make Suitable for attaining a water jet height of not less than 8.5 ft and GPM not less than 30. 0.000 Nos 0.400 Excess(+) Full Conversion INR

33 Design,Supply,Installation, Testing and Commissioning of Frothy Nozzle made of SS304 of Reputed Make Material: Bronze/Gunmetal/Brass/SS. Suitable for attaining a water jet height of not less than 3.5 ft and GPM not less than 20. 0.000 Nos 0.799 Excess(+) Full Conversion INR

34 Design,Supply,Installation, Testing and Commissioning of straight Jet Nozzles (size as per manufactures design) with inbuilt angle adjustable ball joint,Made in High Quality Brass/ Gunmetal (Chrome Plated) of approved Make or as Per EIC.Suitable for attaining a water jet height of 5ft and GPM not less than 2. 0.000 Nos 0.799 Excess(+) Full Conversion INR

35 Design, Supplying, installation, testing and commissioning of Open well submersible Pump with SS pump shaft/impeller coupled with totally enclosed water filled squirrel cage induction motor having all rotating parts dynamically balanced for silent operation. The pump should be able to deliver a flow not less than 220 gpm while maintaining a display height as required at site. Make : Reputed Operating Voltage: 380V Capacity : Not Less than 5 H.P IP Rating: IP68. 0.000 Job 0.799 Excess(+) Full Conversion INR

36 Supply/Laying/Testing/Commissioning of 3.5 core 25 sq mm Al conductor PVC insulated armoured cable.(to be paid as per actual) 0.000 mtr 0.599 Excess(+) Full Conversion INR

37 Supply/ Laying/Testing/Commission of Cable 3 core 6 sq mm copper conductor flat/submersible type PVC insulated.(to be paid as per actual) 0.000 mtr 0.199 Excess(+) Full Conversion INR

38 Supply laying of 25 sqmm PVC conduit along with necessary accessories and fittings (to be paid as per actual) 0.000 mtr 0.000 Excess(+) Full Conversion INR

39 Plumbing/ Piping Work: Design/Supplying/Fixing/Testing/Commissioning of GI B-Class Pipe Header/Network in pipe sizes 80mm, 50mm, 40mm, of reputed make confirming to ISO 15874 or equivalent including welding, fitting like elbows, tees,flanges,hinges,supports,taper etc All fixing to be done to the entire satisfaction and as approved by Engineer-In-charge. 0.000 Job 0.799 Excess(+) Full Conversion INR

40 Providing and fitting of 40mm Ball valve(Brass, heavy). 0.000 Job 0.200 Excess(+) Full Conversion INR

41 Providing and fitting of 25mm Ball valve(Brass, heavy). 0.000 Job 0.400 Excess(+) Full Conversion INR

42 P/F of Water Strainer made up of SS Mesh with all fittings. 0.000 Nos 0.000 Excess(+) Full Conversion INR

43 SITC of Three Phase Control Panel (4' X 4') including: 100-125 A 4 Pole MCCB 30kA breaking capacity, 125A Aluminium bus bar, 50A 4 pole MCBs (C type) 02 NOS, Voltmeter, Ammeter for all phases on output with selector switch, 2 No. DOL Starters suitable for submersible pump of required capacity with OLR from 10A-16A. The panel shall be fabricated of sheet metal 16 gauge with powder coated out door type with rating IP67. The Outgoing shall have: 1. Two outgoing Feeder for 02 NO 5 Hp Pumps fitted with DOL starters. 2. Auxiliary Feeder (Blank) 0.000 Job 0.000 Excess(+) Full Conversion INR

44 Supply, installation, testing & commissioning of 15 KVA Servo-stabilizer including all allied electrical accessories including transformer oil. The stabilizer should have following specifications: main supply a) Capacity: 15 KVA, 3-phase unbalanced type b) Input: (138.5-280) V AC P-N; (240-485) V AC P-P c) Output: 415 V ± 1% - phase to phase d) Supply: 3 phase, 4 wires, 50Hz e) Operation: Automatic f) Duty cycle: Continuous g) Transformer windings: Copper wound on CRGO laminations as per IS specifications h) Cooling: Oil cooled i) Efficiency: Better than 98% at full load j) Overload capacity: 15% for continuous 4 hours k) Waveform distortions: Nil l) High speed voltage correction: up to 8V to 20V per second m) Protections: Under voltage, Over voltage and Overload with time delay n) Other features: LED indicators, Digital AC ammeter, AC voltmeter, Frequency meters, Phase Sequence meters, Single phase preventer, and Stabilizer by-pass arrangement. The Job also includes P/F of 63 Amp 4 Pole MCCB as incomer to the Servo Stabilizer to be provided in CRC Enclosure. 0.000 Job 0.400 Excess(+) Full Conversion INR

45 Mechanical (Supply, Installation Testing & Commissioning of 01 No. Fountain at Government Degree College Shopian)(Part A)

46 Design, Supply, installation,Testing and commissioning of 6 ft Dia Circular Ring/Jet Nozzle Header made in GI pipe(B-Class dia 65mm) fitted with not less than 38 No. sockets placed symmetrically at a distance of aprox. 5.5 inch gap all along the circumference of the header line and 04-No 40mm inlet sockets. The Job Includes fixing of all GI fittings, Hinges,Supports, Clamps etc. necessary for completion to the satisfaction of the Engineer in Charge 0.000 Job 0.199 Excess(+) Full Conversion INR

47 Providing and Fixing of centre Frothy Nozzle made of Bronze/Gunmetal/Brass/SS of Reputed Make Suitable for attaining a water jet height of not less than 8.5 ft and GPM not less than 30. 0.000 Nos 0.400 Excess(+) Full Conversion INR

48 Design,Supply,Installation, Testing and Commissioning of Frothy Nozzle made of SS304 of Reputed Make Material: Bronze/Gunmetal/Brass/SS. Suitable for attaining a water jet height of not less than 3.5 ft and GPM not less than 20. 0.000 Nos 0.799 Excess(+) Full Conversion INR

49 Design,Supply,Installation, Testing and Commissioning of straight Jet Nozzles (size as per manufactures design) with inbuilt angle adjustable ball joint,Made in High Quality Brass/ Gunmetal (Chrome Plated) of approved Make or as Per EIC.Suitable for attaining a water jet height of 5ft and GPM not less than 2. 0.000 Nos 0.799 Excess(+) Full Conversion INR

50 Design, Supplying, installation, testing and commissioning of Open well submersible Pump with SS pump shaft/impeller coupled with totally enclosed water filled squirrel cage induction motor having all rotating parts dynamically balanced for silent operation. The pump should be able to deliver a flow not less than 220 gpm while maintaining a display height as required at site. Make : Reputed Operating Voltage: 380V Capacity : Not Less than 5 H.P IP Rating: IP68. 0.000 Job 0.799 Excess(+) Full Conversion INR

51 Supply/Laying/Testing/Commissioning of 3.5 core 16 sq mm Al conductor PVC insulated armoured cable (to be paid as per actual) 0.000 mtr 0.600 Excess(+) Full Conversion INR

52 Supply/ Laying/Testing/Commission of Cable 3 core 6 sq mm copper conductor flat/submersible type PVC insulated.(to be paid as per actual) 0.000 mtr 0.199 Excess(+) Full Conversion INR

53 Supply laying of 25 sqmm PVC conduit along with necessary accessories and fittings (to be paid as per actual) 0.000 mtr 0.000 Excess(+) Full Conversion INR

54 Plumbing/ Piping Work: Design/Supplying/Fixing/Testing/Commissioning of GI B-Class Pipe Header/Network in pipe sizes 80mm, 50mm, 40mm, of reputed make confirming to ISO 15874 or equivalent including welding, fitting like elbows, tees,flanges,hinges,supports,taper etc All fixing to be done to the entire satisfaction and as approved by Engineer-In-charge. 0.000 Job 0.799 Excess(+) Full Conversion INR

55 Providing and fitting of 40mm Ball valve(Brass, heavy). 0.000 Nos 0.200 Excess(+) Full Conversion INR

56 Providing and fitting of 25mm Ball valve(Brass, heavy). 0.000 Nos 0.400 Excess(+) Full Conversion INR

57 P/F of Water Strainer made up of SS Mesh with all fittings. 0.000 Nos 0.000 Excess(+) Full Conversion INR

58 SITC of 50 A MCB, 4 pole (01 No.) with suitable enclosure, 100–125 A 4-Pole MCCB with suitable enclosure, and DOL starter complete for operating 5 HP–380 V, 3-phase pump motor including contactors, thermal overload relay, start/stop push button, interconnections and all accessories as per requirement. 0.000 Job 0.800 Excess(+) Full Conversion INR

59 Supply, installation, testing & commissioning of 10 KVA Servo-stabilizer including all allied electrical accessories including transformer oil. The stabilizer should have following specifications: main supply a) Capacity: 10 KVA, 3-phase unbalanced type b) Input: (138.5-280) V AC P-N; (240-485) V AC P-P c) Output: 415 V ± 1% - phase to phase d) Supply: 3 phase, 4 wires, 50Hz e) Operation: Automatic f) Duty cycle: Continuous g) Transformer windings: Copper wound on CRGO laminations as per IS specifications h) Cooling: Oil cooled i) Efficiency: Better than 98% at full load j) Overload capacity: 15% for continuous 4 hours k) Waveform distortions: Nil l) High speed voltage correction: up to 8V to 20V per second m) Protections: Under voltage, Over voltage and Overload with time delay n) Other features: LED indicators, Digital AC ammeter, AC voltmeter, Frequency meters, Phase Sequence meters, Single phase preventer, and Stabilizer by-pass arrangement. The Job also includes P/F of 63 Amp 4 Pole MCCB as incomer to the Servo Stabilizer to be provided in CRC Enclosure. 0.000 Job 0.399 Excess(+) Full Conversion INR

61 Supply and erection of Mild Steel Swaged Tubular Pole conforming to IS: 2713:1980 (Part I-II) with base plate. The pole shall be made from steel tube and pipe (IS: 1141, Fe 410) including excavation of pit and filling up the same with cement concrete of M15 Grade (1:2:4 Mix) from base plate to 50 cm above ground level, earthing terminal, cable entry with 32 mm Dia B class GI cable sleeves. The pole shall be painted with 2 coats of red oxide primer and 2 coats of enamel paint of silver. The job also includes the cost of form work and carriage of all required materials. (8 mtr, ST 410 SP-33). 0.000 Nos 0.199 Excess(+) Full Conversion INR

62 Supply, installation, testing and commissioning of a three-phase outdoor type 10 KVA servo voltage stabilizer complete with weather proof canopy enclosure, complete all inbuilt protections such as over voltage, under voltage, overload protection and time delay relay (TDR). The unit shall be servo-controlled, fully automatic, ONAN cooled, and provided with first filling of fresh filtered transformer oil of required dielectric strength, suitable for operating on AC input voltage range of 156-430 volts (p-p), output voltage range of 240-415 volts (p-p), mandatory test certificate of approved make (Chinar/Cosco/Alba) sample to be approved by EIC), complete job. 0.000 Nos 0.490 Excess(+) Full Conversion INR

63 Supplying and laying of following size DWC HDPE Pipe ISI marked along with accessories like socket, bend, coupler etc conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63mm dia (OD=63mm ID=51mm nominal). 0.000 Mtr 0.999 Excess(+) Full Conversion INR

64 Supply, installation, testing and commissioning of 25 sq.mm, 4-core XLPE insulated, PVC sheathed, steel armoured aluminium LT cable of 1.1 kV grade from Substation to Main Panel, including loading, unloading, handling, transportation, laying, dressing, termination with suitable aluminium compression glands and lugs, and all incidental works complete in all respects. The quantity indicated is approximate and subject to variation based on actual site conditions, routing, and execution requirements. The contractor shall verify site conditions prior to execution. Make: Havells / Polycab / KEI. 0.000 Mtr 0.799 Excess(+) Full Conversion INR

65 Supply, installation, testing and commissioning of 10 sq.mm, 4-core XLPE insulated, PVC sheathed, steel armoured aluminium LT cable of 1.1 kV grade from Main Panel to Connector placed inside pole box, including loading, unloading, handling, transportation, laying, dressing, termination with suitable aluminium compression glands and lugs, and all incidental works complete in all respects. The quantity indicated is approximate and subject to variation based on actual site conditions, routing, and execution requirements. The contractor shall verify site conditions prior to execution. Make: Havells / Polycab / KEI. 0.000 Mtr 0.000 Excess(+) Full Conversion INR

66 Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) for foundation of electrical panel including mixing, placing, compaction, form work and curing complete, as per directions of Engineer-in-Charge. Complete job. 0.000 Cum 0.800 Excess(+) Full Conversion INR

67 Supply, installation, testing and commissioning of 90W LED sensor based street light on existing brackets, minimum efficacy of 110 lumens/Watt, CCT 5700K with SDCM ≤ 5 and CRI ≥ 70, comprising non-corrosive high-pressure die-cast aluminium housing with toughened polycarbonate cover and separate driver compartment, IP66 ingress protection and IK07 impact resistance, power factor ≥ 0.95, fitted with integral isolated SMPS-based constant current LED driver with low THD, open/short-circuit protection, phase-to-phase protection up to 440V AC and surge protection up to 4 kV, having a rated life of 50,000 burning hours (L70) and suitable for dusk-to-dawn operation, complete with all accessories, installation, testing and commissioning, conforming to LM-79 and LM-80 standards with test reports from NABL accredited laboratory, manufacturer having in-house NABL or Ministry of Science & Technology approved laboratory, or approved make (Havells / LT / Philips or as directed by Engineer-in-Charge). The job includes comprehensive replacement warranty of five (05) years including free replacement of defective luminaire, driver or components during the warranty period, complete in all respects as per direction of Engineer-in-Charge. the documents must bear the original signature and official stamp of the OEM. Additionally a pre Pre-dispatch inspection of lights shall be conducted, either in virtual mode or through physical inspection. 0.000 Nos 0.199 Excess(+) Full Conversion INR

68 Providing and fixing two-way arm bracket for mounting of luminaires on the top of pole, fabricated out of 50 mm diameter G.I. pipe 0.5–0.9 metre long, complete with wall clamp, M.S. clamps, nuts, bolts and washers, including fabrication, drilling, welding and fixing on pole, complete in all respects as per direction of Engineer-in-Charge. Sample to be approved before fabrication. 0.000 Nos 0.400 Excess(+) Full Conversion INR

69 Providing and fixing M.S. junction box of approved make and suitable size, fabricated from 16 SWG sheet steel, powder-coated, complete with suitable clamps, fitted with 4-pole 63 Amp bakelite connector and 3–6 Amp MCB of Schneider/Legrand or equivalent make, including all required hardware, accessories and proper fixing arrangements, complete in all respects as per site requirement and directions of Engineer-in-Charge. 0.000 Nos 0.600 Excess(+) Full Conversion INR

70 Providing and fixing service connection and earthing to luminaire from junction box using 3x1.5 sq.mm PVC insulated, multistrand copper conductor wire of approved make, drawn through suitable PVC conduit including all necessary connections, complete in all respects as per direction of Engineer-in-Charge. (Havells/Polycab/SSK or as directed by EIC). 0.000 Mtr 0.399 Excess(+) Full Conversion INR

71 Supply and installation of Spiral Earthing through 10 SWG GI wire after driving in ground up to a depth of 3 m in the ground from the base of the pole. 0.000 Nos 0.799 Excess(+) Full Conversion INR

73 Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 2mm thick M.S. sheet, vermin and dust proof, Outdoor type with suitable size of angle iron legs grouted in the cement concrete, with lockable type hinged doors, duly painted with provision for fixing of incomer MCCB, outgoing DP MCBs, sets of Aluminium Bus Bar of different rating, after taking Derating factor into account, and other allied accessories etc. as required. The panel is to be fabricated from reputed firm duly approved by CPRI as per approved design, size may vary as per site requirement. 0.000 CFT 0.400 Excess(+) Full Conversion INR

74 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. INCOMING:

75 b) 100 amp TPN MCCB 35 KA including spreader links (Adjustable thermal and Adjustable magnetic release) Legrand/Schneider/L&T/ABB make. 0.000 Nos 0.999 Excess(+) Full Conversion INR

76 b) 4 No. of Aluminium Bus Bar of 250 Amp. 0.000 Set 0.399 Excess(+) Full Conversion INR

78 a) 63 amp TPN MCB 0.000 No 0.600 Excess(+) Full Conversion INR

79 b) 5-32 SP MCB 0.000 No 0.600 Excess(+) Full Conversion INR

81 Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 2mm thick M.S. sheet, vermin and dust proof, Outdoor type with suitable size of angle iron legs grouted in the cement concrete, with lockable type hinged doors, duly painted with provision for fixing of incomer MCCB, outgoing DP MCBs, sets of Aluminium Bus Bar of different rating, after taking Derating factor into account, and other allied accessories etc. as required. The panel is to be fabricated from reputed firm duly approved by CPRI as per approved design, size may vary as per site requirement. 0.000 CFT 0.400 Excess(+) Full Conversion INR

82 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. INCOMING: b) 4 No. of Aluminium Bus Bar of 100 Amp. 0.000 set 0.799 Excess(+) Full Conversion INR

85 Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 2mm thick M.S. sheet, vermin and dust proof, Outdoor type with suitable size of angle iron legs grouted in the cement concrete, with lockable type hinged doors, duly painted with provision for fixing of incomer MCCB, outgoing DP MCBs, sets of Aluminium Bus Bar of different rating, after taking Derating factor into account, and other allied accessories etc. as required. The panel is to be fabricated from reputed firm duly approved by CPRI as per approved design, size may vary as per site requirement. 0.000 CFT 0.400 Excess(+) Full Conversion INR

86 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. INCOMING: b) 4 No. of Aluminium Bus Bar of 100 Amp. 0.000 Set 0.799 Excess(+) Full Conversion INR

89 Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 2mm thick M.S. sheet, vermin and dust proof, Outdoor type with suitable size of angle iron legs grouted in the cement concrete, with lockable type hinged doors, duly painted with provision for fixing of incomer MCCB, outgoing DP MCBs, sets of Aluminium Bus Bar of different rating, after taking Derating factor into account, and other allied accessories etc. as required. The panel is to be fabricated from reputed firm duly approved by CPRI as per approved design, size may vary as per site requirement. 0.000 CFT 0.400 Excess(+) Full Conversion INR

90 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. INCOMING: b) 4 No. of Aluminium Bus Bar of 100 Amp. 0.000 Set 0.799 Excess(+) Full Conversion INR

93 Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 2mm thick M.S. sheet, vermin and dust proof, Outdoor type with suitable size of angle iron legs grouted in the cement concrete, with lockable type hinged doors, duly painted with provision for fixing of incomer MCCB, outgoing DP MCBs, sets of Aluminium Bus Bar of different rating, after taking Derating factor into account, and other allied accessories etc. as required. the panel is to be fabricated from reputed firm duly approved by CPRI as per approved design, size may vary as per site requirement. 0.000 CFT 0.400 Excess(+) Full Conversion INR

94 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. INCOMING: b) 4 No. of Aluminium Bus Bar of 100 Amp. 0.000 Set 0.799 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information