SPECIAL REPAIRS TO BLDG NO P-1 (OLD EME LINE) AND PROVN OF MASTIC FLOORING AT 372 COY ASC (SUP) TYPE A UNDER GE SAUGOR

Amount

S&F pre-painted galvalume Aluminum Zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F pre-painted galvalume Aluminum Zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa for closing gable truss suitable for profile pattern sheet fixed with self driving screws including dismantling AC sheets Ridge/ Hip for corrugated, semicorrugated, etc. sheets in roof coverings complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise complete all as specified and directed.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

S&F mild steel work as in roof trusses (Framed), trucess , purlins, crane , raills and fastnings and heavy bracket framing (Beams tee, angle, channels or flat section) including distance peices, cleats etc ( welded/ reviting) confirming to Fe -410-W ((Gde- E 250) 'A' complete all as specified and directed.

S&F structural steel work as in tubular trusses including special shaped washers complete using ERW or induction butt welded tubes confirming to IS- 1161 Gde St - 240 complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels square cut to or notched forming holes with riveted bottled or welded attachment confirming Fe-410W complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal nut length of bolt 22.5 cm not exc 30 cm long dia of shank 16 to 20 mm complete all as specified and directed.

M&L for preperation of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.

M&L for 600mm x 600mm x 9mm thick vinyl face, cinyl covered edges and washable metalized polyster foil backing, weight @5.6 kg/sqm suspended false ceiling comprising of non asbestos fibre cement building board fixed or laid/ inserted to GI frame work withj screws over GI primer channel 0.55 mm thick with two unequal flanges of 20 and 30 and web of 27 mm fixed to surrounding wall using nylon sleeves and screws 450 mm centre to centre/ intermediate channels 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffits at approx 900 mm centre to centre with GI cleat and steel expansion fashners with and including ceiling section ( not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flanges of 26 mm each with lips of 10.50 mm fixed to the intermediate channels with connecting clips across the intermediate channels at 475 mm centre to centre including hanger 4 mm dia GI ( upto 1200 mm length ) adjusting level fixed to roof slab by mens of ceiling cleats made out of GI flat 40x3 mm size 60 mm long as specified and directed including dismantling of any type of ceiling boards thickness incl cover fillets complete all as specified and directed Make - Arm Gyp -FB ceiling ( Armstrong) Model - Steel ( Alpha life) or equivalent make as specified in Appx 'C' of Particular Specifications

Taking down cment or cement lime plaster any descreption on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc and rubbish off the premises complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or comcrete surface in cement mortar 1:4, finished the surface fair and even complete all as specified and directed.

M&L for complete removal of existing walls and preparation old surfaces and applying Birla/ JK wall care wite putty 2 mm thick for leveling the surface including properly making of 'V' shaped cracks and filling of all cracks with crack seal or wall and applying 2 coat interior emulsion paint over a coat of wall primer, including preperation of surface of wall complete all as specified and directed.

M&L for preperatrion of newly plastered wall surface & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed . Make - Asian ACE or equivalent make as specified in Appx 'C' of Particular Specifications

M&L for complete removal of existing treatment on wall and preperation of old surfaces & applying Birla/ JK wall care putty 2 mm thick for leveling the surfaces including making 'V' shaped cracks and filling of all cracks with cracks seal of walls and applying two coat of interior emulsion paints over a coat of wall primer incl preperation of surface of wall complete all as specified and directed

M&L for complete removal of existing treatment on wall and preparation of old surfaces & applying two coats of exterior emulsion weather proof paint over one coat of wall primer including properly making of 'V' shaped cracks and filling of all cracks with crack seal on walls complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall/ concrete surfaces of finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of existing/ old plastered ceiling surfaces and applying two coats of white complete all as specified and directed.

M&L for preparation of existing/ old plastered wall surfaces and applying two coats of white wash complete all as specified and directed.

Dismantling floor hearth or wall wall tilling including cement mortal bedding and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete uninforced in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregates) as sub basees of floor and finished the surfaces even and rough to receive the topping layer complete all as specified and directed.

M&L for 25mm thick PCC 1:2;4, type B0 (using 12.5mm graded stone aggregates) as in floor complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for joint free non - skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Srl item No 25 above but in skirting/ dado laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tilee exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic joint free coloured tiles of size 350mmx250mmx7mm or 450mmx350mmx7mm thick as in vertical surfaces such as skirting, dado, etc laid over & including 10mm thick rendering in CM 1:4 set and jointed in near cement slurry and pointed in white/ coloured cement to match the shade/ colour of tiles complete all as specified and directed.

M&L for machine cut Kota Stone slab of size 550mm x 550mm x 20mm to 22mm thick as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including cutting of grooves for steps laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed

All as per Srl item No 29 above but in skirting/ dado riser of steps including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for mirror polishing on existing marble/ Granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

Taking down chowkats or frames with shutters ( without taking off shutters from frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters ( without taking off shutters from frames) exc 1.5 sqm but not exc 4.00 sqm each complete all as specified and directed.

S&F solid PVC frame ( single rebeted) of size 50x47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid PVC moulded door shutters, 28 mm to 30 mm thick ( stile) with wood free EPS with 2- 4 or 6 raised panel design with 4 mm thick 3 D wood grain Moulded PVC sheet Polyurethane painted on the front face & 4 mm colour PVC sheet on back face complete all as specified and directed.

Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F Anodised aluminium window and ventilators sliding type three track powder coated consisting of frame 91.80mmx45mm shutters 39x18mm with rollers and locking arrangements with 4 mm thick plain glass with rubber gaskit and aluminium bedding, Al handle, aluminium grill with fixing arangement (wt of grill not less than 2.50 kg/Sqm ), Aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed. (Al section thickness 1.50mm)

S&F glazed aluminium doors powder coated of any colour consisting of frame of 63x39mm size with shutters fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size 94.45x44.45mm, bottom rail & lock rail size is 101.80x44.45mm & style of door shutter is 83x44.45 mm glazed with 5 mm thick tinted/coloured glass of approved make with handle 2 NOs in each door, hinges has fitted on frame as rrquired fixed with rubber gasket & aluminium beading on any No of panels with aluminium handle, locking arrangement, floor spring and floor door stopper inlc necessary joining cleats , glazing clips etc complete ( aluminium section thickness 2 mm confirming to IS complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1 :6 including all quoins, arches, pillars etc and removal of rubbish off the premises complete all as specified and directed.

M&L for brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1 :4 including all quoins, arches, pillars etc and removal of rubbish off the premises complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in plinth protection surface finished even and smooth using extra cement providing with construction joints 10x 20 mm filled with bitumen and sand mortar 1:3 complete all as specified and directed.

S&F 25 mm bore curtain rods of stainless steel chromium plated with fancy type dooms with brackets fitted to each end and fixed to wall incl removal of existing curtain rod and making good the disturbed surfaces complete all as sapecified and directed.

M&L for 18mm to 20 mm thick pre polished Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite complete all as sapecified and directed.

M&L for rounding to edges of stone slabs one edge such as in steps , cooking platforms window cill and other similar situations complete all as specified and directed.

S&F in replacement of galvanised steel tubing medium 15mm bore grade (ISI marked) with all fittings (ISI marked) and concealed or fixed complete all as direced

S&F in replacement of galvanised steel tubing medium 20mm bore grade (ISI marked) with all fittings (ISI marked) and concealed or fixed complete all as direced

M&L for cutting chases, pinining in , in brick wall making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc. And cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exceeding 10 cm girth complete all as specified and directed.

S&F in replacement rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) three layer capacity 1000 ltr hoisted and fixed in position three layer wall construction ISI marked complete all as specified and directed.

S&F in replacement rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) three layer capacity 500 ltr hoisted and fixed in position three layer wall construction ISI marked complete all as specified and directed.

S&F 20 mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F in repair 20 mm dia bore gun metal gate blobe gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F vitreous China premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket (excluding flushing cistern & flush pipe) complete all as specified and directed

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including connection to trap & to flushing pipe antisymphonage pipe etc complete including making good to floor complete all as specified and directed.

S&F in replacement PVC low level flushing cistern of 10 ltr capacity including flushing pipe bend complete all as specified and directed.

S&F in repair vitrerous China wash basins of size 550x400mm (flat back or angle back type) including supplied and fixed angle iron brackets , CP pillar tap fency type 01 NO 15 mm bore, CP waste cupling ,32 mm dia PVC waste pipe 32 mm dia and PVC connection 450mm long high pressure complete all as specified and directed

S&F brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed (ISI marked) complete all as specified and directed

S&F Bib taps 15mm dia cast copper alloy (ISI Marked), chromium plated fancy type with cruth or butter fly handle, screwed down and screwd for iron pipe complete all as specified and directed

S&F in repair angular valve, 15mm dia, cast copper alloy fancy type chromium plated screwed down high pressure screwed both ends for iron pipes or for uniors and fixed in pipe complete all as specified and directed

S&F in repair concealled stop valve 15mm dia cast copper alloy chromium plated fancy type with long shank and cup screwed down, high pressure screwed both ends for iron pipe or for union fixed in pipe complete all as specified and directed

S&F in repair brass chromium plated shower rose fancy type with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair soap dish brass chromium plated fixed to wall complete all as specified and directed.

S&F PVC connection pipe 150 mm long with PTMT nut on both ends of size 15 mm bore of pipe complete all as specified and directed.

S&F vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed

S&F in repairs brass chromium plated tubular towel rail 20mm dia D type 60 cm long between flanges fixed with and including chromium plated screws and wooden/ plastic cleats 9min wt 190 grams) complete all as specfied and directe.

S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid fixed to walls with mild steel clamps complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches in floors complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with mild steel clamps complete all as specified and directed.

S&F in repair of 75mm dia PVC (SWR) multi floor trap with hinge type SS grating including jointing with solvent cement complete all as specified and directed

S&F PVC( SWR) bends 110 mm dia complete all as specified and directed

S&F PVC( SWR) bends 75 mm dia all as specified and directed.

S&F PVC( SWR) bends 75 mm dia with accessable door all as specified and directed.

S&F PVC( SWR) 110 mm dia junction single T eqal or un equal with access door complete all as specified and directed.

S&F PVC( SWR) 75 mm dia junction single ( Single T equal or unequal complete all as specified and directed

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed

M&L for 60mm thick machine made coloured precast concrete interlocking paver block, rubbed with gray cement and pigment any shape and size confirming to IS 15658- 2006 of M- 35 graid laid over and including stone dust coushion not less than 40mm thickness as per the direction of of Engr-in Charge complete all as specified and directed.

Surface excavation to Soft/loose soil not exc 30 cm deep and averaging 15 cm deep and getting out including disposal of soil upto 50m distance from the staring point complete all as specified and directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregates) as sub base of floor and finished the surfaces even and rough to receive the topping layer complete all as specified and directed.

M&L for laying 25mm to 30mm thick industrial mastic flooring by authorized applicator as per IS 1195/ 2002 complete all specified and directed.

S&F double layer heavy duty woven Brass wire mesh (16 vertical &16 horizontal per 59 inch) of weight not less than 1.00 Kg/ Sqm fabricated/ fixied/ bolted by brass screws, nuts to Brass tube frame of size 16mmx16mm (weight not less than 1.00 Kg /RM) cutting, forminging making holes, reveting, bolting etc for fixing of brass wire mesh to frame and further to existing wall/ windows girth by using necesary hold fast complete all as specified and directed. Note:-Accepting Officer shall also organize a BOO for ascertaining the weight of Brass wire mesh as brought by the contractor

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed

Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete incl cutting and chasing in stone/brick masonry all as specified and directed:-

One light, fan point controlled by one switch

One 5 Amp independent socket point controlled by one switch

One 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.87 here in before but for power point wiring using with 2.5 sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed.

S&F Modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed

S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed

S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F modular fan step regulator 120W, 2 module complete all as specified and directed

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.96 above but SPN 40 Amps, 240 V

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- Quoted rate shall deemed to be included for cutting and chasing in stone masonary and making good the disturbed surfaces

S&F in replacement double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 125 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed

S&F in replacement MCCB 125 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed

S&F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed

S&F LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

S&F metal clad box enclosure with socket plug top and MCB SP 20 Amps flushed on wall mounting enclosure with 2 pin and earth plug socket complete all as specified and directed

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

M&L for concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

M&L for concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC conduit size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Taking down and refixing connecting of Ceiling fan and exhaust fan after, greasing complete including connecting with copper wire complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM complete all as specified and directed.

Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 35 sqmm 3.5 core complete all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable as the case may be and getting out hard / dense soil complete all as specified and directed

M&L for sand cushioning in trenches for the cable complete all as specified and directed

Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed

Removing excavated surplus material n. exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from starting point complete all as specified and directed

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed

S&F in replacement of GI Pipe light grade 50mm bore ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed

v k builder

M/s arjeet singh ahluwalia

dipangashu barick and associates

m/s mohansingh

M K Construction

PK CONSULTANT