Providing and Fixing Automatic Sliding Door System, Paver Blocks in Porch, Extension of EV shed and other allied works at Administrative Building of WCL HQ, Nagpur.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer -in-charge. All kinds of soil

Supplying and stacking at site. Good earth

Spreading of good earth as per instruction of E/I

Supply of Diamond Grass of good quality as approved and as per instruction of E/I

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm

P/F Heavy duty interlocking concrete block 80 mm thick rubber mould glossy 400 kg / sq.cm i/c 50 mm thick bed of Stone dust, filling the joints etc as per instruction of E/I

P/F Dorma ES 250 Easy Automatic Glass Door Unit, Double leaf including required Hardware, Installation etc all complete as per instruction of E/I

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified 2 mm thick flat