REPAIR MAINT PERIODICAL SERVICES OF AIR CONDITIONERS AND COOLING APPLIANCES UNDER AGE EM I LT OH LINES AND LT DISTRIBUTION SYSTEM INCLUDING REPLACING OF US CABLE SWITCH GEAR AT YPH AND TB II UNDER AGE EM I IN GE C KIRKEE

Amount

M&L for periodical servicing / Repair,maintenance of split type air conditioner 1.5/2.0 ton cap in situ by cleaning of complete outdoor unit and indoor unit, air blower units, air filter, grills with required chemical solution and using forced air blower or vacuum cleaner, complete checking serviceability of electrical circuit of outdoor and indoor unit, electronic circuit, airblower unit, condenser, remote control unit, including replacement of unserviceable spares such as relays, capacitors, wiring kit, screws, nuts, bolts & washers, remote control unit and testing after completion to entire satisfaction of Engr-in-Charge Note: (i) Spares required shall be measured and paid under respective item of this schedule as supply and fix. (ii) Screws, nuts, bolts & washers shall be inclusive of quoted rate and no extra measurement shall be made. Make of AC- Blue Star, LG, Hitachi, Voltas & Samsung

M&L for periodical servicing/ Repair,maintenance of window type air conditioner 1.5/2.0 ton cap in situ by cleaning of complete cooling coil, condenser unit, air blower units, air filter, grills with required chemical solution and using forced air blower or vaccuum cleaner, complete checking serviceability of electrical circuit of unit, airblower unit, condenser, cooling coil, thermostat, copper tubings, including replacement of unserviceable spares such as relays, capacitors, thermostat, wiring kit, screws, nuts, bolts & washers,and testing after completion to entire satisfaction of Engr-in-Charge. Note: (i) Spares required shall be measured and paid under respective item of this schedule as supply and fix. (ii) Screws, nuts, bolts & washers shall be inclusive of quoted rate and no extra measurement shall be made. Make of AC- Blue Star, Voltas, Feeder Lloyed, Shriram Usha & Carrier

Supply and fix following company recommended spares of Split/Window type air conditioner of 1.5 /2.0 Ton cap suitable for AC Make-Blue Star, LG, Hitachi, Voltas & Samsung, Shriram Usha, Feeder Lloyed & Carrier whichever applicable:- Running capacitor 45 to 60 mfd

Starting capacitor 120-150mfd / 150-200 mfd

Starting relay suitable for reciprocating compressor

Thermostat switch for window type AC

Conderser fan blade for window type AC made of plastic/aluminium as required at site.

Conderser fan blade for split type AC made of plastic/aluminium as required at site

Remote control unit as per original make complete with 2 Nos Duracell battery

Air filter suitable for indoor unit of split type AC 1.5 /2.0 tr capacity as per existing make and model.

Air filter suitable for window type AC 1.5 /2.0 tr capacity as per existing make and model.

Flexible PVC drain pipe 15/20mm bore

Supply & fix new hermetically sealed rotary compressor unit suitable for split type AC with required nuts, bolts & washers, connecting necessary copper tubings, replacement of capilary tube and drier filter after dismentling/taking out existing unserviceable/burnt compressor unit from the split type airconditioner 1.5 ton cap in situ and and testing after completion to entire satisfaction of Engr-in-Charge, suitable for AC make-Blue Star, LG, Hitachi, Voltas & Samsung whichever applicable. Note: (i) Compressor unit shall be 1st quality with compitable model and make of compressor shall be as recommended by the manufacturer of AC. (ii) Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply & fix new hermetically sealed rotary compressor unit suitable for split type AC with required nuts, bolts & washers, connecting necessary copper tubings, replacement of capilary tube and drier filter after dismentling/taking out existing unserviceable/burnt compressor unit from the split type airconditioner 2.0 ton cap in situ and and testing after completion to entire satisfaction of Engr-in-Charge and user unit suitable for AC make-Blue Star, LG, Hitachi, Voltas & Samsung whichever applicable. Note: (i) Compressor unit shall be 1st quality with compitable model and make of compressor shall be as recommended by the manufacturer of AC. (ii) Gas charging shall be measured and paid separately under appropriate item of this schedule. (iii) Company test certificate and warantee certificate shall be submitted to dept.

Supply & fix new Hermatically sealed reciprocating compressor unit suitable for Window type AC with required nuts, bolts & washers, connecting necessary copper tubings , replacement of capilary tube and oil filter after dismentling/taking out existing unserviceable/burnt compressor unit from the window type airconditioner 1.5 ton cap in situ and and testing after completion to entire satisfaction of Engr-in-Charge, suitable for AC Make/ model of-Blue Star, Voltas, Feeder Lloyed, Shriram Usha & Carrier whichever applicable. Note: (i) Compressor unit shall be 1st quality with compitable model and make of compressor shall be as recommended by the manufacturer of AC. (ii) Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply & fix new Hermatically sealed reciprocating compressor unit suitable for Window type AC with required nuts, bolts & washers, connecting necessary copper tubings, replacement of capilary tube and oil filter after dismentling/taking out existing unserviceable/burnt compressor unit from the window type airconditioner 2.0 ton cap in situ and testing after completion to entire satisfaction of Engr-in-Charge, suitable for AC Make/ model of-Blue Star, Voltas, Feeder Lloyed, Shriram Usha & Carrier whichever applicable. Note: (i) Compressor unit shall be 1st quality with compitable model and make of compressor shall be as recommended by the manufacturer of AC. (ii) Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply & fix new blower motor with required nuts, bolts & washers, connecting necessary wires, fixing of fan complete after dismentling/taking out existing unserviceable/burnt blower motor unit from the window type airconditioner 1.5/2.0 ton cap in situ suitable for window AC Make/ model of Blue Star, Voltas, Feeder Lloyed, Shriram Usha & Carrier whichever applicable and testing after completion to entire satisfaction of Engr-in-Charge.

Supply & fix new blower motor, 230V, RPM-950-1350 with required nuts, bolts & washers, connecting necessary wires, fixing of fan complete after dismentling/taking out existing unserviceable/burnt blower motor unit from the outdoor unit of split type airconditioner 1.5/2.0 ton cap in situ suitable for Split AC make-Blue Star, LG, Hitachi, Voltas & Samsung whichever applicable and testing after completion to entire satisfaction of Engr-in-Charge.

Supply and fix electronic circuit board (PCB) suitable for 1.5/2.0 ton window type AC as per existing one after dismentling taking out unsv PCB and testing complete suitable for AC make/model of Blue Star, LG, Hitachi, Voltas & Samsung whichever applicable. Note: (i) PCB unit shall be compitable model and make as recommended by the manufacturer of AC.

Supply and fix electronic circuit board (PCB) suitable for 1.5/2.0 ton split AC as per existing one after dismentling taking out unsv PCB and testing complete suitable for AC make/model of Blue Star, LG, Hitachi, Voltas & Samsung whichever applicable. Note: (i) PCB unit shall be compitable model and make as recommended by the manufacturer of AC.

Supply and fix condenser coil unit of window type AC of cap 1.5 ton cap in situ as per existing make and competable model, connecting necessary copper tubings by brazing after dismentling/taking out existing unserviceable condenser unit suitable for AC Make/model of Blue Star, Voltas, Feeder Lloyed, Shriram Usha & Carrier whichever applicable and testing after completion to entire satisfaction of Engr-in-Charge. Note: Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply and fix condenser coil unit of window type AC of cap 2.0 ton cap in situ as per existing make and competable model, connecting necessary copper tubings by brazing after dismentling/taking out existing unserviceable condenser unit suitable for AC Make/model of Blue Star, Voltas, Feeder Lloyed, Shriram Usha & Carrier whichever applicable and testing after completion to entire satisfaction of Engr-in-Charge. Note: Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply and fix cooling coil unit of window type AC of cap 1.5/2.0 ton cap in situ as per existing make and competable model, connecting necessary copper tubings by gas welding, gas charging with R-22 after dismentling/taking out existing unserviceable coling coil unit suitable for AC Make-Blue Star, Voltas, Feeder Lloyed, Shriram Usha & Carrier whichever applicable and testing after completion to entire satisfaction of Engr-in-Charge and user unit. Note: Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply and fix outdoor unit of split type AC of cap 1.5 ton cap in situ as per existing make and compitable model without compressor but including blower motor, fan connecting necessary copper tubings by brazing after dismentling/taking out existing unserviceable outdoor unit and testing after completion to entire satisfaction of Engr-in-Charge. Note: (i) Gas charging shall be measured and paid separately under appropriate item of this schedule. (ii) Compressor unit shall be measured and paid separately under appropriate item of this schedule.

Supply and fix outdoor unit of split type AC of cap 2.0 ton cap in situ as per existing make and compitable model without compressor but including blower motor, fan connecting necessary copper tubings by brazing after dismentling/taking out existing unserviceable outdoor unit and testing after completion to entire satisfaction of Engr-in-Charge. Note: (i) Gas charging shall be measured and paid separately under appropriate item of this schedule. (ii) Compressor unit shall be measured and paid separately under appropriate item of this schedule.

Supply and fix indoor unit of split type AC of cap 1.5 ton cap complete with cooling unit, PCB, Blower unit with motor, swing motor, remote unit in situ as per existing make and compitable model complete, connecting electrically and copper tubings by brazing, after dismentling/taking out existing unserviceable indoor unit suitable for AC make/model of Blue Star, LG, Hitachi, Voltas & Samsung whichever applicable and testing after completion to entire satisfaction of Engr-in-Charge . Note: (i) Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply and fix indoor unit of split type AC of cap 2.0 ton cap complete with cooling unit, PCB, Blower unit with motor, swing motor, remote unit in situ as per existing make and compitable model complete, connecting electrically and copper tubings by brazing, after dismentling/taking out existing unserviceable indoor unit suitable for AC make/model of Blue Star, LG, Hitachi, Voltas & Samsung whichever applicable and testing after completion to entire satisfaction of Engr-in-Charge. Note: (i) Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply and fix louvers swing motor suitable for window type AC of cap 1.5/2.0 ton cap in situ as per existing make and compitable model, necessary electrical connection and conection with louvers, after dismentling/taking out existing unserviceable unit suitable for AC Make-Blue Star, Voltas, Feeder Lloyed, Shriram Usha & Carrier whichever applicable and testing after completion to entire satisfaction of Engr-in-Charge and user unit.

Supply and fix louvers swing motor suitable for indoor unit of split type AC of cap 1.5/2.0 ton cap in situ as per existing make and compitable model, necessary electrical connection after dismentling/taking out existing unserviceable unit suitable for AC make-Blue Star, LG, Hitachi, Voltas & Samsung whichever applicable and testing after completion to entire satisfaction of Engr-in-Charge and user unit.

M&L for servicing/Repair,maintenance of water cooler of cooling capacity 40/60/80/120 LPH any storage capacity in situ by cleaning of complete cooling coil, condenser unit, air blower units, grills, external body surface, internal body surface with required chemical solution and using forced air blower or vaccuum cleaner, cleaning water storage tank, checking serviceability of electrical circuit of unit, airblower unit, condenser, cooling coil, thermostat, copper tubings, operating knobs, push cocks, drain trays, drain pipes, float valves, relays, OL protector including replacement of unserviceable spares such as relays, OL protector, capacitors, thermostat, wiring kit, operating knobs, push cocks, float valves, Screws, nuts, bolts & washers of water cooler make-Bluestar or Voltas or Usha and testing after completion to entire satisfaction of Engr-in-Charge . Note: (i)Spares required shall be measured and paid under respective item of this schedule as supply and fix. (ii) Screws, nuts, bolts & washers,gaskets shall be inclusive of quoted rate and no extra measurement shall be made.

Supply and fix following company recommended spares of water cooler of cap 40/60/80/120 LPH suitable for:-Over load protector (OLP) make- Usha, Voltas, Blue Star whichever applicable.

Starting relay

Thermostat

Starting capacitor 40/60 mfd

Starting capacitor 80-100 mfd

Running capacitor 4 to 25 mfd

Drain Hose pipe 20mm to 30mm dia PVC

CP push cock 15 mm dia

PVC float valve 15mm dia

PVC/aluminium fan blade for condenser blower motor

Supply & fix new company sealed reciprocating compressor unit with required nuts, bolts & washers, connecting necessary copper tubings by brazing, replacement of capilary tube and oil filter after dismentling/taking out existing unserviceable/burnt compressor unit from the water cooler 40LPH/80L (cooling/Storage) capacity in situ and and testing after completion to entire satisfaction of Engr-in-Charge,suitable for WC Make-Usha, Voltas & Blue Star whichever applicable. Note: (i) Compressor unit shall be 1st quality with compitable model and make of compressor shall be as recommended by the manufacturer of WC. (ii) Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply & fix new company sealed reciprocating compressor unit with required nuts, bolts & washers, connecting necessary copper tubings by brazing, replacement of capilary tube and oil filter after dismentling/taking out existing unserviceable/burnt compressor unit from the water cooler 80LPH/120,or 120LPH/150 (cooling/Storage) capacity in situ and and testing after completion to entire satisfaction of Engr-in-Charge,suitable for WC Make-Usha, Voltas & Blue Star whichever applicable. Note: (i) Compressor unit shall be 1st quality with compitable model and make of compressor shall be as recommended by the manufacturer of WC. (ii) Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply and fix condenser coil unit of water cooler 40/80Ltrs or 80/120Ltrs cap as per existing make and competable model, connecting necessary copper tubings by brazing after dismentling/taking out existing unserviceable condenser unit and testing after completion to entire satisfaction of Engr-in-Charge suitable for WC Make-Usha, Voltas or Blue Star whichever applicable. Note: (i) Gas charging shall be measured and paid separately under appropriate item of this schedule. (ii) Make of item shall be as recommended by the manufacturer of WC

Supply and fix condenser coil unit of water cooler 120/150 Ltrs cap as per existing make and competable model, connecting necessary copper tubings by brazing after dismentling/taking out existing unserviceable condenser unit and testing after completion to entire satisfaction of Engr-in-Charge suitable for WC Make-Usha, Voltas or Blue Star whichever applicable. Note: (i) Gas charging shall be measured and paid separately under appropriate item of this schedule. (ii) Make of item shall be as recommended by the manufacturer of WC

Supply & fix new condenser fan motor with required nuts, bolts & washers, connecting necessary wires, fixing of fan complete after dismentling/taking out existing unserviceable/burnt fan motor unit from the water cooler of cooling cap 40/80L to 120/150L in situ and and testing after completion to entire satisfaction of Engr-in-Charge and user unit suitable for WC Make-Usha, Voltas or Blue Star whichever applicable. Note: Make of item shall be as recommended by the manufacturer of WC

Supply and fix drain tray made stain less steel with required nuts, bolts or screws suitable for any cap incl dismentling taking out unserviceable one suitable for WC Make-Usha, Voltas or Blue Star whichever applicable. Note: Make & size of item shall be as recommended by the manufacturer of WC

Supply & Fix Base frame as per sample suitable for 40/80 Ltrs water cooler made out of MS angle iron, flats, cut to required length, making necessary shape, screw holes, fixing with necessry electric welding, painting with one coat of red oxide and two coats of synthetic enamel paint at all side of the steel member.

Supply & Fix Base frame as per sample suitable for 80/120 Ltrs,120/150 ltrs water coolers made out of MS angle iron, flats, cut to required length, making necessary shape, screw holes, fixing with necessry electric welding, painting with one coat of red oxide and two coats of synthetic enamel paint at all side of the steel member.

Supply and fix following company recommended spares as per make of desert cooler as mensioned:-Wiring kit

PVC float valve 15mm dia

Natural grass pad (set of 3)

Blower motor of suitable capacity including necessary electric connection, mounting nuts, bolts & washers

PVC fan blade for blower motor

Water spray pump

PVC flexible pipe 6mm to 10mm

M&L for Repair /maintenance of Refrigerator of any capacity in situ by cleaning of complete external surface, internal surface, trays, racks with required chemical solution removing all dirt, strains complete checking serviceability of electrical circuit of unit, thermostat knob, fans if provided in frost free model, relays, thermostat, trays including replacement of unserviceable spares such as relays, thermostat and testing after completion to entire satisfaction of Engr-in-Charge. make of Refrigerator-Godrej/Whirlpool/Videocon/LG. Note: (i) Spares required shall be measured and paid under respective item of this schedule as supply and fix. (ii) Screws, nuts, bolts & washers shall be inclusive of quoted rate and no extra measurement shall be made.

Supply only following company recommended spares of refrigerator any cap after dismentling taking out unsv one for make of refrigerator - Starting relayGodrej/Whirlpool/Videocon/LG whichever applicable.

Thermostat

Supply & fix new company sealed reciprocating compressor unit for refrigerator make-Godrej/Whirlpool/Videocon/LG whicever applicable of capacity 165 ltr to 310 ltr with required nuts, bolts & washers, connecting necessary copper tubings by gas welding/brazing, gas charging with R-134A after dismentling/taking out existing unserviceable/burnt compressor unit from the refrigerator in wksp and and testing after completion to entire satisfaction of Engr-in-Charge and user unit. Note: (i) Compressor unit shall be 1st quality with compitable model and make of compressor shall be as recommended by the manufacturer of Refrigerator. (ii) Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply & fix new condenser unit for refrigerator make-Godrej/Whirlpool/Videocon/LG whicever applicable of capacity 165 ltr to 310 ltr with required nuts, bolts & washers, connecting necessary copper tubings by gas welding/brazing, gas charging with R-134A after dismentling/taking out existing unserviceable unit from the refrigerator in situ and and testing after completion to entire satisfaction of Engr-in-Charge and user unit. Note: (i) Condenser unit shall be compitable model and make shall be as recommended by the manufacturer of Refrigerator. (ii) Gas charging shall be measured and paid separately under appropriate item of this schedule.

M&L for servicing/maintenance of Deep Freezer of capacity 300L/310L/450L make-Honeydew/Voltas in situ by cleaning of complete external surface, internal surface, trays, racks with required chemical solution removing all dirt, strains complete and checking serviceability of electrical circuit of unit, condenser unit, relays, thermostat, trays including replacement of unserviceable spares such as relays, capacitors, thermostat, trays and testing after completion to entire satisfaction of Engr-in-Charge as well as user unit. Note: (i)Spares required shall be measured and paid under respective item of this schedule as supply and fix. (ii) Screws, nuts, bolts & washers shall be inclusive of quoted rate and no extra measurement shall be made.

Supply and fix following company recommended spares of Deep freezer of cap 300/310/450 Ltr suitable for make- Honeydew or Voltas whichever applicable:-Over load protector

Starting relay

Thermostat

Starting capacitor 40/60 mfd

Starting capacitor 80-100 mfd

Running capacitor 4 to 25 mfd

Sliding trays small as per existing make & model

Sliding trays large as per existing make & model

PVC fan blade for blower motor

Supply & fix new company sealed reciprocating compressor unit with required nuts, bolts & washers, connecting necessary copper tubings bybrazing, replacement of capilary tube and oil filter after dismentling/taking out existing unserviceable/burnt compressor unit from the Deep freezer 300/310/450L capacity and and testing after completion to entire satisfaction of Engr-in-Charge. Make-Honeydew/Voltas whichever applicable. Note: (i) Compressor unit shall be 1st quality with compitable model and make of compressor shall be as recommended by the manufacturer of DF. (ii) Gas charging shall be measured and paid separately under appropriate item of this schedule.

Supply and fix condenser coil unit of Deep freezer 300/310/450 L as per existing make and competable model, connecting necessary copper tubings by gas welding, gas charging with R-22 after dismentling/taking out existing unserviceable condenser unit and testing after completion to entire satisfaction of Engr-in-Charge and user unit suitable for DF Make-Honeydew/Voltas whichever applicable. Note: (i) Gas charging shall be measured and paid separately under appropriate item of this schedule. (ii) Make of item shall be as recommended by the manufacturer of WC

Supply & fix new blower motor with required nuts, bolts & washers, connecting necessary wires, fixing of fan complete after dismentling/taking out existing unserviceable/burnt blower motor unit from the Deep freezer of cap 300/310/450L and and testing after completion to entire satisfaction of Engr-in-Charge and user unit suitable for DF Make-Honewdew/ Voltas whichever applicable. Note: Make of item shall be as recommended by the manufacturer of WC

M&L for refrigerant gas charging for split type AC with R-22 gas after proper cleaning of pipe lines with carbon tetra chloride and flushing out,leak testing by charging Nitrogen, including replacement of liquide line filter, capillary tube, required soldering/brazing to attain proper cooling level to entire satisfaction of Engr-in-Charge for 1.5 Tr/2.0 Tr Split AC Unit.

M&L for refrigerant gas charging for window type AC with R-22 gas after proper cleaning of pipe lines with carbon tetra chloride and flushing out,leak testing by charging Nitrogen including replacement of liquide line filter, capillary tube, required soldering/brazing to attain proper cooling level to entire satisfaction of Engr-in-Charge for 1.5 TR/2.0 TRwindow type AC Unit.

M&L for refrigerant gas charging for water cooler with R-22 gas after proper cleaning of pipe lines with carbon tetra chloride and flushing out by charging Nitrogen, including replacement of liquide line filter, capillary tube, required soldering/brazing to attain proper cooling level to entire satisfaction of Engr-in-Charge for 40/80 to 120/150 L water cooler Unit.

M&L for refrigerant gas charging for Deep freezer with R-22 gas after proper cleaning of pipe lines with carbon tetra chloride and flushing out, leak testing by charging Nitrogen including replacement of liquide line filter, capillary tube, required soldering/brazing to attain proper cooling level to entire satisfaction of Engr-in-Charge for 300/310/450L deep freezer Unit.

M&L for refrigerant gas charging for Refrigerator with R-134A gas after proper cleaning of pipe lines with carbon tetra chloride and flushing out,leakage testing by charging Nitrogen including replacement of liquide line filter, capillary tube, required soldering/brazing to attain proper cooling level to entire satisfaction of Engr-in-Charge for 165 L to 310 L Refrigerator Unit.

Painting of water cooler body by two coats of paint Externally of any capacity by spray painting after preparation of surface with existing colour.

Painting of outdoor unit of split A/C externally by two coat of paint of any capacity by spray painting after preparation of surface with existing colour.

Numbering of cooling appliances( window/split A/c's,w/coolers,Deep freezers, Fridge etc in situ up to 10 met installed Height with the help of ladder etc ) with white colour in black back ground up to 10 cm width and height all as directed by the Engr-In-Charge.

M&L for dismentling unsv voltage stabiliser for repair including replacement of relays, electronic voltage sensor, circuit and meter, micro switch, indicating light, RC filter, and other connected items for making functional and rewinding of transformer unit with suitable size of super enamelled coper wire, heating, vernishing and testing after repair complete for capacity 1 KVA to 2 KVA.

M&L for dismentling unsv voltage stabiliser for repair including replacement of relays, electronic voltage sensor, circuit and meter, micro switch, indicating light, RC filter, and other connected items for making functional and rewinding of transformer unit with suitable size of super enamelled coper wire, heating, vernishing and testing after repair complete for capacity 3 KVA to 5 KVA.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft loose soil.

All as per item No. 1 above but depth exceeding 1.5 m and not exceeding 3 m complete all as specified

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and directed

M&L for crushed/river sand for cousioning of UG cable/ at cable trenches inside substation bulding.

M&L for brick protection with sub class 'B' brick for UG cable.

Dismantling taking out carefully old/unserviceable UG cable any type any size from trenches/poles/ducts/LT panels after dismentling ends from OH conductors/MCCBs/joint boxes for relaying/refixing or carrying to store for Sch of Credit.

Materisl and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm 2 core with required aluminium cable lugs, heat shrink joints, Colour code heat shrink sleeves at both cable ends all as specified and directed. Note: (i) Heat shrink joint 2 core/4 core will be measured and paid under appropriate item of this Schedule. (ii) Serviceable GI tubing obtained from item No-9 here-in-before for cable protection will be refixed/relaid, No extra measurement/payment will be made. (iii) GI tubing required new will be measured and paid separately under respective item of this schedule. (iv) Heat shrink sleeve of 25mm long on HS joint for colour indication will deemed to be included on the quoted rate, (v) Addl aluminium cable lugs require for jointing cable termination will deemed to be included in the quoted rate and no extra measurement/payment will be made.

All as per item No. 61 here-in-before but 10sqmm 2 core complete all as specified

All as per item No. 61 here-in-before but 16sqmm 2 core complete all as specified

All as per item No. 61 here-in-before but 10sqmm 4 core complete all as specified

All as per item No. 61 here-in-before but 16sqmm 4 core complete all as specified

All as per item No. 61 here-in-before but 25sqmm 3,5 core complete all as specified

All as per item No. 61 here-in-before but 50sqmm 3.5 core complete all as specified

All as per item No. 61here-in-before but 70sqmm 3.5 core complete all as specified

All as per item No. 61 here-in-before but 95sqmm 3.5 core complete all as specified

All as per item No. 61 here-in-before but 120sqmm 3.5 core complete all as specified

Dismentling taking out broken/worn out steel pole of 8.5 to 9.0 mtr long and kepping aside for refixing or carrying to store for credit

M&L for steel tubular swaged pole complete with cast iron base plate , finial taper plug bolts nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-31 (9 mtr long).

Dismantling and taking down old/unsv cross arms, bracing, supports etc complete for reuse at site or carrying to store for sch of credit all as specified and directed.

Supply and fixing cross arms bracings supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paints complte all as specified and directed.

Dismantling and taking down old/unsv ACSR conductor any size complete for reuse at site or carrying to store for Sch of Credit all as specified and directed.

S/F ACSR conductor incl jointing with existing conductor and straining on LT pole and proper fastening to pin/shackle insulators with aluminium binding wires and required jumpering connection all as dercted.

Dismantling and taking down old/unsv insulator of any type any size from pole/stay for reuse at site or carrying to store for sch of credit complete all as specified and directed.

S&F pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 100mm height and 65 mm dia for 1100 volts grade all as specified and directed.

S&F shackle type,porcelian vitreous white, brown or green insulator including galvanised mild steel straps , washers, insulators bolts ,washer and nuts of size 100 mm height and 115 mm dia for 1100 Volts grade complete all as specified and directed.

S&F Loop type insulator, porcelian vitreous brown of size 65x90mm and clearence hole 16mm all as specified and directed.

M/L for Stay assy using 16mm dia galvanised rod complete all as shown in electrical plate No 1 of SSR Part I incl dismentling unsv one all as specified and directed. (Clamps, loop insulator, earth work, PCC measured separately)

S/F for stay wire using galvanised steel strand of 7/3.15mm complete with necessary binding incl dismentling taking down unserviceable one all as specified and directed

S&F cradle hexagonal /rectangular fabricated with galvanised steel wire not less than 4mm dia on pole incl dismentling taking out unsv cradle guard

S&F earth continuity wire using GI wire not less than 4mm dia on pole incl dismentling taking out unsv GI wire

M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing lead of 25x4 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI strip 25x4mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

M&L for restraining of overhead ACSR conductor of any size of 4 wire 35-45 met span on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed .

M&L for restraining of ACSR conductor of any size of 2 wire 35-45 met span on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed

M&L for restraining of GI Cradle guard hexagonal/rectangular of any size 35-45 met span on pole after disconnecting all binding on cross arms and redoing all bindings providing required T&P all as specified and directed

M&L for restraining of GI earth wire of any size 35-45 met span on pole after disconnecting all binding on cross arms and redoing all bindings providing required T&P all as specified and directed

Cutting/Trimming of tree branches arround 3.00 met distance from conductors of HT over head line of span up to 50 meters including removing of creepers etc fron poles

Cutting/Trimming of tree branches arround 3.00 met distance from conductors of LT over head line of span up to 40 meters including removing of creepers/vegitation etc fron poles

Painting of steel pole any type up to 7.5 met height above ground level including cross arms,clamps,stay clamps etc with two coats of aluminium paint after surface preparation all as directed by Engr-In-Charge

Painting of steel pole any type up to 9.5 met height above ground level including cross arms,clamps,stay clamps etc with two coats of aluminium paint after surface preparation all as directed by Engr-In-Charge

Numbering of HT/LT poles serially with letter/number size width and height up to 40 mm in situ with black paint on white back ground

Supply and fix GI tubing light grade 40mm bore,on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection

Supply only GI tubing light grade 50mm bore on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection, ISI marked, for cable protection

Supply only GI tubing light grade 80mm bore,on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection ISI marked, for cable protection

Supply & fixing 4mm dia Hot Dipped Galvanized Chain Link Fencing with Zinc Coating, including line wires, any type of standards, rails, straining bolts, etc. including provission of binding wire incl dismentling taking down unserviceable one (2.8 Kg per sqm with 2"x2" mess of 3 mm wire)

M&L for mild steel work of angle fixed independently for fencing post and others confirming to Gde Fe 410-A incl cutting to dead end length where required, notching, drilling, fitting and/or welding or connecting with bolts and nuts incl dismentling taking down unsv one complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends or as in horizontal bar for fixing in fencing and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securingwith clips complete for support of chain link fencing incl dismentling taking down unsv one all as specified and directed.

Supply and fix jumper connections of length up to 1.50 met with existing size and guage of ACSR, binding with existing conductors for LT OH lines complete as directed by the Engr-In-Charge.

M & L for Danger notice plate of 1.6mm thick MS sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in singal red colour and fixed with MS clamps, bolts and nuts of approved size, for LT 1100 volts, 25 x 20 cm size

M & L for Danger notice plate of 1.6mm thick MS sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in singal red colour and fixed with MS clamps, bolts and nuts of approved size, for HT 11000 volts, 25 x 20 cm size

Supply and errect Cast Iron HT/LT cable route indicator round shaped 120 mm dia 8 mm thick duly embossed with MES HT/LT Cable fixed on flat iron 25X3 mm thick 300 mm long and grouted in PCC (PCC measured separately)

M/S. Niksun Electro-Infra Private Limited