Renovation and repair of building and colony maintenance building room of Upper Indravati Left Canal Division No. II , Dharmagarh.

Clearing grass and removal of rubbish up to a distance of 50m outside the periphery of the area etc. complete as per the direction of the Engineer-in-charge.

Earth work in ordinary soil within 50m initial lead & the initial lift of 1.50m in all kinds of embankments including rough dressing and levelling the bed & bailing out water etc. complete & as per the direction of the Engineer-in-charge.

Earth work excavation of foundation in ordinary soil within the initial lead of 50m and initial lift of 1.5m including rough dressing and breaking the clouds to maximum 5cm to 7cm & laying in layers not exceeding 0.30m in depth & as per the direction of the Engineer-in-charge.

Filling foundation and plinth with sand including watering and ramming with cost, carriage, royalty etc. complete and as per direction of Engineer in- charge.

Cement concrete (1:4:8) with 40mm size H.g.c.b metals with cost, carriage & Royalty etc. complete as per direction of Engineer in charge .

Dismantling and removing 2.5cm thick Artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50m lead.

Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris within 50m lead.

Cement concrete Grade M15 with 20mm down graded hard granite crusher broken chips of approved quality free from skin materials mixing by concrete mixer including hoisting lowering and laying the concrete in position to proper slope, level and compacting by vibrators in layers not exceeding 0.15m depth and finishing the exposed surface smooth including watering with cost, conveyance, hire and running charges of all machineries, royalty and other taxes of all T & P materials labour etc complete & as directed by the Engineer in Charge.

Providing, strengthening ,cutting ,bending ,fitting & placing uncoated HYSD bar reinforcement & laying in position including cost of binding wire 18mm to 20mm gauge & fixing of reinforcement including lapping (As per steel code)where necessary spot including cost, conveyance, royalty, T&P & all taxes of reinforcement ,etc. complete as directed by the engineer-in charge

Rigid smooth centering and shuttering for concrete work and dismantling after casting with cost, conveyance and taxes of materials and labour charges etc. complete as per the direction of the Engineer-in-charge.

Supplying , Fixing of MS angle (40x40x6) mm size as per drawing , Design as desired by the Engineer-in- charge

Brick work with fly ash Brick's 23cm X 11cm X 8cm size having crushing strength not less than 35 kg / cm2 with dimensional tolerance ±8 % in Cement Mortar (1 : 6) in Super structures with cost, conveyance, taxes, royalty & labour charges etc. complete and as per direction of Engineer-in-Charge.

Supplying, fitting and fixing of GCI sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc including cost of GCI sheets and L hooks.

12mm thick cement plaster ( 1 : 6 ) for brick work with all cost, carriage, Royalty, T & P etc complete as per direction of Engineer-in-Charge.

12 mm thick Cement Plaster in C.M (1:4) with cement punning for skirting including cost of all materials etc. complete

Dismantling and removing doors, windows and ventilators including removal of frame , hinges, fastening and stacking the same foe reuse and removing the debris within 50m lead. Per 1 sqm

Labour for fixing and fitting as M.S. doors, windows and ventilators in proper position and making necessary repair to damage surface including cost, conveyance, royalty, taxes of all materials with all labour etc. complete and as per direction of the Engineer-in-Charge.

MS panelled Window double leaved shutter with MS frame & grill over all size including frame 1220mm(H) X 910mm (W) out of the following materials conforming to relevant ISS frame 35x35x6mm MS angle shutter style Top & bottom rail 25x25x3mm MS angle Window panel 1.00mm CR sheet. Panel stiffener covering width of each leaf 19x5mm MS flat 2 nos on each leaf. Hinges size 100mm 4 nos (2 nos on each side ) bought out as per ISS . Hold fast 35x35x6mm MS angle 100 mm length bifurcated tip 2 nos one each side. Handle 19x5mm MS flat 2 nos fabricated ( inside) . Tower bolt 4 nos bought out as per ISS Horizontal grills 12mm MS round at 100mm spacing etc complete as per direction of Engineer in charge. Approximate weight 39 kg.

M.S. Panelled Door double leaved shutter with MS Frame over all size including frame made out of following materials conforming to relevent IS specifications. Frame- 35x35x6mm MS angle, Shutter style- Top & Bottom rail 25x25x3mm MS angle, Door panel- 1.0mm CR Sheet, Panel stiffener covering width of each leaf:- 19x5mm, MS Flat 3 nos on each leaf, Hinges size:- 100mm- 6nos. (3nos on each side) bought out as per ISS. Hold fast:- 35x35x6mm MS angle 175 mm length bifurcated at the lip 3 nos. on each side, Handle:- 19x5mm MS Flat fabricated 4 nos., Aldrop:- 2 nos. bought out as per ISS. Tower bolt:- 2 nos brought out as per ISS.

Providing and fixing to wall or ceiling and floor rigid UPVC pipes class IV (8 kg f/cm2)/class III (6kgf/cm2) conforming to IS:4985/2000 and pipe fittings of the following nominal bore with clamps including making good the wall ,ceiling and floor all complete as per specification.

Washing and cleaning surface of plastic paint/ cement paint/ distemper wall including cost of painting sponge

Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.

Priming one coat with approved primer (weather coat) including all cost of material, Labour, T & P etc. complete as per direction of Engineer in charage. ( A/R, Item No-1 & Page No-930 ) Data for 9.30 sqm.

Wall painting two coats with weather coat paint approved shade on new work to give an even shade including cost of all materials, labour, taxes etc complete.

Priming 1 coat with any approved as per direction of engineer in charge.

Wall painting two coats with plastic emulsion paint of approved shade in new work to give an even shade including cost of paint etc. complete as per direction of Engineer incharage.Item-20, Page-99 (Data for 10Sqm.)

Priming 1 coat on steel surface with approved primer including cost of primer per 1 sqm. ( AR 2006, P-93, Item No-1).

Painting 2 coats in wood & Iron with approved paint to give an even shade including cost of paint per 1 sqm. ( AR 2006, P-93, Item No-3).

Providing fitting and fixing up partition walling aluminum anodized section No 9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and section 4660 as tapered clip and jointing angle No-1855 etc complete as per direction of engineer in charge including cost of pre laminated board & Glass. (A/R, Page No-239 & Item No-6)

Providing fitting & fixing of false ceilling with Aluminum anodized T section No 3215 with 2'0"centre to centre L section No 1075 up to 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminum grid 2'-0"x2'0" with pre laminated plastic board suspended from ceilling etc complete. As per spl building item of S/R 2012

Wall painting two coats with weather coat paint approved shade on new work to give an even shade including cost of all materials, labour, taxes etc complete.