4. Supply and Fixing of gym equipment at different places, Municipal Board Nathdwara.

Amount

3 IN 1 AIR WALKER + SURF BOARD + SHOULDER BUILDER:- DIMENSIONS: - 2250mm (Length) x 750mm (Width) x 1400mm (Height). SAFE AREA:- 3.3 x 2.0Mtr. Air Walker cum Surf board cum shoulder builder Equipment made from heavy grade G.I. Pipe of different NB. Pipe of different NB. Pipes used of TATA or JINDAL. All pipes are of heavy grade as per IS 1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. Pipes used are properly bend with CNC bending with uniform radius bending & no joints in prime stand & in all accessories. The main frame of 100NB made from G.I. pipe. The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This Sleeve can be disassembled from main frame. The bottom support frame of M.S. 40mm x 75mm x 3mm thick C Channel. The leg movement frame is of 32 NB made from G.I. pipe. The handle frame is of 25 NB made from G.I. pipe. Pipe closing Caps and base covers are made up of SS 304 material to maintain the environment safe and for life long durability against corrosion, ageing, and survival in all seasons, vandalism and theft. Foundation cover Cap is made from SS 304 material. Pins used of Diameter 25mm are made up from SAE 8620 material. Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust. The bearings used are “6001 2RS1” & “6205 2RS1” & “6007 2RS1” permanent lubricated sealed bearing of reputed brand. SS 304 material made nuts & bolts are used for assembly. A24 cerclips are used for assembly. 300mm diameter x 10mm thick plate used for rotating seat of seating twister with 50NB G.I. pipe. The footrests are made from casted Aluminium material, having sizes 130mm X 310mm X 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. It has Bolting provision for mounting on concrete slab. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with minimum 60 to 70 micron thickness. Instruction sticker of size 90mm x 160mm of SS 304 grade plate with 0.8mm thickness duly laser marked printing & riveted on 5 mm thick MS plate. Avoided plastic and printed stickers to have lifelong durability. Safety & Maintenance:-All products of equipment should be tested as per EN16630 safety norms and CE certification must. Maintenance should be followed as per EN 16630 guidelines.

LEG PRESS:- DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height). SAFE AREA: - 2.8 x 1.4Mtr. Leg Press equipment made from heavy grade G.I. pipe of different NB. Pipes used of TATA or JINDAL. All pipes are of heavy grade" as per IS 1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. Pipes used are properly bend with CNC bending with uniform radius bending & no joints in prime stand & in all accessories. The centre pipe is of 100mm NB made from G.I. pipe. The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. The bottom support of M.S. round plate of Ø250 mm & 10mm thick. The remaining outer frame is of 32NB made from G.I. pipe. The foundation used for fixing is structure and made from centre pipe of G.I. of 80mm NB welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm MS square pipe of 3mm thickness. Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. The footrests are made from casted Aluminium material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate. The frame of footrests made up of 25 NB G.I. pipe. Pipe closing Caps and base covers are made up of SS 304 material to maintain the environment safe and for life long durability against corrosion, ageing, and survival in all seasons, vandalism and theft. Foundation cover Cap is made from SS 304 material. To build structure bushes are used which are made from M.S. seamless pipe of 50mm O.D. and 5mm thickness. The pins used are made up of Ø25 mm SAE 8620 material. The bearings used are of “6205 2RS1” permanent lubricated sealed bearing of reputed Brand. SS 304 material made nut bolts are used for assembly. The cerclips used for assembly are of A24 mm. The powder coating done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. Instruction sticker of size 90mm x 160mm of SS 304 grade plate with 0.8mm thickness duly laser marked printing & riveted on 5 mm thick MS plate. Avoided plastic and printed stickers to have lifelong durability. Safety & Maintenance:-All products of equipment should be tested as per EN16630 safety norms and CE certification must. Maintenance should be followed as per EN 16630 guidelines.

SEATED PULLER:- DIMENSIONS: - 1650mm (Length) x 700mm (Width) x 1850mm. (Height). SAFE AREA: - 2.8Mtr x 1.8Mtr. Seated puller equipment made up of “C” class G.I. pipe of different NB. The centre pipe is of 100NB made from “C” class G.I. pipe. Pipes used of TATA or JINDAL. All pipes are of "C" class “heavy grade" as per IS 1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. Pipes used are properly bend with CNC bending with uniform radius bending & no joints in prime stand & in all accessories. Bottom support is of M.S. round plate of Ø 250 mm & 10mm thickness is welded. All linkages are made up of 25NB G.I. pipe of heavy grade. The handle frame is of 32NB G.I. pipe. The seat frame is of 32NB G.I. pipe. To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB. Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm MS square pipes of 3mm thickness. Pipe closing Caps and base covers are made up of SS 304 material to maintain the environment safe and for life long durability against corrosion, ageing, and survival in all seasons, vandalism and theft. Foundation cover Cap is made from SS 304 material. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Pins used of Diameter 25mm and 17mm are made up from SAE 8620 material. The bearings used are of “ 6205 2rs1” and “6203 2rs1” permanent lubricated sealed bearing of reputed brand. SS 304 Material made nuts & bolts are used for assembly. The cerclips used for assembly are of A16. The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness. Instruction sticker of size 90mm x 160mm of SS 304 grade plate with 0.8mm thickness duly laser marked printing & riveted on 5mm thick MS plate. Avoided plastic and printed stickers to have lifelong durability. Safety & Maintenance:-All products of equipment should be tested as per EN16630 safety norms and CE certification must. Maintenance should be followed as per EN 16630 guidelines.

SIT UP BOARD DOUBLE:- DIMENSIONS: - 1700mm (Length) x 1350mm (Width) x 900mm (Height). SAFE WORKOUT AREA: - 2700mm (Length) x 2350mm (Width). The AB Board double made from heavy grade GI pipe. Pipes used of TATA or JINDAL. All pipes are of heavy grade" as per IS 1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. Pipes used are properly bend with CNC bending with uniform radius bending & no joints in prime stand & in all accessories. Centre column made from 100mm NB G.I. Pipe. The main frame is of 25mm NB made from GI pipe. FRP sheet of 3mm thickness is moulded on main frame. The remaining frame of the sit up board is of 32mm NB made from GI pipe. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness. Instruction sticker of size 90mm x 160mm of SS 304 grade plate with 0.8mm thickness duly laser marked printing & riveted on 5 mm thick MS plate. Avoided plastic and printed stickers to have lifelong durability. Safety & Maintenance:-All products of equipment should be tested as per EN16630 safety norms and CE certification must. Maintenance should be followed as per EN 16630 guidelines.

SKY WALKER:- DIMENSIONS: - 1700mm (Length) x 830mm (Width) x 1650mm.(Height) SAFE AREA: - 2.7Mtr x 1.9Mtr. Sky walker equipment made up of pipes of different NB. Pipes used of TATA or JINDAL. All pipes are of "C" class “heavy grade" as per IS 1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. Pipes used are properly bend with CNC bending with uniform radius bending & no joints in prime stand & in all accessories. The main frame pipe is of 80mm NB made from heavy grade material which is bend at the radius of 250mm. The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, pins and handle. The handle frame is of 25mm NB made from pipe. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm MS square pipes of 3mm thickness. Two foundations are provided for rigid support. The footrests made from Aluminium casting material of size 130 X 310 X 5mm. Pipe closing Caps and base covers are made up of SS 304 material to maintain the environment safe and for lifelong durability against corrosion, ageing, and survival in all seasons, vandalism and theft. Foundation cover Cap is made from SS 304 material. Pins are fixed at the outer end with M8 grub screws and Dia.8mm SS ball. The bearings used are of “6205 2rs1” & “6203 2rs1” maintenance free self-lubricated SKF make rubber seal type. Material made nuts & bolts are used for assembly. The cerclips used for assembly are of A24 type. The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. Equipment should be withstand for the weight of user more than 100Kg. Instruction sticker of size 90mm x 160mm of SS 304 grade plate with 0.8mm thickness duly laser marked printing & riveted on 5mm thick MS plate. Avoided plastic and printed stickers to have lifelong durability. Safety & Maintenance:-All products of equipment should be tested as per EN16630 safety norms and CE certification must. Maintenance should be followed as per EN 16630 guidelines.

CHEST PRESS:- DIMENSIONS: - 1550mm (Length) x 710mm (Width) x 2150mm. (Height). SAFE AREA: - 2.7Mtr x 1.7Mtr. Chest press equipment made up of pipes of different NB. Pipes used of TATA or JINDAL. All pipes are of "C" class “heavy grade" as per IS 1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. Pipes used are properly bend with CNC bending with uniform radius bending & no joints in prime stand & in all accessories. The centre pipe is of 100NB made up of heavy grade. The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The connecting pipes are made up from 25NB. The handle frame is made up from 32NB G.I. pipe. Handle grips are made up of High quality soft touch rubber material. To build structure bushes are used which are made from MS seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB “C” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The seats and Back rests of GI material are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness duly deep drawn in tool & dies with uniform radius of 20mm with no sharp edges. Welded permanently with the equipment to avoid future theft, vandalism or damages may occur due to bad handling or misuse. Pipe closing Caps and base covers are made up of SS 304 material to maintain the environment safe and for life long durability against corrosion, ageing, and survival in all seasons, vandalism and theft. Foundation cover Cap is made from SS 304 material. Pins used of Diameter 25mm and 17mm are made up from SAE 8620 material. Bolt M8X16 mm and Nylock nut of M8 are made of Stainless Steel of grade SS 304 anti-rust material used on stainless steel cap mounted on pins to protect bearings and pins from rain and dust. The bearings used are of “6205 2rs1” & “6203 2rs1” maintenance free self-lubricated SKF make rubber seal type. The cerclips used for locking is made up of A24 mm & A16mm. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. Pre-treated with each primer specially used for GI material. Instruction sticker of size 90mm x 160mm of SS 304 grade plate with 0.8mm thickness duly laser marked printing & riveted on 5mm thick MS plate. Avoided plastic and printed stickers to have lifelong durability. Safety & Maintenance:-All products of equipment should be tested as per EN16630 safety norms and CE certification must. Maintenance should be followed as per EN 16630 guidelines.