Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹46.7 L+₹3.4 L (7.86%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹47.9 L+₹4.7 L (10.8%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS Rajouri
REPAIR REPLACEMENT OF ROOF SHEETING, JOINERY AND CERTAIN MISC WORK AT MES INSTALLATION UNDER AGE BR DETT III OF GE 862 EWS
2024_MES_655908_1
GER-25/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS Rajouri
As per Tender Documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹99,800
Yes
22 Sept 2024
25 May 2024
6 Sept 2024
25 May 2024
4 Sept 2024
15 Jul 2024
27 May 2024 - 10 Jul 2024
Amount
Taking down timber roof trusses, coupled rafters or trussed beams of clear span above 4 meter and upto 8 meter, complete all as specified and directed.
Dismantling ballies, hard or soft wood, type 1, any position, except in posts and struts including taking out iron straps, bolts and nuts, etc., complete all as specified and directed.
S&F for rolled mild steel (structural steel) work in roof truss (framed), trussed, purlin, crane gantries, rai;l and fastening and heavy bracket framing (Beam, tee, angle channel or flat section) including distance piece, cleats etc conforming to Fe-410-W, Gde E-250 quality 'A', including cutting to dead length where required, notching drilling fitting, rivting and /or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc also for wedging plumbing, truing up and fixing, also includ for drilling the members for site connections, complete all as specified and directed.
M&L for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc (conforming to Fe-410-W, Gde E-250 quality 'A',) complete all as specified and directed.
S&F of Roof plates with sleeve pieces riveted or welded thereto, and similar roof and ceiling connections, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/ cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions, including dismantling existing sheets in any position or any description, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions, including dismantling existing sheets in any position or any description, complete all as specified and directed.
S&F for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, including dismantling existing sheets in any position or any description, complete all as specified and directed.
M&L for providing PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, includin necessary formwork (straight or curved) complete all as specified and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frames) exc 1.5 Sqm but n. exc 4 Sqm each and removing from site, complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.
S&F for pressed steel door frames of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6, type C-0 using 12.5mm graded crushed stone agregate, complete all as specified and directed.
S&F for pressed steel frame for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges, lock and strike plate etc including back filling of chowkhats with PCC 1:3:6, type C-0 using 12.5mm graded stone agregate, complete all as specified and directed.
Taking down shutter of any description exc 1.00 sqm and n. exc 2.00 sqm in each including resecuring or easing and adjusting etc and refixing in same opening, complete all as specified and directed.
S&F for 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed
S&F for factory made 35 mm thick 2nd class hard wood kiln seasoned and chemically pressure treated glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed.
S&F Box type steel window / ventilators with side hung shutter with glazed and gauzed double panel shutters both provision including box type hinges or factory made butt hinges with steel handle, tower bolts, hold fasts and steel peg stays etc complete with glazing bars dovetailed or welded and 10mm square guard bars, complete all as shown in Drg No. CEUZ/TD/1302/2009, and all as specified and directed. Note:- Wire cloth and glass shall be measured and paid deparately under respective items of schedule.
S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares or rectangle n . exc 0.50 sqm in each pane complete all as specified and directed.
S&F for 4 mm thick sheet glass ordinary quality and glazing with aluminium snap beading to aluminium window/ door / ventilators, complete all as specified and directed.
S&F for 4 mm thick figured glass pin headed type and glazing with oil putty in squares n . exc 0.50 sqm in each pane complete glass all as specified and directed.
S& F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with galvanised steel wire staples including cutting, welding etc for steel window / ventilators, complete all as specified and directed.
S&F of Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
M&L for providing PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, includin necessary formwork (straight or curved) complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.
S&F for aluminium handles 150 mm long, cast type, anodised, (ISI marked) ,complete all as specified and directed.
S&F for 250mm long stailess steel sliding door bolt with hasp, staple (bolt type) and fixing bolt with cast or extruded sections (ISI Marked), complete all specified and directed.
S&F for 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing bolt with cast or extruded sections (ISI Marked), complete all specified and directed.
M&L for preparation of new / previouly untreated wooden surfaces of any description not otherwise described, exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.
M&L for preparation of new / previouly untreated steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with stack clamps of size 50x5mm flat iron & 16mm dia round iron stay including bolts & securing ends of stay, complete after dismantling of old unserviceble PVC pipe all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specifically provided for including removal of debris outsidse MoD land, complete all as specified and directed.
M&L for providing precast cement concrete 1:2:4, type B-1 (20mm grade crushed stone aggreagte) as in cover slab, manhole cover, chajjas, chullah hoods, water troughs, mangers, shelves etc and similar articles with plain faces, set in cement mortar 1:6 including demolition of old RCC work, complete all as specified and directed.
M&L for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floor and paving n exc 15 cm thickness below or above the ground level including removal of debris outside MoD land complete all as specified and directed.
M&L for Hardcore of gauge n exc. 63 mm aggregate of broken stone boulders for plinth course, sub base, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.
M&L for 75mm plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base, complete all as specified and directed.
M&L for 25mm thick plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in levelling course of floor for laying floor finish, complete all as specified and directed.
M&L for Machine cut kota stone slab(mirror polished) flooring 18-22mm thick in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar 1:6 of any size after dismantling old unserviceable of kota stone, complete all as specified and directed. Note:- (i) The size of kota stone slab shall not be less than 550mm x 550mm in floor. (ii) Single piece kota stone slab shall be provided in all tread with anti skidding provision and edge shall be bull nosed.
M&L for Machine cut kota stone slab (mirror polished) flooring 18-22mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 10 mm thick in cement mortar 1:3 after dismantling old unserviceable of skirting, complete all as specified and directed. Note:- (i) The size of kota stone slab shall not be less than 550mm x 550mm in floor. (ii) Single piece kota stone slab shall be provided in all tread with anti skidding provision and edge shall be bull nosed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of size 350x 250x7mm or 450x350x7mm thick, (premium quality) on vertical surface such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10 mm thick backing layer of cement plaster in cement mortar 1:3 including dismantling of existing tiles complete all as specified and as directed.
M&L for 18-20mm thick granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, cooking platforms, in steps, pillars, window cills, etc, laid over 20mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges cutting, polishing etc, including dismantling of existing old granite stone slab, complete all as specified and as directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 including demolition of old brick work built in any mortar, complete all as specified and directed.
Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick (in two layers) in cement mortar 1:4 on fair faces of brick work or concrete surface with and including mixing of liquid water proofing compound as per manufacturer's instruction, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note:- Rate of WPC will be included in the quoted rate.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair other than faces of brick work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 05 mm thick in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement, complete all as specifed and directed.
M&L for scraping out loose mortar /concrete by chiseling / wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer) as per manufacturer's instruction providing and fixing of wire mesh of weight 2.5 kg/sqm and apply 25mm avarage thickness in CM 1:4 mixed with liquid water proofing compound (complast 'X' recommended by the manufacturer with gunintting machine at a pressure not less than 5Kg/sqcm finally rendering 10mm thick plaster in CM 1:4 using liquid integral water proofing compound (complast 'X' 421) in the proportion recommended by the manufacturer, complete all as specified and directed.
M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of cement base primer, complete all as speicied and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer, complete all as specified and directed.
M&L for complete removal of existing treatment from old plastered wall surface and applying two coats of oil bound distemper over a coat of cement base primer over 1.5mm thick wall care putty including preparation of surface, complete all as speicied and directed.
M&L for preparation of newly plastered surface of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicin additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/ 10sqm, complete all as speicied and directed.
M&L for complete removal of existing treatment from old plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicin additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/ 10sqm, complete all as speicied and directed.
S&F for 15 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc including taking down old GI tubing, complete all as specified and directed.
S&F for 20 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc including taking down old GI tubing, complete all as specified and directed.
S&F for 25 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc including taking down old GI tubing, complete all as specified and directed.
S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe 32mm dia high density, complete all as specified and directed.
S&F in repair for 20mm bore gun metal globe or gate valve with iron wheel screwed both ends for iron pipe including necessary cutting /threading of pipe with GI fiitings such as socket, union, tee, elbow etc, complete all as specified and directed.
S&F in repair for 15mm bore Angle valve, cast copper alloy, fancy type, chromium plated suitable for iron pipe and one end and PVC connector on other, complete all as specified and directed.
S&F in repair for 15mm bore bib tap, CP, cast copper alloy with capston head, long body, fancy type with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair for viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern), complete all as specified and directed.
S&F in repair 15mm CP brass health faucet (hand shower) ABS body with 1.25m long flexible tube and ABS wall hook including making connection and fixed in position etc, complete all as speicified and directed.
S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including connections to antiphonage pipe etc flushing cistern with flush pipe, complete all as specified and directed.
S&F in repair for vitreous china wash hand basin white, flat back, size 600x480mm size including S&F angle iron brackets errecting stand, CP waste coupling 32mm dia & waste pipe 900mm long, complete all as specified and directed.
S&F repair for PVC connection 15 mm x 600 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed.
S&F in repair for chromium plated brass shower rose of size 125 mm with swivel joints fixing to steel pipes etc. Complete as in repair all as specified and directed.
S&F in repair for brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange, aluminium anodised, complete all as specifed and directed.
S&F in repair for 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair for CP towel ring fixed with CP brass screws & wooden/ plastic cleats, complete all as specified and directed by Engr-in-Charge.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple after dismantling of old unserviceable tank, complete all as specifed and directed.
S&F in repair for ball valves suitable for 25mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 4552 gms) complete all as specified and directed by Engr-in-Charge.
Stainless steel raised Expanded metal weight not exc 4 Kg /Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples/ nut, bolts supplied and fixed complete to wood or steel members, complete all as specified and directed. Note:- Pattern shall be approved by Engr-in-Charge.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra, complete all as specified and directed.
M&L for pre-polished coloured chequered cement concrete tiles of size 30 cm x 30cm x 25 mm thick set, jointed in neat cement slurry in floor and pointed in white or coloured (apporved by GE) cement to match the shade of tiles laid over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and as directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as post embedded in concrete, brick work, masonry work etc,complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface in any type of soil, complete all as specified and directed.
S&F for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165, embedding in concrete, complete all as specified and directed. Note :- (i) Size of angle shall be as per standard drgs. (ii) Earth work and concrete shall measured & paid for separately under respective items of this BOQ.
M&L for plain cement concrete, 1:4:8, type D-2, (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concrete, complete all as specified and directed.
Supply only mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, for securing chain link fencing ncluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Supply only mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but n exc 10cm long and diameter of neck 11 to 15mm, complete all as specified and directed.
Dismantling of old unserviceble fencing wire mesh, including round bars any type, complete all as specified and directed.
Supply only for mild steel galvanised PVC coated chain link fencing with 3.15mm nominal dia of GI wire 1.4mm thick PVC coating and average area of aperture 25 Sqcm with weight of chain link not less than 3.6 Kg/Sqm, complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size & type to standards, rails, straining bolts, round bar etc including provision of binding wire, complete all as specified and directed. (Note: 10mm dia round bars and nut, bolts, screws shall be measured and paid separately under respective items of this BOQ).
S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) after dismantling of old unserviceble barbed wire complete all as specified and directed.
M&L for preparation of new / previouly untreated steel surface n. exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
S&F for mild steel work in framed and hung gates, including pintle hinges, stops, hand-made sliding bolts, etc and similar work confirming to Fe 410-O or Fe 310-O, including dismantling of old structural steel work of any description, complete all as specified and directed.
M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in surface channel and drains including necessary formwork including demolition of old PCC drains etc, complete all as specified and directed.
M/S RAHUL GUPTA (BID ID -3070552)
M/s Anil Engineers & Builders (BID ID -3075752)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .