REPAIRS REPLACEMENT OF INTERNAL ELECTRIFICATION DISTRIBUTION SYSTEM INCLUDING FIXTURE AND FITTINGS, WIRING AND CONNECTED ALLIED WORKS AT ZONE - I TECHNICAL AREA UNDER GE I RND RCI HYDERABAD

Amount

Taking down point wiring of any description from surface/concealed conduit for light, fan, socket or power complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials from site and making good disturbed surfaces of walls, floors, etc., to match with the existing complete all as directed.

M&L, Point wiring complete with FRLSH PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) and accessories fixed to surface of walls/roof/ceiling with PVC sleeve/dash fastener and cadmium plated screws etc., with and including modular metal flush boxes made out of 1.6mm mild steel sheet with modular plate and frame for mounting of switches, socket outlets, regulators etc., complete including provision of FRLSH PVC insulated unsheathed 1.5Sqmm solid copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:- Note: Quoted rate shall be deemed to include cost of Modular flush boxes, cover plate and frame.

One light/fan point controlled by one, one way switch, 5/6 Amps

One socket outlet, 3 pin, 5/6Amps, controlled by one way switch on same board with other switches.

One socket outlet, 3 pin, 5/6Amps, on independent board controlled by one way switch.

All as per item No. 2 above but with 2.5Sqmm FRLSH cable for 5pin 15Amps socket outlet on independent board and 2.5Sqmm FRLSH cable for the earth continuity conductor

S&F, Modular Switch 1 way 6Amps, 1 Module, 240V, ISI Marked complete all as specified and directed

S&F, Modular Switch 2 way 6Amps, 1 Module, 240V, ISI Marked complete all as specified and directed

S&F, Modular Switch 1 way 16Amps, 1 Module, 240V, ISI Marked complete all as specified and directed.

S&F, Modular Socket, 6Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F, Modular Socket, 6/16Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F, Modular step type fan regulator, 120W, 2 module complete all as specified and directed.

S&F, Ceiling rose, surface type Bakelite, three terminal 65x50mm, ISI marked complete all as specified and directed.

M&L in repairs, Sub main wiring with 2runs of single core 4Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 4sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

M&L in repairs, Sub main wiring with 2runs of single core 6Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note for item No 11 & 12: Two runs of cable, one run of earth continuity conductor and one run of PVC casing and capping shall be measured as unit length.

M&L in repairs, Sub main wiring with 4runs of single core 6Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 25mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note: Four runs of cable, one run of earth continuity conductor and one run of PVC casing and capping shall be measured as unit length.

S&F in repairs, Ultra bright 9W LED PL-L lamp with very high efficacy suited for installation in existing 2G11 lamp holders complete all as specified. Make: Havells Cat No PHOTONULTRAPLL222TL9WLED 865SPC or techno commercially equivalent of Phillips / Wipro

S&F in repairs, Ultra bright 18W LED PL-L lamp with very high efficacy suited for installation in existing 2G11 lamp holders complete all as specified. Make: Havells Cat No PHOTONULTRAPLL419TL18WLED 865SPC or techno commercially equivalent of Phillips / Wipro

S&F in repairs, 15watt LED recess mounted luminaire suitable for Armstrong/POP ceiling with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLUTO1X1PLR15WLED857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, recess mounting 42W LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No: VENUSNEOHE2X2R18-42WLED857 MODUGR<19 along with Driver LEDDRIVER36V1A42WS or Philips CAT No RC 380 B LED 43 S-6500 G5 L60 W60 PSU OD or Techno commercially equivalent in Wipro

S&F in repairs, recess mounting 28W LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No: VENUSNEOHE4X1PLR28WLED 857S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, flat panel 1x1, 15watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLUTOSURFACE1X1PLS15WLED 857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, flat panel 2x2, 42watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLANOSURFACE2X2PLS42WLED 857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, flat panel 4x1, 42watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLANOSURFACE4X1PLS42WLED 857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, decorative recess mounted 2 W LED 3000K spot light for low ceiling height applications suitable for Armstrong/Grid ceiling complete with all accessories complete all as specified. Make: Havells Cat No LHLDAUSADD8U002 or Techno commercially equivalent in Philips/Wipro

S&F in repairs, recess mounted 3 W LED 6000K deep spot light for low ceiling height applications suitable for Armstrong/Grid ceiling complete with all accessories complete all as specified. Make: Havells Cat No LHEEBCPFUN1W003 or Techno commercially equivalent in Philips/Wipro

S&F in repairs, recess mounted 6 W LED 6500K swivel spot light for low ceiling height applications suitable for Armstrong/Grid ceiling complete with all accessories complete all as specified. Make: Havells Cat No LHEEGBPFIH1W006 or Techno commercially equivalent in Philips/Wipro

S&F in repairs, recess mounted 10W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No INTEGRANEODLR10WLED840S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, recess mounted 15W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No INTEGRANEODLR15WLED840S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, recess mounted 24W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No INTEGRANEODLR24WLED840S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, recess mounted 45W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No SPARKLEPROFIXDLR45W857MOD 60DWHTNEEM with L.SPARE LED DRIVER 45W 36V 1100mA or Techno commercially equivalent in Philips/Wipro

S&F in repairs, CMRI certified 2X20W LED flame proof tube light fitting with IP65 protection and with all accessories complete all as specified. Make: Crompton Greaves Cat No EXTN2LT8-20 or Techno commercially equivalent in Shyaam/Baliga/Sudhir

S&F in repairs, flame proof 60W LED well glass light fitting in die cast Aluminum housing with heat resistant toughened glass IP65 protection, recommended for gas/vapor group of IIA & IIB suitable for operating voltage range of 150V to 265V with a reputed driver, certified by CIMFR, ISI marked complete as specified. Make: Crompton Greaves Cat No FWL1315-60-CDL or Techno commercially equivalent in Shyaam/Baliga/ Sudhir

S&F in repairs, suspension mounting 36W LED luminaire with primary suspension kit and main cable, high brightness SMD LEDs complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No LICONLP36WLED840SPCGRY with LICONSUSKITWITHMAINSCABLE or Techno commercially equivalent in Philips/Wipro

S&F in repairs, LED Highbay not less than 120W powder coated light fitting suitable for suspension mounting at any height in Hangers/Workshop with aluminum alloy pressure die cast housing and control gear box with high efficiency long life LEDs with lumen output not less than 15000lm, CCT 5700 K or above with specified beam angle to ensure better uniformity of light distribution, IP65 Protection and impact resistance of IK07, built in electronic driver, lower THD, open circuit protection, over surge and voltage protection complete with all accessories complete all as specified. Make: Havells CAT No. SAUCERGENXPROHBP120WLED 757P60DBOLTG or Philips CAT No BY515P LED150S 5700 NB PSU GR or Techno commercially equivalent in Wipro.

Note: 1. Rate quoted shall be deemed to include the cost of necessary hydraulic ladder or aerial access platform mounted on vehicle for fixing the light fittings.

Note for item No 16 to 21, 28 to 32: Contractor shall produce LM-79 and LM-80 certificate for the luminaires supplied by OEM and genuinity of purchase from manufacturer before claiming any payment. BIS R No. is mandatory for LED light fixtures/drivers. LED fixture and driver should be of the same manufacturer.

S&F in repairs, 3pole 63Amp MCCB, 16KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 03 or equivalent in L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 4 pole 63Amp MCCB, 16KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 13 or equivalent in L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 3pole 125Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 46 or equivalent in L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 4pole 125Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 56 or equivalent in L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 3pole 200Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4202 08 or equivalent in L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 4pole 200Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4202 18 or equivalent in L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 4pole 400Amp MCCB, 36KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4220 07 or equivalent in L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 4pole 630Amp MCCB, 50KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4220 09 or equivalent in L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, MCB, SPN, 40 to 63Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4086 18 to 4086 20 or equivalent in L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, MCB, SP, 6 to 32Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4085 87 to 4085 95 or equivalent in Siemens / L&T / Schneider/C&S as approved by GE

S&F in repairs, Isolator TP, 40Amps, 415volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4065 10 or equivalent in Siemens / L&T / Schneider/C&S as approved by GE

S&F in repairs, Isolator TP, 63Amps, 415volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4065 11 or equivalent in Siemens / L&T / Schneider/C&S as approved by GE

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 4Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 8Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 12Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed. Make for item No 46 to 48: Legrand/L&T/ Siemens/ Schneider/C&S as approved by GE

S&F in repairs, factory made sheet metal enclosure distribution board (MCB DB) SPN 8Way, with 100amps rated copper bus bar, neutral link and earth bar, metal door, powder coated, suitable for use on 240V, 50Hz supply, IP 43 IK 09 protection, MCBs used as out going, making good disturbed surfaces to match with existing complete all as specified and directed. Make: Legrand CAT No 5076 11 or equivalent in L&T/ Siemens/ Schneider/C&S as approved by GE

S&F repairs, CRCA sheet metal enclosure with metal clad plug and socket single phase with a two pin and earth plug & socket suitable for surface/flush mounting, 240V, 20Amp capacity controlled by and including one No 20Amp MCB SP 10KA complete all as specified and directed.

M/s ANUSHA ENTERPRISES

Richcon Engineers

SHRI GANESH ENTERPRISES

SUN LIGHT HOUSE

SHANTI MARKETING AND SERVICES

SUPREET CONSTRUCTIONS