zone-01 ward-103 Parade ke antargat nayi Sadak Sthith Primary Composite school Naughara ke kayakalp ka Karya

NA-S31016-Non SOR-Non SOR Supply and fixing of anodized aluminium partition having 2mm thick aluminium. Section, partly glazed and partly 12mm thick laminated board. Aluminium board size 83.50x44.65mm as vertical member and 11.40x44.45 as bottom and horizontal member with all fitting, glass panes of 4mm thick handle and locks complete.-Rate-3530.54 per 1 Sqm.

11.23-FS14012-FLOORING WORK-11.23 Providing and fixing 18 mm thick Granite (gang saw cut), mirror polished Providing and fixing 18 mm thick Granite (gang saw cut), mirror polished, premoulded and prepollshed, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), Joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Slab area upto 0.50-Rate-3500.00 per 1 Sqm.

13.1.1-FS13001-PLASTER AND PAINTING-13.1.1 12 mm cement plaster of mix 1:4 (l cement: 4 fine sand} 12 mm cement plaster of mix :-Rate-182.00 per 1 Sqm.

NA-F13012-PLASTER AND PAINTING-Providing and applying white cement based putty of average thickness of 1mm of approved brand and manufacture over the plaster wall surface to prepare the surface Providing and applying white cement based putty of average thickness of 1mm of approved brand and manufacture over the plaster wall surface to prepare the surface even and smooth including cost of material labour-Rate-132.00 per 1 Sqm.

NA-S15027-PAINTING AND DISTEMPERING-New Finishing walls with exterior emulsion paint (Apex) Finishing walls with exterior NA-S15027-PAINTING AND DISTEMPERING-New Finishing walls with exterior emulsion paint (Apex) Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/l0sqm including one coat of primer applld @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required fororooer comoletlon of work.for two coat.-Rate-132 per 1 Sqm.

11.46.2-FS14010-FLOORING WORK-Providing and laying Vitrified tiles In different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % Size of TIie 600x600 mm Providing and laying Vitrified tiles In different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, In all colours & shade, In skirting. riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), Jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the init with white cement & matching pigments etc. complete.-Rate-1024.00 per 1 Sqm.

NA-S12007-CEILING AND LINING-New Same as above but with decorative ceiling tiles. Perforated celling tiles : Providing and fixing In position teak wood perforated particle board celling tiles bonded with B.W.P. type Phenol formaldehyde synthetic rains tile In size 60x60x12mm over kall wood timber frame of 50x30mm section and uspended from the roof with the help of flat Iron hangers of size 20x44mm on under side leaving and expansion gap of 6mm and with provision for providing necessary fighting fixtures Including three coats of flat oil paint of approved quality and shade and a coat of pink prlmer/copal varnish of the side facing the roof as per direction given by Engineer-In-Charge.-Rate-1350 per 1 Sqm.

Non-Sor-F31048-Non SOR-s/f L.E.D. tube light with batten suitable for upto 1x22 watt LED with all fittings etc all comp s/f L.E.D. tube light with batten suitable for upto 1x22 watt LED with all fittings etc all comp-Rate-1020 per 1 nos.

NA-S31026-Non SOR-Non SOR Supply and installation of 1.5Hp submersible pump-Rate-76580 per 1 Job

na-F31029-Non SOR-chair chair of branded-Rate-1500 per 1 Each